Synthesis,structure and electrocatalytic properties of a water‐soluble copper complex supported by 2‐ethyl‐2‐(2‐hydroxybenzylideneamino)propane‐1,3‐diol ligand

The reaction of 2‐ethyl‐2‐(2‐hydroxybenzylideneamino)propane‐1,3‐diol (H₃L) with CuCl₂⋅2H₂O affords a new copper complex, [ClCu(H₂L)], which has been determined using X‐ray crystallography. In the solid, copper atom is four‐coordinated by two oxygen atoms and one nitrogen atom from the ligand and one chlorine atom. Electrochemical studies show that the complex can act as an electrocatalyst for hydrogen evolution from a dimethylformamide solution of acetic acid and a neutral buffer (pH = 7.0) with a turnover frequency of 46.2 and 482 moles of hydrogen per mole of catalyst per hour at an overpotential of 941.6 and 837.6 mV, respectively.     

A trinuclear palladium(II) complex containing N,S‐coordinating 2‐(benzylsulfanyl)anilinide and 1,3‐benzothiazole‐2‐thiolate ligands with a central square‐planar PdN4 motif

The reaction of dichlorido(cod)palladium(II) (cod = 1,5‐cyclooctadiene) with 2‐(benzylsulfanyl)aniline followed by heating in N,N‐dimethylformamide (DMF) produces the linear trinuclear Pd₃ complex bis(μ₂‐1,3‐benzothiazole‐2‐thiolato)bis[μ₂‐2‐(benzylsulfanyl)anilinido]dichloridotripalladium(II) N,N‐dimethylformamide disolvate, [Pd₃(C₇H₄NS₂)₂(C₁₃H₁₂NS)₂Cl₂]·2C₃H₇NO. The molecule has symmetry and a Pd...Pd separation of 3.2012 (4) Å. The outer Pd^II atoms have a square‐planar geometry formed by an N,S‐chelating 2‐(benzylsulfanyl)anilinide ligand, a chloride ligand and the thiolate S atom of a bridging 1,3‐benzothiazole‐2‐thiolate ligand, while the central Pd^II core shows an all N‐coordinated square‐planar geometry. The geometry is perfectly planar within the PdN₄ core and the N—Pd—N bond angles differ significantly [84.72 (15)° for the N atoms of ligands coordinated to the same outer Pd atom and 95.28 (15)° for the N atoms of ligands coordinated to different outer Pd atoms]. This trinuclear Pd₃ complex is the first example of one in which 1,3‐benzothiazole‐2‐thiolate ligands are only N‐coordinated to one Pd centre. The 1,3‐benzothiazole‐2‐thiolate ligands were formed in situ from 2‐(benzylsulfanyl)aniline.     

1‐(2‐Hydroxyethyl)‐3‐nitro‐1, 2, 4‐triazole and its Complexes with Copper(II) Chloride and Copper(II) Perchlorate

1‐(2‐Hydroxyethyl)‐3‐nitro‐1, 2, 4‐triazole (hnt), prepared by alkylation of 3‐nitro‐1, 2, 4‐triazole with 2‐chloroethanol, was found to react with copper(II) chloride and copper(II) perchlorate in acetonitrile/ethanol solutions giving complexes [Cu₂(hnt)₂Cl₄(H₂O)₂] and[Cu(hnt)₂(H₂O)₃](ClO₄)₂, respectively. They are the first examples of coordination compounds with a neutral N‐substituted 3‐nitro‐1, 2, 4‐triazole ligand. 1‐(2‐Hydroxyethyl)‐3‐nitro‐1, 2, 4‐triazole and the obtained complexes were characterized by NMR and IR spectroscopy, X‐ray, and thermal analyses. [Cu₂(hnt)₂Cl₄(H₂O)₂] presents a dinuclear chlorido‐bridged complex in which hnt acts as a chelating bidentate ligand, coordinated to the metal by a nitrogen atom of the triazole ring and an oxygen atom of the nitro group, and the copper atoms are inconsiderably distorted octahedral coordination. [Cu(hnt)₂(H₂O)₃](ClO₄)₂comprises a mononuclear complex cation, in which two nitrogen atoms of two hnt ligands in trans configuration and three water oxygen atoms form a square pyramidal environment around the copper atom, which is completed to an distorted octahedron with a bifurcated vertex due to two additional elongated Cu–O bonds with two nitro groups. In both complexes, Cu–O bonds with the nitro groups may be considered as semi‐coordinated.     

