Synthesis of well‐defined pH‐responsive PPEGMEA‐g‐P2VP double hydrophilic graft copolymer via sequential SET‐LRP and ATRP

A series of well‐defined double hydrophilic graft copolymers containing poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA) backbone and poly(2‐vinylpyridine) (P2VP) side chains were synthesized by successive single electron transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was first prepared by SET‐LRP of poly(ethylene glycol) methyl ether acrylate (PEGMEA) macromonomer using CuBr/tris(2‐(dimethylamino)ethyl)amine as catalytic system. The obtained homopolymer then reacted with lithium diisopropylamide and 2‐chloropropionyl chloride at ?78 °C to afford PPEGMEA‐Cl macroinitiator. poly(poly(ethylene glycol) methyl ether acrylate)‐g‐poly(2‐vinylpyridine) double hydrophilic graft copolymers were finally synthesized by. ATRP of 2‐vinylpyridine initiated by PPEGMEA‐Cl macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as catalytic system via the grafting‐ from strategy. The molecular weights of both the backbone and the side chains were controllable and the molecular weight distributions kept relatively narrow (M_w/M_n ≤ 1.40). pH‐Responsive micellization behavior was investigated by ¹H NMR, dynamic light scattering, and transmission electron microscopy and this kind of double hydrophilic graft copolymer aggregated to form micelles with P2VP‐core while pH of the aqueous solution was above 5.0. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Homo‐ and Copolymerization of Phenacyl Methacrylate via the Atom Transfer Radical Polymerization Method

The homo‐ and copolymers via atom transfer radical (co)polymerization (ATRP) of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) and t‐butyl methacrylate (t‐BMA) was performed in bulk at 90°C in the presence of ethyl 2‐bromoacetate, cuprous(I)bromide (CuBr), and 2,2′‐bipyridine. The polymerization of PAMA was carried out at 70, 80, and 100°C. Also, free‐radical polymerization of PAMA was carried out at 60°C. Characterization using FT‐IR and ¹³C‐NMR techniques confirmed the formation of a five‐membered lactone ring through ATRP. The in situ addition of methylmethacrylate to a macroinitiator of poly(phenacyl methacrylate) [Mn=2800, Mw/Mn=1.16] afforded an AB‐type block copolymer [Mn=13600, Mw/Mn=1.46]. When PAMA units increased in the living copolymer system, the Mn values and the polydispersities were decreased (1.1<Mw/Mn<1.79). The monomer reactivity ratios were computed using Kelen‐Tüdös (K‐T), Fineman‐Ross (F‐R) and Tidwell‐Mortimer (T‐M) methods and were found to be r₁= 1.17; r₂= 0.76; r₁=1.16; r₂=0.75 and r₁=1.18; r₂=0.76, respectively (r₁=is monomer reactivity ratio of PAMA). The initial decomposition temperatures of the resulting copolymers were measured by TGA. Blends of poly(PAMA) and poly(MMA) obtained via the ATRP method have been characterized by differential thermal and thermogravimetric analyses.     

Synthesis of miktoarm star amphiphilic block copolymers via combination of NMRP and ATRP and investigation on self‐assembly behaviors

