Smart hydrogels for Novel Optical Functions

Nanocomposites of inherently conductive polyaniline (PANI) within a highly hydrophilic polyvinyl alcohol (PVA) based hydrogel have been produced by coupling a conventional dispersion chemical oxidative polymerization to a subsequent high energy irradiation step, in order to convert the polymer stabilizing the aqueous dispersion, namely the PVA, into a highly water swollen hydrogel incorporating the PANI particles. The incorporation of the electroactive and “pH-sensitive” polymer into a transparent and highly permeable hydrogel matrix has been pursued as a route to the development of a novel class of potentially biocompatible, smart hydrogels that can respond to changes of the surrounding environment with measurable changes in their optical properties. Absorption spectra show that the optical absorption bands typical of PANI, known to be reversibly affected by changes of the polymer oxidation state or pH or both, are well preserved in the PVA hydrogels. Even more interestingly, fluorescence is observed from the nanoparticles of PANI in its inherently conductive form, whose intensity is strongly affected by changes of pH. This has enhanced the importance of this material to a large extent from both a scientific and a practical point of view.     

Overview of Polyvinyl Alcohol Nanocomposite Hydrogels for Electro‐Skin,Actuator, Supercapacitor and Fuel Cell

The properties of polyvinyl alcohol (PVA) nanocomposite hydrogels influenced by nanoparticles are reviewed. Various kinds of nanoparticles with excellent mechanical and electrical properties have been introduced into PVA hydrogel to produce stretchable and conductive PVA nanocomposite hydrogel. Understanding the mechanism between the matrix of PVA hydrogel and nanoparticles is therefore critical for the development of PVA nanocomposite hydrogels. This review focuses on the nanoparticles include carbon nanotubes, graphene oxide and metal nanoparticles, and describes the effects of nanoparticles on the mechanical and conductive properties of PVA nanocomposite hydrogels. A new promising area of soft stretchable PVA nanocomposite hydrogel is highlighted for possible applications. Finally, a brief outlook for future research is presented.     

Embedding magnetic nanoparticles into polysaccharide-based hydrogels for magnetically assisted bioseparation.

Based on the preparation of biocompatible polysaccharide-based hydrogels with stimuli-responsive properties by the copolymerization of maleilated carboxymethyl chitosan with N-isopropylacrylamide, novel magnetic hybrid hydrogels were fabricated by the in situ embedding of magnetic iron oxide nanoparticles into the porous hydrogel networks. Scanning electron microscopy (SEM) and thermogravimetric (TG) analyses showed that the size, morphology, and content of the iron oxide nanoparticles formed could be modulated by controlling the amount of maleilated carboxymethyl chitosan. As confirmed by X-ray diffractometry (XRD), equilibrium swelling ratio, and differential scanning calorimetry (DSC) measurements, the embedding process did not induce a phase change of the magnetic iron oxide nanoparticles, and the resultant hybrid hydrogels could retain the pH- and temperature-responsive characteristics of their hydrogel precursors. By investigating the partition coefficients of bovine serum albumin as a model protein, this magnetic hydrogel material was found to hold a potential application in magnetically assisted bioseparation.     

Designing Polyaniline (PANI) and Polyvinyl Alcohol (PVA) Based Electrically Conductive Nanocomposites: Preparation,Characterization and Blood Compatible Study

Novel electrically conducting and biocompatible composite hydrogel materials comprising of poly (aniline) (PANI) nanoparticles dispersed in a poly (vinyl alcohol) (PVA) – g–poly (acrylic acid) (PAA) matrix were prepared by in situ polymerization of aniline. The prepared ionic hydrogels were evaluated for their water uptake capacity in distilled water. While structural insights into the synthesized polymer was sought by Fourier Transform Infrared (FTIR) spectroscopy and X–Ray Diffraction (XRD) techniques, morphology and dimension of PANI particles embedded into the colored optically semi–transparent polymer films were evaluated by Scanning Electron Microscopy (SEM) analysis and Transmittance Electron Microscopy (TEM) while thermal behavior of composite hydrogel was investigated by Differential Scanning Calorimetry (DSC). Electrical conductivity of composite hydrogels containing different PANI percentage was determined by LCR. Considering the potential of electrically conductive nanocomposites materials in biomedical applications the in vitro blood compatibility of nanocomposites was investigated by employing several in vitro tests.     

