Crystal structure determination of Pb2Sr2YCu3O8+δ (δ=0, 1.67) by powder neutron diffraction

Crystal structures of Pb₂Sr₂YCu₃O_8+δ(δ=0.0 and 1.67) were determined by powder neutron diffraction. For δ=0, it had been indicated by powder X-ray diffraction that the structure was a monoclinic one. The R factors of the present analysis for the monoclinic structure were about 3/4 of those for the previous orthorhombic ones. The structure was almost the same as the previous X-ray result except z(O(2)). For the annealed phase, the tetragonal and the orthorhombic structures had been presented by X-ray diffraction and by neutron diffraction, respectively. The R factors of the present analysis for the orthorhombic structure were about 5/6 of those for the tetragonal structure. The distance between the Pb plane and the oxygen-deficient Cu plane was found to become larger in proportion to δ, though there occurs a phase separation in the low-δ region.     

Superconductivity magnetism and low temperature specific heat in YBa2(Cu1−xFex)3O7−δ with δ0 and δ1

Magnetic and low temperature specific heat measurements have been performed on iron doped YBa₂(Cu_1−xFe_x)₃O_7−δ samples with different oxygen contents (δ0 and δ1). Iron doping induces an orthorhombic to tetragonal transition and a decrease of both T_c and diamagnetic signal. Low temperature specific heat measurements reveal a Schottky type anomaly for δ0 samples with x=0.01 (1.8 K) and x=0.02 (3 K). This anomaly is attributed to magnetic interactions within iron limited chains. A numerical analysis of this effect is proposed.     

Structural phase transitions in the layered bismuth oxide BaBi4Ti4O15

The structure of the n=4 Aurivillius oxide BaBi₄Ti₄O₁₅ has been studied at room temperature using powder neutron diffraction, and from 300 to 1000 K using synchrotron X-ray diffraction methods. The structure is orthorhombic (space group A2₁am) at 300 K and transforms to a tetragonal (I4/mmm) structure near 700 K.     

New ferromagnetic La3Co2TaO9 double perovskite: Structural and magnetic properties

The new double perovskite La₃Co₂TaO₉ has been prepared by a solid-state procedure. The crystal and magnetic structures have been studied from X-ray powder diffraction (XRPD) and neutron powder diffraction (NPD) data. Rietveld refinements were performed in the monoclinic space group P2₁/n. The structure consists of an ordered array of alternating B′O₆ and B″O₆ octahedra sharing corners, tilted along the three pseudocubic axes according to the Glazer notation a⁻b⁻c⁺. Rietveld refinements show that at RT the cell parameters are a=5.6005(7) Å, b=5.6931(7) Å, c=7.9429(9) Å and β=89.9539(7)°, and the refined crystallographic formula of this “double perovskite” can be written as La₂(Co)_2d(Co_1/3Ta_2/3)_2cO₆. Magnetization measurements and low-temperature NPD data show that the perovskite is a ferromagnet with T_C=72 K. At high T it follows the Curie–Weiss law with an effective magnetic moment of 3.82μ_B per Co ion which is very close to spin only Co²⁺ (HS).     

铌酸钾钠基无铅压电陶瓷的X射线衍射与相变分析

分析了斜方相、四方相铌酸钾钠基无铅压电陶瓷材料的结构和X射线衍射图谱的特点. 对于铌酸钾钠基压电材料斜方相结构, 从构成晶胞的一个单斜原胞进行分析, 计算出X射线衍射谱上每个衍射角附近的衍射峰数目和相对强度. 提出了2θ在20°—60°范围内根据(1 0 2)衍射峰(52°附近)和(1 2 1)衍射峰(57°附近)劈裂的数目区分斜方和四方相的新方法. 对于多晶陶瓷粉末, 可以更简便的由22°(或45°)附近前后峰的相对高低来判断斜方、四方相. 关键词： 铌酸钾钠 无铅压电陶瓷 X射线衍射 相变     

Crystal structure of the quaternary compound CuTa2InTe4 from X-ray powder diffraction

The crystal structure of the new quaternary compound CuTa₂InTe₄ was studied using X-ray powder diffraction data. The powder pattern refined by the Rietveld method indicates that this material crystallizes in the tetragonal system with space group I-4¯2m (No. 121), Z=2, and unit cell parameters a=6.1963(2) Å, c=12.4164(4) Å, c/a=2.00 and V=476.72(3) Å³. The structural and instrumental refinement of 28 parameters led to R_p=10.4%, R_wp=11.1%, R_exp=6.8% and χ²=2.7 for 96 independent reflections.     

