Equivalent models of corrugated panels

The design of corrugated panels has wide application in engineering. For example corrugated panels are often used in roof structures in civil engineering. More recently corrugated laminates have been suggested as a good solution for morphing aircraft skins due to their extremely anisotropic behaviour. The optimal design of these structures requires simple models of the panels or skins that may be incorporated into multi-disciplinary system models. Thus equivalent material models are required that retain the dependence on the geometric parameters of the corrugated skins or panels. An homogenisation-based analytical model, which could be used for any corrugation shape, is suggested in this paper. This method is based on a simplified geometry for a unit-cell and the stiffness properties of original sheet. This paper outlines such a modelling strategy, gives explicit expressions to calculate the equivalent material properties, and demonstrates the performance of the approach using two popular corrugation shapes.     

Effective elastic properties of flexible chiral honeycomb cores including geometrically nonlinear effects

Flexible chiral honeycomb cores generally exhibit nonlinear elastic properties in response to large geometric deformation, which are suited for the design of morphing aerospace structures. However, owing to their complex structure, it is standard to replace the actual core structure with a homogenized core material presenting reasonably equivalent elastic properties in an effort to increase the speed and efficiency of analyzing the mechanical properties of chiral honeycomb sandwich structures. As such, a convenient and efficient method is required to evaluate the effective elastic properties of flexible chiral honeycomb cores under conditions of large deformation. The present work develops an analytical expression for the effective elastic modulus based on a deformable cantilever beam under large deformation. Firstly, Euler–Bernoulli beam theory and micropolar theory are used to analyze the deformation characteristics of chiral honeycombs, and to calculate the effective elastic modulus under small deformation. On that basis, the expression for the effective elastic modulus is improved by including the stretching deformation of the chiral honeycomb structure for a unit cell under conditions of large deformation. The effective elastic moduli calculated by the respective analytical expressions are compared with the results of finite element analysis. The results indicate that the analytical expression obtained under consideration of the geometric nonlinearity is more suitable than the linear expressions for flexible chiral honeycomb cores under conditions of high strain and low elastic modulus.     

零泊松比手风琴蜂窝等效模量

柔性蒙皮是变形机翼和风力机叶片的关键组成部分。一维变形的柔性蒙皮不仅要求其支撑结构具有良好的面内变形和面外承载能力,还需要具有零泊松比特性。手风琴蜂窝具有零泊松比特性,可用作一维变形柔性蒙皮支撑。为全面分析其面内外弹性变形特性,综合考虑结构的内力弯矩、轴力和剪力,通过卡氏第二定理对其x向等效弹性模量和x-y面内等效剪切模量进行了推导;利用最小余能原理和最小势能原理确定了x-z面内的等效剪切模量;此外还推导了其y和z向的等效弹性模量以及y-z面内的等效剪切模量;然后通过ANSYS有限元仿真对等效模量理论公式进行了验证;最后将本文理论模型与现有模型进行了比较。结果表明,理论公式和有限元仿真吻合较好,在结构设计时采用较大的斜梁高度系数h和斜梁间距系数g,较小的厚度系数t以及较大的竖直梁厚度系数η,有望获得具有较小面内刚度和较大面外刚度的手风琴蜂窝结构。该结果可用于手风琴蜂窝面内外等效模量的快速预测,为一维变形柔性蒙皮的结构设计提供相应的参考。此外,本文理论模型相比传统模型更为精确且具有更加广泛的应用范围。     

Fast approximations of dynamic stability boundaries of slender curved structures

Curved beams and panels can often be found as structural components in aerospace, mechanical and civil engineering systems. When curved structures are subjected to dynamic loads, they are susceptible to dynamic instabilities especially dynamic snap-through buckling. The identification of the dynamic stability boundary that separate the non-snap and post-snap responses is hence necessary for the safe design of such structures, but typically requires extensive transient simulations that may lead to high computation cost. This paper proposes a scaling approach that reveals the similarities between dynamic snap-through boundaries of different structures. Such identified features can be directly used for fast approximations of dynamic stability boundaries of slender curved structures when their geometric parameters or boundary conditions are varied. The scaled dynamic stability boundaries of half-sine arches, parabolic arches and cylindrical panels are studied.     

新型复合材料点阵结构的研究进展

复合材料点阵结构是一种具有轻质、高比强、高比刚以及多功能潜力的新型结构材料, 近几年受到国外学者的极大关注, 是新一代结构材料一体化的理想结构材料. 本文概述了点阵复合材料及结构的发展历程, 包括复合材料点阵结构的拓扑构型设计、制备工艺研究、力学性能表征、失效模式分析、预报模型评价等方面的工作, 并给出了复合材料点阵结构的力学性能、失效模式和理论数值模型汇总表以及修正后的材料强度与密度关系图. 同时, 本文对复合材料点阵结构可能应用的领域进行预测, 并对其未来发展进行了展望.      

