Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process

Cellulose nanofibers (CNFs) were isolated from four kinds of plant cellulose fibers by a chemical-ultrasonic treatment. The chemical composition, morphology, crystalline behavior, and thermal properties of the nanofibers and their intermediate products were characterized and compared. The CNFs extracted from wood, bamboo, and wheat straw fibers had uniform diameters of 10–40 nm, whereas the flax fibers were not uniformly nanofibrillated because of their initially high cellulose content. The chemical composition of each kind of nanofibers was mainly cellulose because hemicelluloses and lignin were significantly removed during chemical process. The crystallinity of the nanofibers increased as the chemical treatments were applied. The degradation temperature of each kind of nanofiber reached beyond 330 °C. Based on the properties of the CNFs, we expect that they will be suitable for use in green nanocomposites, filtration media and optically transparent films.     

Effects of electron beam irradiation of cellulose acetate cigarette filters

A method to reduce the molecular weight of cellulose acetate used in cigarette filters by using electron beam irradiation is demonstrated. Radiation levels easily obtained with commercially available electron accelerators result in a decrease in average molecular weight of about six-times with no embrittlement, or significant change in the elastic behavior of the filter. Since a first step in the biodegradation of cigarette filters is reduction in the filter material's molecular weight this invention has the potential to allow the production of significantly faster degrading filters.     

Effects of hydrolysis conditions on the morphology,crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibers

Cellulose nanocrystals (CNC) were first isolated from kenaf bast fibers and then characterized. The raw fibers were subjected to alkali treatment and bleaching treatment and subsequent hydrolysis with sulfuric acid. The influence of the reaction time on the morphology, crystallinity, and thermal stability of CNC was investigated. Fourier transform infrared spectroscopy showed that lignin and hemicellulose were almost entirely removed during the alkali and bleaching treatments. The morphology and dimensions of the fibers and acid-released CNC were characterized by field emission scanning electron microscopy and transmission electron microscopy. X-Ray diffraction analysis revealed that the crystallinity first increases upon hydrolysis and then decreases after long durations of hydrolysis. The optimal extraction time was found to be around 40 min during hydrolysis at 45 °C with 65% sulfuric acid. The thermal stability was found to decrease as the hydrolysis time increased. The electrophoretic mobility of the CNC suspensions was measured using the zeta potential, and it ranged from −8.7 to −95.3 mV.     

Characterization of cellulose fibers electrospun using ionic liquid

Nonwoven fibers of cellulose were obtained by electrospinning of cellulose in an ionic liquid, 1-butyl-3-methylinmidazolium chloride (BMIMCl), which is known to be one of the non-volatile solvents. The electrospinning setup was modified in such a way that the syringe was contained in a constant-temperature chamber because of the high melting point of BMIMCl, and the electrospun fibers were collected on the water, which immediately removed the remnant solvent from the electrospun cellulose fibers. The effect of the viscosity of the cellulose solution in BMIMCl on the size and the structure of the fibers was investigated. The crystalline structure of cellulose was examined by X-ray diffraction. Also, the effect of dimethyl sulfoxide, which was expected to induce swelling of cellulose, was studied. The minimum diameter of the continuous electrospun cellulose fibers obtained in this work ranged between 500 and 800 nm.     

Thermochromic cellulose fibers

A method of obtaining thermochrome cellulose fibers has been developed. The basis technology used to form fibers was the Lyocell process. This method is based on spinning fibers from concentrated solvents of cellulose, using dry‐wet method in aqueous solidification bath. The cellulose solvent used in this process was N‐oxide‐N‐methylomorpholine (NMMO). The studies were to check on the features of the fibers obtained from solvents with thermochrome pigmentation, in order to evaluate their practical use. Thermochrome modifier used in the experiment was Chromicolor®AQ‐INK, Magenta type#27 pigmentation. This modifier was introduced into the spinning solutions in such amounts that fibers obtained from them would contain 1–10 wt% of pigmentation. Fibers formed out of modified solvents underwent spectral values, thermal, physicomechanical analyses, also their sorption features were evaluated. Copyright © 2007 John Wiley & Sons, Ltd.     

Highly charged nanocrystalline cellulose and dicarboxylated cellulose from periodate and chlorite oxidized cellulose fibers

Softwood cellulose pulp was oxidized by a two-step oxidation process with sodium periodate followed by sodium chlorite at pH 5.0. The oxidized product was first separated into two fractions by centrifugation, and the supernatant was further separated in two fractions by addition of ethanol and centrifugation. Different levels of oxidation were performed on cellulose, and the mass ratio and carboxyl content of each fraction were determined. The first precipitate, which amount decreases with increasing oxidation level, consists of short fiber fragments (microfibrils) with length of 0.6–1.8 μm and width around 120 nm, which for sufficiently high oxidation levels, could readily be made into cellulose nanofibrils by stirring. The second precipitate (after alcohol addition) has a very high crystalline index of 91 % and contains rod-like particles with length of 120–200 nm and diameter around 13 nm, reminiscent of nanocrystalline cellulose. The supernatant contains water-soluble dicarboxylated cellulose, as proven by liquid C-13 NMR.     