Birefringence,X-ray and neutron diffraction measurements on the structural phase transitions of (CH3NH3)2 MnCl4 and (CH3NH3)2FeCl4

We used optical birefringence, X-ray and neutron diffraction methods with single crystals to study the structural phase transitions of the perowskite-type layer structures of (CH₃NH₃)₂MeCl₄ with Me=Mn, Fe. The Mn-compound shows the following structural transitions at 394 K — a continuous order-disorder phase transition from tetragonal symmetry $\text{I4}\text{mmm}$ to orthorhombic space group Abma (Cmca in reference 10); at 257 K — a discontinuous transition to a second tetragonal modification; at 95 K — a discontinuous transition to a monoclinic phase. For the Fe-compound the corresponding transition temperatures are 328 K and 231 K, respectively. A low temperature monoclinic phase could not be observed. The lattice parameters of the different modifications were determined as a function of temperature. The temperature dependent course of the order parameter has been investigated for the order—disorder transition. For both compounds, all the methods used gave the same value for the critical exponent of β = 0.315.     

Growth of superconducting single-crystalline (Lu, Ca) Ba2Cu3O7−δ whiskers

Single-crystalline (Lu, Ca)Ba₂Cu₃O_7−δ (Lu(Ca)123) whiskers have been successfully grown using the Te-doping method. X-ray diffraction patterns of Lu(Ca)123 whiskers showed sharp (0 0 l) peaks corresponding to REBa₂Cu₃O_7−δ phase (RE = rare earth elements). Transport measurements showed that the superconducting transition occurred at 83 K in the obtained whiskers.     

Thermogalvanic power and fast ion conduction in δ-Bi2O3 and δ-(Bi2O3)1−x(R2O3)x with R = Y, Tb---Lu

The thermogalvanic power (Seebeck coefficient) of O^2- conducting δ-Bi₂O₃ and δ-(Bi₂O₃)_1−x(Y₂O₃)_x has been measured directly as a function of temperature and partial oxygen pressure in N₂---O₂ mixtures. The of δ-(Bi₂O₃)_0.75(R₂O₃)_0.25 with R = Tb---Lu was indirectly determined using an isothermal concentration cell technique. Except for pure δ-Bi₂O₃, the heat of transport is much smaller than the activation energy for O^2- conduction for all materials. The vibrational freedom of O²⁻ ions in all δ-stabilized materials is reflected in their IR spectra at room temperature. Two prototypes of a thermogalvanic P_O2 meter were tested.     

Effect of BiFeO3 addition on Bi2O3–ZnO–Nb2O5 based ceramics

In this paper, low temperature sintering of the Bi₂(Zn_1/3Nb_2/3)₂O₇ (β-BZN) dielectric ceramics was studied with the use of BiFeO₃ as a sintering aid. The effects of BiFeO₃ contents and the sintering temperature on the phase structure, density and dielectric properties were investigated. The results showed that the sintering temperature could be decreased and the dielectric properties could be retained by the addition of BiFeO₃. The structure of BiFeO₃ doped β-BZN was still the monoclinic pyrochlore phase. The sintering temperature of BiFeO₃ doped β-BZN ceramics was reduced from 1000 °C to 920 °C. In the case of 0.15 wt.% BiFeO₃ addition, the β-BZN ceramics sintered at 920 °C exhibited good dielectric properties, which were listed as follows: ε_r = 79 and tan δ = 0.00086 at a frequency of 1 MHz. The obtained properties make this composition to be a good candidate for the LTCC application.     

Preparation of α-Fe2O3 nanoparticles by high-energy ball milling

α-Fe₂O₃ nanoparticles were prepared by high-energy ball milling using α-FeOOH as raw materials. The prepared samples were characterized by transmission electron microscopy (TEM), Mössbauer spectroscopy, X-ray diffraction (XRD) and differential thermal analysis–thermogravimetric analysis (DTA–TGA). The results showed that after 90 h milling α-Fe₂O₃ nanoparticles were obtained, and the particle size is about 20 nm. The mechanism of reaction during milling is supposed that the initial α-FeOOH powder turned smaller and smaller by the high-speed collision during ball milling, later these particles turned to be superparamagnetic, at last these superparamagnetic α-FeOOH particles were dehydrated and transformed into α-Fe₂O₃.     

