Rhodium(III)‐Catalyzed Redox‐Neutral Coupling of α‐Trifluoromethylacrylic Acid with Benzamides through Directed C−H Bond Cleavage

A rhodium(III)‐catalyzed redox‐neutral coupling of α‐trifluoromethylacrylic acid with bezamides proceeds smoothly accompanied by amide‐directed C?H bond cleavage to produce β‐[2‐(aminocarbonyl)phenyl]‐α‐trifluoromethylpropanoic acid derivatives. One of the products can be transformed to a trifluoromethyl substituted heterocyclic compound. In addition, the redox‐neutral coupling of α‐trifluoromethylacrylic acid with related aromatic substrates possessing a nitrogen‐containing directing group can also be conducted under similar conditions.     

Synthesis of 3‐phenyl‐5‐(trifluoromethyl)isoxazole and 5‐phenyl‐3‐(trifluoromethyl)isoxazole

Reaction of 4,4,4‐trifluoro‐1‐phenyl‐1,3‐butanedione with hydroxylamine led to the formation of 5‐hydroxy‐3‐phenyl‐5‐(trifluoromethyl)‐4,5‐dihydroisoxazole which was dehydrated to 3‐phenyl‐5‐(trifluoro‐methyl)isoxazole. This isomer can also be synthesized by reaction of 4‐chloro‐4‐phenyl‐1,1,1‐trifluoro‐3‐buten‐2‐one with sodium azide. The regioisomer, 5‐phenyl‐3‐(trifluoromethyl)isoxazole was synthesized by reaction of 1,1,1‐trifluoro‐4‐phenylbut‐3‐yn‐2‐one with hydroxylamine and by the reaction of 3‐chloro‐1‐phenyl‐4,4,4‐trifluorobut‐2‐en‐1‐one with sodium azide. Both isomers were characterized by mass and NMR spectroscopy.     

Conformational studies on heteroleptic trifluoromethyl‐substituted phenylboranes

Organoboranes carrying electron‐withdrawing substituents are commonly used as Lewis acidic catalysts or cocatalysts in a variety of organic processes. These Lewis acids also became popular through their application in `frustrated Lewis pairs', i.e. combinations of Lewis acids and bases that are unable to fully neutralize each other due to steric or electronic effects. We have determined the crystal and molecular structures of four heteroleptic arylboranes carrying 2‐(trifluoromethyl)phenyl, 2,6‐bis(trifluoromethyl)phenyl, 3,5‐bis(trifluoromethyl)phenyl or mesityl substituents. [3,5‐Bis(trifluoromethyl)phenyl]bis[2‐(trifluoromethyl)phenyl]borane, C₂₂H₁₁BF₁₂, (I), crystallizes with two molecules in the asymmetric unit which show very similar geometric parameters. In one of the two molecules, both trifluoromethyl groups of the 3,5‐bis(trifluoromethyl)phenyl substituent are disordered over two positions. In [3,5‐bis(trifluoromethyl)phenyl]bis[2,6‐bis(trifluoromethyl)phenyl]borane, C₂₄H₉BF₁₈, (II), only one of the two meta‐trifluoromethyl groups is disordered. In [2,6‐bis(trifluoromethyl)phenyl]bis[3,5‐bis(trifluoromethyl)phenyl]borane, C₂₄H₉BF₁₈, (III), both meta‐trifluoromethyl groups of only one 3,5‐bis(trifluoromethyl)phenyl ring are disordered. [3,5‐Bis(trifluoromethyl)phenyl]dimesitylborane, C₂₆H₂₅BF₆, (IV), carries only one meta‐trifluoromethyl‐substituted phenyl ring, with one of the two trifluoromethyl groups disordered over two positions. In addition to compounds (I)–(IV), the structure of bis[2,6‐bis(trifluoromethyl)phenyl]fluoroborane, C₁₆H₆BF₁₃, (V), is presented. None of the ortho‐trifluoromethyl groups is disordered in any of the five compounds. In all the structures, the boron centre is in a trigonal planar coordination. Nevertheless, the bond angles around this atom vary according to the bulkiness and mutual repulsion of the substituents of the phenyl rings. Also, the ortho‐trifluoromethyl‐substituted phenyl rings usually show longer B—C bonds and tend to be tilted out of the BC₃ plane by a higher degree than the phenyl rings carrying ortho H atoms. A comparison with related structures corroborates the conclusions regarding the geometric parameters of the boron centre drawn from the five structures in this paper. On the other hand, CF₃ groups in meta positions do not seem to have a marked effect on the geometry involving the boron centre. Furthermore, it has been observed for the structures reported here and those reported previously that for CF₃ groups in ortho positions of the aromatic ring, disorder of the F atoms is less probable than for CF₃ groups in meta or para positions of the ring.     

