Site-specific dense immobilization of antibody fragments on polymer brushes supported by silicone nanofilaments

For site-specific dense immobilization of antibodies on a solid support, we prepared phosphorylcholine copolymer brushes on silicone nanofilaments. The nanofilaments were prepared on a silicon wafer by treatment with trichloromethylsilane (MeSiCl 3). To generate Si-OH groups on the nanofilaments, O 2 plasma was irradiated on the surface. Initiators for atom transfer radical polymerization (ATRP) were then coupled on the filaments. Phosphorylcholine copolymer brushes were prepared by a "grafting from" process, and pyridyl disulfide groups were introduced into the polymer chains. F(ab') fragments were then specifically immobilized onto these surfaces via a thiol-disulfide interchange reaction. The amount of antibodies immobilized on the nanofilament-supported copolymer brushes was approximately 65 times greater than that on smooth wafer-supported copolymer brushes.     

Controlled grafting of well-defined epoxide polymers on hydrogen-terminated silicon substrates by surface-initiated ATRP at ambient temperature

Controlled grafting of well-defined epoxide polymer brushes on the hydrogen-terminated Si(100) substrates (Si-H substrates) was carried out via the surface-initiated atom-transfer radical polymerization (ATRP) at room temperature. Thus, glycidyl methacrylate (GMA) polymer brushes were prepared by ATRP from the alpha-bromoester functionalized Si-H surface. Kinetic studies revealed a linear increase in GMA polymer (PGMA) film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The graft polymerization proceeded more rapidly in the dimethylformamide/water (DMF/H(2)O) mixed solvent medium than in DMF, leading to much thicker PGMA growth on the silicon surface in the former medium. The chemical composition of the GMA graft-polymerized silicon (Si-g-PGMA) surfaces were characterized by X-ray photoelectron spectroscopy (XPS). The fact that the epoxide functional groups of the grafted PGMA were preserved quantitatively was revealed in the reaction with ethylenediamine. The "living" character of the PGMA chain end was further ascertained by the subsequent growth of a poly(pentafluorostyrene) (PFS) block from the Si-g-PGMA surface, using the PGMA brushes as the macroinitiators.     

Oriented Antibody Immobilization and Immunoassay Based on Boronic Acid-containing Polymer Brush

High sensitive immunoassay platforms have gained intense attention due to their vital roles in early-stage disease diagnosis and therapeutic information feedback.Although random covalent-binding of antibody has been widely adopted in immunoassays due to its simplicity and effectiveness,it readily loses its activity and fails to exhibit high antigen-binding capacity.In this work,copolymer of zwitterionic sulfobetaine methacrylate (SBMA) and glycidyl methacrylate (GMA) brushes were immobilized onto inert polypropylene (PP) via surface-initiated atom transfer radical polymerization (ATRP) based on biomimetic dopamine pretreatment.Subsequently,boronic acid (BA) groups were covalently bonded via active GMA units,followed by the introduction of oriented immobilization of antibody.Owing to the oriented immobilization of antibody facilitated by BA groups in polymer brush,the bioactivity of antibody is well preserved,which endows the surface with significantly enhanced antigen-binding capacity.Moreover,the existence of SBMA segments in polymer brushes renders the surface high resistance to nonspecific protein adsorption,significantly alleviating the signal interference of antigen recognition.This strategy could find potential applications in developing high sensitive immunoassay platforms based on the different substrates.     

Polymer brushes in nanopores surrounded by silicon-supported tris(trimethylsiloxy)silyl monolayers