Preparation of hydrogel from green polymer

A new method was used for the production of hydrogels from green polymer with a higher swelling ratio. These hydrogels were synthesized first by graft copolymerization between acrylamide (AM) and poly(vinyl alcohol) (PVA) with alkaline or kraft lignin (AM‐PVA‐g‐lignin) and then by mixing with acrylamide monomer. The kraft and alkaline lignins were isolated from pulping liquor and characterized using UV and FT‐IR spectroscopy, and the formed hydrogels were characterized using FT‐IR spectroscopy and scanning electron microscopy (SEM). Compared with kraft lignin hydrogel, the alkaline lignin hydrogel had very high swelling ratios and slower water uptake and deswelling rates attributed to its compatible network structure. The hydrogels formed were used also to study the influence of sodium chloride on the absorption capacity at room temperature and swelling ratios at different temperatures. Copyright © 2004 John Wiley & Sons, Ltd.     

Photocrosslinked methacrylated poly(vinyl alcohol)/hydroxyapatite nanocomposite hydrogels with enhanced mechanical strength and cell adhesion

Poly(vinyl alcohol) (PVA) hydrogels with high water content, good load‐bearing property, low frictional behavior as well as excellent biocompatibility have been considered as promising cartilage replacement materials. However, the lack of sufficient mechanical properties and cell adhesion are two critical barriers for their application as cartilage substitutes. To address these problems, herein, methacrylated PVA with low degree of substitution of methacryloyl group has been synthesized first. Then, methacrylated PVA‐glycidyl methacrylate/hydroxyapatite (PVA‐GMA/Hap) nanocomposite hydrogels have been developed by the photopolymerization approach subsequently. Markedly, both pure PVA‐GMA hydrogel and PVA‐GMA/Hap nanocomposite hydrogels exhibit excellent performance in compressive tests, and they are undamaged during compressive stress–strain tests. Moreover, compared to pure PVA‐GMA hydrogels, 8.5‐fold, 7.4‐fold, and 14.2‐fold increase in fracture stress, Young's modulus and toughness, respectively, can be obtained for PVA‐GMA/Hap nanocomposite hydrogels with 10 wt % Hap nanoparticles. These enhancements can be ascribed to the intrinsic property of PVA‐GMA and strong hydrogen bonding interactions between PVA‐GMA chain and Hap nanoparticles. More interestingly, significant improvement in the cell adhesion can also be successfully achieved by incorporation of Hap nanoparticles. These biocompatible nanocomposite hydrogels have great potential to be used as cartilage substitutes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1882–1889     

Gamma Radiation‐Induced Crosslinked PVA/Chitosan Blends for Wound Dressing

Crosslinked polyvinyl alcohol (PVA) and chitosan polymer blends have been prepared by using gamma irradiation. Chitosan was used in the blends to prevent microbiological growth, such as bacteria and fungi on the polymer. The physical properties of the blend, such as gelation, water absorption, and mechanical properties were examined to evaluate the possibility of its application for wound dressing. A mixture of PVA/chitosan, with different ratios, were exposed to gamma irradiation doses of 20, 30, 50 KGy, to evaluate the effect of irradiation dose on the physical properties of the blend. It was found that the gel fraction increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of chitosan increased in the blend. The PVA/chitosan blend has a water content in the range between 40% and 60% and water absorption between 60% and 100%. The water vapor transmission rate value (WVRT) of the PVA/chitosan blend varies between 50% and 70%. The examination of the microbe penetration shows that the prepared blend can be considered as a good barrier against microbes. Thus, the PVA/chitosan blend showed satisfactory properties for use as a wound dressing.     