Titelbild: Double C?F Bond Activation through β‐Fluorine Elimination: Nickel‐Mediated [3+2] Cycloaddition of 2‐Trifluoromethyl‐1‐alkenes with Alkynes (Angew. Chem. 29/2014)

The nickel‐mediated [3+2] cycloaddition of 2‐trifluoromethyl‐1‐alkenes with alkynes afforded fluorine‐containing multi‐substituted cyclopentadienes in a regioselective manner. This reaction involves the consecutive two C F bond cleavage of a trifluoromethyl or a pentafluoroethyl group through β‐fluorine elimination.     

Photochemistry of 4‐ and 5‐ phenyl substituted isoxazoles

5‐Phenylisoxazole ( 4 ) and 4‐phenylisoxazole ( 22 ) underwent phototransposition to 5‐phenyloxazole ( 5 ) and 4‐phenyloxazole ( 24 ) respectively. Labeling with deuterium or methyl confirmed that these phototranspositions occurred via the P₄ pathway which involves only interchange of the N2 and C3 ring position. Thus, 4‐deuterio‐5‐phenylisoxazole ( 4‐4d ), 4‐methyl‐5‐phenylisoxazole ( 10 ), and 5‐methyl‐4‐phenylisoxazole ( 23 ) phototransposed to 4‐deuterio‐5‐phenyloxazole ( 5‐4d ), 4‐methyl‐5‐phenyloxazole ( 11 ), and 5‐methyl‐4‐phenyloxazole ( 25 ) respectively. In addition to phototransposition, isoxazoles 4, 10 , and 23 also underwent photo‐ring cleavage to yield benzoylacetonitrile (9), α‐benzoylpropionitrile ( 15 ), and aceto‐α‐phenylacetonitrile ( 26 ) respectively. Irradiation of 5‐phenyl‐3‐(trifluoromethyl)isoxazole ( 16 ) in acetonitrile led to 5‐phenyl‐2‐(trifluoromethyl)oxazole ( 17 ), the P₄ phototransposition product. Irradiation of 16 in methanol led to a substantial decrease in the yield of 17 and to the formation of a mixture of (E) and (Z)‐2‐methoxy‐2‐(trifluoromethyl)‐3‐benzoylaziridines 18a and 18b .     

New liquid‐crystal alignment agents based on fluorinated polyimides with trifluoromethyl‐substituted benzene or diphenylether in the side chain

Fluorinated copolyimides derived from 4,4′‐oxydiphthalic anhydride (ODPA) with 4,4′‐oxydianline (ODA) and trifluoromethyl‐containing aromatic diamines have been synthesized and characterized. The trifluoromethyl‐containing diamines include 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, 3,5‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] benzamide, 3,5‐diamino‐1‐[(3′‐trifluoromethyl) phenyl] benzamide, 1,4‐bis(4′‐aminophenoxy)‐2‐(3′‐trifluoromethylphenyl) benzene, 3,5‐diaminobenzenetrifluoride, 4,4′‐diamino‐4″‐(p‐trifluoromethyl phenoxy) triphenylamine, and 4‐[(4′‐trifluoromethylphenoxy) phenyl]‐2,6‐bis(4″‐aminophenyl)pyridine. Strong and flexible copolyimide films, produced by casting the polyamic acid solution followed by thermal imidization, exhibited great thermal stability and high mechanical properties. The polyimides had an ultraviolet–visible absorption cutoff at 330–340 nm and pretilt angles as high as 20° for nematic liquid crystals, making them great potential candidates for advanced liquid‐crystal display applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1583–1593, 2002     