A chemically grafted tris(trimethylsiloxy)silyl (tris(TMS)) monolayer on a silicon oxide substrate was used as a template for creating nanoclusters of polymer brushes. Polymer brushes were synthesized by surface-initiated polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and tert-butyl methacrylate (t-BMA) via atom transfer radical polymerization (ATRP) from alpha-bromoester groups tethered to the residual silanol groups on the silicon surface after generating a range of tris(TMS) coverage. CuBr/bpy and CuBr/PMDETA were used as the catalytic system for PMPC and Pt-BMA synthesis, respectively. The percentage of tris(TMS) coverage significantly influenced the thickness and morphology of the polymer brushes. Protrusions representing self-aggregation of PMPC brushes in nanopores as visualized by AFM analysis evidently suggested that PMPC brushes were distributed nanoscopically on the surface. The protrusion size and surface roughness corresponded quite well with the graft density of PMPC brushes. The fact that Pt-BMA brushes grown from nanopores were almost featureless implies that self-aggregation of PMPC brushes is truly a consequence of phase incompatibility between hydrophilic PMPC brushes and hydrophobic tris(TMS). The anti-fouling characteristic of PMPC brushes, inferred from plasma protein adsorption, was subsequently varied by controlling the surface coverage ratio between PMPC brushes and tris(TMS).     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.     

Surface-initiated Atom-transfer Radical Polymerization from Polyimide Films and Their Anti-fouling Properties

A simple one-step method for the chloromethylation of polyimide (PI) under mild conditions was used to introduce benzyl chloride groups into PI film surface. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol) monomethacrylate (PEGMA) and glycidyl methacrylate (GMA) were prepared via surface initiated atom-transfer radical polymerization (ATRP) from the chloromethylated PI surfaces using benzyl chloride groups as the active ATRP initiators. A kinetics study indicated that the chain growth from the films was in agreement with a controlled process. The dormant chain ends of the grafted polymer on the PI films could reinitiate the consecutive surface-initiated ATRP to prepare surface-functionalized diblock copolymer brushes on the PI films. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS) after each modification stage. Protein adsorption experiments indicated that the PI-P(PEGMA) membrane exhibited substantially improved anti-fouling properties compared to the pristine PI surface.     

Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization

Surface-grafted styrene-based homopolymer and diblock copolymer brushes bearing semifluorinated alkyl side groups were synthesized by nitroxide-mediated controlled radical polymerization on planar silicon oxide surfaces. The polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS), and time-dependent water contact angle measurements. Angle-resolved XPS studies and water contact angle measurements showed that, in the case of the diblock copolymer brushes, the second block to be added was always exposed at the polymer-air interface regardless of its surface energy. Values of z*/Rg were estimated based on the radius of gyration, Rg, of the grafted homopolymer or block copolymer chains for the grafted brushes and thickness of the brush, z*. The fact that z*/Rg > 1 suggests that all these brushes are stretched. These results support the idea that after grafting the first block onto the surface the nitroxide-end capped polymer chains were able to polymerize the second block in a "living" fashion and the stretched brush so formed was dense enough that the outermost block in all cases completely covers the surface. NEXAFS analysis showed a relationship between the surface orientation of the fluorinated side chains and brush thickness with thicker brushes having more oriented side chains. Time-dependent water contact angle measurements revealed that the orientation of the side chains of the brush improved the surface stability toward reconstruction upon prolonged exposure to water.     

Theoretical and experimental studies on the surface structures of conjugated rod-coil block copolymer brushes

A combined theoretical and experimental investigation of conjugated rod-coil block copolymer brushes is reported. The theoretical study for the surface structures of rod-coil block copolymer brushes was established based on the simulation method of dissipative particle dynamics. The effects of solvent stimuli, grafting density, and rod-coil block ratio of the polymer brushes on the surface structures were examined. The rod blocks of polymer brushes were found to be well-dispersed on the surface in their good solvents. On the other hand, aggregative domains of the rod blocks were formed in their poor solvents with the conformations of isolated islands or worm-like structures depending on the grafting density of the polymer brushes. The aggregative domains tend to stay on top of the coil blocks for small rod-to-coil block ratio. However, the submergence of the aggregative domains into the coil blocks is thermodynamically preferred for large enough rod-to-coil block ratio. New multifunctional amphiphilic rod-coil block copolymers, poly-[2,7-(9,9-di-n-hexylfluorene)]-block-poly-[poly(ethylene glycol) methyl ether methacrylate]-block-poly-[3(tripropoxysilyl)propyl methacrylate] (PF-b-PPEGMA-b-PPOPS), with two different block ratios were synthesized and used to prepare the corresponding polymer brushes via the grafting- method. The effects of stimuli factors on the surface structures characterized by the atomic force microscopy images were consistent with the theoretical results. Furthermore, the photophysical properties of PF-b-PPEGMA-b-PPOPS brushes were significantly varied by the solvent stimuli. The emission peaks originated from the aggregation and/or excimer formation of PF blocks were observed after methanol treatment. The photoluminescence intensity and its efficiency were well correlated to the surface structure and the methanol content in mixed solvents. Our study demonstrates how the surface structures and photophysical properties of rod-coil block copolymer brushes response to environmental stimuli.     

