Redox-assisted asymmetric ostwald ripening of CdSe dots to rods

The redox-assisted asymmetric Ostwald ripening of dots to rods was observed upon annealing a concentrated dispersion of CdSe nanocrystals (NCs) containing 0.1 M CdCl2 in 3-amino-1-propanol (APOL)/H2O (v/v = 9/1) at 135 degrees C. Transmission electron microscopic investigation, along with UV-vis and photoluminescence results, revealed that, while the length of these NCs increased upon annealing, their diameter remained constant. The surface oxidation of NC Se atoms to SeO2 and its subsequent dissolution into the basic APOL/H2O mixture as SeO32- was found instrumental for such dot-to-rod transformation. The amine-assisted SeO2 reduction to Se0 (as confirmed by X-ray photoelectron spectroscopy and X-ray diffraction results) provides the Se source for further NC growth. The preferential growth along the c-axis leads to the formation of rods with zinc blende CdSe structure at its growing ends, due to the low-temperature growth conditions.     

Synthesis of Zinc Blende CdTe Nanocrystals and Facile Shape Conversion from Multipods to Dot-shaped Particles

Branched CdTe nanocrystals with zinc blende structure were directly synthesized in the early growth stage at a high initial concentration of cadmium precursor and a high molar ratio of Cd precursor to Te precuesor. Activation of the cadmium precursor by octadecylamine was found to be critical for the formation of branched CdTe nanocrystals. Furthermore, these as-prepared CdTe nanocrystals can evolve into nearly monodisperse dots through Ostwald ripening and still keep strong photoluminescence. These results manifest a new route to synthesize branch- and dot-shaped CdTe nanocrystals with zinc blende structure.     

Theoretical characterization of triangular CdS nanocrystals: a tight-binding approach

We provide theoretical modeling of the optical spectrum of recently synthesized triangular CdS nanocrystals by means of atomistic tight-binding theory. Both zinc blende and wurtzite structures are considered. Optical properties predicted for triangular prisms are very different from the ones obtained for tetrahedral quantum dots when z-polarized light is employed. In particular, the ground transition is dim for triangular prisms, whereas it is bright and highly intense for tetrahedra. The high sensitivity of the fine optical properties on the quantum dot shape allows us to discriminate between truncated tetrahedra and triangular prisms and also to estimate the thickness of the nanocrystals.     

Optical Properties of Pure ZnSe Nanocrystals Synthesized by Laser Ablation in Organic Liquids

Synthesis of the zinc selenide (ZnSe) nanocrystals (NCs) by pulsed laser ablation approach is reported in two distinct liquid media (ethanol and acetone) by means of the 1st harmonic of high frequency Nd:YAG laser. Based on the X-ray diffraction (XRD) pattern, ZnSe NCs have both wurtzite and zinc blende structures with some overlapping peaks. Transmission electron microscopy (TEM) reveals that as-synthesized NCs are relatively monodispersed and spherical in shape. UV–Vis spectra indicate that the band gap of ZnSe NCs in acetone and ethanol is blue shifted comparing to the band gap of bulk ZnSe which is due to quantum confinement effect. According to the XRD results, TEM observations and UV–Vis spectroscopy, as-synthesized ZnSe NCs in ethanol are larger than the ones in acetone. Two kinds of band edge and deep level emissions are identified by means of the room temperature photoluminescence spectroscopy.     

柠檬酸盐稳定的水溶性CdSe量子点的合成及表征

以柠檬酸三钠为稳定剂在水溶液中合成了水溶性CdSe量子点,用X射线粉末衍射、透射电镜、紫外-可见吸收光谱和荧光发射光谱对CdSe量子点的结构、形貌及其荧光性质进行了表征.结果表明合成的CdSe量子点为立方闪锌矿结构,呈球形,分散性良好,平均尺寸约为2.6nm,具有窄且对称的荧光发射光谱,半峰宽为45nm.     