Reactivity of 4‐phenylthiazoles in ruthenium catalyzed direct arylations

The reactivity of the phenyl substituent of 4‐phenylthiazoles in Ru‐catalyzed direct arylation was studied. 4‐Phenylthiazole was found to be unreactive; whereas, the introduction of an aryl unit at C5‐position of 4‐phenylthiazole enhances its reactivity, allowing the selective mono‐arylation of the phenyl unit of 4‐phenylthiazoles in moderate to high yields using 5 mol% of [Ru(p‐cymene)Cl₂]₂ catalyst precursor associated to KOPiv as base. These results reveal that the conformation and electronic properties of 4‐phenylthiazoles are crucial to allow the formation of suitable intermediates in the course of the catalytic cycle. The reaction tolerated both electron‐rich and electron‐poor aryl bromides allowing the straightforward tuning of the electronic properties of the arylated 2‐methyl‐4‐phenyl‐5‐arylthiazoles.     

Synthesis and characterization of novel polyimide from bis‐(3‐aminophenyl)‐4‐(trifluoromethyl)phenyl phosphine oxide

A novel diamine, bis‐(3‐aminophenyl)‐4‐(trifluoromethyl)phenyl phosphine oxide (mDA3FPPO), containing phosphine oxide and fluorine moieties was prepared via the Grignard reaction from an intermediate, 4‐(trifluoromethyl)phenyl diphenyl phosphine oxide, that was synthesized from diphenylphosphinic chloride and 4‐(trifluoromethyl)bromobenzene, followed by nitration and reduction. The monomer was characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR, ¹⁹F NMR spectroscopies; elemental analysis; melting point measurements; and titration and was used to prepare polyimides with a number of dianhydrides such as pyromellitic dianhydride (PMDA), 5,5′‐[2,2,2‐trifluoro‐1‐(trifluoromethyl)ethyliden]‐bis‐1,3‐isobenzofuranedione (6FDA), 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐oxydiphthalic dianhydride (ODPA). Polyimides were synthesized via a conventional two‐step route; preparation of polyamic acids, followed by solution imidization, and the molecular weight were controlled to 20,000 g/mol. Resulting polyimides were characterized by FTIR, NMR, DSC, and intrinsic viscosity measurements. Refractive‐index, dielectric constant, and adhesive properties were also determined. The properties of polyimides were compared with those of polyimides prepared from 1,1‐bis‐(4‐aminophenyl)‐1‐phenyl‐2,2,2‐trifluoroethane (3FDAm) and bis‐(3‐aminophenyl) phenyl phosphine oxide (mDAPPO). The polyimides prepared from mDA3FPPO provided high glass‐transition temperatures (248–311 °C), good thermal stability, excellent solubility, low birefringence (0.0030–0.0036), low dielectric constants (2.9–3.1), and excellent adhesive properties with Cu foils (107 g/mm). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3335–3347, 2001     

meso‐3,5‐Bis(trifluoromethyl)phenyl‐Substituted Expanded Porphyrins: Synthesis,Characterization, and Optical,Electrochemical, and Photophysical Properties

Trifluoroacetic acid‐catalyzed condensation of pyrrole with electron‐deficient and sterically hindered 3,5‐bis(trifluoromethyl)benzaldehyde results in the unexpected production of a series of meso‐3,5‐bis(trifluoromethyl)phenyl‐substituted expanded porphyrins including [22]sapphyrin 2 , N‐fused [22]pentaphyrin 3 , [26]hexaphyrin 4 , and intact [32]heptaphyrin 5 together with the conventional 5,10,15,20‐tetrakis(3,5‐bis(trifluoromethyl)phenyl)porphyrin 1 . These expanded porphyrins are characterized by mass spectrometry, ¹H NMR spectroscopy, UV/Vis/NIR absorption spectroscopy, and fluorescence spectroscopy. The optical and electrochemical measurements reveal a decrease in the HOMO–LUMO gap with increasing size of the conjugated macrocycles, and in accordance with the trend, the deactivation of the excited singlet state to the ground state is enhanced.     