Bioconjugation of protein-repellent zwitterionic polymer brushes grafted from silicon nitride

A new method for attaching antibodies to protein-repellent zwitterionic polymer brushes aimed at recognizing microorganisms while preventing the nonspecific adsorption of proteins is presented. The poly(sulfobetaine methacrylate) (SBMA) brushes were grafted from α-bromo isobutyryl initiator-functionalized silicon nitride (Si(x)N(4), x ≥ 3) surfaces via controlled atom-transfer radical polymerization (ATRP). A trifunctional tris(2-aminoethyl)amine linker was reacted with the terminal alkylbromide of polySBMA chains. N-Hydroxysuccinimide (NHS) functionalization was achieved by reacting the resultant amine-terminated polySBMA brush with bifunctional suberic acid bis(N-hydroxysuccinimide ester). Anti-Salmonella antibodies were subsequently immobilized onto polySBMA-grafted Si(x)N(4) surfaces through these NHS linkers. The protein-repellent properties of the polySBMA-grafted surface after antibody attachment were evaluated by exposing the surfaces to Alexa Fluor 488-labeled fibrinogen (FIB) solution (0.1 g·L(-1)) for 1 h at room temperature. Confocal laser scanning microscopy (CLSM) images revealed the minimal adsorption of FIB onto the antibody-coated polySBMA in comparison with that of antibody-coated epoxide monolayers and also bare Si(x)N(4) surfaces. Subsequently, the interaction of antibodies immobilized onto polySBMA with SYTO9-stained Salmonella solution without using blocking solution was examined by CLSM. The fluorescent images showed that antibody-coated polySBMA efficiently captured Salmonella with only low background noise as compared to antibody-coated monolayers lacking the polymer brush. Finally, the antibody-coated polySBMA surfaces were exposed to a mixture of Alexa Fluor 647-labeled FIB and Salmonella without the prior use of a blocking solution to evaluate the ability of the surfaces to capture bacteria while simultaneously repelling proteins. The fluorescent images showed the capture of Salmonella with no adsorption of FIB as compared to antibody-coated epoxide surfaces, demonstrating the potential of the zwitterionic layer in preventing the nonspecific adsorption of the proteins during the detection of bacteria in complex matrices.     

Dimensions of a free linear polymer and polymer immobilized on silica nanoparticles of a zwitterionic polymer in aqueous solutions with various ionic strengths

The dimensions and intermolecular interactions of a surface-grafted and unbound free polyampholyte, poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC), were estimated in aqueous solutions with various ionic strengths. Free linear PMPC was synthesized by atom-transfer radical polymerization (ATRP), and static light scattering (SLS) and dynamic light scattering (DLS) were carried out for the PMPC solutions with various concentrations of NaCl, c s. The hydrodynamic radius R H and the second virial coefficient A 2 of PMPC were independent of c s (0-0.5 M), though both R H and A 2 of polyampholytes usually strongly depend on the ionic strength. PMPC-immobilized silica nanoparticles (PMPC-SiNP) were also synthesized by surface-initiated ATRP, and DLS was carried out as for the solutions of linear PMPC to investigate the dependence of the dimensions of PMPC immobilized on a solid surface on the ionic strength. The molecular weight and surface density of PMPC immobilized on SiNP were estimated from the results obtained by GPC, NMR, and thermogravimetric analysis. The independence of R H of PMPC-SiNP was also observed, but its magnitude was larger than that of linear PMPC, although the molecular weight of PMPC immobilized on SiNP was smaller than that of linear PMPC. The larger dimension of PMPC immobilized on SiNP was explained by the excluded volume effect between the immobilized polymer chains.     