PANI导电水凝胶的制备及其进展

导电水凝胶结合了水凝胶和导电高分子电性能的独特特性,并且具有特殊三维网络结构。其中聚苯胺(PANI)由于其独特的导电性能得到了广泛应用,因此PANI导电水凝胶是导电水凝胶中研究最为广泛的。本文综述了PANI导电水凝胶的制备方法及其发展,详述了PANI导电水凝胶的四种制备方法:直接填充、原位聚合、化学交联和物理交联。其中,利用直接填充和原位聚合方法制得PANI水凝胶是较传统的方法,获得的PANI水凝胶是由绝缘的水凝胶组分和导电的PNAI组分组合在一起,电化学性能不高。化学交联法的应用提高了导电水凝胶的电化学性能,物理交联法应用较少。最后,对导电水凝胶材料的应用以及未来发展方向进行了展望。     

Preparation of hybrid hydrogel containing ag nanoparticles by a green in situ reduction method

In this Article, large and uniform Ag nanoparticle-containing hybrid hydrogels were prepared by in situ reduction of Ag ions in cross-linked tapioca dialdehyde starch (DAS)-chitosan hydrogels. In the hybrid hydrogels, chitosan was chosen as a macromolecular cross-linker because of its abundant source and good biocompatibility. The hybrid hydrogel showed good water-swelling properties, which could be controlled by varying the ratio of chitosan to tapioca DAS in the hydrogel. The reductive aldehyde groups in the cross-linked hydrogels could be used to reduce Ag ions to Ag nanoparticles without any additional chemical reductants. Interestingly, by controlling the reduction conditions such as the tapioca DAS concentration, aqueous AgNO(3) concentration, reaction time, and aqueous ammonium concentration, Ag nanoparticles with different sizes and morphologies were obtained. Because of their biocompatibility, degradable constituents, mild reaction conditions, and controlled preparation of Ag nanoparticles, these tapioca DAS-chitosan/Ag nanoparticle hybrid hydrogels show promise as functional hydrogels.     

Chemotactic ion-releasing hydrogel for synergistic antibacterial and bone regeneration

The repair of critical-sized bone defects remains a major concern in clinical care. Herein, a multifunctional hydrogel is rationally designed to synergistically photothermal antibacterial and potentiate bone regeneration via adding magnesium oxide nanoparticle and black phosphorus nanosheet (BPNS) into poly(vinyl alcohol)/chitosan hydrogel (PVA/CS-MgO-BPNS). Under the dual effect of near-infrared irradiation and CS intrinsic antibacterial properties, PVA/CS-MgO-BPNS hydrogel can kill more than 99.9% of Staphylococcus aureus and Escherichia coli. The released Mg ions stimulate the migration of mesenchymal stem cells (MSCs) to hydrogels and synergize with released phosphate to promote osteogenic differentiation. The PVA/CS-MgO-BPNS hydrogel also promotes calcium phosphate particle formation and therefore improves the biomineralization ability. Furthermore, the potential molecular mechanism of PVA/CS-MgO-BPNS to regulate MSCs migration and differentiation is through activating phosphoinositide 3-kinase (PI3K)-Akt signaling pathways through RNA-seq analysis. Finally, the PVA/CS-MgO-BPNS hydrogel could significantly promote endogenous bone tissue regeneration in the rat skull defect model. Taken together, this easy fabricated multifunctional hydrogel has good clinical applicability for the repair of large-scale bone defects.     

PVA改性PAMPS-PAM超高力学性能双网络水凝胶的制备

采用紫外光引发聚合制备了聚乙烯醇(PVA)改性的聚(2-丙烯酰胺基-2-甲基丙磺酸)-聚丙烯酰胺(PAMPS-PAM)双网络(DN)水凝胶.测定并比较了PVA改性前后PAMPS-PAM双网络水凝胶的溶胀动力学;通过扫描电子显微镜(SEM)观察了单网络水凝胶的结构;测定PVA改性前后PAMPS-PAM双网络水凝胶的压缩及拉伸性能.结果表明,经PVA改性后的PAMPS-PAM双网络水凝胶有较高的溶胀比;0.82%PVA用量的PAMPS-PAM双网络水凝胶在90%压缩形变率下仍保持完整、最大拉伸应力达到0.5 MPa,大幅提高PAMPS-PAM双网络水凝胶的力学性能.     