Non-linear response of geometrically imperfect sandwich curved panels under thermomechanical loading

This paper deals with the non-linear response of sandwich curved panels exposed to thermomechanical loadings. The mechanical loads consist of compressive/tensile edge loads, and a lateral pressure while the temperature field is assumed to exhibit a linear variation through the thickness of the panel. Towards obtaining the equations governing the postbuckling response, the Extended Galerkin’s Method is used. The numerical illustrations concern doubly curved, circular cylindrical and as a special case, flat panels, all the edges being simply supported. Moveable and immoveable tangential boundary conditions in the directions normal to the edges are considered and their implications upon the thermomechanical load-carrying capacity are emphasized. Effects of the radii of curvature and of initial geometric imperfections on the load-carrying capacity of sandwich panels are also considered and their influence upon the intensity of the snap-through buckling are discussed. It is shown that in special cases involving the thermomechanical loading and initial geometric imperfection, the snap-through phenomenon can occur also in the case of flat sandwich panels.     

基于双曲面蜂窝夹层结构等效模型的研究及数值分析

蜂窝夹层结构在轻量化设计领域一直备受关注,相关的理论研究也日趋完善.然而,很多研究主要集中在平面蜂窝夹层结构上,而对于曲面结构的相关研究甚少.本文对双曲面蜂窝夹芯进行了力学分析,建立了曲面蜂窝夹层板的等效力学模型,同时建立了双曲面蜂窝夹层板详细模型和基于三明治夹层板理论以及曲面夹层板理论的等效模型,最后通过有限元方法对...     

Imperfection sensitivity of curved panels under combined compression and shear

The initial buckling load of curved panels under compressive loads is substantially reduced by the existence of imperfections, in particular geometric imperfections. It is therefore essential that these imperfections are considered in analysing components which incorporate such panels in order to accurately predict their buckling behaviour. Finite element analysis allows fully non-linear analysis of shells containing geometric imperfections, however, to obtain accurate results information is required on the exact size and shape of the imperfection to be modelled. In most cases this data is not available. It is therefore generally recommended that the imperfections are modelled on the first eigenmode and have an amplitude selected according to the manufacturing procedure. This paper presents the effects of varying imperfection shape and amplitude on the buckling and postbuckling behaviour of one specific case, a curved panel under combined shear and compression, to test the accuracy of such recommendations.     

Extension/Compression-Controlled Complete Band Gaps in 2D Chiral Square-Lattice-Like Structures

Achieving tunable band gaps in a structure by external stimuli is of great importance in acoustic applications. This paper aims to investigate the tunability of band gaps in square-lattice-like elastic periodic structures that are usually not featured with notable band gaps.Endowed with chirality, the periodic structures here are able to undergo imperfection-insensitive large deformation under extension or compression. The influences of geometric parameters on band gaps are discussed via the nonlinear finite element method. It is shown that the band gaps in such structures with curved beams can be very rich and, more importantly, can be efficiently and robustly tuned by applying appropriate mechanical loadings without inducing buckling. As expected, geometry plays a more significant role than material nonlinearity does in the evolution of band gaps. The dynamic tunability of band gaps through mechanical loading is further studied. Results show that closing, opening, and shifting of band gaps can be realized by exerting real-time global extension or compression on the structure. The proposed periodic structure with well-designed chiral symmetry can be useful in the design of particular acoustic devices.     

Theoretical prediction on corrugated sandwich panels under bending loads

In this paper, an aluminum corrugated sandwich panel with triangular core under bending loads was investigated. Firstly, the equivalent material parameters of the triangular corrugated core layer, which could be considered as an orthotropic panel, were obtained by using Castigliano’s theorem and equivalent homogeneous model. Secondly, contributions of the corrugated core layer and two face panels were both considered to compute the equivalent material parameters of the whole structure through the classical lamination theory, and these equivalent material parameters were compared with finite element analysis solutions. Then, based on the Mindlin orthotropic plate theory, this study obtain the closed-form solutions of the displacement for a corrugated sandwich panel under bending loads in specified boundary conditions, and parameters study and comparison by the finite element method were executed simultaneously.     