The novel trifunctional initiator, 1‐(4‐methyleneoxy‐2,2,6,6‐tetramethylpip‐eridinoxyl)‐3,5‐bi(bromomethyl)‐2,4,6‐trimethylbenzene (TEMPO‐2Br), was successfully synthesized and used to prepare the miktoarm star amphiphilic poly(styrene)‐(poly(N‐isopropylacrylamide))₂ (PS(PNIPAAM)₂) via combination of atom transfer radical polymerization (ATRP) and nitroxide‐mediated radical polymerization (NMRP) techniques. Furthermore, the star amphiphilic block copolymer, poly (styrene)‐(poly(N‐isopropylacrylamide‐b‐4‐vinylpyridine))₂ (PS(PNIPAAM‐b‐P4VP)₂), was also prepared using PS(PNIPAAM)₂ as the macroinitiator and 4‐vinylpyridine as the second monomer by ATRP method. The obtained polymers were well‐defined with narrow molecular weight distributions (M_w/M_n ≤ 1.29). Meanwhile, the self‐assembly behaviors of the miktoarm amphiphilic block copolymers, PS(PNIPAAM)₂ and PS(PNIPAAM‐b‐P4VP)₂, were also investigated. Interestingly, the aggregate morphology changed from sphere‐shaped micelles (4.7 < pH < 3.0) to a mixture of spheres and rods (1.0 < pH < 3.0), and rod‐shaped nanorods formed when pH value was below 1.0. The LCST of PS(PNIPAAM)₂ (pH = 7) was about 31 °C and the LCST of PS(PNIPAAM‐b‐P4VP)₂ was about 35 °C (pH = 3). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6304–6315, 2009     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate)[poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

A Study on End Group Characterization of Poly(phenacyl methacrylate) Polymer Produced by Free Radical Polymerization

Free‐radical homopolymerization and copolymerization of phenacyl methacrylate (PAMA) with methyl methacrylate (MMA) was done using 2,2′‐azobis(isobutyronitrile) (AIBN) as the initiator in 1,4‐dioxane at 60°C. ¹H‐NMR and FT‐IR spectroscopy confirmed the existence of OCH₂ and CH signals and unsaturated structure and CN stretch at the chain end of low molecular weight poly(phenacyl methacrylate) [poly(PAMA)], respectively. The six‐membered ring with both ester and ether at the end group was detected by ¹H‐NMR. In the poly(PAMA), the end groups formed due to chain transfer reactions were found in large concentrations. The mechanism of the formation of end groups has been presented. The behavior of free radical polymerization of PAMA was compared with that of phenoxycarbonylmethyl methacrylate (PCMMA). The molecular weight distribution of the homo and copolymers was determined using gel permeation chromatography. Thermal properties of the polymers were determined using differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

Synthesis,structure, and properties of poly[1‐(trimethylgermyl)‐1‐propyne]

Polymerization of 1‐(trimethylgermyl)‐1‐propyne (TMGP) with TaCl₅ and NbCl₅ produced a colorless polymer in high yields, whose molecular weight reached about 3 × 10⁵–14 × 10⁵. The molecular weight distribution of the poly(TMGP) with NbCl₅ in cyclohexane was somewhat narrow (M_w /M_n = ∼1.54). The TaCl₅‐based poly(TMGP) dissolved in toluene, chloroform, cyclohexane, carbon disulfide, carbon tetrachloride, tetrahydrofuran, hexane, and so forth; the NbCl₅‐based polymer was less soluble and did not dissolve in hexane, despite its lower molecular weight. The cis contents of the NbCl₅‐ and TaCl₅‐based poly(TMGP)s determined by ¹³C NMR were 67 ± 5 and 28 ± 3%, respectively. The onset temperature of the weight loss of poly(TMGP) in air was 350 °C, indicating fair thermal stability. The oxygen permeability coefficient (P) of poly(TMGP) at 25 °C was 7800 barrer after the methanol conditioning, and the permeability was fairly stable to aging. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2964–2969, 2000     

Effect of isomeric pyridine moieties in ethynylstyrene derivatives on their anionic polymerization