能够促进细胞黏附的生物活性表面的制备

报道了一种能够促进细胞黏附的生物活性表面的制备方法.首先通过表面引发原子转移自由基聚合方法在硅表面接枝了聚(N-甲基丙烯酰氧基琥珀酰亚胺)(PNMASI)聚合物刷.随着反应时间的增加,接枝层厚度基本呈线性增长,表明聚合反应具有一定的可控性.蛋白质吸附测试表明PNMASI改性后的表面具有高密度固定生物分子的能力.同时,通...     

Stimuli‐responsive diblock copolymer brushes via combination of “click chemistry” and living radical polymerization

pH‐ and temperature‐responsive poly(N‐isopropylacrylamide‐block?4‐vinylbenzoic acid) (poly(NIPAAm‐b‐VBA)) diblock copolymer brushes on silicon wafers have been successfully prepared by combining click reaction, single‐electron transfer‐living radical polymerization (SET‐LRP), and reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. Azide‐terminated poly(NIPAAm) brushes were obtained by SET‐LRP followed by reaction with sodium azide. A click reaction was utilized to exchange the azide end group of a poly(NIPAAm) brushes to form a surface‐immobilized macro‐RAFT agent, which was successfully chain extended via RAFT polymerization to produce poly(NIPAAm‐b‐VBA) brushes. The addition of sacrificial initiator and/or chain‐transfer agent permitted the formation of well‐defined diblock copolymer brushes and free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. Ellipsometry, contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy were used to characterize the immobilization of initiator on the silicon wafer, poly(NIPAAm) brush formation via SET‐LRP, click reaction, and poly(NIPAAm‐b‐VBA) brush formation via RAFT polymerization. The poly(NIPAAm‐b‐VBA) brushes demonstrate stimuli‐responsive behavior with respect to pH and temperature. The swollen brush thickness of poly(NIPAAm‐b‐VBA) brush increases with increasing pH, and decreases with increasing temperature. These results can provide guidance for the design of smart materials based on copolymer brushes. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2677–2685     

Grafting acrylic polymers from flat nickel and copper surfaces by surface-initiated atom transfer radical polymerization

Acrylic polymers, including poly(methyl methacrylate), poly(2,2,2-trifluoroethyl methacrylate), poly( N,N'-dimethyaminoethyl methacrylate), and poly(2-hydroxyethyl methacrylate) were grafted from flat nickel and copper surfaces through surface-initiated atom transfer radical polymerization (ATRP). For the nickel system, there was a linear relationship between polymer layer thickness and monomer conversion or molecular weight of "free" polymers. The thickness of the polymer brush films was greater than 80 nm after 6 h of reaction time. The grafting density was estimated to be 0.40 chains/nm2. The "living" chain ends of grafted polymers were still active and initiated the growth of a second block of polymer. Block copolymer brushes with different block sequences were successfully prepared. The experimental surface chemical compositions as measured by X-ray photoelectron spectroscopy agreed very well with their theoretical values. Water contact angle measurements further confirmed the successful grafting of polymers from nickel and copper surfaces. The surface morphologies of all samples were studied by atomic force microscopy. This study provided a novel approach to prepare stable functional polymer coatings on reactive metal surfaces.     

Formation of antifouling functional coating from deposition of a zwitterionic-co-nonionic polymer via “grafting to” approach

We develop a new process for the preparation of synergistic antifouling functional coatings on gold surfaces via a “grafting to” approach. The strategy includes a synthetic step of polymer brushes that consist of poly (ethylene glycol) (PEG) and zwitterionic side chains via a typical reversible-addition fragmentation chain transfer (RAFT) polymerization process, and a subsequent deposition of the polymer brushes onto a gold substrate. The presence of PEG and zwitterion chains on these polymer brush-coated gold surfaces has been proved to have a synergistic effect on the final antifouling property of the coating. PEG chains lower the electrostatic repulsion between zwitterionic polymer chains and increase their graft density on gold surfaces, while zwitterionic polymer effectively improves the antifouling property that is offered by PEG chains alone. Protein adsorption and cell attachment assays tests are conducted to confirm that this copolymer layer on gold surface has a pronounced resistance against proteins such as Bovine serum albumin and Lysozyme. Importantly, the antifouling property can be systematically adjusted by varying the molar ratio of PEG to zwitterionic chains in the final coating copolymer.     