catena‐Poly[[[2,4‐dichloro‐6‐(pyridin‐2‐ylmethyl­iminomethyl)phenolato]copper(II)]‐μ‐thio­cyanato]

The title complex, [Cu(C₁₃H₉Cl₂N₂O)(NCS)]_n, is a novel thio­cyanate‐bridged polynuclear copper(II) compound. The Cu^II atom is five‐coordinated in a square‐pyramidal configuration, with one O and two N atoms of one Schiff base ligand and one terminal N atom of a bridging thio­cyanate ligand defining the basal plane, and one terminal S atom of another bridging thio­cyanate ligand occupying the axial position. The [2,4‐dichloro‐6‐(pyridin‐2‐ylmethyl­imino­methyl)­phenolato]­copper(II) moieties are linked by the bridging thio­cyanate ligands, forming polymeric chains running along the a axis.     

Syntheses and Structures of Three Copper Coordination Polymers Based on Bis(triazol‐1‐ylmethyl)benzene

Three copper(II) coordination polymers [Cu(mbtz)₂(NCS)₂]_n ( 1 ), [Cu(mbtz)₂Cl₂]_n ( 2 ) and [Cu(mbtz)(btec)_0.5]_n ( 3 ) (mbtz=1,3‐bis(1,2,4‐triazol‐1‐ylmethyl)benzene, btec=1,2,4,5‐benzenetetracarboxylate) were synthesized. In 1 and 2 , two mbtz ligands are wrapped around each other and are held together by Cu(II) atoms to form one‐dimensional double chain. In 3 , each btec ligand connects four Cu(II) atoms through its four carboxylate groups, resulting in a planar two‐dimensional [Cu(btec)_0.5]_n network. The Cu(II) atoms are further coordinated mbtz ligands to fulfil their coordination geometry and construct new [Cu(btec)_0.5(mbtz)]_n network. 2 and 3 further form the three‐dimensional network through the π···π stacking interactions between the mbtz ligands. The thermal stabilities of 1 , 2 and 3 were measured.     

[N,N′‐Bis­(salicyl­idene)‐2,2‐di­methyl‐1,3‐propane­diaminato]­nickel(II) and [N,N′‐bis­(salicyl­idene)‐2,2‐di­methyl‐1,3‐propane­diaminato]copper(II)

In the title compounds, {2,2′‐[2,2‐di­methyl‐1,3‐propane­diyl­bis­(nitrilo­methyl­idyne)]­diphenolato‐κ⁴N,N′,O,O′}nickel(II), [Ni(C₁₉H₂₀N₂O₂)], and {2,2′‐[2,2‐di­methyl‐1,3‐propane­diyl­bis­(nitrilo­methyl­idyne)]­diphenolato‐κ⁴N,N′,O,O′}copper(II), [Cu(C₁₉H₂₀N₂O₂)], the Ni^II and Cu^II atoms are coordinated by two iminic N and two phenolic O atoms of the N,N′‐bis­(salicyl­idene)‐2,2‐di­methyl‐1,3‐propane­diaminate (SALPD^2?, C₁₇H₁₆N₂O₂^2?) ligand. The geometry of the coordination sphere is planar in the case of the Ni^II complex and distorted towards tetrahedral for the Cu^II complex. Both complexes have a cis configuration imposed by the chelate ligand. The dihedral angles between the N/Ni/O and N/Cu/O coordination planes are 17.20 (6) and 35.13 (7)°, respectively.     