Delamination in sandwich panels due to local water slamming loads

We study delamination in a sandwich panel due to transient finite plane strain elastic deformations caused by local water slamming loads and use the boundary element method to analyze motion of water and the finite element method to determine deformations of the panel. The cohesive zone model is used to study delamination initiation and propagation. The fluid is assumed to be incompressible and inviscid, and undergo irrotational motion. A layer-wise third order shear and normal deformable plate/shell theory is employed to simulate deformations of the panel by considering all geometric nonlinearities (i.e., all non-linear terms in strain–displacement relations) and taking the panel material to be St. Venant–Kirchhoff (i.e., the second Piola–Kirchhoff stress tensor is a linear function of the Green–St. Venant strain tensor). The Rayleigh damping is introduced to account for structural damping that reduces oscillations in the pressure acting on the panel/water interface. Results have been computed for water entry of (i) straight and circular sandwich panels made of Hookean materials with and without consideration of delamination failure, and (ii) flat sandwich panels made of the St. Venant–Kirchhoff materials. The face sheets and the core of sandwich panels are made, respectively, of fiber reinforced composites and soft materials. It is found that for the same entry speed (i) the peak pressure for a curved panel is less than that for a straight panel, (ii) the consideration of geometric nonlinearities significantly increases the peak hydrodynamic pressure, (iii) delamination occurs in mode-II, and (iv) the delamination reduces the hydroelastic pressure acting on the panel surface and hence alters deformations of the panel.     

Study on the Collapse of Pin-Reinforced Foam Sandwich Panel Cores

New fabrication technologies now allow for hybrid sandwich structures, known as X-core, to be manufactured. The X-core panels consist of a pin reinforced polymer foam core with carbon fiber face sheets. Carbon fiber or metallic (Titanium/Steel) pins are inserted into the foam core in the out-of-plane direction and extend from face sheet to face sheet. The through thickness three-point simply supported bending behavior of these panels is used to evaluate the collapse characteristics of the panels. Explicit experimental observations are used to calibrate analytical energy balance models describing the panel collapse as a function of geometry and properties. The mechanical response of X-core sandwich panels is compared to current sandwich materials for material selection.     

柔性曲梁多体系统的研究现状和展望

本文对近几年来柔性多体系统建模理论的研究进展进行了评述, 详细阐述了曲梁结构多体系统动力学研究的理论背景和工程意义. 结合连续介质力学和多体系统动力学理论, 介绍了平面曲梁、空间曲梁应变位移场的描述以及几何非线性问题研究现状. 通过国内外文献及已有的研究, 综述了现有曲梁的离散化方法, 以及这些方法对于定曲率、变曲率曲梁的适用性. 然后, 总结了曲梁刚柔耦合动力学建模和数值计算中的难点问题, 介绍了平面曲梁、空间曲梁实验研究的现状. 最后, 综合全文, 提出了目前研究存在的难点问题, 以及计划解决这些难点问题的方法.      

On the compression of a stack of truncated elastomeric cones as a nonlinearly responsive spring

In an effort to construct a design tool for a mechanical spring featuring highly nonlinear spring stiffness, compression of truncated elastomeric cones has been studied using nonlinear finite element analyses involving neo-Hookean material law and contact elements. Series of finite element models of various geometric aspect ratios of truncated cones were calculated to form a fundamental database of the design tool. It was found that the compressive stiffness of the rubber cone can be non-dimensionalized with respect to the elastic modulus and a characteristic length of the cone. While the stiffness of the truncated rubber cone appears more linear between 0 and 5% of the compression ratio, the stiffness increases exponentially with progressing compression at higher compression ratios. Regression equations of the non-dimensional axial force and spring stiffness were obtained with reasonable accuracy, compared with the original finite element data.     

Structural modeling of sandwich structures with lightweight cellular cores

An effective single layered finite element (FE) computational model is proposed to predict the structural behavior of lightweight sandwich panels having two dimensional (2D) prismatic or three dimensional (3D) truss cores. Three different types of cellular core topology are considered: pyramidal truss core (3D), Kagome truss core (3D) and corrugated core (2D), representing three kinds of material anisotropy: orthotropic, monoclinic and general anisotropic. A homogenization technique is developed to obtain the homogenized macroscopic stiffness properties of the cellular core. In comparison with the results obtained by using detailed FE model, the single layered computational model can give acceptable predictions for both the static and dynamic behaviors of orthotropic truss core sandwich panels. However, for non-orthotropic 3D truss cores, the predictions are not so well. For both static and dynamic behaviors of a 2D corrugated core sandwich panel, the predictions derived by the single layered computational model is generally acceptable when the size of the unit cell varies within a certain range, with the predictions for moderately strong or strong corrugated cores more accurate than those for weak cores. The project supported by the National Basic Research Program of China (2006CB601202), the National Natural Science Foundation of China (10328203, 10572111, 10572119, 10632060), the National 111 Project of China (B06024), the Program for New Century Excellent Talents in University (NCET-04-0958), the Open Foundation of State Key Laboratory of Structural Analysis of Industrial Equipment, and the Doctorate Foundation of Northwestern Polytechnical University.     