Synthesis of quantum-sized cubic ZnS nanorods by the oriented attachment mechanism

Quantum-sized ZnS nanocrystals with quasi-spherical and rod shapes were synthesized by the aging reaction mixtures containing diethylzinc, sulfur, and amine. Uniform-sized ZnS nanorods with the average dimension of 5 nm x 21 nm, along with a small fraction of 5 nm-sized quasi-spherical nanocrystals, were synthesized by adding diethylzinc to a solution containing sulfur and hexadecylamine at 125 degrees C, followed by aging at 300 degrees C. Subsequent secondary aging of the nanocrystals in oleylamine at 60 degrees C for 24 h produced nearly pure nanorods. Structural characterizations showed that these nanorods had a cubic zinc blende structure, whereas the fabrication of nanorods with this structure has been known to be difficult to achieve via colloidal chemical synthetic routes. High-resolution TEM images and reaction studies demonstrated that these nanorods are formed from the oriented attachment of quasi-spherical nanocrystals. Monodisperse 5 nm-sized quasi-spherical ZnS nanocrystals were separately synthesized by adding diethylzinc to sulfur dissolved in a mixture of hexadecylamine and 1-octadecene at 45 degrees C, followed by aging at 300 degrees C. When oleic acid was substituted for hexadecylamine and all other procedures were unchanged, we obtained 10 nm-sized quasi-spherical ZnS nanocrystals, but with broad particle size distribution. These two different-sized quasi-spherical ZnS nanocrystals showed different proportions of zinc blende and wurtzite crystal structures. The UV absorption spectra and photoluminescence excitation spectra of the 5 nm ZnS quasi-spherical nanocrystals and of the nanorods showed a blue-shift from the bulk band-gap, thus showing a quantum confinement effect. The photoluminescence spectra of the ZnS nanorods and quasi-spherical nanocrystals showed a well-defined excitonic emission feature and size- and shape-dependent quantum confinement effects.     

A low-temperature synthesis for organically soluble HgTe nanocrystals exhibiting near-infrared photoluminescence and quantum confinement

A new low-temperature, one-pot method is introduced for the preparation of organically passivated HgTe nanocrystals, without the use of highly toxic precursors. The nanocrystals show bright photoluminescence in the infrared telecommunication windows about 1300 and 1550 nm with quantum efficiencies between 55 and 60%. They have a zinc blende structure with a mean particle diameter of 3.4 nm, thus exhibiting quantum confinement effects. Particle growth is self-limited by temperature quenching, so a narrow size distribution is obtained. The measured size of the particles agrees with calculations using the pseudopotential method.     

Semiconductor Nanocrystal Engineering by Applying Thiol‐ and Solvent‐Coordinated Cation Exchange Kinetics

Thiol‐ and solvent‐coordinated cation exchange kinetics have been applied to engineer the composition and crystallinity of novel nanocrystals. The detailed thermodynamics and kinetics of the reactions were explored by NMR spectroscopy, time‐dependent photoluminescence (PL) characterizations and theoretical simulations. The fine structure of the colloidal semiconductor nanocrystals (CSNCs) was investigated by X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine structure (EXAFS). In this way, high‐quality p‐type Ag‐doped ZnS quantum dots (QDs) and Au@ZnS hetero‐nanocrystals with a cubic phase ZnS shell were synthesized successfully.The unprecedented dominant Ag⁺‐dopant‐induced fluorescence and p‐type conductivity in the zinc‐blende ZnS are reported.     

Shape controlled synthesis of palladium nanocrystals by combination of oleylamine and alkylammonium alkylcarbamate and their catalytic activity

The shape of Pd nanocrystals (NCs) can be controlled by combination of oleylamine (OAm) and alkylammonium alkylcarbamate (AAAC), and Pd spheres, tetrahedra and multipods have been synthesized. The multipods and tetrahedra are much more active than the spheres for hydrogenation reactions.     