Polynuclear Chlorido Metal(II) Complexes with 1,2‐Di(1H‐­tetrazol‐1‐yl)ethane as Ligand Forming One‐ and Two‐dimensional Structures

The preparation and characterization of three metal(II) chlorido complexes with 1,2‐di(1H‐tetrazol‐1‐yl)ethane (dte) ( 1 ) as ligand is presented. The complexes have the following formula: [CoCl₂(μ‐dte)(dte)₂]_n ( 2 ), [CuCl₂(μ‐dte)₂]_n ( 3 ), and [Cd(μ‐Cl)₂(μ‐dte)]_n ( 4 ). Single crystal X‐ray diffraction of all three metal complexes was performed and the structures are discussed. All three central metal atoms are connected to polynuclear structures by the μ‐bridging ligand. Cobalt and copper are connected to one‐dimensional chains. The central cadmium(II) atoms are additionally connected by the chloride anions to a two‐dimensional network. Further, the cobalt(II) complex represents a special case with two terminal dte ligands.     

Synthesis,crystal structure and spectroscopic properties of trans‐dibromidobis(2,2‐dimethylpropane‐1,3‐diamine‐κ2N,N′)chromium(III) perchlorate

The title complex salt, trans‐anti‐[CrBr₂(Me₂tn)₂]ClO₄ (where Me₂tn = 2,2‐dimethylpropane‐1,3‐diamine, C₅H₁₄N₂), was prepared and its structure determined by single‐crystal X‐ray diffraction at 100 K. The asymmetric unit contains three conformationally similar complex cations and three perchlorate anions. In each complex cation, the Cr^III centre is coordinated by four N atoms of two chelating Me₂tn ligands in the equatorial plane and by two Br atoms in a trans‐axial arrangement, to give a distorted octahedral geometry. Interionic contacts are dominated by extensive hydrogen bonding, involving the NH groups of the Me₂tn ligand as donors and the anion O atoms or coordinated Br atoms as acceptors, resulting in two‐dimensional layers in the bc plane. Ligand field analysis based on the angular overlap model, and IR and electronic spectroscopic properties, are also discussed.     

catena‐Poly[[{4‐bromo‐2‐[2‐(dimethyl­amino)ethyl­imino­methyl]­phenol­ato}­copper(II)]‐μ‐azido]

The title complex, [Cu(C₁₁H₁₄BrN₂O)(N₃)]_n, is an inter­esting azide‐bridged polynuclear copper(II) compound. The Cu^II atom is five‐coordinated in a square‐pyramidal configuration, with one O and two N atoms of one Schiff base and one terminal N atom of a bridging azide ligand defining the basal plane, and another terminal N atom of another bridging azide ligand occupying the axial position. The {4‐bromo‐2‐[2‐(dimethyl­amino)ethyl­imino­meth­yl]phenolato}copper(II) moieties are linked by the bridging azide ligands, forming polymeric chains running along the b axis. Adjacent chains are further linked by weak Br⋯Br inter­actions into a sheet.     

A Three—Dimensional Lead(II) Polymer with Bridging Saccharinate and Unusually Coordinated Acetate Ligands — Synthesis,IR Spectra,and Crystal Structure of [Pb(H2O)(μ‐OAc)(μ‐sac)]n

The complex [Pb(H₂O)(μ‐OAc)(μ‐sac)]n with acetate (OAc) and saccharinate (sac) ligands was characterized by IR, elemental analysis and X‐ray crystallography. The mixed‐anion lead(II) complex crystallizes in the triclinic crystal system with the space group of P1¯. The single crystal X‐ray analysis shows that the complex is a coordination polymer in which the lead(II) ions have a highly distorted pentagonal bipyramidal coordination geometry. Lead(II) ions are bridged by carboxylate groups in a zigzag arrangement forming one‐dimensional infinite chains, which are also linked by sac bridges and aromatic π‐π contacts between the adjacent phenyl rings of sac ligands, resulting in a three‐dimensional network. One water molecule coordinates the lead(II) ion and also forms weak hydrogen bonds with the sulfonyl oxygen atoms of the neighboring sac ligands. The sac ligand acts as a bridging ligand through the nitrogen and carbonyl oxygen atoms, while the carboxylate moiety of the acetate ligand shows an unusual (bidentate, and bridging) coordination behaviour, which was observed for the first time in the structure.     

