Combustion synthesis and characterization of porous perovskite catalysts

Porous perovskite-type complex oxides LaCoO₃ and La_0·95Sr_0·05Ni_0·05Co_0·95O₃ were produced by combustion method. The properties of these porous materials such as crystal structures, particle sizes, surface patterns, pore size, surface area and pore volume were characterized by X-ray diffraction( XRD), scanning electron microscopy(SEM) and BET measurements. The results indicated that all porous materials are of the perovskite-type complex oxides. Doping Sr²⁺ ions on site A and doping Ni²⁺ ions on site B entered the crystal lattices of LaCoO₃ in the place of La³⁺ and Co³⁺, respectively, and the maximum peak of XRD patterns of doping sample was weaken and broaden. Morphological microscopy demonstrated agglomerates involved mostly thin smooth flakes and layers perforated by a large number of pores and its lamella decreased with the introduction of Sr²⁺ and Ni²⁺. Hysteresis loop in the N₂ adsorption-desorption isotherm of samples indicated its porous structures and the doping effect on its pore size, surface area and pore volume were improved. The porous catalysts have been tested for methane catalytic combustion and the results showed that these catalysts possessed high catalytic activity.     

Solvothermal synthesis and characterization of Ln (Eu3+, Tb3+) doped hydroxyapatite

Luminescent Ln (Eu3+, Tb3+) doped hydroxyapatite (Eu:HAp, Tb:HAp) phosphors were successfully fabricated via the cetyltrimethylammonium bromide (CTAB)/n-octane/n-butanol/water microemulsion-mediated solvothermal process. The structure, morphology, and optical properties were systematically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), and photoluminescence (PL) spectra as well as the kinetic decays, respectively. The XRD results reveal that the obtained Eu:HAp and Tb:HAp show the characteristic peaks of hydroxyapatite in a hexagonal lattice structure. It is observed that the as-prepared luminescent samples exhibit rod-like morphology with well dispersed and non-aggregated size distribution. Upon excitation by UV radiation, the phosphors demonstrate the characteristic 5D 0-7F 1-4 emission lines of Eu3+ and the characteristic 5D4-7F 3-6 emission lines of Tb3+. Moreover, the photoluminescence intensities (PL) of Eu3+ and Tb3+ can be tuned by altering the solvothermal temperature and the doping concentration of Eu3+ and Tb3+.     

Optical properties of Dy3+ doped in oxyfluoroborate glass

Optical absorption, fluorescence and photoacoustic spectra of Dy3+ doped in oxyfluoroborate glass has been studied. Lifetime of 4F(9/2) level has been measured for different concentration of Dy3+. Effect of concentration quenching on the lifetime and the fluorescence yield has been observed and the mechanism of energy transfer discussed. The energy transfer from Pr3+ to Dy3+ has been observed and explained in a codoped glass containing Pr3+ + Dy3+.     

Spectroscopy and upconversion of Dy3+ doped in sodium zinc phosphate glass

Optical absorption and fluorescence spectra of Dy3+ doped in sodium zinc phosphate glasses have been reported. Judd-Ofelt theory has been applied to analyze the spectra and determine the optical parameters such as transition probabilities, radiative lifetime, stimulated emission cross-section, etc. The fluorescence intensity of Dy3+ corresponding to 4F9/2-->6H13/2 transition increases with increasing concentration of Dy3+ but at higher concentrations, concentration quenching is observed. The radiative lifetime of the 4F9/2 level at 1 mol% concentration of Dy3+ in this host is found to be 541 micros. Emission corresponding to 4F9/2-->6H13/2 transition (570 nm) is observed on excitation with NIR radiation due to upconversion. An attempt is made to explain this observation.     

CeF3:Tb3+掺杂磷钼酸纳米球的合成、表征及荧光性质

多酸基纳米材料因独特的形貌、组成及广泛的应用价值而受到广泛的关注.但稀土氟化物作为一种荧光性能突出的材料与多酸形成纳米复合物还鲜有报道.本文使用化学沉淀法,在温和的水溶液条件下,成功合成出CeF_3∶Tb~(3+)掺杂磷钼酸纳米球.此外,对标题化合物进行了荧光性质的研究,在250 nm的激发波长下,该化合物表现出Tb~(3+)离子和多酸阴离子的多重发射光谱.     

