Intranasal administration of human fibroblast interferon in mice, rats, rabbits and dogs

In previous studies on the nasal administration of human fibroblast interferon (HuIFN-beta), only rabbits have been used. Therefore, this route was investigated in mice, rats, rabbits and dogs. HuIFN-beta could be delivered across the nasal mucosa in mice, rats, rabbits and dogs, when it was mixed with sodium glycocholate as an absorption promoter. However, the pattern of the plasma HuIFN-beta concentration-time curve was different from that in rabbits. Rabbits gave the highest value of the maximum plasma HuIFN-beta concentration (Cmax), but plasma HuIFN-beta declined rapidly thereafter, upon nasal administration of the powder dosage form (8.45 x 10(2) IU/g). In rats and dogs, Cmax was lower than in rabbits, but plasma HuIFN-beta declined slowly after nasal administration of the powder or liquid dosage form (4-6 x 10(2) IU/g). These differences might be attributed to differences of absorption rate constant.     

Development of a stability-indicating high performance liquid chromatography method for assay of erythromycin ethylsuccinate in powder for oral suspension dosage form

In this study an effective method was developed to assay erythromycin ethylsuccinate for an oral suspension dosage form. The chromatographic separation was achieved on an X-Terra™ C₁₈ analytical column. A mixture of acetonitrile–ammonium dihydrogen phosphate buffer (0.025 mol L^-1) (60:40, V/V) (pH 7.0) was used as the mobile phase, effluent flow rate monitored at 1.0 mL min⁻¹, and UV detection at 205 nm. In forced degradation studies, the effects of acid, base, oxidation, UV light and temperature were investigated showing no interference in the peak of drug. The proposed method was validated in terms of specificity, linearity, robustness, precision and accuracy. The method was linear at concentrations ranging from 400 to 600 μg mL⁻¹, precise (intra- and inter-day relative standard deviations <0.65), accurate (mean recovery; 99.5%). The impurities and degradation products of erythromycin ethylsuccinate were selectively determined with good resolution in both the raw material and the final suspension forms. The method could be useful for both routine analytical and quality control assays of erythromycin ethylsuccinate in commercial powder for an oral suspension dosage form and it could be a very powerful tool to investigate the chemical stability of erythromycin ethylsuccinate.     

Preparation and evaluation of oral dosage form using acylglycerols. II. Effect of food ingestion on dissolution and absorption of aspirin from the granules prepared by acylglycerols in human subjects.

The dissolution behavior of the aspirin enteric granule prepared using acylglycerols, glyceryl monostearate (GMS) and glyceryl trilaurate (GTL), was investigated in vitro and in human subjects in a fasting or non-fasting state. Aspirin was slowly released from the granule in vitro at pH 1.2. No acceleration of the aspirin dissolution rate in the medium without lipase and cholic acid was observed when the pH level of the medium increased to a neutral region (pH 6.4). However, the dissolution of aspirin was significantly increased by increasing the concentrations of lipase and cholic acid in the medium. Lipase appears to play an essential role in the dissolution process of aspirin granules. In human subjects, the average levels of the cumulative amount of total salicylate excreted in a urine-time curve, and the mean residence time (MRT) obtained after oral administration of a granule in the fasting state were markedly delayed in comparison with the results observed using an aqueous solution and a crystalline form of aspirin. In comparing the fasting condition with the non-fasting condition (after food ingestion), no significant difference was recognized in the total amount of salicylate excreted in urine to an infinite time (Ae(infinity)), whether the MRT was obtained by granule, crystalline form or aqueous solution. It can be concluded that aspirin granule prepared by GMS and GTL has a property of pancreatic lipase-sensitive dissolution, and its bioavailability is unaffected by food intake.     

Stability indicating HPTLC determination of clopidogrel bisulphate as bulk drug and in pharmaceutical dosage form