Branched fluoropolymer-Si hybrids via surface-initiated ATRP of pentafluorostyrene on hydrogen-terminated Si(100) surfaces

Linear, branched, and arborescent fluoropolymer-Si hybrids were prepared via surface-initiated atom transfer radical polymerization (ATRP) from the 4-vinylbenzyl chloride (VBC) inimer and ClSO(3)H-modified VBC that were immobilized on hydrogen-terminated Si(100), or Si-H, surfaces. The simple approach of UV-induced coupling of VBC with the Si-H surface provided a stable, Si-C bonded monolayer of "monofunctional" ATRP initiators (the Si-VBC surface). The aromatic rings of the Si-VBC surface were then sulfonated by ClSO(3)H to introduce sulfonyl chloride (-SO(2)Cl) groups and to give rise to a monolayer of "bifunctional" ATRP initiators. Kinetics study indicated that the chain growth of poly(pentafluorostyrene) from the functionalized silicon surfaces was consistent with a "controlled" or "living" process. The chemical composition and functionality of the silicon surface were tailored by the well-defined linear and branched fluoropolymer brushes. Atomic force microscopy images revealed that the surface-initiated ATRP of pentafluorostyrene (PFS) had proceeded uniformly on the Si-VBC surface to give rise to a dense and molecularly flat surface coverage of the linear brushes. The uniformity of surfaces with branched brushes was controlled by varying the feed ratio of the monomer and inimer (VBC in the present case). The living chain ends on the functionalized silicon surfaces were used as the macroinitiators for the synthesis of diblock copolymer brushes, consisting of the PFS and methyl methacrylate polymer blocks.     

原子转移自由基聚合法制备新型亲水开管毛细管柱及在毛细管电色谱上的应用

为了增加开管毛细管柱(OTCC)的相比,提高分离效率,发展了表面引发原子转移自由基聚合法(SI-ATRP)制备葡萄糖聚合物修饰的开管毛细管柱。通过扫描电镜观察,该开管柱内壁上修饰了三维波浪状聚合物,明显增加了内壁比表面积和相比。在pH 3~11范围内,对含糖聚合物修饰的开管柱和空柱的电渗流进行了比较。修饰后开管柱的电渗流仅为空柱的1/2~1/3,且在pH 6~11范围内保持平稳。稳定的电渗流保证了分离的重复性和稳定性。用该开管毛细管柱成功实现了小分子混合物(苯丙氨酸、胸腺嘧啶、腺苷、鸟苷、5-溴尿嘧啶、水杨酸)以及蛋白质大分子(核糖核酸酶B、转铁蛋白和牛血清白蛋白)的有效分离,结果表明葡萄糖聚合物修饰的开管毛细管柱具有良好的重复性和稳定性。     

Synthesis of biocompatible poly[2-(methacryloyloxy)ethyl phosphorylcholine]-coated magnetite nanoparticles

A well-defined, double-hydrophilic diblock copolymer comprising poly[2-(methacryloyloxy)ethyl phosphorylcholine]-block-(glycerol monomethacrylate) (PMPC30-PGMA30, where the numbers represent the average degrees of polymerization for each block) was evaluated for the synthesis of colloidally stable ultrafine magnetite sols. Sterically stabilized paramagnetic sols were prepared in aqueous solution by chemical coprecipitation of ferric and ferrous salts in the presence of this block copolymer. The PMPC30-PGMA30-stabilized magnetite sol had a mean transmission electron microscopy (TEM) diameter of 9.4 +/- 1.7 nm and a mean hydrodynamic diameter of 34 nm. This sol exhibited improved colloidal stability with respect to long-term storage and pH variation compared with magnetite sols prepared in the presence of alternative water-soluble homopolymers and diblock copolymers. Fourier transform infrared (FT-IR) spectroscopy, thermogravimetry, electron spectroscopy imaging (ESI), and zeta potential studies indicate that the PMPC30-PGMA30 diblock copolymer was adsorbed onto the surface of the sol via the PGMA30 block, with the PMPC30 chains acting as the stabilizing block. Such sterically stabilized sols are expected to be improved contrast agents for magnetic resonance imaging (MRI) applications.     