Crystallographic study of tetragonal,superconducting YBa2(Cu0.93Fe0.05)3O7

Single crystal- and powder X-ray diffraction, powder neutron diffraction at room temperature and 3 K, high resolution electron microscopy and electron diffraction were used to study the crystal- and defect-structure of YBa₂(Cu_0.93Fe_0.05)₃O₇. Crystals of this compound are superconducting (T _c 80 K) and appeart to be tetragonal down to at least 3 K. The structure resembles that of the undoped YBa₂Cu₃O₇ phase with the oxygen content being very close to 7.0 and the Fe atoms preferentially occupying the Cu(1) site. A copper deficiency is shown to be present on this site too, leading to the approximate formula YBa₂(Cu_0.97Fe_0.03)₂(Cu_0.86Fe_0.10.04)O₇. High resolution electron microscopy reveals the existence of orthorhombic micro-domains, 20–30 Å in diameter, probably due to short range ordering of oxygen atoms on the O(1) site. In view of these results the structure has to be regarded as being tetragonal only in a statistical sense.     

Dependence of property, crystal structure and electric conductivity on substitution content and synthetic process of T′-La2−xRExCuO4−δ (RE = Sm and Tb)

We synthesized T′-La_2−xRE_xCuO_4−δ (RE = Sm and Tb) by a co-precipitation method and sintering in vacuum at various temperatures, and investigated relationship among the crystal structure, average valence of Cu, oxygen content and electric conductivity. From X-ray diffraction measurements, it was confirmed that a main phase of the product was T′ structure (S. G.: I4/mmm) regardless of the rare earth element and its concentration, although an impurity phase was observed in a part of samples. In the samples with low average valence of Cu, the resistivity showed a metallic behavior and remarkably decreased at low temperature. Rietveld analyses using synchrotron X-ray diffractions suggested that the electric conductivity was improved by decreasing a bond length of Cu–O1 in the case of La_2−xSm_xCuO_4−δ.     

Synthesis and characterization of HgBa2Can−1CunO2n+2+δ (n = 1, 2, and 3)

We have successfully prepared the first three members of the mercury-based superconducting compounds Hg--- Ba₂Ca_n−1Cu_nO_2n+2+δ, namely Hg---1201, Hg---1212 and Hg---1223 with high purity and very good quality. T he influence of the synthesis parameters is studied in detail. Using the sealed quartz tube method, very simple procedures are found to ensure a 100% reproducibility of nearly 100% pure Hg---1201 and 85–90% Hg---1212 and Hg---1223. Oxygen annealing of the sample Hg---1201 at 300°C for 18 h results in an enhancement of its critical temperature up to 97 K. The symmetry of the first and second members is tetragonal with lattice parameters

Full-size image (2K)

, respectively. X-ray diffraction lines of Hg---1223 can be indexed in a tetragonal cell with

Full-size image (1K)

as well as in an orthorhombic cell with lattice parameters

Full-size image (1K)

.     

Ba2YCu3O7−δ crystal surface layers: Orthorhombic splitting, dislocations, and chemical etching

We find by transmission electron diffraction that the orthorhombic splitting of the upper surface layers ( <1 μm) of single crystal Ba₂YCu₃O_7−δ is reduced, differing by 10 to 30 percent from the bulk value. We also find by transmission electron microscopy that in general the surfaces are of inferior quality and, thus, not representative of the bulk. These results have important consequences for those experiments that probe only the upper surface layers. By etching with Br/ethanol and HClO₄/NaClO₄ the poor quality surfaces are removed.     

The solid solutions Na3(1−x)Alx2xPO4: room temperature powder neutron diffraction studies of the two compositions x=0.025 and x=0.2

The crystal structures of the high-temperature modifications of sodium and silver orthophosphates have been determined using powder neutron diffraction (PND) data. II-Na₃PO₄ adopts the space group Fm3m with at 400°C. The PO³⁻₄ group is centered around the origin, but it shows high orientational disorder. The sodium ions occupy the and sites. II-Ag₃PO₄, at 650°C, is similar with . The structure of I-Ag₃PO₄ at room temperature

Full-size image (<1K)

has been re-examined by single-crystal X-ray diffraction. The derived model, with R=0.019 for 116 independent reflections, is in agreement with the latest work reported in the literature. The structure of I-Ag₃PO₄ at 375°C, as determined by PND, has , and displays no gross modifications from that observed at 25°C, although the anisotropic nature of the silver sites is markedly more pronounced at this higher temperature. The cation mobility is discussed in relation to the high-temperatures structures.     