A sensitive, selective, precise and stability indicating high-performance thin layer chromatographic method of analysis of clopidogrel bisulphate both as a bulk drug and in formulations was developed and validated in pharmaceutical dosage form. The method employed TLC aluminium plates precoated with silica gel 60F-254 as the stationary phase. The solvent system consisted of carbon tetrachloride-chloroform-acetone (6:4:0.15, v/v/v). This system was found to give compact spots for clopidogrel bisulphate (R_f value of 0.30±0.01). Clopidogrel bisulphate was subjected to acid and alkali hydrolysis, oxidation, photodegradation and dry heat treatment. Also the degraded products were well separated from the pure drug. Densitometric analysis of clopidogrel bisulphate was carried out in the absorbance mode at 230 nm. The linear regression data for the calibration plots showed good linear relationship with r²=0.999±0.001 in the concentration range of 200-1000 ng. The mean value of correlation coefficient, slope and intercept were 0.999±0.001, 0.093±0.011 and 8.83±0.99, respectively. The method was validated for precision, accuracy, ruggedness and recovery. The limits of detection and quantitation were 40 and 120 ng per spot, respectively. The drug undergoes degradation under acidic and basic conditions, oxidation and dry heat treatment. All the peaks of degraded product were resolved from the standard drug with significantly different R_f values. This indicates that the drug is susceptible to acid-base hydrolysis, oxidation and dry heat degradation. Statistical analysis proves that the method is reproducible and selective for the estimation of the said drug. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one.     

Electrochemical synthesis of polypyrrole in powder form

Journal of Solid State Electrochemistry - Novel approach to synthesis of conjugated oligomers/polymers is proposed. This approach combines all advantages of electrochemical methods: variation of...     

Optimization and validation of an RP-HPLC method for direct determination of metformin hydrochloride in human urine and in a dosage form

A simple, selective, sensitive, accurate, and precise method was developed for determination of metformin hydrochloride (MF) in human urine using RP-HPLC. The method depends upon using an octylsilyl (C8) 5 microm particle size column at ambient temperature with mobile phase consisting of 33 mM sodium dihydrogen phosphate containing 6.38 mM hexanesulfonic acid sodium salt and adjusted to apparent pH 3.0 with phosphoric acid-acetonitrile (93 + 7, v/v) at a flow rate of 1.5 mL/min. Quantitation was achieved with UV detection at 231 nm based on peak area with a linear calibration curve over the concentration range of 0.01-50 microg/mL. The proposed method was applied to the determination of the urinary excretion pattern of MF (the cumulative amounts excreted were calculated without pretreatment of the urine sample) and for determination of the dissolution pattern of MF tablets. The proposed method was completely validated according to the U.S. Food and Drug Administration guidelines.     

Validation of a capillary electrophoresis method for analysis of rabeprazole sodium in a pharmaceutical dosage form

Rabeprazole sodium is an antisecretory agent that inhibits the enzyme H+/K+ ATPase present in the stomach parietal cells. There are few data about its quantitative determinations in laboratorial routines. Capillary electrophoresis is a method being used increasingly for analysis of pharmaceutical compounds, the main advantages of which are the simplicity of instrumentation, low consumption of sample and reagents, and fast analysis. The aim of this study was to develop and validate a capillary electrophoresis method for determination of rabeprazole sodium in coated tablets. The conditions used were a bare fused silica capillary with 48.0 cm length (39.5 cm effective) and 75 microm id; a 10mM, pH 9.0, sodium tetraborate run buffer; a diode array detector set at 291 nm; hydrodynamic injection (50 mbar/5 s); and a voltage of 20 kV. HP Chemstation CE rev. A.06.03 software was used for system control, data acquisition, and analysis. The method was demonstrated to be linear in the concentration range of 5.0-40.0 microg/mL (r = 0.9993), precise (interday relative standard deviation = 0.49), accurate (mean recovery = 103.1%), and specific. The limits of detection and quantitation were 1.29 and 3.91 microg/mL, respectively.     

HPTLC method for determination of nevirapine in pharmaceutical dosage form

A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of nevirapine both as a bulk drug and in formulations was developed and validated. The solvent system consisted of toluene-carbon tetrachloride-methanol-acetone-ammonia (3.5:3.5:2.0:1.0:0.05, v/v/v/v/v). Densitometric analysis of nevirapine was carried out in the absorbance mode at 289nm. This system was found to give compact spots for nevirapine (R(f) value of 0.44+/-0.02). Nevirapine was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment and photodegradation. The drug undergoes degradation under acidic, basic conditions and oxidation. Also the degraded products were well resolved from the pure drug with significantly different R(f) values. Linearity was found to be in the range of 30-1000ng/spot with significantly high value of correlation coefficient. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.998+/-0.002 in the working concentration range of 300ng/spot to 1000ng/spot. The mean value of slope and intercept were 0.073+/-0.005 and 36.78+/-1.50, respectively. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 5 and 10ng/spot, respectively. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid degradation process. Arrhenius plot was constructed and activation energy was calculated.