Pseudopolyrotaxanes of Cucurbit[6]uril: A Three‐Dimensional Network Self‐assembled by ClO4−(H2O)2 Water Clusters

A pseudorotaxane of cucurbit[6]uril (CB[6]) with guest molecule N,N′‐hexamethylenebis (pyrazinyl perchlorate) (BPHP) was synthesized and characterized by ¹H NMR spectra, IR, single crystal X‐ray diffraction analysis and thermogravimetric analysis. The structure of the pseudorotaxane (CB[6]·BPHP) is stabilized by host‐guest hydrogen bonds. Self‐assembly of the pseudorotaxane produces infinite one‐dimensional and two‐dimensional networks with intermolecular hydrogen bonds. In the molecular packing of the CB[6]·BPHP, ClO₄^?(H₂O)₂ water clusters serve as bridges to associate these pseudorotaxanes and form three‐dimensional networked pseudopolyrotaxane.     

Self‐assembled Monolayers of Alkylphosphonic Acids on Aluminum Oxide Surfaces – A Theoretical Study

Density‐functional based calculations were used to investigate self‐assembled monolayers of different alkylphosphonic acids on corundum α‐Al₂O₃ (0001), bayerite β‐Al(OH)₃ (001) and boehmite γ‐AlOOH (010) surface models. Mono‐, bi‐, and tridentate adsorption modes were considered. In addition, the organization of single adsorbed molecules was compared to the organization at full surface coverage. The height (thickness) of the self‐assembled monolayers is always shorter than the length of the phosphonic acid molecules due to tilting of the alkyl chains. Tilt angles at full surface coverage are very similar to the tilt angle of a single adsorbed molecule, which indicates that the density of the self‐assembled monolayers is limited by the density of adsorption sites. The lateral interactions between alkyl chains are evidenced by small torsions of the adsorbed molecules, which may serve to minimize the repulsion forces between interchain hydrogen atoms. Similar tilt angles were obtained for mono‐, bi‐, and tridentate adsorptions. Hence, the coordination mode cannot be characterized by the molecule tilting.     

Versatile Self‐Complexing Compounds Based on Covalently Linked Donor–Acceptor Cyclophanes

A range of covalently linked donor–acceptor compounds which contain 1) a hydroquinone (HQ) unit, 2) a 1,5‐dioxynaphthalene (DNP) ring system, or 3) a tetrathiafulvalene (TTF) unit as the π‐donor, and 4) cyclobis(paraquat‐p‐phenylene) (CBPQT⁴⁺) as the π‐accepting tetracationic cyclophane were prepared and shown to operate as simple molecular machines. The π‐donating arms can be included inside the cyclophane in an intramolecular fashion by virtue of stabilizing noncovalent bonding interactions. What amounts to self‐complexing/decomplexing equilibria were shown to be highly temperature dependent when the π‐donating arm contains either an HQ or DNP moiety. The thermodynamic parameters associated with the equilibria have been unraveled by using variable‐temperature ¹H NMR spectroscopy. The negative ΔH° and ΔS° values account for the fact that the “uncomplexed” conformation becomes the dominant species, since the entropy gain associated with the decomplexation process overcomes the enthalpy loss resulting from the breaking of the donor–acceptor interactions. The arm's in‐and‐out movements with respect to the linked cyclophanes can be arrested by installing a bulky substituent at the end of the arm. In the case of compounds carrying a DNP ring system in their side arm, two diastereoisomeric, self‐complexing conformations are observed below 272 K in hexadeuterioacetone. By contrast, control over the TTF‐containing arm's movement is more or less ineffective through the thermally sensitive equilibrium although it can be realized by chemical and electrochemical ways as a result of TTF's excellent redox properties. Such self‐complexing compounds could find applications as thermo‐ and electroswitches. In addition, the thermochromism associated with the arm's movement could lead to some of the compounds finding uses as imaging and sensing materials.     

Synthesis of Two‐Electron Bimetallic Cu–Ag and Cu–Au Clusters by using [Cu13(S2CNnBu2)6(C≡CPh)4]+ as a Template

Atomically precise Cu‐rich bimetallic superatom clusters have been synthesized by adopting a galvanic exchange strategy. [Cu@Cu₁₂(S₂CNⁿBu₂)₆(C≡CPh)₄][CuCl₂] ( 1 ) was used as a template to generate compositionally uniform clusters [M@Cu₁₂(S₂CNⁿBu₂)₆ (C≡CPh)₄][CuCl₂], where M=Ag ( 2 ), Au ( 3 ). Structures of 1 , 2 and 3 were determined by single crystal X‐ray diffraction and the results were supported by ESI‐MS. The anatomies of clusters 1 – 3 are very similar, with a centred cuboctahedral cationic core that is surrounded by six di‐butyldithiocarbamate (dtc) and four phenylacetylide ligands. The doped Ag and Au atoms were found to preferentially occupy the centre of the 13‐atom cuboctahedral core. Experimental and theoretical analyses of the synthesized clusters revealed that both Ag and Au doping result in significant changes in cluster stability, optical characteristics and enhancement in luminescence properties.     