Chain scission and anti fungal effect of electron beam on cellulose membrane

Two types of bacterial cellulose (BC) membranes were produced under a modified H&S medium using sucrose as a carbon source, with (CCB) and without (SHB) coconut juice supplement. Both membranes showed similar crystallinity of 69.24 and 71.55%. After being irradiated with E-beams under oxygen limited and ambient condition, the results from water contact angle showed that only the irradiated membrane CCB was increased from 30 to 40 degrees, and irradiation under oxygen ambient condition provided the greatest value. Comparing with the control membranes, smaller water flux was the cases after electron beam irradiation which indicated a reduction of membrane pore area. However, the results from molecular weight cut off (MWCO) revealed that chain scission was greater for membrane SHB and its cut off was increased from 28,000 Da to more than 35,000 Da. FTIR analysis revealed some changes in membrane functional groups, corresponding with the above results. These changes initiated new property of cellulose membranes, an anti-fungal food wrap.     

Hydrodynamically induced formation of cellulose fibers. I. Observations on the formation of cellulose fibers from stirred solutions

Like synthetic polymers, a natural polymer such as cellulose may crystallize in fibrous form from stirred solutions. In the present work, it is demonstrated that cellulose fibers can be formed by precipitation from dimethyl sulfoxide/paraformaldehyde solutions by two methods that involve different mechanisms of fiber formation, viz., (A) precipitation of cellulose by addition of nonsolvent to the stirred cellulose solution, and (B) precipitation of cellulose by coagulation of droplets of cellulose solution in a stirred precipitant. Both processes yield fibers with properties depending on the stirring speed and the coagulant strength. The molecular orientation and tensile strength of the fibers produced by method A was low, but increased with the stirring speed, while some fibers formed by method B reached extremely high orientation, depending on the thickness of the fibers. The two mechanisms of fiber formation are discussed on the basis of the experimental observations.     

Isolation of individual fractions of dioxane lignin from kenaf stems and their study

Summary 1. Three fractions of dioxane lignin have been isolated from kenaf stems of the variety Uzbekskii-15-74 by stepwise extraction with aqueous dioxane containing HCl.2. On the basis of the results of elementary and functional analyses, semiempirical formulas of all the fractions have been derived, and their IR and UV spectra have been recorded.3. It has been shown that an increase in the time of extraction leads to a rise in the molecular weight of the fractions and to a decrease in their degree of polydispersity.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 637–641, September–October, 1978.     

Morphology control of poly(lactic) acid/polypropylene blend composite by using silanized cellulose fibers extracted from coir fibers

The objective of this work is the use of cellulose fibers extracted from coir fibers as Janus nanocylinders to suppress the phase retraction and coalescence in poly(lactic) acid/polypropylene bio-blend polymers via prompting the selective localization of cellulose fibers at the interface using chemical modification. The untreated and modified cellulose fibers extracted from coir fibers using a silane molecule (tetraethoxysilane) were used as reinforcement and as Janus nanocylinder at two weight contents (2.5 wt% and 5 wt%) to manipulate the morphology of the bio-blends. Their bio-composites with PLA-PP matrix were prepared via melt compounding (at PLA/PP: 50/50). The treatment effect on component interaction and the bio-composites properties have been studied via Scanning electron microscopy, infrared spectroscopy, and differential calorimetry analysis. The mechanical and rheological properties of nanocomposites were similarly assessed. Young's modulus and tensile strength of PLA-PP nanocomposites reinforced by silanized cellulose fibers show a great enhancement as compared to a neat matrix. In particular, there was a gain of 18.5% in Young's modulus and 11.21% in tensile strength for silanized cellulose fiber-based bio-blend composites at 5 wt%. From the rheological point of view, it was found that the silanized cellulose fibers in PLA-PP at both fibers loading enhances the adhesion between both polymers leading to tuning their morphology from sea-island to the continuous structures with the appearance of PLA microfibrillar inside of bio-composites. This change was reflected in the relaxation of the chain mobility of the bio-blend composites.