The anionic polymerization behaviors of ethynylstyrene derivatives containing isomeric pyridine moieties, 2‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( A ), 3‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( B ), and 4‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( C ), were investigated in the identical conditions. The anionic polymerization of A – C was performed with (diphenylmethyl)potassium (Ph₂CHK) in tetrahydrofuran (THF) at ?78 °C. The polymerization of A proceeded quantitatively at –78 °C for 4 h, and the resulting poly( A ) possessed predictable molecular weights (M_n = 3300–68,500) and narrow molecular weight distributions (MWDs) (M_w/M_n = 1.04–1.11). In contrast, the anionic polymerization of B was not performed at –78 °C for 4 h due to the occurrence of side reactions. The monomer B was quantitatively recovered after the reaction. In the polymerization of C performed at –78 °C for 6 h, observed M_n values of the resulting poly( C ) were in good agreement with calculated molecular weights based on monomer to initiator ratios, but the MWDs were somewhat broad (M_w/M_n = 1.23–1.31). To estimate the reactivity of A and to characterize its living nature, the block copolymerization of A with 2‐vinylpyridine (2VP) and methyl methacrylate (MMA) was performed. The well‐defined block copolymers, poly(2VP)‐b‐poly( A ) and poly( A )‐b‐poly(MMA), were successfully synthesized without any additives. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The effect of SnCl4 on the radical polymerization of N-allyl-N-phenylmethacrylamide and N-allyl-N-phenylacrylamide

The effects of SnCl₄ on the radical polymerization of N-allyl-N-phenylmethacrylamide (APM) and N-allyl-N-phenylacrylamide (APA) were investigated. The polymerizations of APM and APA with dimethyl 2,2-azobisisobutyrate (MAIB) were carried out at 50°C in benzene at various concentrations (0-1.0 mol/L) of SnCl₄. The polymerization rates showed a maximum on varying the SnCl₄ concentration, while the molecular weights of the resulting poly(APM) and poly(APA) were decreased with increasing SnCl₄ concentration. In both systems, the degree of cyclization of polymers were decreased with the SnCl₄ concentration. From the IR results, the cyclic structure of the resulting poly(APM)s was confirmed to be five-membered, whereas poly(APA)s contained not only five-membered but also six-membered rings. The ¹H-NMR examination on the interactions of APM and APA with SnCl₄ revealed that these monomers form 1:1 and 2:1 complexes with SnCl₄ with fairly large stability constants. Copolymerizations of APM (M₁) with methyl methacrylate (MMA) and styrene (St) (M₂) were investigated at 60°C in benzene in the absence of SnCl₄. APM units were found to be incorporated exclusively as five-membered rings in the resulting copolymer. Monomer reactivity ratios were estimated to be r₁ = 0.29, r₂ = 4.88 for APM/MMA and r₁ = 0.66, r₂ = 5.39 for APM/St. The presence of equimolar (to APM) SnCl₄ was found to enhance the reactivity of APM toward poly(MMA) radical; r₁ = 0.24, r₂ = 2.56. © 1996 John Wiley & Sons, Inc.     

Synthesis,Crystal Structure,Hydrogen Bonding,and Thermal Behavior of a Three‐Dimensional CuII‐benzene‐1,2,4,5‐tetracarboxylate Templated by 1,9‐Diaminononane

Triclinic single crystals of Cu₄(H₃N–(CH₂)₉–NH₃)(OH)₂[C₆H₂(COO)₄]₂ · 5H₂O were prepared in aqueous solution at 80 °C in the presence of 1,9‐diaminononane. Space group P$\bar{1}$ (no. 2) with a = 1057.5(2), b = 1166.0(2), c = 1576.7(2) pm, α = 106.080(10)°, β = 90.73(2)° and γ = 94.050(10)°. The four crystallographic independent Cu²⁺ ions are surrounded by five oxygen atoms each with Cu–O distances between 191.4(3) and 231.7(4) pm. The connection between the Cu²⁺ coordination polyhedra and the [C₆H₂(COO)₄]^4– anions yields three‐dimensional framework with negative excess charge and wide centrosymmetric channel‐like voids. These voids extend parallel to [001] with the diagonal of the nearly rectangular cross‐section of approximately 900 pm. The channels of the framework accommodate [H₃N–(CH₂)₉–NH₃]²⁺ cations and water molecules, which are not connected to Cu²⁺. The nonane‐1,9‐diammonium cations adopt a partial gauche conformation. Thermoanalytical measurements in air show a loss of water of crystallization starting at 90 °C and finishing at approx. 170 °C. The dehydrated compound is stable up to 260 °C followed by an exothermic decomposition yielding copper oxide.     

