Effect of iron (III) hydroxide sol as a support for oligomerization of l-phenylalanine in aqueous solution

An oligomerization of l-phenylalanine in aqueous solution was studied in the presence of iron (III) hydroxide sols. To an aqueous solution of the iron hydroxide sols prepared from iron (III) chloride,l-phenylalanine with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride was added. After stirring for 48 h at 0 °C, 3 M HCl solution was added to the reaction mixture to decompose the colloidal iron hydroxide. Oligo (l-phenylalanine) was isolated by centrifugation and washed with acidic water. The maximum yield of 15% was obtained at around pH 6.3. This value was 2.5 times higher than that obtained without the iron hydroxide sols at the same pH. Adsorption study of l-phenylalanine indicated that assemblies of l-phenylalanine onto the iron hydroxide sols were predominant factor to improve the yield of the oligomerization product. The presence of nitrate anions changes the pattern of the yield of oligo (l-phenylalanine) against pH values. The maximum yield of 20% was obtained at around pH 3. This value was four times higher than that obtained without the iron hydroxide sols at the same pH. Effect of NaCl for the oligomerization of l-phenylalanine in an aqueous solution was also studied.     

Extraction of cobalt by the AOT microemulsion system

The extraction of cobalt by Winsor II microemulsion system was studied. In the bis (2-ethylhexyl) sulfosuccinate sodium salt (AOT)/n-pentanol/n-heptane/NaCl system, AOT was used as a anionic surfactant to form microemulsion in n-heptane, n-pentanol was injected in the microemulsion as a cosurfactant. Co(II) was found to be extracted into the microemulsion phase due to ion pair formation such as Co²⁺(R–SO₃ ⁻)Cl. The influence of different parameters such as the volume ratio of aqueous phase to microemulsion, surfactant concentration, pH of the feed solutions, cosurfactant concentration as well as temperature on the extraction yield (E%) were investigated. The results showed that it was possible to extract 95% of cobalt by the AOT Winsor II microemulsion.     

Chemiluminescence of Cypridina Luciferin Analogs. Part 3. MCLA Chemiluminescence with Singlet Oxygen Generated by the Retro-Diels-Alder Reaction of a Naphthalene Endoperoxide

The chemiluminescence of the Cypridina luciferin analog, 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroirnidazo[1,2-a]pyrazin-3-one (MCLA), with O₂ (¹Δ_g) generated by the retro-Diels-Alder reaction of 3-(4′-methyI-l'-naphthyl)-propionic acid endoperoxide was studied in an aqueous solution with pH 7.12 at 37°C. The retro-Diels-Alder reaction occurs with a first-order rate constant of (4.16 ± 0.13) × 10^?4/s to quantitatively yield O₂ (¹Δ_g) and 3-(4′-methyl-l'-naphthyl (-propionic acid. MCLA consumed equimolar amounts of O₂ (¹Δ_g) with a second-order rate constant (6.96 ± 0.27) × 10⁸/M/s to emit light in an aqueous solution with pH 7.12 at 37°C. The chemiluminescence spectrum was identified as the fluorescence spectrum of 2-acetylamino-5-(p-methoxyphenyl)pyrazine (OMCLA), a major chemiluminescence reaction. Chemiluminescence spectra and product yields for MCLA reactions with O₂¹Δ_g, with O₂ (³Σ^?_g) and with superoxide anion radicals are identical, suggesting that all of these reactions occur via a common MCLA-2-hydrope-roxide intermediate formed by a combination of MCLA radicals and superoxide anion radicals. We have established practical use of NEPO as an O₂ (¹Δ_g) source and MCLA as a biological probe for detecting O₂ (¹Δ_g).     