BaFeO3和BaCeO3钙钛矿型氧化物的储氮性能

 采用改进的溶胶－凝胶法制备了Ba－Fe－O（Ba／Fe原子比为0．5），Ba－Ce－O（Ba／Ce原子比为1）和Ba－Sn－O（Ba／Sn原子比为1）氧化物，并考察了其储氮性能．结果表明，750℃焙烧的Ba－Fe－O样品，在400℃下的NOx储存容量（NSC）最大，其次为900℃焙烧的Ba－Ce－O样品；相同温度焙烧的样品，在400℃下的NSC均大于200℃下的NSC．XRD测试结果表明，750℃焙烧的Ba－Fe－O样品的缺陷钙钛矿BaFeO3－δ可能是储存NOx的主要活性相，而Ba－Ce－O和Ba－Sn－O样品储存NOx的活性相分别为钙钛矿型BaCeO3和BaSnO3．BET测定结果表明，样品的比表面积均较小．用FT－IR分析了Ba－Fe－O样品上储存的NOx物种．讨论了NSC大小与吸收温度、NOx吸收物种及样品物相之间的关系．     

Reddish-orange,neutral and warm white emissions in Eu3+, Dy3+ and Dy3+/Eu3+ doped CdO-GeO2-TeO2 glasses

Eu³⁺, Dy³⁺ and Dy³⁺/Eu³⁺ doped CdO-GeO₂-TeO₂ glasses were prepared using the melt-quenching process and analyzed by X-diffraction, Raman spectroscopy, excitation and emission spectra, and emission decay time profiles. The lack of X ray diffraction peaks revealed that all samples are amorphous. Vibrational modes associated with TeOTe and GeOGe related bonds and molecular oxygen were detected by Raman spectroscopy. The luminescence characteristics were studied upon excitations that correspond with the emission of InGaN (370–420 nm) based LEDs. The Eu³⁺ singly doped glass displayed reddish-orange global emission, with x = 0.601 and y = 0.349 CIE1931 chromaticity coordinates, upon 393 nm excitation. Neutral emission with x = 0.373 and y = 0.412 CIE1931 chromaticity coordinates and correlated color temperature (CCT) of 4400 K, was achieved in the Dy³⁺ singly doped glass excited at 388 nm. The Dy³⁺/Eu³⁺ co-doped glass exhibited warm, neutral and soft warm white emissions with CCT values of 3435, 4153 and 2740 K, under excitations at 382, 388 and 393 nm, respectively, depending mainly on the Dy³⁺ and Eu³⁺ relative excitation. The Dy³⁺ excitation bands observed in the Dy³⁺/Eu³⁺ glass by monitoring the 611 nm Eu³⁺ emission, suggest that Dy³⁺ → Eu³⁺ energy transfer takes place, despite the fact that the Dy³⁺ emission decays in the Dy³⁺ and Dy³⁺/Eu³⁺ doped glass, remain without changes. The shortening of Eu³⁺ decay in presence of Dy³⁺ was attributed to an Eu³⁺ → Dy³⁺ non-radiative energy transfer process, which according with the Inokuti-Hirayama model might be dominated through an electric quadrupole-quadrupole interaction, with efficiency and probability of 5.5% and 51.6 s⁻¹, respectively.     

Microstructural,magnetic and crystal field investigations of nanocrystalline Dy3+ doped zinc oxide

Dy³⁺ doped zinc oxide was prepared by co-precipitation method. The as-prepared samples were annealed at different temperatures to obtain the samples with different particle sizes. The crystallographic phases of all the samples were confirmed by X-ray diffraction (XRD) patterns. Rietveld analysis of the XRD pattern of the sample annealed at 80 °C showed that most of the Dy³⁺ ions were substituted in the Zn²⁺ site of the hexagonal ZnO lattice. But in case of samples annealed at higher temperatures, a fraction of Dy³⁺ ions comes out from the ZnO lattice and this fraction increases with the increase of annealing temperature. The sizes of nanoparticles and the lattice strains of all the samples were obtained from the Hall–Williamson plot. High resolution transmission electron microscopy showed that ZnO nanoparticles are more or less spherical. Magnetic susceptibilities (χ) of some selected samples measured in the temperature range of 300–14 K indicate that the samples are paramagnetic. Values of χ were successfully fitted by Curie–Weiss law. A good theoretical simulation of χ of the sample annealed at 80 °C has been achieved using the one-electron crystal field interaction of the Dy³⁺ ions with its diamagnetic neighbors in the hexagonal single crystal.     