Poly(phenyl methacrylate) and poly(1‐naphthyl methacrylate) prepared in microemulsions

Phenyl methacrylate and 1‐naphthyl methacrylate were polymerized in microemulsions using stearyltrimethylammonium chloride, cetyltrimethylammonium bromide, and a mixture of nonionic Triton surfactants to form latexes that were 20–30 nm in diameter. A temperature of 70 °C was needed to obtain polymers using thermal initiation. The tacticities of poly(phenyl methacrylate) (PPhMA) (55% rr) and poly(1‐naphthyl methacrylate) (P‐1‐NM) (47% rr) were the same as those of the polymers prepared in toluene solutions. The weight average molecular weights were 1 × 10⁶ and 5 × 10⁵ g/mol for PPhMA and P‐1‐NM prepared in microemulsions with very broad distributions. PPhMA samples from microemulsions and solution had the same T_g = 127 °C. P‐1‐NM from microemulsions had T_g = 145–147 °C compared with T_g = 142 °C for P‐1‐NM from solution. The molecular weights and the glass‐transition temperatures of both PPhMA and P‐1‐NM from microemulsions are substantially higher than any previously reported. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 519–524, 2001     

Stereoregular control of poly(4‐vinyl pyridine) on free radical polymerization by using the inclusion complex with randomly methylated β‐cyclodextrin

Highly heterotactic poly(4‐vinyl pyridine)s (P4VPs) with the fraction of mr content (f_mr) > 0.81 were synthesized by free radical polymerization of 4‐vinyl pyridine (4VP) with randomly methylated β‐cyclodextrin (β‐RMCD) in acidic aqueous media of HNO₃ and CF₃COOH at 40 °C. The heterotacticity of P4VP strongly depended on the neutralization of 4VP. The complete neutralization of 4VP with HNO₃ or CF₃COOH increased the heterotacticity of P4VP, whereas atactic P4VP was obtained in water. The partial decomposition of β‐RMCD by HCl reduced the heterotacticity of P4VP (f_mr ≈ 0.74). The structures of inclusion complexed monomers were determined by Job's plot, 2D NMR with nuclear Overhauser enhancement spectroscopy analyses, and simulation by MM2. The 1:2 complex with [β‐RMCD]:[4VP] with meso placement of 4VPs in β‐RMCD was formed when 4VP was completely neutralized with acid, whereas the 1:1 complex was formed in water. The mechanism of heterospecific control by using β‐RMCD was proposed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of P4VP-g-PSt Copolymer Microspheres with Controllable Size by Atom Transfer Radical Polymerization Synthesized Poly(4-vinylpyridine) Macromonomer

Poly(4‐vinylpyridine) macromonomer (St‐P4VP) with a styryl end group was synthesized by atom transfer radical polymerization (ATRP) of 4‐vinylpyridine using p‐(chloromethyl)styrene (CMSt) as functional initiator, CuCl as catalyst and tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as ligand in 2‐propanol. The structure of St‐P4VP macromonomer was identified by proton nuclear magnetic resonance (¹H NMR). The result of gel permeation chromatography (GPC) illustrated that the number‐average molecular weight of St‐P4VP could be controlled by adjusting polymerization conditions. Poly(4‐vinylpyridine) grafted polystyrene microspheres (P4VP‐g‐PSt) were then prepared by dispersion copolymerization of styrene with St‐P4VP macromonomers. The effects of polymerization reaction parameters such as medium polarity, concentration of St‐P4VP macromonomer and polymerization temperature on the sizes and size distribution of P4VP‐g‐PSt microspheres were investigated. The results of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser light scattering (LLS) indicated that mono‐dispersed P4VP‐g‐PSt microspheres with average diameters of 100–200 nm could be obtained when the molar ratio of St to St‐P4VP was 0.25:100 in ethanol/water mixed solvents (V/V=80:20) at 60°C. Such kind of graft copolymer microspheres was expected to be applied to many fields such as drug delivery system and protein adsorption/separation system due to their particular structure.     