Effect of Mixing Entropy on the Static Yield Stress of a Liquid Dispersion of Solid Particles: Comparison between Si3N4and Ca3(PO4)2Aqueous Suspensions

Experimental measurements of the static yield stresses τ of silicon nitride (SN, Si₃N₄) and α-tricalcium phosphate (TCP, α-Ca₃(PO₄)₂) aqueous dispersions have been performed for different pH values of the liquid medium and, as a result, the two τ vs pH behaviors are quite different. In agreement with the DLVO theory, the static yield stress value for silicon nitride is maximal at the isoelectric point of the slurry (pH_iep^(SN)= 8.0 ± 0.1) and, for higher and/or lower suspension pH values, it decreases progressively. On the other hand, in tricalcium phosphate dispersed systems, the maximum value of τ is not observed at the isoelectric point (pH_iep^(TCP)= 6.7 ± 0.1) but two relative maximum values, τ_aand τ_b, are observed for two suspension pH values in the acid/basic environments, namely, for pH pH_iep^(TCP). First, displacements of the pH from the isoelectric point in both environments are accompanied by an increase in τ; second, after the maximum τ values have been reached, the static yield stress decreases with the increase in the [H⁺]/[OH⁺] ions in the solution. It is shown that this phenomenon can be interpreted as an effect of the mixing entropy relative to the solid TCP aggregates, which is very sensitive to the suspension pH. Phenomenological and theoretical explanations are developed, respectively, by a heuristic recasting of the Hamaker expression for the London–van der Waals forces and by a relationship between the static yield stress and the number of solid aggregates; this relation is based on recently proposed methods for investigating the agglomeration/adsorption phenomena in a dispersed system.     

Phase Transition of Acrylamide‐Based Polyampholyte Gels in Water

The swelling behavior of acrylamide (AAm)–based polyampholyte hydrogels in water and in aqueous salt (NaCl) solutions was investigated. [(Methacrylamido)propyl]trimethyl‐ammonium chloride (MAPTAC) and acrylic acid (AAc) were used as the ionic comonomer in the hydrogel preparation. Three sets of hydrogels containing 70 mol% AAm and 30 mol% ionic comonomers of varying mole ratios were prepared. The variations of the hydrogel volume in response to changes in pH, and salt concentration were measured. As pH increases from 1, the hydrogel volume V _eq in water first increases and reaches a maximum value at a certain pH. Then, it decreases again with a further increase in pH and attains a minimum value around the isoelectric point (IEP). After passing the collapsed plateau region, the gel reswells again up to pH=7.1. The reswelling of the collapsed gels containing 10 and 4% MAPTAC occurs as a first‐order phase transition at pH=5.85 and 4.35, respectively, while the hydrogel with 1% MAPTAC reswells continuously beyond its IEP. Depending on pH of the solution, the hydrogels immersed in salt solutions exhibit typical polyelectrolyte or antipolyelectrolye behavior. The experimental swelling data were compared with the predictions of the Flory‐Rehner theory of swelling equilibrium including the ideal Donnan equilibria. It was shown that the equilibrium swelling theory qualitatively predicts the experimental behavior of polyampholyte hydrogels.     

Oxidation of cobalt(II) with air oxygen in aqueous ethylenediamine solutions

Oxidation of aqueous Co(NO₃)₂–ethylenediamine (En) solutions with air oxygen was investigated at 20 °C and pH 5.2–7.0, with and without mechanical stirring, by measuring the Co^II concentration, pH and redox potential on an Au electrode. In most cases, the oxidation rate was proportional to the concentration of CoEn ²⁺ _n (n = 2, 3) complexes, and the influence of the solution pH on the rate of reaction was accounted for by the pH dependence of the Co^II complex distribution. It was found that sulphate inhibits and bromide accelerates the oxidation process. Possible oxidation routes are discussed. The oxidation process is limited to some extent by O₂ transport from the air to the bulk solution.     

