Power flow through machine isolators to resonant and non-resonant beams

The parameters controlling power transmission from a vibrating machine to the seating structure, via spring-like vibration isolators, are investigated. The low frequency range is considered where the machine moves as a rigid body. It is shown that the finite seating structure can be modelled by an equivalent structure of infinite extent for frequency averaged power transmission calculations. Power transmission to a finite and an infinite beam via a mass and spring in series is measured experimentally and compared with theoretical predictions. The power transmission is measured by two proposed methods; the first involves the real component of the seating impedance, and the second the transfer impedance of the isolator.     

Measurement of dependence of backscatter coefficient from cylinders on frequency and diameter using focused transducers--with applications in trabecular bone

A theory for the elastic scattering response from a cylinder insonified by a plane wave was previously derived by Faran. In the present paper, the empirical relationship between Faran's theory and measurements of backscatter coefficient from cylindrical targets using focused transducers is investigated. Experimental measurements of dependence of backscatter coefficient on frequency and diameter for nylon wires are reported. It is found that, under certain conditions (including weak, incoherent scattering), backscatter coefficient measurements from collections of cylindrical scatterers may be meaningfully compared with Faran's model predictions. At low frequencies, the theory and experimental measurements exhibit similar dependences on frequency and diameter, provided that the scatterers are not too densely packed. At higher frequencies, the fine structure of Faran's predictions becomes difficult to reproduce experimentally with a focused transducer. Implications regarding applications to characterization of trabecular bone are discussed.     

Yield of singlet excitons in organic light-emitting devices: a double modulation photoluminescence-detected magnetic resonance study

Double-modulation (DM) photoluminescence (PL) detected magnetic resonance (PLDMR) measurements on poly(2-methoxy-5-(2(')-ethyl)-hexoxy-1,4-phenylene vinylene) are described. In these measurements, the laser excitation power is modulated at 1相似文献   

Phase-locking of a second-harmonic gyrotron oscillator using aquasi-optical circulator to separate injection and output signals

Phase-locking in a 34.5-GHz special complex cavity gyrotron oscillator operating at the second harmonic of the electron cyclotron frequency was studied. Injection of the locking power was made via a quasi-optical circulator connected to the gyrotron output. Locking bandwidth was measured by comparing the phase of the injection signal and output signal using a balanced mixer. Locking was observed with input power level as low as 40 dB below the gyrotron output power. The locking bandwidth is, however, narrower than in gyrotrons operating at the fundamental cyclotron frequency which may be attributed to the longer resonant cavity in the second harmonic gyrotron and the corresponding larger value of external quality factor. The measurements are roughly in agreement with predictions of Adler's phase-locking equation which is given for our system in terms of powers propagating in the output waveguide toward and away from the gyrotron cavity     

The sound absorption of an audience on unupholstered seating

The sound absorption of an audience on unupholstered seating as determined by acoustic scale model techniques is reported. The model auditor used was developed to simulate a seated person dressed in light to medium weight clothing. The variables examined are seating density, seating rake, perimeter per unit area of seating block, edge absorption and selective low frequency absorption. Tables are given for determining the total absorption of an audience based on the above variables.     

Resonance in planar linkage mechanisms mounted on vibrating foundations

An investigation into the dynamic response of the elastic connecting rod of a slider crank mechanism whose foundation is subjected to a vibration perpendicular to the plane of the linkage is presented. Equations of motion and the associated boundary conditions are derived by using a variational technique and an experimental investigation supports the predictions made by the theoretical analysis. These are that resonance conditions will exist when the sum of, or the difference between, the frequency of the foundation motion and the frequency of operation of a particular link, or a harmonic of this, are equal or nearly equal to the natural frequency of transverse vibration of that member.     

Characterization of a 10-MHz quadrant APD for measuring frequency oscillations and tip displacements of microcantilevers

The room-temperature response of a 10-MHz quadrant avalanche photodiode (APD) is investigated for detection of high frequency oscillations and tip displacements of fabricated microcantilevers. Currently, no quadrant detectors with a response bandwidth in the megahertz range are available, and oscillations on the order of a few microseconds cannot be resolved. A comparison is made between optical and opto-mechanical measurements to characterize this detector by investigating the frequency response and signal-to-noise (SNR) of pulsed laser signals up to 10?MHz and reflected laser signals from freely vibrating microcantilevers up to 1.64?MHz. The power level of the minimum detectable signal incident on the APD is found to be 28.2?±?5.0?nW for optical measurements and 1.0???W?±?5.0?nW for opto-mechanical measurements.     