catena‐Poly[bis[(η2‐1‐allyl‐3‐aminopyridinium)copper(I)]‐di‐μ‐chloro‐copper(I)‐di‐μ‐chloro‐copper(I)‐di‐μ‐chloro]

Crystals of the title π‐complex, [Cu₄Cl₆(C₈H₁₁N₂)₂]_n, were obtained by means of alternating‐current electrochemical synthesis. The structure consists of infinite copper–chlorine chains to which 1‐allyl‐3‐amino­pyridinium moieties are attached via a η² Cu—(C=C) interaction. The two independent Cu atoms have distinct coordination environments. One is three‐coordinate, surrounded by two chloro ligands and the olefinic bond, whereas the second copper center is surrounded by a tetrahedral arrangement of four Cl atoms. The lower basicity of 3‐amino­pyridine as compared with 2‐ and 4‐amino­pyridine lowers the capacity of the organic ligand for donating to N—H⋯Cl hydrogen bonds and results in the formation of a large inorganic fragment.     

One‐dimensional copper(II) coordination polymers based on 1,3‐bis(pyridin‐4‐yl)propane and diimine ligands

Two one‐dimensional (1D) coordination polymers (CPs), namely catena‐poly[[[aqua(2,2′‐bipyridine‐κ²N,N′)(nitrato‐κO)copper(II)]‐μ‐1,3‐bis(pyridin‐4‐yl)propane‐κ²N:N′] nitrate], {[Cu(NO₃)(C₁₀H₈N₂)(C₁₃H₁₄N₂)(H₂O)]·NO₃}_n ( 1 ), and catena‐poly[[[aqua(nitrato‐κO)(1,10‐phenanthroline‐κ²N,N′)copper(II)]‐μ‐1,3‐bis(pyridin‐4‐yl)propane‐κ²N:N′] nitrate], {[Cu(NO₃)(C₁₂H₈N₂)(C₁₃H₁₄N₂)(H₂O)]·NO₃}_n ( 2 ), have been synthesized using [Cu(NO₃)(NN)(H₂O)₂]NO₃, where NN = 2,2′‐bipyridine (bpy) or 1,10‐phenanthroline (phen), as a linker in a 1:1 molar ratio. The CPs were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray structure determination. The 1,3‐bis(pyridin‐4‐yl)propane (dpp) ligand acts as a bridging ligand, leading to the formation of a 1D polymer. The octahedral coordination sphere around copper consists of two N atoms from bpy for 1 or phen for 2 , two N atoms from dpp, one O atom from water and one O atom from a coordinated nitrate anion. Each structure contains two crystallographically independent chains in the asymmetric unit and the chains are linked via hydrogen bonds into a three‐dimensional network.     

Bis­[1,3‐bis(2‐methyl­tetrazol‐5‐yl‐κN4)­triazenido‐κN2]­nickel(II)

The title compound, [Ni(BMTT)₂], where BMTT is 1,3‐bis(2‐methyl­tetrazol‐5‐yl)­triazenide (C₄H₆N₁₁), presents a molecular complex with tridentate ligands. The tridentate mode of the ligand is realised through the central N atom of the triazene group and two N atoms of the two tetrazole rings. The [Ni(BMTT)₂] mol­ecule is the meridional isomer, with crystallographic symmetry in space group P4₂/n. The nickel centre has a distorted octahedral environment, with two axial Ni—N bonds of 2.041 (2) Å and four equatorial Ni—N bonds of 2.0739 (14) Å. The mol­ecules are linked together by van der Waals interactions only.     