Solution Characteristics for Adsorption of Copper Ion with Iron(III) Hydroxide from Aqueous Ammonia Solution

The distribution of copper ion species in aqueous ammonia solution is evaluated as a function of pH by a numerical approach. Adsorption of copper on colloidal iron(III) hydroxide in solutions of total ammonia (0.14-1.2 M) are performed at various values of pH. The maximum efficiency of adsorption occurs when the sum of the fractions of the species Cu(NH₃)²⁺, Cu(NH₃)₂²⁺ and Cu(NH₃)₃²⁺ in the solution reaches its maximum. With varied solution pH, the distribution of copper species is the determining factor for maximum adsorption, whereas the surface properties of the adsorbing particles show smaller effects under the test conditions.     

Primary Photoprocesses in a Fluoroquinolone Antibiotic Sarafloxacin†

The photophysical properties of the fluoroquinolone antibiotic sarafloxacin (SFX) were investigated in aqueous media. SFX in water, at pH 7.4, shows intense absorption with peaks at 272, 322 and 335 nm, (? = 36800 and 17000 dm³ mol^?1 cm^?1, respectively). Both the absorption and emission properties of SFX are pH‐dependent; pK_a values for the protonation equilibria of both the ground (5.8 and 9.1) and excited singlet states (5.7 and 9.0) of SFX were determined spectroscopically. SFX fluoresces weakly, the quantum yield for fluorescence emission being maximum (0.07) at pH 8. Laser flash photolysis and pulse radiolysis studies have been carried out in order to characterize the transient species of SFX in aqueous solution. Triplet–triplet absorption has a maximum at 610 nm with a molar absorption coefficient of 17,000 ± 1000 dm³ mol^?1 cm^?1. The quantum yield of triplet formation has been determined to be 0.35 ± 0.05. In the presence of oxygen, the triplet reacts to form excited singlet oxygen with quantum yield of 0.10. The initial triplet (³A*) was found to react with phosphate buffer to form triplet ³B* with lower energy and longer lifetime and having an absorption band centered at 700 nm. SFX triplet was also found to oxidize tryptophan to its radical with concomitant formation of the anion radical of SFX. Hence the photosensitivity of SFX could be initiated by the oxygen radicals and/or by SFX radicals acting as haptens.     

Electrochemical Behavior of Chloranil Chemically Modified Carbon Paste Electrode. Application to the Electrocatalytic Determination of Ascorbic Acid

A p‐chloranil modified carbon paste electrode was constructed and the electrochemical behavior of this electrode was studied in the aqueous solution with different pH. From the E_1/2–pH diagram for this compound the values of formal potential E^0' and pK_a of some different redox and acid‐base couples depending on the solution pH were estimated. The diffusion coefficient, D, value for p‐chloranil was estimated 1.5×10^?7 cm² s^?1. It has been shown by direct current cyclic voltammetry and double potential step chronoamperometry, that this p‐chloranil incorporated carbon paste electrode, can catalyze the oxidation of ascorbic acid in the aqueous buffered solution. Under the optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 325 mV less positive than that at an unmodified carbon past electrode. The catalytic oxidation peak currents was linearly dependent on the ascorbic acid concentration and a linear calibration curve was obtained in the range of 7×10^?5 M–4×10^?3 M of ascorbic acid with a correlation coefficient of 0.9998. The limit of detection (3σ) was determined as 3.5×10 ^?5 M. This method was used as simple, selective and precise voltammetric method for determination of ascorbic acid in pharmaceutical preparations.     

Kinetics of reductive stripping of Pu(IV) in the tributylphosphate-kerosene/nitric acid-water system using dihydroxyurea

The kinetics of the reductive stripping of plutonium(IV) by dihydroxyurea (DHU) in 30% TBP/kerosene-HNO₃ system was studied with a constant interfacial area cell. The stripping rate of plutonium(IV) increases with the increase of the stirring speed of two phases and the interfacial area. The activation energy of this process is 28.4 kJ/mol. Under the given experimental conditions, the mass transfer of Pu is not controlled by redox reaction, but controlled by molecular diffusion from the organic phase to organic film layer and from the aqueous film layer to aqueous phase. The rate equation of reductive stripping (process is controlled by diffusion) was obtained as: r ₀ = k′[Pu(IV)]₀[DHU]_a ^0.16[HNO₃]_a ^−0.34. The rate constant k′ is (5.0±0.4)·10⁻² (mol/L)^0.18·min⁻¹ at 18.0°C.     