The contribution of bubbles to high-frequency sea surface backscatter: a 24-h time series of field measurements

Measurements of acoustic sea surface backscattering, wind speed, and surface wave spectra were made continually over a 24-h period in an experiment conducted in 26 m of water near the Dry Tortugus collection of islands off south Florida in February 1995. The backscattering measurements were made at a frequency of 30 kHz and a sea surface grazing angle of 20 degrees; a time series of the decibel equivalent of this variable, called SS20, was studied in terms of its dependence on environmental variables. On occasion reliable estimates of scattering in the grazing range 15 degrees-27 degrees were also obtained during the 24 hours. The scattering data exhibited evidence, in terms of scattering level and grazing angle dependence, of scattering from near-surface bubbles rather than scattering from the rough air-sea interface. The scattering data were compared with a model for sigma(b), the apparent backscattering cross section per unit area due to bubble scattering, that is driven by a parameter, beta1, equal to the depth-integrated extinction cross section per unit volume. Using an empirical model for beta1 based on data from a 1977 experiment conducted in pelagic waters, model predictions agreed reasonably well with the 1995 measurements presented here. Additional model-data comparisons were made using four measurements from a 1992 experiment conducted in pelagic waters. Finally, the 24-h time series of acoustic scattering exhibited a hysteresis effect, wherein for a given wind speed, there was a tendency for the scattering level to be higher if prior winds had been falling. A better understanding of this effect is essential to reduce uncertainty in model predictions.     

Determination of equivalent sound speed profiles for ray tracing in near-ground sound propagation

The determination of appropriate sound speed profiles in the modeling of near-ground propagation using a ray tracing method is investigated using a ray tracing model which is capable of performing axisymmetric calculations of the sound field around an isolated source. Eigenrays are traced using an iterative procedure which integrates the trajectory equations for each ray launched from the source at a specific direction. The calculation of sound energy losses is made by introducing appropriate coefficients to the equations representing the effect of ground and atmospheric absorption and the interaction with the atmospheric turbulence. The model is validated against analytical and numerical predictions of other methodologies for simple cases, as well as against measurements for nonrefractive atmospheric environments. A systematic investigation for near-ground propagation in downward and upward refractive atmosphere is made using experimental data. Guidelines for the suitable simulation of the wind velocity profile are derived by correlating predictions with measurements.     

The measurement of acoustic properties of limited size panels by use of a parametric source

A method of measuring the acoustic properties of limited size panels immersed in water, with a truncated parametric array used as the acoustic source, is described. The insertion loss and reflection loss of thin metallic panels, typically 0·45 m square, were measured at normal incidence by using this technique. Results were obtained for a wide range of frequencies (10 to 100 kHz) and were found to be in good agreement with the theoretical predictions for plane waves. Measurements were also made of the insertion loss of aluminium, Perspex and G.R.P. panels for angles of incidence up to 50°. The broad bandwidth available from the parametric source permitted detailed measurements to be made over a wide frequency range using a single transmitting transducer. The small spot sizes obtainable with the parametric source also helped to reduce the significance of diffraction from edges of the panel under test.     

Pulse structure studies and absolute cavity length determination for a synchronously pumped picosecond dye laser

Second harmonic cross correlation functions of a pulse with its near neighbor have been studied in a synchronously pumped cw dye laser. Measurements were made both as a function of dye laser cavity length mismatch and the number of cavity round trips separating the correlated pulses. The pulse envelope is found to have a characteristic interpulse frequency determined by the pump laser, whereas the pulse substructure has a characteristic frequency determined by the dye laser cavity length. The cross correlation measurements allow experimental determination of the dye laser length corresponding to exact synchrony. In contrast to theoretical predictions the length of exact synchrony corresponds to optimum pulse shape and duration. Our results are discussed in terms of a simple model which leads to pulse duration estimates as much as twice those obtained by conventional analysis of autocorrelation traces.     

The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate: Finite Element,analytical and experimental studies

A study of the interaction of the S0 Lamb wave with a circular through-thickness hole in a plate is presented. The study is limited to the nondispersive frequency range of this wave, in which the distributions of stress and displacement are simple. This allows a Finite Element analysis to be undertaken using a two-dimensional membrane discretization. Predictions of the direct reflection of the S0 mode and the lateral scattering of the SH0 mode are made for a range of diameters of the hole. At the same time, an analytical solution based on modal superposition is developed, and this is also used to predict the reflection and scattering coefficients. Both sets of predictions are validated by experimental measurements. It is found that the trends of the reflection coefficients for different hole diameters, frequencies and distances from the hole satisfy a simple normalization. On a detailed scale, the functions exhibit undulations which are shown to result from the interference of the direct reflection with secondary reflections which arrive slightly later.     

Resonance frequencies of a spherical aluminum shell subject to static internal pressure

Measurements of the vibrational response of a spherical aluminum shell subject to changes in the interior pressure clearly demonstrate that resonance frequencies shift higher as the pressure is increased. The frequency shift appears to be smaller for longitudinal modes than for bending wave modes. The magnitude of frequency shift is comparable to analytical predictions made for thin cylindrical shells. Changes in the amplitudes of resonance peaks are also observed. A possible application of this result is a method for noninvasively monitoring pressure changes inside sealed containers, including intracranial pressure in humans.     