MOF‐promoted Three‐component Synthesis of Functionalized Pyrano[3,2‐c]chromen under Mild Conditions

A convenient and efficient route for synthesis of various derivatives of 3‐benzoyl‐4‐phenyl‐2‐(trifluoromethyl)pyrano[3,2‐c]chromen‐5(4H)‐one has been used via tandem Knoevenagel condensation–Michael addition and intramolecular cyclization sequence. These products have been synthesized in the presence of catalytic amount of metal–organic framework (MOF) and potassium carbonate as one‐pot, three‐component reaction. MOF catalyst has been separated easily with external magnet, and high purity of products has been obtained after washing with ethanol. This protocol has advantages of simplicity, mild condition, and high yield. More importantly, MOF has been easily recycled for three times.     

Highly Enantioselective Cross‐Aldol Reactions of Acetaldehyde Mediated by a Dual Catalytic System Operating under Site Isolation

Polystyrene‐supported (PS) diarylprolinol catalysts 1 a (Ar=phenyl) and 1 b (Ar=3,5‐bis(trifluoromethyl)phenyl) have been developed. Operating under site‐isolation conditions, PS‐ 1 a / 1 b worked compatibly with PS‐bound sulfonic acid catalyst 2 to promote deoligomerization of paraldehyde and subsequent cross‐aldol reactions of the resulting acetaldehyde in one pot, affording aldol products in high yields with excellent enantioselectivities. The effect of water on the performance of the catalytic system has been studied and its optimal amount (0.5 equiv) has been determined. The dual catalytic system ( 1 / 2 ) allows repeated recycling and reuse (10 cycles). The potential of this methodology is demonstrated by a two‐step synthesis of a phenoperidine analogue (68 % overall yield; 98 % ee) and by the preparation of highly enantioenriched 1,3‐diols 4 and 3‐methylamino‐1‐arylpropanols 5 , key intermediates in the synthesis of a variety of druglike structures.     

α‐olefin homopolymerization and ethylene/1‐hexene copolymerization catalysed by novel ansa‐group IV complexes/MAO system

The catalytic properties of a set of ansa‐complexes (R‐Ph)₂C(Cp)(Ind)MCl₂ [R = ^tBu, M = Ti ( 3 ), Zr ( 4 ) or Hf ( 5 ); R = MeO, M = Zr ( 6 ), Hf ( 7 )] in α‐olefin homopolymerization and ethylene/1‐hexene copolymerization were explored in the presence of MAO (methylaluminoxane). Complex 4 with steric bulk ^tBu group on phenyl exhibited remarkable catalytic activity for ethylene polymerization. It was 1.6‐fold more active than complex 11 [Ph₂C(Cp)(Ind)ZrCl₂] at 11 atm ethylene pressure and was 4.8‐fold more active at 1 atm pressure. The introduction of bulk substituent ^tBu into phenyl groups not only increased the catalytic activity greatly but also enhanced the content of 1‐hexene in ethylene/1‐hexene copolymerization. The highest 1‐hexene incorporation was 25.4%. In addition, 4 was also active for propylene and 1‐hexene homopolymerization, respectively, and low isotactic polypropylene (mmmm = 11.3%) and isotactic polyhexene (mmmm = 31.6%) were obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Pyridylidene‐Mediated Dihydrogen Activation Coupled with Catalytic Imine Reduction