Synthesis and NMR characterization of 6‐Phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose

Cellulose ( 1 ) was converted for the first time to 6‐phenyl‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 6 ) in 33% overall yield. Intermediates in the five‐step conversion of 1 to­ 6 were: 6‐O‐tritylcellulose ( 2 ), 6‐O‐trityl‐2,3‐di‐O‐methylcellulose ( 3 ), 2,3‐di‐O‐methylcellulose ( 4 ); and 6‐bromo‐6‐deoxy‐2,3‐di‐O‐methylcellulose ( 5 ). Elemental and quantitative carbon‐13 analyses were concurrently used to verify and confirm the degrees of substitution in each new polymer. Gel permeation chromotography (GPC) data were generated to monitor the changes in molecular weight (DP_w) as the synthesis progressed, and the compound average decrease in cellulose DP_w was ～ 27%. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to characterize the decomposition of all polymers. The degradation temperatures ( °C) and percent char at 500 °C of cellulose derivatives 2 to 6 were 308.6 and 6.3%, 227.6 °C and 9.7%, 273.9 °C and 30.2%, 200.4 °C and 25.6%, and 207.2 °C and 27.0%, respectively. The glass transition temperature (T_g) of­6‐O‐tritylcellulose by dynamic mechanical analysis (DMA) occurred at 126.7 °C and the modulus (E′, Pa) dropped 8.9 fold in the transition from ?150 °C to + 180 °C (6.6 × 10⁹ to 7.4 × 10⁸ Pa). Modulus at 20 °C was 3.26 × 10⁹ Pa. Complete proton and carbon‐13 chemical shift assignments of the repeating unit of the title polymer were made by a combination of the HMQC and COSY NMR methods. Ultimate non‐destructive proof of carbon–carbon bond formation at C6 of the anhydroglucose moiety was established by generating correlations between resonances of CH₂6 (anhydroglucose) and C1′, H2′, and H6′ of the attached aryl ring using the heteronuclear multiple‐bond correlation (HMBC) method. In this study, we achieved three major objectives: (a) new methodologies for the chemical modification of cellulose were developed; (b) new cellulose derivatives were designed, prepared and characterized; (c) unequivocal structural proof for carbon–carbon bond formation with cellulose was derived non‐destructively by use of one‐ and two‐dimensional NMR methods. Copyright © 2002 John Wiley & Sons, Ltd.     

Structural isomer effects on the morphology of block copolymer/metal salts hybrids

The structural isomer effects on phase behavior of block copolymer/FeCl₃ hybrids were investigated by comparing structures of two series of blends based on polystyrene‐b‐poly(4‐vinylpyridine) (PS‐P4VP) and polystyrene‐b‐poly(2‐vinylpyridine) (PS‐P2VP), with the same molecular weight and the same composition. By conbining fourier transform infrared (FT‐IR) spectroscopy and differencial scaninng calorimetry, successful achievements of selective dispersion of FeCl₃ into poly(vinylpyridine) phase via coordination were verified. Complementary morphological observation by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), it has been clarified that phase behavior for two isomer series is considerably different. That is, neat PS‐P4VP formed thicker cylindrical domains than that of neat PS‐P2VP due to much stronger Flory‐Huggins interaction parameter χ, χ_PS‐P4VP » χ_PS‐P2VP. As for PS‐P2VP/FeCl₃ hybrids, morphological transition can be taken place at the smaller amount of metal salt; furthermore, P2VP blend series form lamellar structures with evidently larger periodic length at the same amount of metal salt. This is probably caused by the event that excess metal salt also contributes to lamellar expansion by localizing at the center of P2VP lamellar phase. Moreover, the saturation limit of introduced metal salt in P2VP was smaller than that in P4VP due to the steric hindrance for a lone pair electrons on nitrogen atoms directed to the main chain of P2VP. These results can be explained by the structural isomer effects on the conformation of the P2VP chains at coordinated state with FeCl₃, that is, P2VP chains prefer to form the intramolecular coordination due to the short range interaction so as to make themselves stiffer, whereas P4VP chains tend to adopt the long range interaction including intra‐ and intermolecular coordinations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 377–386     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Amphiphilic silica/fluoropolymer nanoparticles: Synthesis,tem‐responsive and surface properties as protein‐resistance coatings