Self‐Assembly in Water of Poly(acrylic acid)‐Based Diblock Copolymers Synthesized by Nitroxide‐Mediated Polymerization

Summary: Amphiphilic diblock copolymers consisting of a hydrophilic block, poly(acrylic acid), and a hydrophobic block, polystyrene, were synthesized by direct nitroxide‐mediated polymerization using the PS block as a macro‐initiator for the first time. Several techniques were used to characterize the amphiphilic block copolymers (size exclusion chromatography, NMR spectroscopy). The proposed method can lead to samples with a broad range of composition and molar mass. Preliminary studies of their self‐assembly in aqueous medium using fluorescence spectroscopy and small‐angle neutron scattering are presented.

Schematic of the formation of the PS‐b‐PAA block copolymers and their micellization in aqueous media.     

Synthesis of 6‐Aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles by the Cu‐Catalyzed Reaction of 2‐(2‐Bromophenyl)‐1H‐indoles with CH2(CN)2

A series of 6‐aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles 4 have been prepared by treatment of 2‐(2‐bromophenyl)‐1H‐indoles 1 , available from 1‐(2‐bromophenyl)ethanones or 1‐(2‐bromophenyl)propan‐1‐ones by using Fischer indole synthesis, with propanedinitrile in the presence of a catalytic amount of CuBr and an excess of K₂CO₃ in DMSO at 100°.     

Self‐Assembly of Poly(2‐alkyl‐2‐oxazoline)s by Crystallization in Ethanol–Water Mixtures Below the Upper Critical Solution Temperature

Crystallization of poly(2‐isobutyl‐2‐oxazoline) and poly(2‐nonyl‐2‐oxazoline) is found to occur by room temperature annealing below the upper critical solution temperature in ethanol–water solvent mixtures. Both polymers produce similar self‐assembled structures (see image), resembling the previously reported crystalline hierarchical structures obtained from hot aqueous poly(2‐isopropyl‐2‐oxazoline) solutions above the lower critical solution temperature. These observations suggest that the crystallization induced self‐assembly process is a rather general phenomenon occurring for semicrystalline polymers in liquid–liquid two phase systems.

     

Triazine‐Cored Lanthanide‐Based Metal–Organic Frameworks Featuring Unique Water Chains and Strong Characteristic Emissions

A new triazine‐cored tricarboxylic acid, N,N′,N“‐1,3,5‐triazine‐2,4,6‐triyltris(cis‐4‐aminocyclohexane‐carboxylic acid) (H₃L), has been prepared by replacing the chlorine atoms of cyanuric chloride with cis‐4‐aminocyclohexane‐carboxylic acid, which has been used for the construction of a series of triazine‐cored lanthanide‐based metal–organic frameworks (MOFs). All these MOFs were structurally authenticated, revealing that they are isostructural and exist as two‐dimensional (2D) coordination networks with the general formula [Ln(L)(H₂O)₂]?5.5 H₂O (Ln= 1?Gd , 2?Tb , 3?Eu ). A unique one‐dimensional water chain, composed of primary tetrameric cyclic rings and dodecameric cyclic rings, has been found entrapped in the lattice. Moreover, all these compounds display bright characteristic photoluminescence. Particularly, for 1 , apart from the strong blue emission peak (Φ_f=20.6 %) corresponding to the intraligand transition under near‐UV excitation, the characteristic emissions of Gd³⁺ cation (Φ_f=5.0 %) were unexpectedly observed upon excitation at 273 nm.     

A Rare Tetranuclear Thorium(IV) μ4‐Oxo Cluster and Dinuclear Thorium(IV) Complex Assembled by Carbon–Oxygen Bond Activation of 1,2‐Dimethoxyethane (DME)

The synthesis and X‐ray crystal structure of two new multinuclear thorium complexes are reported. The tetranuclear μ₄‐oxo cluster complex Th₄(μ₄‐O)(μ‐Cl)₂I₆[κ²(O,O’)‐μ‐O(CH₂)₂OCH₃]₆ and the dinuclear complex Th₂I₅[κ²(O,O’)‐μ‐O(CH₂)₂OCH₃]₃(DME) (DME=dimethoxyethane) are formed by C?O bond activation of 1,2‐dimethoxyethane (DME) mediated by thorium iodide complexes.     

Asymmetric Synthesis of trans‐β‐Lactams by a Kinugasa Reaction on Water

The asymmetric Kinugasa reaction was performed on pure water for the first time without the need for any organic co‐solvents. In contrast to most asymmetric Kinugasa reactions, trans‐β‐lactams were obtained as the major products in good yields, enantioselectivities, and diastereoselectivities (up to 90 % yield, 98 % ee, and >99:1 d.r.). This reaction is atom‐economical, environmentally friendly, and affords synthetically useful but challenging products.     

Selective Propene Epoxidation on Immobilized Au6–10 Clusters: The Effect of Hydrogen and Water on Activity and Selectivity

Epoxidation made easy : Subnanometer gold clusters immobilized on amorphous alumina result in a highly active and selective catalyst for propene epoxidation. The highest selectivity is found for gas mixtures involving oxygen and water, thus avoiding the use of hydrogen. Ab initio DFT calculations are used to identify key reaction intermediates and reaction pathways. The results confirm the high catalyst activity owing to the formation of propene oxide metallacycles. Al green, Au yellow, O red, and C gray.