可重构力学超材料的设计与波动特性研究

力学超材料中的弯曲梁双稳态结构由于其主动调控性强且调控精度高等优点近年来受到广泛关注.文章利用中心受压弯曲梁的不稳定性设计了六角型双稳态结构,首先建立了等效弯曲梁模型,基于梁变形微分方程及能量最低原理探明了结构双稳态特性的产生基理,之后利用有限元数值计算研究了结构几何参数对其整体力学性能的影响,分别得到了具备自恢复及双稳态性能的结构几何参数范围,绘制了几何参数与力学性能之间的相图.同时,可重构结构的可控变形能力有助于调整整体的色散特性,利用数值仿真研究了具备双稳态特性的结构在拉伸和压缩两种构型下的色散关系,对比分析了不同结构几何参数及构型转变对结构产生的带隙位置及范围的影响,之后对由不同构型单胞组成的周期性结构进行了频响分析来验证带隙计算的准确性.通过六角型可重构结构的力学特性、色散特性研究及频响分析表明可以通过结构几何参数的设计实现对结构整体性能的主动调控,为可逆向设计的弹性波超材料结构研究分析提供了一条可靠路径.     

Imperfection sensitivity of pyramidal core sandwich structures

Lightweight metallic truss structures are currently being investigated for use within sandwich panel construction. These new material systems have demonstrated superior mechanical performance and are able to perform additional functions, such as thermal management and energy amelioration. The subject of this paper is an examination of the mechanical response of these structures. In particular, the retention of their stiffness and load capacity in the presence of imperfections is a central consideration, especially if they are to be used for a wide range of structural applications. To address this issue, sandwich panels with pyramidal truss cores have been tested in compression and shear, following the introduction of imperfections. These imperfections take the form of unbound nodes between the core and face sheets—a potential flaw that can occur during the fabrication process of these sandwich panels. Initial testing of small scale samples in compression provided insight into the influence of the number of unbound nodes but more importantly highlighted the impact of the spatial configuration of these imperfect nodes. Large scale samples, where bulk properties are observed and edge effects minimized, have been tested. The stiffness response has been compared with finite element simulations for a variety of unbound node configurations. Results for fully bound cores have also been compared to existing analytical predictions. Experimentally determined collapse strengths are also reported. Due to the influence of the spatial configuration of unbound nodes, upper and lower limits on stiffness and strength have been determined for compression and shear. Results show that pyramidal core sandwich structures are robust under compressive loading. However, the introduction of these imperfections causes rapid degradation of core shear properties.     

Mechanically tunable phononic band gaps in three-dimensional periodic elastomeric structures

Three-dimensional periodic structures have many applications in acoustics and their properties are strongly related to structural details. Here we demonstrate through simulations the ability to tune the phononic band gaps of 3D periodic elastomeric structures using deformation. The elastomeric nature of the material makes the transformation of the band gaps a reversible and repeatable process, providing avenues for the design of tunable 3D phononic crystals such as sonic switches.     

超音速气流中受热曲壁板的非线性颤振特性

基于von Karman 大变形理论及带有曲率修正的一阶活塞理论, 用Galerkin方法建立了超音速气流中受热二维曲壁板的非线性气动弹性运动方程; 采用牛顿迭代法计算得到由静气动载荷和热载荷引起的静气动弹性变形; 根据李雅谱诺夫间接法分析了壁板初始曲率与温升对颤振边界的影响; 对二维曲壁板的非线性气动弹性方程组进行数值积分求解,分析了动压参数对受热二维曲壁板分岔特性的影响, 给出了典型状态下曲壁板非线性颤振响应的时程图与相图. 分析结果表明对小初始曲率的曲壁板, 温升对其静气动弹性变形影响较大, 且随着温升的增加其颤振临界动压急剧减小; 对具有较大初始曲率的曲壁板, 温升对其静气动弹性变形的影响较弱, 且随着温升的增加颤振临界动压基本保持不变. 初始几何曲率与气动热效应使得曲壁板具有复杂的动力学特性, 不再像平壁板一样, 经过倍周期分岔进入混沌, 而会出现由静变形状态直接进入混沌运动的现象, 且在混沌运动区域中还会出现静态稳定点或谐波运动, 在大曲率情况下, 曲壁板不会产生混沌运动, 而是幅值在一定范围内的极限带振荡.      

柔性电子器件的应用、结构、力学及展望

新的结构布局在延展性要求极高的器件中具有很大的应用潜力, 而使用较成熟的刚性技术制成的器件很难达到延展性要求. 将柔性技术应用到刚性电路中产生具有相同性能且能拉伸、压缩和弯曲的柔性集成电路, 这在健康监测器和表皮电子系统等领域具有重要的应用. 优化柔性电路结构, 研究其力学性能能提高系统的延展性. 本文对这些系统的应用、柔性电路的结构布局、力学行为进行总结概述. 最后, 就柔性电子器件未来研究的方向提出几点观点.