Optical properties of Dy3+ doped calibo glass on addition of lead oxide

The effects of PbO on optical properties of dysprosium doped calibo glass have been studied. The content of PbO in the glass has been varied from 0 to 60 mol%. The absorption and fluorescence spectra are analyzed in terms of the Judd-Ofelt theory. It is observed that the fluorescence yield is maximum for the glass containing 40 mol% PbO. The I-R absorption spectra of these glasses have also been recorded and interpreted in terms of changes in the structure of the glasses.     

Luminescence properties of Dy3+ or/and Sm3+ doped LiLa(WO4)2 phosphors and energy transfer from Dy3+ to Sm3+

The Dy³⁺ or/and Sm³⁺ doped LiLa(WO₄)₂ phosphors are synthesized by a facile solid state reaction method. The phase and luminescence properties of the phosphors are investigated. The powder X-ray diffraction (XRD) results show that the phosphor has a tetragonal phase crystal structure. The quenching concentration of single doped Dy³⁺ and Sm³⁺ in the LiLa(WO₄)₂ are determined to be 6% and 3%, respectively. Under the excitation of 404 nm, warm white light is obtained in the co-doped phosphors. With the concentration of Sm³⁺ increasing, the correlated color temperature (CCT) gradually decreases from 3090 to 2453 K. Two kinds of energy transfer may exist at the same time. The overlap between the emission spectrum of Dy³⁺ and the excitation spectrum of Sm³⁺ reveals that the energy of Dy³⁺ can transfer to Sm³⁺ via radiation. Another way of energy transfer, that is non-radiative energy transfer, is attributed to the excited state of Dy³⁺ (⁴F_9/2) slightly higher than that of Sm³⁺ (⁴I_19/2). The calculation results show that non-radiative energy transfer process from Dy³⁺ to Sm³⁺ ions is predominated by quadrupole–quadrupole interaction.     

Optical characterization of Sm3+ and Dy3+:ZnO-PbO-B2O3 glasses

Here, we present the results of the analysis of Sm(3+) or Dy(3+) (0.5 mol%) ions doped heavy metal oxide (HMO)-based zinc lead borate (ZLB) glasses. Optical measurements such as absorption, emission spectra, lifetimes, XRD, DSC profiles have been carried out. The emission spectrum of Sm(3+):ZLB has shown the emission transitions of (4)G(5/2)-->(6)H(5/2) (563 nm), (4)G(5/2)-->(6)H(7/2) (598 nm), (4)G(5/2)-->(6)H(9/2) (646 nm), (4)G(5/2)-->(6)H(11/2) (708 nm) with lambda(exc): 401 nm ((6)H(5/2)-->(4)F(7/2)). In the case of the Dy(3+):ZLB glass, emission transitions of (4)F(9/2)-->(6)H(15/2) (485 nm), (4)F(9/2)-->(6)H(13/2) (575 nm) and (4)F(9/2)-->(6)H(11/2) (664 nm) with lambda(exi): 447 nm ((6)H(15/2)-->(4)I(15/2)) have been identified. Energy level schemes relating to the emission mechanisms involved in Sm(3+) and Dy(3+) glasses have been given.     

Hydrothermal synthesis of perovskite nanotubes

A low-temperature hydrothermal reaction has been utilized to generate crystalline barium titanate and strontium titanate nanotubes, which have been characterized by means of X-ray diffraction and transmission electron microscopy, coupled with energy dispersive X-ray analysis.     

BaCeO3 钙钛矿型氧化物的储氮和抗硫性能研究

采用改进的溶胶-凝胶法制备了钙钛矿结构的BaCeO3样品,在此基础上再用浸渍法制备了Pt/BaCeO3、 Rh/BaCeO3、 Pt-Rh/BaCeO3样品,并用机械混合γ-Al2O3,再浸渍贵金属的方法制备了Pt/BaCeO3/γ-Al2O3、 Rh/BaCeO3/γ-Al2O3、 Pt-Rh/BaCeO3/γ-Al2O3样品.储氮量(NSC)结果表明:对未加γ-Al2O3的BaCeO3来说,贵金属的加入反而使NSC减小.加入贵金属催化剂的储氮量(NSC)大小为: Pt的最大, Rh的次之, Pt-Rh的最小.γ-Al2O3的加入对BaCeO3吸收NO和O2没有影响.而对于BaCeO3/γ-Al2O3样品,贵金属的加入使NSC值提高了3倍以上.讨论了贵金属加入到BaCeO3/γ-Al2O3样品中显著提高样品储氮能力的原因.结合XRD结果表明,钙钛矿 BaCeO3相是Ba-Ce-O样品主要的NOx储存活性中心.NSC结果还表明, BaCeO3和Pt/BaCeO3催化剂在SO2为≤0.006%时具有较好的抗硫性能.而Pt/BaCeO3/γ-Al2O3催化剂不但具有较好的储氮能力而且具有更好的抗硫性能.     