Scavenging of UO2 2+ using 4-sulfonic calix[6]arene in the presence of goethite

The scavenging of UO₂ ²⁺ using 4-sulfonic calix[6]arene in the presence of a strong adsorbent was studied as a function of pH. The adsorbent selected was goethite because of its strong affinity for UO₂ ²⁺ and its abundance in natural soils. In order to understand the underlying chemistry of the scavenging process, the adsorption of UO₂ ²⁺ and 4-sulfonic calix[6]arene onto goethite, respectively, and the extraction of adsorbed UO₂ ²⁺ from goethite surface were modeled using the triple-layer model. The model well explained the pH dependence of the adsorption and extraction processes. This work showed that maximum extraction was obtained around pH 10.5 in the presence of 12g/l goethite in the case of a 1:3T _U(VI):T _calixareneratio.     

钴离子在P507为载体的支撑液膜中的传输

本文用国内的膜材料设计了以2-乙基已基膦酸单(2-乙基已基)酯(HEH(EHF),P_(507))为载体的支撑液膜迁移钴的实验,获得的数据为深入实验提供了依据.基本原理支撑液膜(SLM)是依靠微孔塑料薄膜(支撑体)微孔的毛细管作用将含萃取剂(载体)的有机溶液吸附在支撑体上.P_(507)萃取钴表示为:     

Importance of the diamine reactant in the production of polyphosphonamides by the interfacial technique

The stirred interfacial polycondensation of phenylphosphonic dichloride and 1,6-hexanediamine has been studied as a function of several reaction variables. The reaction is rapid, being completed in less than 1 min. When organic solvent is varied and reactant molar ratio is varied with an excess of the acid chloride, yield is constant. When reactant molar ratio is varied polymer yield increases with increase in amine concentration. When reactant concentration is increased yield increases. With the addition of a soluble salt in the aqueous phase yield is increased. The above indicates that the diffusion of the amine to the reaction zone is of primary importance in determining polymerization rate and that the diffusion of the acid chloride is relatively unimportant. Polymer yield was found to be dependent on the pH of the amine in the aqueous phase. The observed trend is related to the apparent solubility of the amine in the aqueous phase such that the greater the apparent solubility of the amine, the less the polymer yield. Polymer molecular weight is found to be independent of reaction variables tested. Polymer was also formed from the condensation of phenylphosphonic dichloride with p-phenylenediamine, H₂N-D-NH₂ (where D is a 36-carbon hydrocarbon chain), 1,3-di-4-piperidylpropane, and 4-aminomethylpiperidine; phenyl phosphorodichloridate with 1,6-hexanediamine; chloromethyl phosphonic dichloride with 1,6-hexanediamine.     

Water-soluble polymers. 71. pH responsive behavior of terpolymers of sodium acrylate,acrylamide, and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio)butanoate

Terpolymers of sodium acrylate (NaA), acrylamide (AM), and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio) butanoate (AMPDAB) were prepared by the free radical polymerization in 0.5M NaBr aqueous solution using potassium persulfate as the initiator. The feed ratio of AMPDAB : NaA : AM was varied from 5 : 5 : 90 to 40 : 40 : 20 mol %, with the total monomer concentration held constant at 0.45M. Terpolymer compositions were determined by ¹³C NMR. Molecular weights varied from 3.0 × 10⁵ to 9.7 × 10⁶ g/mol. All terpolymers were soluble in deionized water and salt solutions at all pH values. The dilute and semidilute solution behavior of the terpolymers was studied as a function of composition, pH, and added electrolytes. Polyelectrolyte behavior was observed for all terpolymers at pH 8.5, as evidenced by high viscosity values at low polymer concentrations and viscosity decrease in the presence of added electrolytes. The reduced viscosity as a function of decreasing pH exhibits a minimum as the terpolymer undergoes a polyanion/polyzwitterion/polycation transition. Comparison of the solution behavior of the terpolymers to terpolymers of 3-(2-acrylamido-2-methylpropane dimethylammonio)-1-propane sulfonate (AMPDAPS), AM, and NaA (AADAPS series) as well as copolymers of AMPDAB and AM (AMPDAB series) have been made. © 1997 John Wiley & Sons, Inc.     