Colloidal CsPbBr3 Perovskite Nanocrystals: Luminescence beyond Traditional Quantum Dots

Traditional CdSe‐based colloidal quantum dots (cQDs) have interesting photoluminescence (PL) properties. Herein we highlight the advantages in both ensemble and single‐nanocrystal PL of colloidal CsPbBr₃ nanocrystals (NCs) over the traditional cQDs. An ensemble of colloidal CsPbBr₃ NCs (11 nm) exhibits ca. 90 % PL quantum yield with narrow (FWHM=86 meV) spectral width. Interestingly, the spectral width of a single‐NC and an ensemble are almost identical, ruling out the problem of size‐distribution in PL broadening. Eliminating this problem leads to a negligible influence of self‐absorption and Förster resonance energy transfer, along with batch‐to‐batch reproducibility of NCs exhibiting PL peaks within ±1 nm. Also, PL peak positions do not alter with measurement temperature in the range of 25 to 100 °C. Importantly, CsPbBr₃ NCs exhibit suppressed PL blinking with ca. 90 % of the individual NCs remain mostly emissive (on‐time >85 %), without much influence of excitation power.     

Alloyed (ZnSe)(x)(CuInSe2)(1-x) and CuInSe(x)S(2-x) nanocrystals with a monophase zinc blende structure over the entire composition range

Metastable zinc blende CuInSe(2) nanocrystals were synthesized by a hot-injection approach. It was found that the lattice mismatches between zinc blende CuInSe(2) and ZnSe as well as CuInSe(2) and CuInS(2) are only 2.0% and 4.6%, respectively. Thus, alloyed (ZnSe)(x)(CuInSe(2))(1-x) and CuInSe(x)S(2-x) nanocrystals with a zinc blende structure have been successfully synthesized over the entire composition range, and the band gaps of alloys can be tuned in the range from 2.82 to 0.96 eV and 1.43 to 0.98 eV, respectively. These alloyed (ZnSe)(x)(CuInSe(2))(1-x) and CuInSe(x)S(2-x) nanocrystals with a broad tunable band gap have a high potential for photovoltaic and photocatalytic applications.     

Hierarchical CdSe-gold hybrid nanocrystals: synthesis and optical properties

The synthesis of hybrid nanostructures with controlled size, shape, composition and morphology has attracted increasing attention due to the fundamental and applicable interest. Here, we demonstrate the synthesis and optical properties of hierarchical CdSe-Au hybrid nanostructures with zinc blende (ZB) CdSe nanocrystals (NCs). For 3.5 nm ZB CdSe NCs, one Au cluster was deposited on each CdSe NC. Nevertheless, several Au clusters were selectively deposited on the apexes of 5 nm and 8 nm ZB CdSe NCs, resulting from the different reactivity of crystal facets. Furthermore, hierarchical CdSe-Au nanostructures with complex morphology were organized with the isolated CdSe-Au hybrid NCs by the coalescence of Au domains on the CdSe-Au hybrid NCs. UV-Vis spectra revealed a red tail upon the deposition of Au clusters. The chemical joint of Au on CdSe NCs was further confirmed by fluorescence quenching. The optical limiting performance of CdSe-Au hybrid NCs dispersed in toluene was investigated at 532 nm using a Nd:YAG laser with the pulse width of 8 ns.     

闪锌矿结构CdS纳米晶的制备

以3-巯基丙酸为硫源, 采用水热法制备了尺寸小于10 nm、具有强光致荧光的闪锌矿型立方CdS半导体纳米晶. 用EDS能谱、透射电镜(TEM)、高分辨透射电镜(HRTEM)和XRD对晶体的化学成分、大小及结构进行了表征, 并分析了影响纳米晶尺寸的因素, 研究了闪锌矿型硫化镉纳米晶的荧光激发与发射谱.     

