Second order elastic anomalies in barium titanate from orthorhombic to rhombohedral phase transition

The anomalies in second order elastic constants have been derived for barium titanate for the phase transition from orthorhombic to rhombohedral state. The equilibrium values of order parameter, strain variables and fluctuations in order parameter have been derived using stability conditions and Landau-Khalatnikov equations respectively. Expression for shift in specific heat is obtained. All the anomalies in second order elastic constants have been derived and relations among them reported. The numerical values of anomalies in the individual constants are calculated and their variation is represented graphically. Changes in elastic constants occur over a range of temperature of the order 10⁻²K.     

Second order elastic anomalies in barium titanate from cubic to tetragonal phase transition

The anomalies of the second order elastic constants have been derived for barium titanate for the phase transition from cubic to tetragonal. The equilibrium values of the components of the order parameter and the strain variables have been obtained from the stability conditions. The fluctuations in the order parameter have been derived from the Landau-Khalatnikov equations. Expression for the shift in the zero point energy in the tetragonal phase is obtained and is shown to be proportional to (T −T _c)². The anomalies for all the second order elastic constants have been derived and relations among them reported. It is shown that the second order elastic anomalies suffer a discontinuity at the transition temperature.     

Elastic anomalies in strontium titanate

The anomalies of the second and third-order elastic constants have been considered for the phase transition of strontium titanate within the framework of Landau’s theory. All the anomalies of the second-order elastic constants have been obtained in a single formula using Kronecker delta functions and relations among them have been established. The real parts ofC*₁₁ andC*₄₄ decrease steeply across the transition temperature and thereafter flatly tend to their asymptotic values in the low temperature phase agreeing qualitatively with experimental observations. We have also derived expressions for the third-order elastic anomalies and discussed the temperature variation of the real part ofC*₁₁₁. We have derived expressions for the attenuation of the longitudinal and transverse waves along certain simple symmetry directions and have shown that there is nearly good agreement with experimental observations.     

Third-order elastic constants and pressure derivatives of the second-order elastic constants of β-tin

The second- and third-order elastic constants and pressure derivatives of second-order elastic constants of tetragonal β-tin have been obtained using the deformation theory. The strain energy density derived using the deformation theory is compared with the strain dependent lattice energy obtained from the elastic continuum model approximation to get the expressions for the second- and third-order elastic constants. Higher order elastic constants are a measure of the anharmonicity of a crystal lattice. The 12 non-vanishing third-order elastic constants and the six pressure derivatives of the second-order elastic constants in tetragonal β-tin are obtained in the present work and are compared with the available experimental values. The second-order elastic constant C₃₃ obtained in the present study is in reasonable agreement with the experimental values. The third-order elastic constants are generally one order of magnitude greater than the second-order elastic constants as expected of a crystalline solid. The third-order elastic constant C₃₃₃ is higher in magnitude than all other values. This shows a greater anharmonicity of β-tin along the c-axis direction of the crystal.     

The second and third order elastic constants of alkali metals

The second and third order elastic constants of the alkali metals have been calculated on the long wave method using the Heine-Abarenkov lacal model potential with different exchange-correlation corrections. It is found that the use of an exchange correlation correction which satisfies the compressibility sum rule leads to a good agreement between the calculated and measured second order elastic constants of the alkali metals Na, K, Rb and Cs. The shear elastic constants however come out correct even if the compressibility sum rule is violated by the exchange-correlation correction. The third order elastic constants and the pressure derivatives of the second order elastic constants and the pressure derivatives of the second order elastic constants calculated on the HA local potential are lower than the experimental values at room temperature. The discrepancy is pronounced for the heavier alkali metals. Similar calculations using the Wallace potential for Li, Na and K and the Schneider-Stoll potential for Rb give the pressure derivative in good agreement with experiment. In view of the important role by the exchange correlation correction, Suzuki's results calculated without taking this correction into account can only be accepted with some reservation.     