Conformational study of phosphoserine in aqueous solution. I—13C n.m.r. results

¹³C chemical shifts and coupling constants of phosphoserine in aqueous solutions were studied as a function of pH values. Carboxyl and α-amino titration shifts agree with those observed in amino acids. The analysis of the coupling constants indicates that for rotation about the (C)? C? O? (P) axis the trans conformer predominates for all pH values. The fractional population of the gauche conformer reaches a maximum at pH=8.     

Polymerization of acrylonitrile: Kinetics of the reaction initiated by the Fe2+/BrO3− redox system

The aqueous polymerization of acrylonitrile initiated by the bromate—ferrous redox system in aqueous sulfuric acid was studied under nitrogen atmosphere. The rate of polymerization increased with increasing concentration of ferrous in the range of 0.25-1 × 10^?2M. The percentage of conversion increased with increasing concentration of the catalyst, but beyond 2.5 × 10^?3M there was a decreasing trend in the rate of polymerization. The rate varied linearly with [monomer]. The initial rate of polymerization as well as the maximum conversion increased within the range of 1–2.5 × 10^?3M KBrO₃, but beyond 2.5 × 10^?3M the rate of polymerization decreased. The initial rate and limiting conversion increased with increasing polymerization temperature in the range 30–40°C; beyond 40°C they decreased. The effect of certain neutral salts, water-miscible solvents, complexing agents, and copper sulfate concentration on the rate of polymerization was investigated.     

Extraction of acyclovir from pharmaceutical creams for HPLC assay. Optimization and validation of pretreatment protocols

Three simple protocols for the extraction of acyclovir from its pharmaceutical creams based on ultrasonication, ultrasonication with heating and magnetic stirring were evaluated and compared. Extraction kinetics were studied at different time intervals (5, 10, 15, 30 and 60 min) and the extraction efficiency was determined by HPLC. The effect of concentration of aqueous NaOH as the extraction medium and the stirring speed were also studied and optimized. Best results were obtained with 50 mL of 0.01 mol L⁻¹ aqueous NaOH with magnetic stirring speed of 500 r.p.m. HPLC analysis involved rapid separation of acyclovir from the cream matrix using a 100 × 4.6 mm i.d. monolithic column and UV detection at 254 nm. Magnetic stirring produced the best results in terms of extraction efficiency with an average extraction yield of 100.8%, n = 16 at an optimum extraction time of 15 min. The selected protocol was validated for within and day-to-day precision and ruggedness.      

Nature of the transient species formed in pulse radiolysis of n-allylthiourea in aqueous solutions

Reactions of e⁻_aq, OH radicals and H atoms were studied with n-allylthiourea (NATU) using pulse radiolysis. Hydrated electrons reacted with NATU (k = 2.8×10⁹ dm³ mol⁻¹ s⁻¹) giving a transient species which did not have any significant absorption above 300 nm. It was found to transfer electrons to methyl viologen. At pH 6.8, the reduction potential of NATU has been determined to be −0.527 V versus NHE. At pH 6.8, OH radicals were found to react with NATU, giving a transient species having absorption maxima at 400–410 nm and continuously increasing absorption below 290 nm. Absorption at 400–410 nm was found to increase with parent concentration, from which the equilibrium constant for dimer radical cation formation has been estimated to be 4.9×10³ dm³ mol⁻¹. H atoms were found to react with NATU with a rate constant of 5 × 10⁹ dm³ mol⁻¹ s⁻¹, giving a transient species having an absorption maximum at 310 nm, which has been assigned to H-atom addition to the double bond in the allyl group. Acetoneketyl radicals reacted with NATU at acidic pH values and the species formed underwent reaction with parent NATU molecule. Reaction of Cl^.−₂ radicals (k = 4.6 × 10⁹ dm³ mol⁻¹ s⁻¹) at pH 1 was found to give a transient species with λ_max at 400 nm. At the same pH, reaction of OH radicals also gave transient species, having a similar spectrum, but the yield was lower. This showed that OH radicals react with NATU by two mechanisms, viz., one-electron oxidation, as well as addition to the allylic double bond. From the absorbance values at 410 nm, it has been estimated that around 38% of the OH radicals abstract H atoms and the remaining 62% of the OH radicals add to the allylic double bond.     