Synthesis of green CdSe/chitosan quantum dots using a polymer-assisted γ-radiation route

Chitosan-coated CdSe quantum dots (CdSe/CS QDs) were successfully synthesized in aqueous system through a γ-radiation route at room temperature under ambient pressure. The diameter of the resulting QDs was about 4 nm with narrow size distribution. The synthesized QDs exhibited an absorption peak at 460 nm and an emission peak at 535 nm. These QDs were cubic zinc blende CdSe in core structure and coated with chitosan on surface, with fine solubility in water.     

Synthesis of Aqueous CdTe Nanocrystals with High Efficient Blue‐Green Emission of Exciton

As one of the most popular nanocrystals (NCs), aqueous CdTe NCs have very weak green emission under conventional synthesis conditions. In this work, we report the first example of blue‐emitting CdTe NCs directly synthesized in aqueous solution by slowing down the growth rate after nucleation. The key for the synthesis is the optimization of NC growth conditions, namely pH range of 7.5 to 8.5, TGA/Cd ratio of 3.6, Cd/Te ratio of 10, and Te concentration of 2×10^?5 mol/L, to get a slow growth rate after nucleation. The as‐prepared blue‐emitting CdTe NCs have small size (as small as 1.9 nm) and bright emission [with 4% photoluminescence quantum yield (PL QY) at 486 nm and 17% PLQY at 500 nm]. Transmission electron microscopy (TEM) images of the as‐prepared CdTe show monodispersed NCs which exhibit cubic zinc blend structure. Moreover, time‐resolved PL decay and X‐ray photoelectron spectroscopy (XPS) results show the as‐prepared NCs have better surface modification by ligand, which makes these luminescent small CdTe NCs have higher photoluminescence quantum yield, compared with NCs synthesized under conventional conditions.     

Synthesis of nanocrystalline CdS from cadmium(II) complex of S-benzyl dithiocarbazate as a precursor

The single X-ray crystal structure of the cadmium(II)–S-benzyl dithiocarbazate (SBDTC) complex, [Cd(SBDTC)Cl₂]₂, is reported. The compound has been found to be an effective single-source precursor for the preparation of CdS nanocrystals (NCs) via solvothermal method. CdS NCs including spheres and rods were prepared at a relatively low temperature by thermolysis of the precursor using chelating solvent like ethylene glycol (EG), ethylenediamine (EN), hydrazine hydrate (HH) or in a mixture of EG and EN. The influence of solvent, temperature and reaction time was investigated on the size and morphology of the NCs. Use of EG afforded spherical CdS NCs while EN uniquely yielded rod-shaped NCs, and mixture of spheres and rods are obtained from the mixture of EN and EG with a ratio 0.2 (v/v: EN/EG). UV–visible spectroscopy established pronounced quantum confinement with enhanced band gap and XRD analyses revealed hexagonal crystal phase for so obtained CdS NCs. The NCs were also characterized by transmission electron microscopy (TEM), photoluminescence spectroscopy (PL), energy-dispersive X-ray spectroscopy (EDS) and FTIR. The possible formation mechanism for the anisotropic growth of NCs was also discussed.     

Doping-induced emission of infrared light from Co2+-doped ZnSe quantum dots

ZnSe quantum dots doped with Co²⁺ have been prepared in aqueous solution by a one-pot method using thioglycolic acid as stabilizer. The quantum dots were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), UV?Cvisible spectrophotometry, and spectrofluorimetry. The results confirmed the quantum dots formed a single cubic phase with zinc blende structure. The average particle size of the quantum dots was approximately 5 nm. Co²⁺ ions were doped into ZnSe lattice sites by substitution. As a result, infrared (IR) emission of Co^{2+ 4}T₂(F) ?? ⁴A₂(F) at approximately 3.5 ??m was detected on excitation with 755 nm radiation.     