In recent years, dihydrogen activation at non‐metallic centers has received increasing attention. A system in which dihydrogen is trapped by a pyridylidene intermediate that is generated from a pyridinium salt and a base is now reported. The dihydropyridine formed in this process can act as reducing agent towards organic electrophiles. By coupling the hydrogen‐activation step with subsequent hydride transfer from the dihydropyridine to an imine, a catalytic process was established. Treatment of the N‐phenylimine of phenyl trifluoromethyl ketone with 5–20 mol % of N‐mesityl‐3,5‐bis(2,6‐dimethylphenyl)pyridinium triflate and 0.3–1.0 equivalents of LiN(SiMe₃)₂ under 50 bar of hydrogen gas resulted in high conversion into the corresponding amine.     

Seven 5‐benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazoles: unexpected isomorphisms,and hydrogen‐bonded supramolecular structures in zero,one and two dimensions

5‐Benzylamino‐3‐tert‐butyl‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₃N₃, (I), and its 5‐[4‐(trifluoromethyl)benzyl]‐, C₂₁H₂₂F₃N₃, (III), and 5‐(4‐bromobenzyl)‐, C₂₀H₂₂BrN₃, (V), analogues, are isomorphous in the space group C2/c, but not strictly isostructural; molecules of (I) form hydrogen‐bonded chains, while those of (III) and (V) form hydrogen‐bonded sheets, albeit with slightly different architectures. Molecules of 3‐tert‐butyl‐5‐(4‐methylbenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₁H₂₅N₃, (II), are linked into hydrogen‐bonded dimers by a combination of N—H...π(arene) and C—H...π(arene) hydrogen bonds, while those of 3‐tert‐butyl‐5‐(4‐chlorobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂ClN₃, (IV), form hydrogen‐bonded chains of rings which are themselves linked into sheets by an aromatic π–π stacking interaction. Simple hydrogen‐bonded chains built from a single N—H...O hydrogen bond are formed in 3‐tert‐butyl‐5‐(4‐nitrobenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₀H₂₂N₄O₂, (VI), while in 3‐tert‐butyl‐5‐(3,4,5‐trimethoxybenzylamino)‐1‐phenyl‐1H‐pyrazole, C₂₃H₂₉N₃O₃, (VII), which crystallizes with Z′ = 2 in the space group P, pairs of molecules are linked into two independent centrosymmetric dimers, one generated by a three‐centre N—H...(O)₂ hydrogen bond and the other by a two‐centre N—H...O hydrogen bond.     

A scalable Nenitzescu synthesis of 2‐methyl‐4‐(trifluoromethyl)‐1H‐indole‐5‐carbonitrile

2‐Methyl‐4‐(trifluoromethyl)‐1H‐indole‐5‐carbonitrile is a key intermediate in the synthesis of selective androgen receptor modulators discovered in these laboratories. A practical and convergent synthesis of the title compound starting from 4‐nitro‐3‐(trifluoromethyl)phenol and tert‐butyl acetoacetate was developed, including a telescoped procedure for synthesis (without isolation) and Nenitzescu reaction of 2‐trifluoromethyl‐1,4‐benzoquinone. Conversion of the known Nenitzescu indole product to a novel triflate intermediate followed by palladium‐catalyzed cyanation afforded a penultimate carbonitrile. Removal of the C‐3 tert‐butyl ester group on the indole through a decarboxylative pathway completed the synthesis of the title compound in six steps (27% overall yield) from 4‐nitro‐3‐(trifluoromethyl)phenol (five steps, 37% overall yield from tert‐butyl acetoacetate). J. Heterocyclic Chem., (2011).     

