Salt effect in the base-catalyzed polymerization of unsaturated amide compounds. IV. Polymerization of p-vinylbenzamide in the presence of LiCl/N,N,N′,N′-tetramethylethylenediamine

In the presence of lithium chloride and N,N,N′,N′-tetramethylethylenediamine, p-vinylbenzamide was polymerized in basic media to form a polymer with structure consisting of units due to both proton transfer and vinyl type polymerization, whereas in the presence of the salt alone the monomer underwent exclusively vinyl type of polymerization to give a polystyrene derivative:      

Specific solvent effects of dioxane and N,N,N′,N′-tetramethylethylenediamine in the anionic polymerization of styrene with Li+ as counterion

The anionic propagation of living polystyryllithium shows a distinctly different behavior depending on the nature of the solvent used (polar or non-polar). To demonstrate the transition of one type of behavior to the other, studies have been carried out in the past in mixtures of benzene and tetrahydrofuran (THF) and mixtures of dioxane and THF.     

N,N′,N′′,N′′′‐Tetraethylterephthalamidinium bis(tetrazolate)

The crystal structure of the title 2:1 salt of tetrazole and a substituted terephthal­amidine, C₁₆H₂₈N₄²⁺·2CHN₄^?, contains an infinite network of hydrogen bonds, with short N?N distances of 2.820 (2) and 2.8585 (19) Å between the tetrazolate anion and the amidinium cation. Involvement of the lateral N atoms of the tetrazole in the hydrogen bonding appears to be a typical binding pattern for the tetrazolate anion.     

N,N,N′,N′‐Tetrasubstituted Piperazinium Salts of Perfluorinated Acids

Well crystallized diquaternary piperazinium salts of perfluorocarboxylic acids can be prepared by thermal rearrangement of a primary product obtained from the appropriate fluorinated acid chloride and N,N‐dialkylamino‐ethanol. The mechanism of the ring closure step is discussed. The synthetic strategy easily gives access to structurally different piperazinium perfluorocarboxylates. The title compounds show surface activity and can be regarded as ionic amphiphiles.     

Synthesis of substituted polymethylenes by radical polymerization of N,N,N′,N′-tetraalkylfumaramides and their characterization

Radical polymerization of N,N,N′,N′-tetraalkylfumaramides (TRFAm) bearing methyl, ethyl, n-propyl, isopropyl, and isobutyl groups as N-substituents (TMFAm, TEFAm, TnPFAm, TIPFAm, and TIBFAm, respectively) was investigated. In the polymerization of TEFAm initiated with 1,1′-azobiscyclohexane-1-carbonitrile (ACN) in benzene, the polymerization rate (R_p) was expressed as follows: R_p = k [ACN]^0.28 [TEFAm]^1.26, and the overall activation energy was 102.1 kJ/mol. The introduction of a bulky alkyl group into N-substituent of TRFAm decreased the R_p in the following order: TMFAm > TEFAm > TnPFAm > TIBFAm > TIPFAm ～ 0. The relative reactivities of these monomers were also investigated in radical copolymerization with styrene (St) and methyl methacrylate (MMA). In copolymerization of TRFAm (M₂) with St (M₁), monomer reactivity ratios were determined to be r₁ = 1.07 and r₂ = 0.20 for St–TMFAm, and r₁ = 1.88 and r₂ = 0.11 for St–TEFAm, from which Q₂ and e₂ values were estimated to be 0.35 and 0.44 for TMFAm, and 0.19 and 0.47 for TEFAm, respectively. The other TRFAm were also copolymerized with St, but copolymerization with MMA gave polymers containing a small amount of TRFAm units. The polymer from TRFAm consists of a less-flexible poly(N,N-dialkylaminocarbonylmethylene) structure. The solubility and thermal property of the polymers were also investigated.     

N,N,N′,N′‐Tetraalkylaminoazoxybenzene Derivatives; Convenient Synthesis and Mechanistic Study

N,N,N′,N′‐tetraalkyaminoazoxybenzene derivatives were conveniently prepared by the coupling of N,N‐dialkylnitrosoaniline in the presence of acetone and KOH. The reaction mechanism was proposed and investigated, and the structure of compound 3b was also confirmed by single crystal X‐ray diffractometry.     