Synthesis,characterization and antibacterial properties of a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag

In this study, a novel nanocomposite based on polyaniline/polyvinyl alcohol/Ag (PANI/PVA/Ag) has been successfully synthesized. The chemical reduction method was used to produce Ag nanoparticle colloidal solution from Ag⁺ ions. The polymerization of aniline occurred in situ for the preparation of polyaniline (PANI) in the presence of ammonium persulfate. With exposure to Ag nanoparticles on the PANI/PVA composite, a new nanocomposite was obtained. The morphology and particle size of the novel nanocomposite was studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR) analyses. According to XRD analysis, the size of nanoparticles was found to be in the range of 10–17 nm. SEM images showed the favored shape of nanoparticles as triangle which is a benign shape for antibacterial analysis. The antibacterial activity of the obtained nanocomposite was also evaluated against Gram positive bacteria Staphylococcus aureus (Staph. aureus) and Gram negative Escherichia coli (E. coli) using the paper disk diffusion method. The antibacterial study showed that the PANI/PVA composite did not have a very good antibacterial activity but PANI/PVA/Ag nanocomposites were found to be effective against two bacteria.     

Photoresponsive water‐dispersible polyaniline nanoparticles through template synthesis with copolymer micelle containing coumarin groups

A novel kind of photosensitive water‐dispersible polyaniline (PANI) nanoparticles was designed and prepared by template synthesis using a photo‐responsive vinyl‐coumarin (VM)/2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) copolymer micelle containing coumarin moieties. The resulting PANI nanoparticles exhibited reversible photo‐crosslinking and photo‐decrosslinking behavior similar to coumarin moiety upon irradiation with different UV light as verified by UV–vis absorption. In addition, photoinduced size change of the PANI nanoparticles after 365 nm UV light irradiation was successfully monitored by dynamic light scattering and transmission electron microscopy measurements, further confirming the photosensitivity of the obtained PANI nanoparticles by the incorporation of VM/AMPS copolymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation, characterization, and photocatalytic activity of polyaniline/ZnO nanocomposite

Polyaniline (PANI)/zinc oxide (ZnO) nanocomposite was synthesized by in-situ polymerization. X-ray diffraction patterns, UV?Cvisible spectroscopy, SEM, and TEM were used to characterize the composition and structure of the nanocomposite. Nanostructured PANI/ZnO composite was used as photocatalyst in the photodegradation of methylene blue dye molecules in aqueous solution. The photocatalytic activity of PANI/ZnO nanocomposite under UV and visible light irradiation was evaluated and was compared with that of ZnO nanoparticles. ZnO/PANI core?Cshell nanocomposite had greater photocatalytic activity than ZnO nanoparticles and pristine PANI under visible light irradiation. According to these results, application of PANI as a shell on the surface of ZnO nanoparticles causes the enhanced photocatalytic activity of the PANI/ZnO nanocomposite. Also UV?Cvisible spectroscopy studies showed that the absorption peak for PANI/ZnO nanocomposite has a red shift toward visible wavelengths compared with the ZnO nanoparticles and pristine PANI. The effect of different operating conditions on the photocatalytic performance of PANI/ZnO nanocomposite in the photodegradation of methylene blue dye molecules was investigated in a bath experimental setup.     

Effects of annealing and the addition of PEG on the PVA based hydrogel by gamma ray

Poly(vinyl alcohol) (PVA) is an interesting material with good biocompatibility, high elasticity and hydrophilic characteristics. PVA hydrogels have been formed through chemical crosslinking with aldehyde, photopolymerization and physical crosslinking with freeze-thawing. In this study, crosslinked hydrogels based on PVA, and poly(ethylene glycol) (PEG) were prepared by gamma-ray irradiation, and then annealed at 120 °C. The properties of a hydrogel such as gel fraction, swelling behavior, gel strength as a function of PEG content and annealing time were investigated. Also, the thermal behaviors were examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The gel fraction decreases with an increase in PEG content and decrease in annealing time. The tensile strength increases with an increase in annealing time. The thermal behaviors have shown different patterns according to the annealing time. The improved properties suggest that PVA/PEG blend hydrogel can be a good candidate for applications in the articular cartilage.     