Nonlinear propagation in ultrasonic fields: measurements, modelling and harmonic imaging

In high amplitude ultrasonic fields, such as those used in medical ultrasound, nonlinear propagation can result in waveform distortion and the generation of harmonics of the initial frequency. In the nearfield of a transducer this process is complicated by diffraction effects associated with the source. The results of a programme to study the nonlinear propagation in the fields of circular, focused and rectangular transducers are described, and comparisons made with numerical predictions obtained using a finite difference solution to the Khokhlov-Zabolotskaya-Kuznetsov (or KZK) equation. These results are extended to consider nonlinear propagation in tissue-like media and the implications for ultrasonic measurements and ultrasonic heating are discussed. The narrower beamwidths and reduced side-lobe levels of the harmonic beams are illustrated and the use of harmonics to form diagnostic images with improved resolution is described.     

Statistical properties of single-mode and two-mode ring lasers

Recent theoretical and experimental investigations of the statistical properties of single-mode and two-mode ring lasers are described. A theory of the frequency dependence of laser light fluctuations in a single-mode laser and the photoelectric experiments testing the predictions of this theory are discussed. For the case of two-mode ring lasers, a theoretical discussion of the steady-state and transient properties, such as photon statistics, first-passage-time distributions, correlations and phase locking, is given. Theoretical predictions are compared with the results of photoelectric measurements carried out on two-mode gas and dye ring lasers. A summary and the principal conclusions of this article are presented, and suggestions for further investigations are made.     

Meridional ray backscattering enhancements for empty truncated tilted cylindrical shells: measurements,ray model,and effects of a mode threshold

Narrow-band backscattering experiments are used to characterize a meridional ray enhancement on a tilted, finite empty cylindrical shell having a blunt truncation. The meridional ray of the lowest order flexural leaky Lamb wave is examined, which has previously been shown to lead to large backscattering enhancements for excitation frequencies near and above the shell's coincidence frequency. The measurements are used to validate a convolution formulation ray theory describing the far-field backscattered amplitudes. Comparisons are also made with an approximate partial wave series solution for the finite cylindrical shell. The amplitude of the meridional ray enhancement is dependent on the nature of the reflection of the leaky wave from the shell truncation. While the peak measured amplitude agrees with predictions at low frequencies, experiments indicate the enhancement is degraded at high frequencies and exhibits an abrupt drop near the frequency of the mode threshold (cutoff) for the next-highest flexural mode. The nature of the leaky wave end reflection is examined using an approximate calculation of the energy reflection coefficient for leaky waves on a semi-infinite free plate. Results suggest the observed degradation is the result of mode conversion effects.     

The insertion loss of perforated porous plates in a duct without and with mean air flow

Measurements of the acoustic insertion loss of poroelastic plates with different perforation ratios, mounted transversely across a flow duct, without and with flow have been made at various locations in the duct. For the lower perforation ratio the insertion loss is found to be approximately 3 dB higher with air flow than without over the frequency range of the measurements. A parallel impedance model has been formulated to predict the effects of perforation on the insertion loss without flow. Measurements and predictions without flow have been found to be in reasonable agreement.     

The hall of the University of Warwick

The acoustic design of a 1300-seat multi-purpose concert hall is described and the uncertainties, practical difficulties and compromises inherent in orthodox practice are mentioned. Listeners' and performers' comments during the first six months of use are compared with the results of extensive objective measurements made in the completed hall. Major features of the design are the use of bleacher retractable seating, a terrace on three sides of the orchestra, exposed roof structure and ventilation trunking and novel techniques to provide good acoustic conditions for the performers.     

Broadband multimode baffled piezoelectric cylindrical shell transducers

Hollow piezoelectric cylindrical shell transducers may be made directional for underwater acoustic applications by the use of suitable acoustical baffles and the operational bandwidth may be extended by using multiple resonant modes. A theoretical and experimental investigation was performed for circumferentially baffled piezoelectric cylindrical shell transducers operating in the zero and one modes of extensional vibration. The frequency responses and directivity patterns were analyzed under various conditions of energizing separate halves of electrodes. It was found that the broadest frequency response with nearly constant beamwidth can be obtained when the two halves of the piezoelectric ring are electromechanically excited 90 deg out-of-phase. The experimental results obtained with a proof-of-concept transducer were in good agreement with the theoretical predictions.     

Direct EPR irradiation of a sample using a quartz oscillator operating at 250 MHz for EPR measurements

Direct irradiation of a sample using a quartz oscillator operating at 250 MHz was performed for EPR measurements. Because a quartz oscillator is a frequency fixed oscillator, the operating frequency of an EPR resonator (loop-gap type) was tuned to that of the quartz oscillator by using a single-turn coil with a varactor diode attached (frequency shift coil). Because the frequency shift coil was mobile, the distance between the EPR resonator and the coil could be changed. Coarse control of the resonant frequency was achieved by changing this distance mechanically, while fine frequency control was implemented by changing the capacitance of the varactor electrically. In this condition, EPR measurements of a phantom (comprised of agar with a nitroxide radical and physiological saline solution) were made. To compare the presented method with a conventional method, the EPR measurements were also done by using a synthesizer at the same EPR frequency. In the conventional method, the noise level increased at high irradiation power. Because such an increase in the noise was not observed in the presented method, high sensitivity was obtained at high irradiation power.