     

Superhydrophobic surfaces from surface-hydrophobized cellulose fibers with stearoyl groups

In this report, surface-hydrophobized cellulose fibers by stearoyl groups were used for the construction of superhydrophobic surfaces. The product after the synthesis contains two components: cellulose microfibers as the major component and nanoscaled segments in small amounts. The crystalline structure of cellulose was maintained after surface modification based on solid-state ¹³C NMR spectroscopy. Superhydrophobic surfaces showing static water contact angles of >150° were fabricated using freshly prepared products containing both components via the facile route, e.g., solvent casting. The cellulose types, microcrystalline cellulose or cotton linter cellulose fibers, did not significantly affect the chemical modification of cellulose fibers, but the superhydrophobic surfaces using surface-hydrophobized cotton linters as starting materials exhibited higher surface hydrophobicity and better impact stability in comparison to shorter microcrystalline cellulose. Due to the presence of a crystalline cellulose skeleton, the obtained superhydrophobic surfaces are stable during the heat treatment at 80 °C.     

Photodegradation of cellulose acetate fibers

The photodegradation of cellulose acetate fibers by ultraviolet light in vacuo at 77°K and at ambient temperature was studied. Three kinds of light sources with different wavelengths between 2353 and 6000 Å were employed. ESR studies at 77°K show that several kinds of free radicals are produced from cellulose diacetate (CDA) and cellulose triacetate (CTA) fibers when irradiated with light of wavelength shorter than 2800 Å. Among these methyl radicals formed decayed within 210 min at 77°K. When the temperature was raised above 77°K, radical transformation occurred at 87°K and most of the free radicals decayed at 193°K, whereas the cellulosic radicals were stable at this and even at higher temperatures. Ultraviolet spectroscopy studies revealed that the main chromophores are the carbonyl function of the acetyl group and acetal groups in the polymer. The photodegradation of the polymers at ambient temperature resulted in the formation of gaseous products (mainly CO, CO₂, and CH₄), together with the loss of bound acetic acid content and sample weight. Decreases in viscosity and reduction of tensile strength and elongation were also observed in the irradiated samples, revealing that the overt effects of ultraviolet light on cellulose acetate fibers are interpreted in terms of free-radical reactions ultimately leading to main-chain and side-group scissions, unsaturation, and the formation of small molecule fragments. Among these, main-chain scission took place predominantly in CDA fiber and side-group scission in CTA fiber. The mechanism of the fundamental photochemical degradation processes of cellulose acetate fibers is elucidated.     

Oriented cellulose films and fibers from a mesophase system

Cellulose mesophases were obtained by preparing concentrated solutions of cellulose (20–55%) in a mixture of N-methyl-morpholine N-oxide (MMNO) and water. The anisotropy depends on four interconnected parameters: the temperature of the solution which, in general, must be lower than 90°C; the concentration of cellulose which must exceed 20%; a water content such that the mole ratio water/anhydrous MMNO is smaller than unity; and the degree of polymerization of the dissolved cellulose. The anisotropic cellulose solutions can readily be oriented during extrusion or casting thus giving fibers or films which upon regeneration exhibit high orientation.     

Extraction of cellulose and preparation of nanocellulose from sisal fibers

In this work a study on the feasibility of extracting cellulose from sisal fiber, by means of two different procedures was carried out. These processes included usual chemical procedures such as acid hydrolysis, chlorination, alkaline extraction, and bleaching. The final products were characterized by means of Thermogravimetric Analysis (TGA), Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Differential Scanning Calorimetry (DSC) and Scanning Electronic Microscopy (SEM). The extraction procedures that were used led to purified cellulose. Advantages and disadvantages of both procedures were also analyzed. Finally, nanocellulose was produced by the acid hydrolysis of obtained cellulose and characterized by Atomic Force Microscopy (AFM).     

Formation of cellulose microspheres and nanocrystals from mildly carboxylated fibers

Cellulose - The ultrastructure of mildly carboxylated swollen tracheids from which cellulose microspheres and cellulose nanocrystals (CNC) were formed was investigated. A mild etherification of...     

Facile fabrication of microfluidic systems using electron beam lithography

We present two fast and generic methods for the fabrication of polymeric microfluidic systems using electron beam lithography: one that employs spatially varying electron-beam energy to expose to different depths a negative electron-beam resist, and another that employs a spatially varying electron-beam dose to differentially expose a bi-layer resist structure. Using these methods, we demonstrate the fabrication of various microfluidic unit structures such as microchannels of a range of geometries and also other more complex structures such as a synthetic gel and a chaotic mixer. These are made without using any separate bonding or sacrificial layer patterning and etching steps. The schemes are inherently simple and scalable, afford high resolution without compromising on speed and allow post CMOS fabrication of microfluidics. We expect them to prove very useful for the rapid prototyping of complete integrated micro/nanofluidic systems with sense and control electronics fabricated by upstream processes.