     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

pH Dependent Synthesis of Two Manganese Compounds based on 5‐(2‐Pyrimidyl)tetrazole‐1‐acetic Acid

Reactions of Hpymtza [Hpymtza = 5‐(2‐pyrimidyl)tetrazole‐1‐acetic acid] with MnCl₂ · 4H₂O under different pH conditions, afforded the complexes [Mn(pymtza)₂(H₂O)₄] ( 1 ) and [Mn₂(pymtza)₂Cl₂(EtOH)] · H₂O ( 2 ). The compounds were structurally characterized by elemental analysis, IR spectroscopy and single‐crystal X‐ray diffraction. Compound 1 shows a mononuclear structure, whereas complex 2 has a 1D chain structure. In compound 1 , the pymtza ligand only acts in a monodentate manner to coordinate to one central Mn^II atom by one carboxylate atom, In 2 , pymtza acts as tetradentate ligand to connect three Mn^II ions. Compounds 1 and 2 display 3D networks by hydrogen bonding interactions. Furthermore, the luminescence properties of Hpymtza as well as compounds 1 and 2 were investigated at room temperature in the solid state.     

Enhanced sulfur‐resistant methanation performance over MoO3–ZrO2 catalyst prepared by solution combustion method

Sulfur‐resistant methanation of syngas was studied over MoO₃–ZrO₂ catalysts at 400°C. The MoO₃–ZrO₂ solid‐solution catalysts were prepared using the solution combustion method by varying MoO₃ content and temperature. The 15MoO₃–ZrO₂ catalyst achieved the highest methanation performance with CO conversion up to 80% at 400°C. The structure of ZrO₂ and dispersed MoO₃ species was characterized using X‐ray diffraction and transmission electron microscopy. The energy‐dispersive spectrum of the 15MoO₃–ZrO₂ catalyst showed that the solution combustion method gave well‐dispersed MoO₃ particles on the surface of ZrO₂. The structure of the catalysts depends on the Mo surface density. It was observed that in the 15MoO₃–ZrO₂ catalyst the Mo surface density of 4.2 Mo atoms nm^?2 approaches the theoretical monolayer capacity of 5 Mo atoms nm^?2. The addition of a small amount of MoO₃ to ZrO₂ led to higher tetragonal content of ZrO₂ along with a reduction of particle size. This leads to an efficient catalyst for the low‐temperature CO methanation process.     

An Illumination‐Assisted Flexible Self‐Powered Energy System Based on a Li–O2 Battery

The flexible Li‐O₂ battery is suitable to satisfy the requirements of a self‐powered energy system, thanks to environmental friendliness, low cost, and high theoretical energy density. Herein, a flexible porous bifunctional electrode with both electrocatalytic and photocatalytic activity was synthesized and introduced as a cathode to assemble a high‐performance Li‐O₂ battery that achieved an overpotential of 0.19 V by charging with the aid of solar energy. As a proof‐of‐concept application, a flexible Li‐O₂ battery was constructed and integrated with a solar cell via a scalable encapsulate method to fabricate a flexible self‐powered energy system with excellent flexibility and mechanical stability. Moreover, by exploring the evolution of the electrode morphology and discharge products (Li₂O₂), the charging process of the Li‐O₂ battery powered by solar energy and solar cell was demonstrated.     

Syntheses and Characterization of Three New Compounds Based on Terephthalate and 2‐(2‐Pyridin‐4‐yl‐vinyl)benzimidazole Ligands

Three new compounds based on H₂BDC and PyBImE [H₂BDC = 1,4‐benzenedicarboxylatic acid, PyBImE = 2‐(2‐pyridin‐4‐yl‐vinyl)benzimidazole], namely, [Co(PyBImE)(BDC)(H₂O)₂] ( 1 ), [Co(PyBImE)₂(HBDC)(BDC)_0.5] ( 2 ), and [(HPyBImE)⁺ · (BDC)²–_0.5 · (H₂BDC)_0.5] ( 3 ), were synthesized by hydrothermal methods and characterized by single‐crystal X‐ray diffraction. Compound 1 is a one‐dimensional chain bridged by terephthalate in a bis(monodentate) fashion. In the complex the nitrogen atom from N_BIm and the coordination water molecule complete the coordination sphere. In complex 2 , the dinuclear cobalt units are bridged by terephthalate in a bis(bidentate) fashion into a one‐dimensional chain, but different from complex 1 , the nitrogen atom from N_Py and the oxygen atom from hydrogenterephthalate complete the coordination sphere. Complex 3 is a co‐crystal with PyBImE and H₂BDC in a 1:1 ratio and the transfer of hydrogen atoms leads the complex into a salt. Interesting supramolecular structures are shown due to the hydrogen bonding as well as π ··· π interactions in the three complexes. Thermal and magnetic properties of 1 and 2 were also studied.