Solvation of polymeric organolithium compounds. Heats of interaction of tetrahydrofurans and N,N,N′,N′-tetramethylethylenediamine (TMEDA) with poly(butadienyl)lithium

The enthalpies of interaction of tetrahydrofuran, 2,5-dimethyltetrahydrofuran and N,N,N′,N′-tetramethylethylenediamine (TMEDA) with 0.02M benzene solutions of poly(butadienyl)lithium (M _N～4,000) were measured as a function of R([base]/[Li]) using highdilution, solution calorimetry at 25°C. At low R values (ca. 0.2) the enthalpy of interaction of THF ( — 6.1 kcal/mol) is only 1.5 kcal/mol more exothermic than with 2,5-dimethyltetrahydrofuran and both decrease rapidly with increasing R value. These results indicate that this coordination process is much less sensitive to the steric requirements of the base than analogous processes for poly(isoprenyl)lithium and poly(styryl)lithium. The concentration dependence for the enthalpy of interaction with TMEDA falls off precipitously with increasing R values from an initial value of ?12.4 kcal/mol at R = 0.14. These results suggest either a higher degree of association or a less favorable dissociation equilibrium constant for poly(butadienyl)lithium versus poly(isoprenyl)lithium.     

N,N,N′,N′‐Tetra­methyl­ethyl­enedi­ammonium dichloride

The structure of the title compound, C₆H₁₈N₂²⁺.2Cl^?, has been determined and has a centre of symmetry. The mol­ecule has strong intermolecular hydrogen bonding between each Cl^? and an N—H bond [Cl?N = 3.012 (3) Å].     

Synthese,Komplexbildung und Kristallstrukturen von Cyclotriphosphazenen mit N,N,N′,N′‐Tetramethylguanidingruppen

Synthesis, Complex Formation, and Crystal Structures of Cyclotriphosphazenes with N,N,N′,N′‐Tetramethylguanidine Groups The reactions of monochloropentaphenoxycyclotriphosphazene and hexachlorocyclotriphosphazene with N,N,N′,N′‐tetramethylguanidine yield the mono and tetra substituted products 2‐(N,N,N′,N′‐tetramethylguanidine)‐2,4,4,6,6‐pentaphenoxy‐2 λ⁵,4 λ⁵,6 λ⁵‐cyclotriphosphaza‐1,3,5‐trien ( 1 ) and 2,2‐dichlor‐4,4,6,6‐tetra‐(N,N,N′,N′‐tetramethylguanidine‐2 λ⁵,4 λ⁵,6 λ⁵‐cyclotriphosphaza‐1,3,5‐trien ( 2 ) respectively; no hexa functionalized product could be obtained, even with high excess of the nucleophile. Electron release from the exocyclic amino substituent reduces the acceptor ability of the phosphorus atoms. Reactions of ( 2 ) with copper(II) chloride and palladium(II) bis(acetonitrilo)dichloride yield metal complexes with a ligand : metal ratio of 1 : 2. The X‐ray structure analyses of N₃P₃Cl₂(NC(N(CH₃)₂)₂)₄ · 2 CuCl₂ ( 2 a ) and N₃P₃Cl₂(NC(N(CH₃)₂)₂)₄ · 2 PdCl₂ ( 2 b ) show that each metal atom is coordinated by two imino nitrogen atoms in geminal positions and two chloride atoms in a square planar arrangement.     

N,N,N′,N′-tetramethylethylene diamine as a co-catalyst in the anionic polylymerization of methyl methacrylate

Anionic polymerization of methyl methacrylate in toluene solution has been studied. The polymerizations were initiated by fluorenyllithium as well as by butyl-, benzyl-, and phenylmagnesium halides, and carried out in the presence of polar additives. Especially the organomagnesium initiators gave generally rise to highly isotactic polymers (mm = 0.90-0.95) in the absence of solvating additives. In the presence of the bidentate ligand N,N,N′,N′-tetramethylethylene diamine (TMEDA) at molar ratios of 1–2 relative to magnesium, highly syndiotactic polymers were obtained at ?78°C (rr = 0.8–0.9), while at higher temperatures stereoblock polymers or stereocomplexes were formed. It is proposed that at low temperatures the magnesium cations are strongly solvated under the influence of TMEDA, with the formation of monomeric ion pairs. The large solvated magnesium cations will not have any directional influence on the monomer in the propagation step, with syndiotactic propagation as a result.