Single crystal elastic constants and magnetoelasticity of holmium from 4·2 to 300 K

The five independent elastic coefficients of holmium single crystals have been determined by means of an ultrasonic pulse technique at a frequency of 10 MHz, between 4·2 and 300 K. From the elastic constants the temperature variation of the directional adiabatic compressibilities, the limiting Debye temperature and the elastic anisotropy ratio were calculated. The elastic coefficients exhibit anomalies at the magnetic ordering transitions known to occur in holmium. Anomalous behavior in the elastic constants was also observed at about 80 K. The limiting value of the Debye temperature was found to be 191·5 K. The present measurements of the elastic constants, and the reported magnetostriction and thermal expansion data, enabled the calculation of the magnetoelastic contribution to the total Hamiltonian of holmium in the magnetically ordered states. A very small discontinuity in the temperature dependence of the magnetoelastic energy was observed at the Curie point of holmium. Below the Neel temperature, the magnetoelastic energy varies smoothly with decreasing temperature, attaining a value of ?2·13 J cm^?3 at liquid helium temperature. The temperature dependence of the magnetoelastic energy in the vicinity of the Curie point in holmium suggests that the magnetic transition from the antiferromagnetic arrangement into the ferromagnetic state is of second order.     

Higher order elastic constants and generalized Gruneisen parameters of elastic waves and low temperature thermal expansion of gadolinium

Expressions for the higher order elastic constants are derived using the sublattice displacements to the second degree in strains. These expressions are used to obtain the higher order elastic constants and their pressure derivatives in gadolinium. The higher order elastic constants are used to find out the generalized Gruneisen parameters of the elastic waves propagating in different directions in gadolinium. The Brugger gammas are evaluated and the low temperature limit of the Gruneisen gamma is obtained. The results are compared with the available reported values.     

Third order elastic constants of V3Si and V3Ge

General expressions have been derived for the second order elastic constants and third order elastic constants of the A-15 structure compounds with the nearest neighbour central interaction. The second order elastic constants, the third order elastic constants and the pressure derivatives of the second order elastic constants of V₃Si and V₃Ge are reported and compared with the available experimental measurements.     

Third-order elastic constants of the alloy Fe72Pt28

The complete sets of second- and third-order elastic constants of the cubic Fe₇₂Pt₂₈ have been obtained using the strain energy density derived from interactions up to three nearest neighbours of each atom in the unit cell. The finite strain elasticity theory has been used to get the strain energy density of Fe₇₂Pt₂₈. The strain energy density is compared with the strain-dependent lattice energy density obtained from the continuum model approximation and the expressions for the second- and third-order elastic constants of Fe₇₂Pt₂₈ are given. The second-order potential parameter is deduced from the measured second-order elastic constants of Fe₇₂Pt₂₈ and the third-order potential parameter is estimated from the Lennard-Jones inter-atomic potential for Fe₇₂Pt₂₈. The inter-lattice displacements; the three independent second-order elastic constants and the six independent third-order elastic constants of Fe₇₂Pt₂₈ are also determined. The second-order elastic constants are compared with the experimental elastic constants of Fe₇₂Pt₂₈. We also study the effect of pressure on the second-order elastic constants of Fe₇₂Pt₂₈.     

Higher order elastic constants of alkali halides

The Coulomb, van der Waals and repulsive lattice sums occurring in the higher order elastic constants up to sixth order have been calculated for the rocksalt and cesium chloride structures. Numerical values of the static elastic constants up to sixth order based on a rigid ion model with van der Waals and Born-Mayer type central force interaction between first and second nearest neighbors are calculated for several alkali halides representing both structure types. Fair agreement with the available experimental third and fourth order elastic constant data is found.     

Temperature dependence of elastic constants for ionic solids

In this paper the thermal variation of volume for NaCl, KCl, MgO and CaO has been investigated on the basis of Anderson model. We have evaluated the values of elastic constants C₁₁, C₄₄ and K_T at different temperature on the basis of Murnaghan and Tallon models. Tallon's model with second approximation presents slightly better agreement with experimental results which shows that the Anderson–Grüneisen parameter is directly proportional to the volume ratio. Tallon's model can be used to evaluate the values of elastic constants for solids at different temperatures.     

Third-order elastic constants of ZnS and ZnSe

The complete set of non-vanishing third-order elastic constants of the semiconductors ZnS and ZnSe is obtained theoretically. The strain energy density is estimated using finite strain elasticity theory by considering the interactions up to two nearest neighbours of each atom in the unit cell of these compounds. This energy density is compared with the strain dependent lattice energy density from the continuum model approximation. The second-order parameter of the potential function φ is obtained from the measured principal axis C_ij. The third-order potential parameter is estimated by assuming a Lennard-Jones type of interatomic potential. The interlattice displacements as well as the second-order elastic constants are evaluated along with the six third-order elastic constants of ZnS and ZnSe. Using these second- and third-order elastic constants of ZnS, the pressure derivatives of second-order elastic constants are evaluated. The second- and third-order elastic constants of ZnSe are compared with the available experimental values. The third-order elastic constants show anisotropy in different directions.     