A series of amphiphilic silica/fluoropolymer nanoparticles of SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) were prepared by silica surface‐initiating atom transfer radical polymerization (SI‐ATRP) of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and poly dodecafluoroheptyl methacrylate (P12FMA). Their amphiphilic behavior, lower critical solution temperature (LCST), and surface properties as protein‐resistance coatings were characterized. The introduction of hydrophobic P(12FMA) block leads SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) to form individual spherical nanoparticles (～150 nm in water and ～170 nm in THF solution) as P(PEGMA)‐b‐P(12FMA) shell grafted on SiO₂ core (～130 nm), to gain obvious lower LCST at 36–52 °C and higher thermostability at 290–320 °C than SiO₂‐g‐P(PEGMA) (LCST = 78–90 °C, T_d = 220 °C). The water‐casted SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) films obtain much rougher surface (125.3–178.4 nm) than THF‐casted films (11.5–16.9 nm) and all SiO₂‐g‐P(PEGMA) films (26.8–31.3 nm). Therefore, the water‐casted surfaces exhibit obvious higher water adsorption amount (Δf = ?494 ～ ?426 Hz) and harder adsorbed layer (viscoelasticity of ΔD/Δf = ?0.28 ～ ?0.36 × 10^?6/Hz) than SiO₂‐g‐P(PEGMA) films, but present loser adsorbed layer than THF‐casted films (ΔD/Δf = ?0.29 ～ ?0.63 × 10^?6/Hz). While, the introduction of P(12FMA) segments does not show obviously reduce in the protein‐repelling adsorption of SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) films (△f = ?15.7 ～ ?22.3 Hz) compared with SiO₂‐g‐P(PEGMA) films (△f = ?8.3 ～ ?11.3 Hz) and no obvious influence on water adsorption of ancient stone. Therefore, SiO₂‐g‐P(PEGMA)‐b‐P(12FMA) is suggested to be used as protein‐resistance coatings. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 381–393     

Synthesis of well‐defined PNIPAM‐b‐(PEA‐g‐P2VP) double hydrophilic graft copolymer via sequential SET‐LRP and ATRP and its “schizophrenic” Micellization behavior in aqueous media

A series of well‐defined double hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) backbone and poly(2‐vinylpyridine) side chains, were synthesized by successive single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was prepared by sequential SET‐LRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as the catalytic system. The obtained diblock copolymer was transformed into the macroinitiator by reacting with 2‐chloropropionyl chloride. Next, grafting‐from strategy was used for the synthesis of poly(N‐isopropylacrylamide)‐b‐[poly(ethyl acrylate)‐g‐poly(2‐vinylpyridine)] double hydrophilic graft copolymer. ATRP of 2‐vinylpyridine was initiated by the macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as the catalytic system. The synthesis of both the backbone and the side chains are controllable. Thermo‐ and pH‐responsive schizophrenic micellization behaviors were investigated by ¹H NMR, fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. Unimolecular micelles with PNIPAM‐core formed in acidic environment (pH = 2) with elevated temperature (T ≥ 32 °C), whereas the aggregates turned into spheres with PEA‐g‐P2VP‐core accompanied with the lifting of pH values (pH ≥ 5.3) at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 15–23, 2010     

Fluorescence,ion binding,and viscosity properties of poly[2‐ and 4‐vinylpyridine]s in methanol and in sulfuric acid