Preparation of end-grafted polymer brushes by nitroxide-mediated free radical polymerization of vaporized vinyl monomers

In this work, we report a gas-phase polymerization approach to create end-grafted vinyl based polymer films on silicon oxide based substrates. The "surface-initiated vapor deposition polymerization" (SI-VDP) of vaporized vinyl monomers, via the nitroxide-mediated free radical polymerization mechanism, was developed to fabricate various homo- and block copolymer brushes from surface-bound initiators, 1-(4'-oxa-2'-phenyl-12'-trimethoxysilyldodecyloxy)-2,2,6,6-tetra-methylpiperidine ("TEMPO"). The resulting polymer thin films were characterized by the Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry, respectively, to identify the surface composition, film thickness, surface coverage, and water contact angles. Through the SI-VDP, end-grafted polymer films of polystyrene (PSt), poly(acrylic acid) (PAAc), poly(N-(2-hydroxypropyl) methacrylamide) (PHPMA), and poly(N-isopropylacrylamide) (PNIPAAm) with 10-200 nm thicknesses were fabricated. Furthermore, the block copolymer films of PAAc (1st block)-b-PSt (2nd block), PSt (1st block)-b-PAAc (2nd block), and a triblock copolymer film of PAAc (1st)-b-PSt (2nd)-b-PHPMA (3rd), were also fabricated, suggesting the "renewability" of the TEMPO-initiated polymerization in the SI-VDP scheme. It is also noticed that the SI-VDP is more efficient than the conventional solution phase polymerization in producing functional polymer brushes such as PNIPAAm, PAAc, or PAAc-b-PSt end-grafted films. In summary, our studies have shown clear advantages of the SI-VDP setup for the nitroxide-mediated polymerization scheme in controlling synthesis of end-grafted homo- and copolymer thin films.     

Rapid growth of polymer brushes from immobilized initiators

This report describes the remarkably rapid synthesis of polymer brushes under mild conditions (50 degrees C) using surface-initiated polymerization. The highly active atom transfer radical polymerization catalyst Cu(I)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane allows synthesis of 100 nm thick poly(tert-butyl acrylate) brushes from initiator-modified Au surfaces in just 5 min. Using the same catalyst, polymerization of 2-hydroxyethyl methacrylate and methyl methacrylate yielded 100 nm thick films in 10 and 60 min, respectively. Such growth rates are an order of magnitude greater than those for traditional free-radical polymerizations initiated from surfaces. These polymerizations also retain some features of controlled radical polymerizations, such as the ability to form block copolymer brushes.     

Functionalization of nylon membranes via surface-initiated atom-transfer radical polymerization

The ability to manipulate and control the surface properties of nylons is of crucial importance to their widespread applications. In this work, surface-initiated atom-transfer radical polymerization (ATRP) is employed to tailor the functionality of the nylon membrane and pore surfaces in a well-controlled manner. A simple two-step method, involving the activation of surface amide groups with formaldehyde and the reaction of the resulting N-methylol polyamide with 2-bromoisobutyryl bromide, was first developed for the covalent immobilization of ATRP initiators on the nylon membrane and its pore surfaces. Functional polymer brushes of 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol)monomethacrylate (PEGMA) were prepared via surface-initiated ATRP from the nylon membranes. A kinetics study revealed that the chain growth from the membranes was consistent with a "controlled" process. The dormant chain ends of the grafted HEMA polymer (P(HEMA)) and PEGMA polymer (P(PEGMA)) on the nylon membranes could be reactivated for the consecutive surface-initiated ATRP to produce the corresponding nylon membranes functionalized by P(HEMA)-b-P(PEGMA) and P(PEGMA)-b-P(HEMA) diblock copolymer brushes. In addition, membranes with grafted P(HEMA) and P(PEGMA) brushes exhibited good resistance to protein adsorption and fouling under continuous-flow conditions.