Internal strain parameter of silicon and GaAs and planar force constants

We show that the internal strain parameter ζ and elastic constants of the tetrahedral semiconductors can be determined from the force constants between planes of atoms. These have been computed recently for Si and GaAs from self-consistent electronic calculations using the Hellmann-Feynman theorem. The theoretical results are ζ = 0.72 for GaAs and ～0.57 for Si compared to experimental values of 0.76 and 0.73.     

Temperature derivatives at constant volume of the elastic constants of alkali halide crystals

A new method has been developed for calculating the temperature derivatives at constant volume of the elastic constants of the alkali halides using the concept of phonon pressure. Calculated values of temperature derivatives of elastic constants are compared with the corresponding values recently derived from ultrasonic experimental data.     

The effect of hydrostatic and uniaxial pressure on the elastic constants of cadmium

The third order elastic constants of the hep metal cadmium have been determined from measurements of the hydrostatic and uniaxial pressure dependences of the velocities of ultrasonic waves propagated through single crystals. The hydrostatic pressure dependences of the second order elastic constants have also been obtained. The compression of cadmium has been estimated by extrapolation of the data up to high pressures by using the Murnaghan equation of state. Using the generalised Grüneisen theory in the quasiharmonic approximation, the long wavelength acoustic mode Grüneisen parameters have been obtained; the mean acoustic mode parameter is compared with the thermal Grüneisen parameter. In general the anisotropy of the vibrational anharmonicity of the acoustic modes is found to be consistent with the deviation of the c/a ratio of cadmium from that expected for an ideally close-packed metal.     

“Force theorem” and elastic constants of solids

The so-called “Force Theorem” derived by Andersen describes how the change in the total energy of an electron system can be calculated to first order in a virtual displacement. It is demonstrated here, how this theorem can be applied in calculation of elastic constants of crystals although this in fact requires calculation of total-energy changes accurate to second order in the distortion parameter.     

Second-order elastic constants of copper and silver

The second order elastic constants of copper and silver have been calculated by the method of homogeneous deformation from a total energy expression. The overlap energy has been considered by Moriarty potential. A good agreement between computed and experimental values is found except C12 of silver.     

Gyrotropic and piezoelectric coefficients and attenuation of elastic waves in BaTiO3

Using Landau theory of phase transition, expressions for gyrotropic coefficients and piezoelectric coefficients are obtained for barium titanate in the tetragonal phase. Both coefficients vanish at the ferroelectric phase transition temperature. The piezoelectric coefficients tallied with the literature values. The attenuation coefficients for elastic waves propagating along the principal directions in tetragonal, orthorhombic and rhombohedral phases are derived based on Landau theory. It is predicted that there will be slight amplification for both longitudinal and transverse modes in the rhombohedral phase at a temperature close to the rhombohedral phase transition temperature.     

Concentration dependences of the elastic constants of the two-dimensional graphene-silicene system

The concentration dependences of the elastic constants of the two-dimensional Si _x C_{1 − x} system have been investigated with the use of the Harrison bonding-orbital method and the Keating model. The central and non-central force constants and the Grüneisen parameter have been considered by means of the bonding-orbital method. All quantities under consideration have been shown to exhibit a nonlinear behavior during the transition from graphene to silicene. A nontrivial role of the short-range repulsion has been discussed. The second-order and third-order elastic constants, the pressure dependences of the second-order elastic constants, as well as the Poisson’s ratio and Young’s modulus have been investigated in the Keating model. It has been found that the elastic constants and Young’s modulus change almost linearly upon the transition from graphene to silicene, whereas the other quantities under consideration exhibit nonlinearity.     

Lattice dynamics,third order elastic constants and thermal expansion of Cadmium

The lattice dynamics, second and third order elastic constants, pressure derivatives of the second order elastic constants and the temperature variation of the lattice thermal expansion of Cadmium have been worked out utilising Keating's approach. The ten TOE constants are calculated using four anharmonic parameters. The model used here reproduces the measured pressure derivatives of the SOE constants of Cadmium extremely well. The low temperature limit of the volume Gruneisen function γ_L is found to be nearer to the value of Andres. The high temperature limit γ_v(T) is in good agreement with the value calculated by Gschneidner Jr. from the Cv data for Cadmium. The lattice dynamics of Cadmium is found to be essentially similar to that of Zinc.