Fluorescence intensities of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) in H₂SO₄/H₂O solutions were increased with increasing acid concentration. The intensities for P2VP were found to be six times stronger than that of P4VP. These differences were accounted for by the microenvironment of protonated pyridinium group. The ion binding properties of 4‐methylpyridine (4MP), P2VP, and P4VP were investigated in methanol using Tb³⁺ as a fluorescence probe. The increase of fluorescence intensity of Tb³⁺ in [P2VP–Tb³⁺] and [P4VP–Tb³⁺] complexes is due to both the replacement of the inner coordinated methanol molecules and ligand‐to‐metal energy transfer. The model compound 4MP was inefficient from this point of view, and the results were attributed to the polymer cooperative effect. Reduced viscosities of poly(vinylpyridine)s (PVP) in methanol were similar to nonionic polymers; however, when TbCl₃ was added into the solution, the viscosities increased upon dilution. These results also indicated that PVP form complexes with Tb³⁺ in methanol. When diluted, the counterions Cl⁻ are allowed to dissociate and the charged polymer expands. Consequently, the solution's viscosity increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1341–1345, 1999     

Dimensional Control of Block Copolymer Nanofibers with a π‐Conjugated Core: Crystallization‐Driven Solution Self‐Assembly of Amphiphilic Poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine)

With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT₂₃‐b‐P2VP₁₁₅ (block ratio=1:5) and P3HT₄₄‐b‐P2VP₁₁₅ (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT₂₃‐b‐P2VP₁₁₅ resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT₂₃‐b‐P2VP₁₁₅ unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (L_w/L_n <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio.     

The physical and NMR characterizations of allyl‐ and crotylcelluloses

Tri‐O‐allylcellulose (degree of polymerization, DP ∼112) was prepared in ∼91% yield, and tri‐O‐crotylcellulose (DP ∼138) was prepared in ∼56% yield from microcrystalline cellulose (DP ∼172, and polydispersity index, PDI ∼1.95) using modified literature methods. Number‐average molecular weight (M_n = 31,600), weight‐average molecular weight (M_w = 191,800), and PDI = 6.07 data suggested that tri‐O‐allylcellulose may be crosslinking in air to generate branched chains. The polymer was stabilized with 100 ppm butylated hydroxy toluene (BHT). The material without BHT experienced glass transition (T_g, differential‐scanning calorimetry, DSC) between −2 and +3 °C, crosslinked beyond 100 °C, and degraded at 298.6 °C (by thermogravimetric analysis, TGA). M_n (45,100), M_w (118,200), PDI (2.62), and thermal data (T_g − 5 to +3 °C, melting point 185.8 °C, recrystallization 168.9 °C, and degradation 343.6 °C) on tri‐O‐crotylcellulose suggested that the polymer was formed with about the same polydispersity as the starting material and is heat stable. While allylcellulose generated continuous flexible yellow films by solution casting, crotylcellulose precipitated from solution as brittle white flakes. Dynamic mechanical analysis (DMA) data on allylcellulose films (T_g − 29.1 °C, Young's modulus 5.81 × 10⁸ Pa) suggest that the material is tough and flexible at room temperature. All ¹H and ¹³C resonances in the NMR spectra were identified and assigned using the following methods: Double‐quantum filter correlation spectroscopy (DQF COSY) was used to assign the network of seven protons in the anhydroglucose portion of the repeat unit. The proton assignments were verified and confirmed by total correlation spectroscopy (TOCSY). A combination of heteronuclear single‐quantum coherence (HSQC) and ¹³C spectroscopies were used to identify all bonded carbon–hydrogen pairs in the anhydroglucose portion of the repeat unit, and assign the carbon nuclei chemical shift values. Heteronuclear multiple bond correlation (HMBC) spectroscopy was used to connect the resonances of methines and methylenes at positions 2, 3, and 6 to the methylene resonances of the allyl ethers. TOCSY was used again to identify the fifteen ¹H resonances in the three pendant allyl groups. Finally, a combination of HSQC, HMBC, and ¹³C spectroscopies were used to identify each carbon in the allyl pendants at 2, 3, and 6. Because of line broadening and signal overlap, we were unable to identify the conformational arrangement about the C5 and C6 bond in tri‐O‐allyl‐ and tri‐O‐crotylcelluloses. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1889–1902, 2000