catena‐Poly[[{4‐bromo‐2‐[2‐(di­methyl­amino)­ethyl­imino­meth­yl]­phenolato}­copper(II)]‐μ‐thio­cyanato]

The title complex, [Cu(C₁₁H₁₄BrN₂O)(NCS)]_n, is an inter­esting thio­cyanate‐bridged polynuclear copper(II) compound, which crystallizes with two independent mol­ecules in the asymmetric unit. Each Cu^II atom is five‐coordinate in a square‐pyramidal configuration, with one O and two N atoms of one Schiff base ligand and one terminal N atom of a bridging thio­cyanate ligand defining the basal plane, and one terminal S atom of another bridging thio­cyanate ligand occupying the apical position. The {4‐bromo‐2‐[2‐(dimethyl­amino)ethyl­imino­meth­yl]phenolato}copper(II) units are linked by the bridging thio­cyanate ligands, forming polymeric chains running along the a axis. There are weak inter­molecular C—H⋯O and C—H⋯S hydrogen bonds between the chains in the crystal structure.     

(N‐{[4‐(1,3‐Benzothiazol‐2‐yl)anilino]carbonylmethyl‐κO}iminodiacetato‐κ3O,N,O′)(1,10‐phenanthroline‐κ2N,N′)cobalt(II) pentahydrate

The title compound, [Co(C₁₉H₁₅N₃O₅S)(C₁₂H₈N₂)]·5H₂O, has a moderately distorted octahedral coordination environment composed of two N atoms of a 1,10‐phenanthroline ligand and one N and three O atoms of an N‐{[4‐(1,3‐benzothiazol‐2‐yl)anilino]carbonylmethyl}iminodiacetate (ZL‐5²⁻) ligand. The ring systems of the phenanthroline and ZL‐5²⁻ ligands are coplanar and the complexes pack in layers parallel to the ab plane with the rings of adjacent complexes facing one another. The layers stack along the c axis and are linked by hydrogen bonds involving the five water solvent molecules in the asymmetric unit and O atoms of the acetate groups of the ZL‐5²⁻ ligand. This is believed to be the first crystal structure of a complex of a 2‐(4‐aminophenyl)benzothiazole ligand.     

Das 1,3‐Dimethylcyanurat‐Ion als ambidenter Ligand

The 1,3‐Dimethylcyanurate Ion as an Ambident Ligand 1,3‐Dimethyl‐2,4,6‐trioxo‐1,3,5‐triazin ( 7 ), (1,3‐dimethylcyanuric acid, DMCH), obtained from the thermolysis of methyl urea, is deprotonated with lithium ethylate. In the resulting dinuclear complex [(DMCLi)₂·4 H₂O] ( 8 ), the heterocyclic anions are linked to the lithium centres with oxygen atoms as its enolate form. In the corresponding silver complex [(DMCAg)₂·en] ( 10 ), (en = ethylendiamine), N‐coordination of the ligand is observed. The crystal structures of 7 , 8 , and 10 reveal the presence of intermolecular hydrogen bonds.     

Poly[[diaquabis[μ2‐2‐(4‐pyridinio)propane‐1,3‐dionato‐κ2O:O′]cobalt(II)] dinitrate]

The title compound, {[Co(C₈H₇NO₂)₂(H₂O)₂](NO₃)₂}_n, is the first d‐metal ion complex involving bidentate bridging of a β‐dialdehyde group. The Co²⁺ ion is situated on an inversion centre and adopts an octahedral coordination with four equatorial aldehyde O atoms [Co—O = 2.0910 (14) and 2.1083 (14) Å] and two axial aqua ligands [Co—O = 2.0631 (13) Å]. The title compound has a two‐dimensional square‐grid framework structure supported by propane‐1,3‐dionate O:O′‐bridges between the metal ions. The organic ligand itself possesses a zwitterionic structure, involving conjugated anionic propane‐1,3‐dionate and cationic pyridinium fragments. Hydrogen bonding between coordinated water molecules, the pyridinium NH group and the nitrate anions [O...O = 2.749 (2) and 2.766 (3) Å, and N...O = 2.864 (3) Å] is essential for the crystal packing.     