Electrical properties of perovskite-type La(Cr1−xMnx)O3+δ

Perovskite-type La(Cr_1−xMn_x)O_3+δ (0.0x1.0) was synthesized using a sol–gel process. The crystal structure of La(Cr_1−xMn_x)O_3+δ changes from orthorhombic to rhombohedral at x=0.6. The Mn⁴⁺ ion content increases monotonically in the range 0.2x1.0. The magnetic measurement of La(Cr_1−xMn_x)O_3+δ indicates that a Mn³⁺ ion is a high-spin state with (d)³(dγ)¹. The variation of the average (Cr, Mn)-O distance is explained by ionic radii of the Cr³⁺, the Mn³⁺, the Mn⁴⁺ ions. Since the log σT–1/T curve is linear and the Seebeck coefficient (α) is independent of temperature, it is considered that La(Cr_1−xMn_x)O_3+δ is a p-type semiconductor and exhibits the hopping conductivity.     

Luminescent properties of R2(MoO4)3:Eu (R=La, Y, Gd) phosphors prepared by sol-gel process

A series of red phosphors R_0.8Eu_1.2(MoO₄)₃ (R=La, Y, and Gd) have been synthesized by sol-gel method. The crystallization processes of the phosphor precursors were characterized by X-ray diffraction (XRD) and thermogravimetry-differential thermal analysis (TG-DTA), and the properties of these resulting phosphors have also been characterized by photoluminescence (PL) spectra and reflectance spectra. Field emission scanning electron microscopy (FE-SEM) was also used to characterize the shape and the size of the samples. The results of TG-DTA and XRD indicated that all of the R_0.8Eu_1.2(MoO₄)₃ (R=La, Y, and Gd) phosphors crystallized completely at 650 °C. Y_0.8Eu_1.2(MoO₄)₃ and Gd_0.8Eu_1.2(MoO₄)₃ have two structures, monoclinic and orthorhombic, while La_0.8Eu_1.2(MoO₄)₃ only adopts monoclinic structure. The luminescent properties of phosphors R_0.8Eu_1.2(MoO₄)₃ (R=La, Y, and Gd) are dependent on their structures to some extent. The orthorhombic Y_0.8Eu_1.2(MoO₄)₃ and Gd_0.8Eu_1.2(MoO₄)₃ phosphors show very similar luminescent properties, which differ from those of phosphors with monoclinic structure. For all of R_0.8Eu_1.2(MoO₄)₃ (R=La, Y, and Gd) phosphors, intense red emission is obtained by exciting at ∼394 and ∼465 nm which are owing to the sharp ⁷F₀→⁵L₆ and ⁷F₀→⁵D₂ lines of Eu³⁺. Two strongest lines at 394 and 465 nm in excitation spectra of these phosphors match well with the two popular emissions from near-UV and blue GaN-based LEDs, so they could be used as red components for white light-emitting diodes.     

Structural phase transition in a perovskite-type NH3(CH2)3NH3CuCl4 crystal – X-ray and optical studies

X-ray powder studies and optical studies (polarized microscopic observation and linear birefringence studies) of the crystal NH₃(CH₂)₃NH₃CuCl₄ are presented. The X-ray powder studies revealed a change of symmetry from orthorhombic room-temperature phase to monoclinic phase above 434 K. A reversible phase transition of the first order at 434 K on heating and 432 K on cooling was observed in birefringence studies. Optical polarized microscopic observation revealed monodomain and multidomain states in the room-temperature orthorhombic phase with domain walls in (110) and (1-10) planes. The hypothetical prototypic phase is expected to be tetragonal. The change of symmetry from orthorhombic to monoclinic and expected domain structure was found above 434 K in the (010) plane.     

High temperature structural studies of SrRhO3

High resolution X-ray powder diffraction studies have shown SrRhO₃ to transform from an orthorhombic Pnma structure at room temperature through an intermediate Imma phase to a tetragonal I4/mcm structure near 800 °C. The orthorhombic Imma phase exists over a very limited temperature range, of less than 20°. The diffraction data suggests the Pnma to Imma transition is continuous and demonstrates that the Imma-I4/mcm transition is first order.