Preparation and Characterization of a Novel Drug Delivery System: Biodegradable Nanoparticles in Thermosensitive Chitosan/Gelatin Blend Hydrogels

A novel injectable in situ gelling drug delivery system (DDS) consisting of biodegradable N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) nanoparticles and thermosensitive chitosan/gelatin blend hydrogels was developed for prolonged and sustained controlled drug release. Four different HTCC nanoparticles, prepared based on ionic process of HTCC and oppositely charged molecules such as sodium tripolyphosphate, sodium alginate and carboxymethyl chitosan, were incorporated physically into thermosensitive chitosan/gelatin blend solutions to form the novel DDSs. Resulting DDSs interior morphology was evaluated by scanning electron microscopy. The effect of nanoparticles composition on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. Finally, bovine serum albumin (BSA), used as a model protein drug, was loaded into four different HTCC nanoparticles to examine and compare the effects of controlled release of these novel DDSs. The results showed that BSA could be sustained and released from these novel DDSs and the release rate was affected by the properties of nanoparticle: the slower BSA release rate was observed from DDS containing nanoparticles with a positive charge than with a negative charge. The described injectable drug delivery systems might have great potential application for local and sustained delivery of protein drugs.     

层状纳米纤维素膜/PVA复合水凝胶的制备与力学性能研究

采用叠层复合与物理相分离的方法制备了层状纳米细菌纤维素(BC)膜/聚乙烯醇( PVA)复合水凝胶.研究了聚乙烯醇的质量百分数、BC膜的复合层数以及制备条件对复合水凝胶力学性能的影响;通过扫描电镜( SEM)观察比较了复合水凝胶中BC膜层与PVA界面结合情况.结果表明,复合水凝胶的力学性能与PVA的质量百分数和BC膜含水...     

Radiation Synthesis of Superabsorbent Hydrogels Based on Chitosan and Acrylic Acid for Controlled Drug Release

Superabsorbent hydrogels based on the natural polymer chitosan and acrylic acid (CS/AAc) was prepared using ⁶⁰Co gamma radiation as a source of initiation and crosslinking. The factors, which affect the preparation of CS/AAc hydrogels such as irradiation dose, CS/AAc ratios, and acrylic acid monomer concentrations, to get the best optimum conditions, were investigated. The kinetic studies of the swelling of CS/AAc hydrogel showed that it follows a Fickian type of water diffusion. The Fickian constant value ‘n’ was more than 0.5 with a high swelling capacity of 300 g/g as superabsorbent hydrogel. In addition, the suitability of CS/AAc hydrogel as carrier material for the drug Chlortetracycline-HCl has been investigated by adsorption isotherm studies. The performance of drug release from hydrogel systems, influenced by acrylic acid ratio and the effect of pH of the medium was studied.     

Controlled magnetic nanofiber hydrogels by clustering ferritin

We have fabricated biocompatible nanofiber hydrogels with diverse sizes of ferritin clusters according to the mixing temperature of solutions employing electrospinning. Poly(vinyl alcohol) (PVA) was used as a polymeric matrix for fabricating nanocomposites. By thermal means we controlled the interaction between the host PVA hydrogel and the protein shell on ferritin bionanoparticles to vary the size and concentration of ferritin clusters. The clustering of ferritin was based on the partial unfolding of a protein shell of ferritin. By studying the magnetic properties of the PVA/ferritin nanofibers according to the mixing temperature of the PVA/ferritin solutions, we confirmed that the clustering process of the ferritin was related to changes in the superparamagnetic properties and magnetic resonance imaging (MRI) contrast of the PVA/ferritin nanofibers. PVA/ferritin nanofiber hydrogels with diverse spatial distributions of ferritin nanoparticles are applicable as MRI-based noninvasive detectable cell culture scaffolds and as artificial muscles because of their improved superparamagnetic properties.     

Morphology assessment of chemically modified cryostructured poly(vinyl alcohol) hydrogel

The morphology of hydrogels based on poly(vinyl alcohol) (PVA) in their frozen hydrated state, modified with biologically active di- and multifunctional molecules was studied by scanning electron microscopy (SEM) with cryo-attachment. The porosity of samples was found to be more regular and ordered in the case of samples containing difunctional, and especially multifunctional carboxylic acids as compared to the neat PVA hydrogel. The morphology is dependent not only from the hydrogel composition but also the number of freezing-thawing cycles. Resulted highly porous and oriented structure has significant influence on materials properties, such as compressive stress and crosslinking density.