Synthesis and characterizations of ultra-small ZnS and Zn(1-x)Fe(x)S quantum dots in aqueous media and spectroscopic study of their interactions with bovine serum albumin

This work reports a new experimental methodology for the synthesis of ultra small zinc sulfide and iron doped zinc sulfide quantum dots in aqueous media. The nanoparticles were obtained using a simple procedure based on the precipitation of ZnS in aqueous solution in the presence of 2-mercaptoethanol as a capping agent, at room temperature. The effect of Fe(3+) ion concentration as dopant on the optical properties of ZnS was studied. The size of quantum dots was determined to be about 1nm, using scanning tunneling microscopy. The synthesized nanoparticles were characterized by X-ray diffraction, UV-Vis absorption and photoluminescence emission spectroscopies. The presence and amount of iron impurity in the structure of Zn((1-x))Fe(x)S nanocrystals were confirmed by atomic absorption spectrometry. A blue shift in band-gap of ZnS was observed upon increasing incorporation of Fe(3+) ion in the iron doped zinc sulfide quantum dots. The photoluminescence investigations showed that, in the case of iron doped ZnS nanoparticles, the emission band of pure ZnS nanoparticles at 427nm shifts to 442nm with appearance of a new sharp emission band around 532nm. The X-ray diffraction analysis indicated that the iron doped nanoparticles are crystalline, with cubic zinc blend structure, having particle diameters of 1.7±022nm. Finally, the interaction of the synthesized nanoparticles with bovine serum albumin was investigated at pH 7.2. The UV-Vis absorption and fluorescence spectroscopic methods were applied to compare the optical properties of pure and iron doped ZnS quantum dots upon interaction with BSA. It was proved that, in both cases, the fluorescence quenching of BSA by the quantum dots is mainly a result of the formation of QDs-BSA complex in solution. In the steady-state fluorescence studies, the interaction parameters including binding constants (K(a)), number of binding sites (n), quenching constants ( [Formula: see text] ), and bimolecular quenching rate constants (k(q)) were determined at three different temperatures and the results were then used to evaluate the corresponding thermodynamic parameters ΔH, ΔS and ΔG.     

Aqueous synthesis and characterization of glutathione-stabilized β-HgS nanocrystals with near-infrared photoluminescence

A simple, rapid and green aqueous approach to near-infrared (NIR)-emitting β-HgS nanocrystals (NCs) was demonstrated for the first time by using glutathione (GSH) as the stabilizer at room temperature. The resulting HgS NCs with zinc blend structure exhibited strong quantum size effect, and the emission peak could be tuned in a wide NIR region from ca. 775 to 1041 nm. As compared with early achievements, the emission intensity of GSH-stabilized HgS NCs enhanced, with the maximum quantum yield reaching ~2.8%. It was also found that the stability of the GSH-HgS NCs was improved noticeably, the PL peak red-shifting only 9 nm and 23 nm after stored at 4°C for 4 months and 25°C for 7 days, respectively. The better stability of the HgS NCs was elucidated by FT-IR due to the multiple coordination of GSH molecule to surface Hg of the NCs. The emission range of GSH-stabilized HgS NCs was located between the visible region (500-800 nm) and IR region (1000-1600 nm) of HgS NCs as reported previously, extending the emission region of HgS nanomaterial. Therefore, the continuous emission from visible to IR spectral ranges provided HgS material more potential applications.     

Self-assembly of linear arrays of semiconductor nanoparticles on carbon single-walled nanotubes

Ligand-stabilized nanocrystals (NCs) were strongly bound to the nanotube surfaces by simple van der Waals forces. Linear arrays of CdSe and InP quantum dots were formed by self-assembly using the grooves in bundles of carbon single-walled nanotubes (SWNTs) as a one-dimensional template. A simple geometrical model explains the ordering in terms of the anisotropic properties of the nanotube surface. CdSe quantum rods were also observed to self-organize onto SWNTs with their long axis parallel to the nanotube axis. This approach offers a route to the formation of ordered NC/SWNT architectures that avoids problems associated with surface derivatization.