A Transition‐Metal‐Free Synthesis of Fluorinated Naphthols

Herein, we describe a transition‐metal‐free protocol for the conversion of simple 2‐allyl‐3‐(trifluoromethyl)phenols into substituted 5‐fluoronaphthalen‐1‐ols. The key events of this reaction include the selective activation of two C?F bonds and formation of an intermediate hexatriene system, which undergoes a 6π electrocyclization, followed by rearomatization. This concept enables the rapid conversion (three steps) of various commercially available 3‐(trifluoromethyl)phenols into novel fluorine‐containing naphthols, which are difficult to prepare by previous methods. The reported sequence was also extended to a one‐pot transformation of 3‐(trifluoromethyl)phenols into 5‐fluoronaphthalen‐1‐ols.     

Copper‐Catalyzed C(sp3)−H/C(sp3)−H Cross‐Dehydrogenative Coupling with Internal Oxidants: Synthesis of 2‐Trifluoromethyl‐Substituted Dihydropyrrol‐2‐ols

The first oxidative C(sp³)−H/C(sp³)−H cross‐dehydrogenative coupling (CDC) reaction promoted by an internal oxidant is reported. This copper‐catalyzed CDC reaction of oxime acetates and trifluoromethyl ketones provides a simple and efficient approach towards 2‐trifluoromethyldihydropyrrol‐2‐ol derivatives in a highly diastereoselective manner by cascade C(sp³)−C(sp³) bond formation and cyclization. These products were further transformed into various significant and useful trifluoromethylated heterocyclic compounds, such as trifluoromethylated furan, thiophene, pyrrole, dihydropyridazine, and pyridazine derivatives. A trifluoromethylated analogue of an Aβ₄₂ lowering agent was also synthesized smoothly. Preliminary mechanistic studies indicated that this reaction involves a copper(I)/copper(III) catalytic cycle with the oxime acetate acting as an internal oxidant.     

Double CF Bond Activation through β‐Fluorine Elimination: Nickel‐Mediated [3+2] Cycloaddition of 2‐Trifluoromethyl‐1‐alkenes with Alkynes

The nickel‐mediated [3+2] cycloaddition of 2‐trifluoromethyl‐1‐alkenes with alkynes afforded fluorine‐containing multi‐substituted cyclopentadienes in a regioselective manner. This reaction involves the consecutive two C? F bond cleavage of a trifluoromethyl or a pentafluoroethyl group through β‐fluorine elimination.     

Asymmetric anionic polymerizations of 7‐(o‐substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methides: Electrostatic interaction and steric,inductive, and resonance effects of the ortho‐substituent on the optical activity

7‐(o‐Substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methides which have an electron‐donating methoxy‐(o‐OMe, 2a ) and methyl‐ (o‐Me, 2b ) substituents or an electron‐withdrawing cyano‐ (o‐CN, 2c ) and trifluoromethyl‐ (o‐CF₃, 2d ) substituents at the ortho‐position of the aromatic ring and 7‐(m‐substituted phenyl)‐2,6‐dimethyl‐1,4‐benzoquinone methide with an electron‐withdrawing trifluoromethyl‐ (m‐CF₃, 2e ) substituent at the meta‐position of the aromatic ring were synthesized, and their asymmetric anionic polymerizations using the complex of lithium 4‐isopropylphenoxide with (?)‐sparteine were carried out in toluene at 0 °C. The polymers with negative optical activity were obtained for all of five monomers, and their specific rotation values largely changed depending upon the substituents of the monomers. On the basis of the comparison of various substituents effects, it was found that the specific rotation of obtained polymers is significantly affected by the electronic effects such as inductive and resonance effects rather than the steric and electrostatic effects of the substituent. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1048–1058     

Unusual behaviour of N‐cinnamoyl‐2‐hydroxy‐2‐(trifluoromethyl)‐arylethylamines in pictet‐gams cyclization. Synthesis of 2‐styryl‐5‐aryl‐5‐trifluoromethyl‐2‐oxazolines

Cyclization of N‐acyl‐2‐hydroxy‐2‐(trifluoromethyl)arylethylamines 4 under Pictet‐Gams conditions afforded 2‐oxazolines 5 instead of the expected isoquinolines 6 . The effect of the trifluoromethyl group on the result of the reaction is discussed.