A twofold interpenetrating three‐dimensional CdII coordination framework: poly[[μ2‐1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene](μ3‐5‐nitrobenzene‐1,3‐dicarboxylato)cadmium(II)]

A twofold interpenetrating three‐dimensional Cd^II coordination framework, [Cd(C₈H₃NO₆)(C₁₄H₁₄N₄)]_n, has been prepared and characterized by IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. The asymmetric unit consists of a divalent Cd^II atom, one 1,3‐bis(2‐methyl‐1H‐imidazol‐1‐yl)benzene (1,3‐BMIB) ligand and one fully deprotonated 5‐nitrobenzene‐1,3‐dicarboxylate (NO₂‐BDC²⁻) ligand. The coordination sphere of the Cd^II atom consists of five O‐donor atoms from three different NO₂‐BDC²⁻ ligands and two imidazole N‐donor atoms from two different 1,3‐BMIB ligands, forming a distorted {CdN₂O₅} pentagonal bipyramid. The NO₂‐BDC ligand links three Cd^II atoms via a μ₁‐η¹:η¹ chelating mode and a μ₂‐η²:η¹ bridging mode. The title compound is a twofold interpenetrating 3,5‐connected network with the {4².6⁵.8³}{4².6} topology. In addition, the compound exhibits fluorescence emissions in the solid state at room temperature.     

Bis(1‐ferrocenylbutane‐1,3‐dionato‐κ2O,O′)copper(II) and bis­(1,3‐diferrocenylpropane‐1,3‐dionato‐κ2O,O′)­copper(II)

The title compounds, [CuFe₂(C₅H₅)₂(C₉H₈O₂)₂], (I), and [CuFe₄(C₅H₅)₄(C₁₃H₉O₂)₂], (II), are four‐coordinate square‐planar copper(II) complexes with two bidentate 1‐ferrocenylbutane‐1,3‐dionate or 1,3‐diferrocenylpropane‐1,3‐dionate ligands, respectively. The copper ion in (I) lies on an inversion centre, with one‐half of the mol­ecule in the asymmetric unit, while in (II), there are two independent half mol­ecules in the asymmetric unit, with the copper ions also situated on inversion centres. The ferrocene substituents in (I) are in an anti arrangement. The mol­ecules assemble in the crystal structure in layers with ferrocene groups at the surface. The pairs of ferrocene substituents on each ligand in complex (II) are syn and these adopt an anti arrangement with respect to the pair on the other diketonate ligand. As found in (I), complexes assemble in a layered structure with ferrocene‐coated surfaces.     

Poly[[di­aqua­barium(II)]‐μ5‐m‐phenylenedioxydiacetato]: a three‐dimensional barium(II) coordination polymer

In the title coordination polymer, [Ba(1,3‐BDOA)(H₂O)₂]_n (where 1,3‐BDOA²⁻ is the m‐phenylenedioxydiacetate dianion, C₁₀H₈O₆), each Ba^II ion is ten‐coordinated by six carboxyl O atoms and two ether O atoms from different 1,3‐BDOA²⁻ ligands, as well as by two water mol­ecules, thus defining a dodeca­hedron. The Ba^II atoms are covalently linked by 1,3‐BDOA²⁻ ligands in different crystallographic directions, giving rise to a three‐dimensional open framework. The crystal structure is further stabilized by hydrogen bonds and π–π stacking inter­actions. In previously studied polymers of this type, the 1,3‐BDOA²⁻ ligand showed multiple bridging modes with metal ions, including bi‐, tri‐, tetra‐ and hexa­dentate. The title Ba^II complex represents a novel three‐dimensional coordination polymer constructed by octa­dentate bridging 1,3‐BDOA²⁻ ligands.