High-pressure synthesis and neutron diffraction investigation of the crystallographic and magnetic structure of TeNiO3 perovskite

TeNiO(3) has been prepared under moderate pressure conditions (3.5 GPa), starting from a reactive TeO(2) and Ni(OH)(2) mixture contained in a sealed platinum capsule under the reaction conditions (850 °C for 2 h). The sample has been studied by neutron powder diffraction (NPD) data and magnetization measurements. TeNiO(3) crystallizes in an orthorhombically-distorted perovskite structure (space group Pnma) with the unit cell parameters a = 5.9588(1) ?, b = 7.5028(1) ? and c = 5.2143(1) ?. The NiO(6) octahedral network is extremely tilted, shaping a trigonal-pyramidal environment for the Te, where it is effectively coordinated to three oxygen atoms at Te-O distances of 1.92 ?. Below T(N) ≈ 130 K, it experiences an antiferromagnetic ordering, as demonstrated by susceptibility and NPD measurements. Above the Néel temperature, a paramagnetic moment of 3.24(1) μ(B)/f.u. and θ(Weiss) = -199(1) K are obtained from the reciprocal susceptibility. Below T(N), the magnetic reflections observed in the neutron patterns can be indexed with a propagation vector k = 0. The magnetic structure corresponds to the magnetic mode G(y)F(z). The magnetic moments are oriented along the y-direction, with a canting along the z-axis. This ferromagnetic component explains the weak ferromagnetism observed in the magnetization isotherms; the infrequent shape of the magnetization cycles suggests a metamagnetic transition below 0.2 T. At T = 2.5 K, the ordered magnetic moment for the Ni(2+) ions is 1.88(5) μ(B) for the G(y) mode and 0.9(2) μ(B) for the F(x) mode.     

Preparation and characterization of Nd3+ doped sodium leadbismuthate glass

Nd(3+) doped unconventional sodium leadbismuthate glass is prepared through the melt quenching method. The amorphous nature of the glass is confirmed through the X-ray diffraction study. The differential thermal study was performed to identify the glass transition and approximate glass thermal stability measurements. To identify the local structure of the glass, Fourier transform infrared spectral analysis was also carried out. By performing the Judd-Ofelt theory, the theoretical and experimental oscillator strengths were calculated.     

The effect of calcium substitution on the afterglow of Eu2+/Dy3+ doped Sr4Al14O25

The effect of calcium substitution on the afterglow of tetrastrontium aluminate phosphors (Sr₄Al₁₄O₂₅:Eu²⁺, Dy³⁺) was investigated. A series of (Sr₁-_xCa_x)O⊎nAl₂O₃:Eu²⁺(1%), Dy³⁺(0.5%), with variation of calcium content (x = 0 − 1), were synthesized by a high temperature solid state reaction in a reducing atmosphere. The photoluminescence, persistent luminescence (afterglow), and lumen equivalents of these materials were studied and compared. It turned out that the afterglow properties of the phosphors were strongly dependent on the Sr/Ca ratio. As the Ca content increased, a phase transition and blue shift in emission spectra were observed.      

Large-scale synthesis of single-crystalline perovskite nanostructures

Single-crystalline perovskite nanostructures with reproducible shape have been prepared using a simple, readily scaleable solid-state reaction in the presence of NaCl and a nonionic surfactant. Pristine BaTiO3 nanowires have diameters ranging from 50 to 80 nm with an aspect ratio larger than 25. Single-crystalline SrTiO3 nanocubes with a mean edge length of 80 nm have been produced using a similar procedure.     

Preparation and characterization of KTa0.9Fe0.1O3– δ perovskite electrodes

The effect of the partial substitution of tantalum by iron on the structural and electrical properties of the KTaO₃ perovskite-type oxide powders has been studied. The powders were prepared by the standard ceramic method, and the respective structural characterization performed by X-ray powder diffraction. From the synthesized oxide samples, iron-coated electrodes were fabricated and tested as the anode for the oxygen evolution reaction in alkaline medium. An estimation of the electrode's capacity has been calculated from the charging currents and the corresponding roughness factor evaluated. The electrocatalytic activity/stability of the oxide electrodes in alkaline solutions has been analysed through the kinetic parameters. Electronic Publication