Ionic liquid as hollow fibre membrane carrier for extraction of fluoroquinolone antibiotics in milk coupled with high-performance liquid chromatography quantification

A new hollow fibre liquid phase microextraction technology with an ionic liquid as the carrier was developed to determine the fluoroquinolone antibiotics in milk. In this technology, a porous polypropylene hollow fibre was filled with aqueous ionic liquid and the extraction efficiency of different factors, such as the type of hollow fibre membrane carrier, the pH and ionic strength of the donor solution, the pH of the acceptor solution, the stirring rate and the extraction time, were investigated. The optimised extraction condition was: [OMim][BF₄] impregnated in the pores of the hollow fibre; 0.1?mol?L^?1 of Na₂HPO₄ (pH 11.0) as the acceptor solution was injected into the lumen of the hollow fibre; 0.1?mol?L^?1 H₃PO₄ (pH 5.0) was used as the donor solution; 600?rpm was selected as the stirring rate; 120?min was the optimum extraction time. The proposed method provided very high factors with 130-fold, 156-fold and 116-fold enrichment of ofloxacin, ciprofloxacin and enrofloxacin, respectively.     

THE EFFECTS OF PORPHYRIN STRUCTURE AND AGGREGATION STATE ON PHOTOSENSITIZED PROCESSES IN AQUEOUS AND MICELLAR MEDIA

The efficiency of several porphyrins at 10 μM and 83 μM as sensitizers of the photooxidation of 0.1 mM tryptophan and histidine via a singlet oxygen-mechanism was studied in pH 7.4-buffered aqueous solutions and in aqueous dispersions of Triton X-100 micelles. The porphyrins were either solubilized in the bulk aqueous medium or associated with the micellar phase, whereas the amino acids were always located in the aqueous phase. With those porphyrins, such as uroporphyrin I, meso-tetra (4-sulfonatophenyl)porphine, meso-tetra(4-carboxyphenyl)porphine and meso-tetra)N,N,N-trimethylanilinium)porphine, which are > 98% monomeric in both media, the efficiency of histidine photooxidation was independent of the site of O₂(¹Δ_g) generation, as shown by the closely similar values for the photooxidation rate constant and oxygen-consumption quantum yield in the presence and absence of Triton micelles; the same indications were provided by photokinetic experiments with tryptophan. Actually, laser flash photolysis studies showed that the micelle-incorporation of the above mentioned porphyrins brought about only minor changes in their photophysical properties, including the relative yield of O₂(¹Δ_g) generation. On the other hand, hematoporphyrin IX, its Zn²⁺-complex, and coproporphyrin III are largely aggregated in homogeneous aqueous solution; their incorporation into Triton micelles caused an increase of the triplet quantum yield and an enhancement of the oxygen-consumption quantum yield and photooxidation rate constant for both histidine and tryptophan. The lower photosensitizing efficiency of aggregated porphyrin species in comparison with the corresponding monomeric porphyrin was confirmed by measuring the initial rate and quantum yield of oxygen consumption upon irradiation of 1 mM histidine and tryptophan in the presence of different hematoporphyrin concentrations within the 0.3-100μM range.