Radical terpolymerization of sulfur dioxide,styrene, and methyl methacrylate

The radical terpolymerization of sulfur dioxide, styrene, and methyl methacrylate in o-dichlorobenzene with 2,2′-azobisisobutyronitrile was carried out in order to clarify the propagation mechanism of the radical copolymerization of sulfur dioxide and styrene, especially as a function of total concentration of sulfur dioxide and styrene. From the analysis of the trigonal composition diagrams it has been definitely shown that the radical copolymerization of sulfur dioxide and styrene proceeds by the propagation of two monomers, but the usual type of copolymerization mechanism, explicable in terms of the Lewis-Mayo equation, is not applicable to this copolymerization. The participation in the propagation of a monomer charge-transfer complex consisting of sulfur dioxide and styrene was also ruled out.     

Terpolymerization of sulfur dioxide or maleic anhydride with unsaturated compounds under ultraviolet irradiation

The effect of ultraviolet irradiation on the terpolymerization was investigated. In the terpolymerizations of sulfur dioxide–butene-1–acrylonitrile, sulfur dioxide–butene-1–n-butyl acrylate, and maleic anhydride–allyl chloride–acrylonitrile systems, the composition of the terpolymers prepared under ultraviolet irradiation was different from those prepared in the dark. The unit content of sulfur dioxide and butene-1 or of maleic anhydride and allyl chloride in the terpolymer increased under ultraviolet irradiation. The nature of the growing end under ultraviolet irradiation is supposed to be the same as that of the dark polymerization on the basis of the same solvent effect on the terpolymer composition, the rate of polymerization and the molecular weight of polymer. The experimental results suggest that the complex between sulfur dioxide and butene-1 or maleic anhydride and allyl chloride might be excited by ultraviolet light and the excited complex may participate in the terpolymerization.     

Effect of ultraviolet irradiation on terpolymerization of sulfur dioxide with two unsaturated compounds

The terpolymerization of sulfur dioxide, butene-1 and acrylonitrile affords terpolymers containing equimolar amounts of sulfur dioxide and butene-1 with various acrylonitrile contents. Ultraviolet irradiation was found to accelerate the polymerization and decrease the acrylonitrile content in the polymer. This fact is interpreted by a mechanism through a copolymerization of sulfur dioxide–butene-1 complex and acrylonitrile, whereby the polymerizability of sulfur dioxide–butene-1 complexed monomer may be accelerated by ultraviolet light. In fact, a binary system of sulfur dioxide and butene-1 was found to be accelerated by ultraviolet irradiation, and it affords a maximum rate at a 1:1 composition of feed monomer. Ultraviolet light of 250–300 mμ wavelength is effective for the initiation and the propagation. This may be ascribed to the ultraviolet absorption of the sulfur dioxide–butene-1 complex. The temperature coefficient was measured in both dark and ultraviolet irradiation reactions. The ultraviolet irradiation enhances the reactivity of sulfur dioxide–butene-1 complexed monomer at low temperature. In the terpolymerization with sulfur dioxide, isoprene, and butadiene, the ratio of isoprene and butadiene in the terpolymer was not altered by ultraviolet irradiation because both monomers from complexes with sulfur dioxide, perhaps having the same temperature coefficient for the polymerization.     

High solids content emulsion terpolymerization of vinyl acetate,methyl methacrylate,and butyl acrylate. I. Kinetics

The kinetics of the high solids content emulsion terpolymerization of vinyl acetate, methyl methacrylate, and butyl acrylate were investigated. The effect of feed flow rate, total amount of emulsifier, distribution of emulsifier between the initial charge and the feed, concentration of initiator, and solids content on the time evolution of the conversion, terpolymer composition, and total number of polymer particles were investigated. The experimental results were analyzed by means of a mathematical model that incorporated the main features of the system. © 1994 John Wiley & Sons, Inc.     

Emulsion co- and terpolymerization of styrene,methyl methacrylate,and methyl acrylate. I. Experimental determination and model prediction of composition drift and microstructure in batch reactions

In Part I of this series the reactivity ratios of the comonomer pair methyl acrylate-methyl methacrylate were determined with low-conversion bulk polymerizations. It was shown that the binary reactivity ratios of the systems styrene-methyl acrylate, styrene-methyl methacrylate, and methyl acrylate-methyl methacrylate describe composition drift in low-coversion bulk terpolymerizations with these monomers reasonably well. A computer model was developed to simulate the composition drift in emulsion co- and terpolymerizations. The composition drift in two batch emulsion copolymerization systems (styrene-methyl acrylate and methyl acrylate-methyl methacrylate) and one emulsion terpolymerization system (styrene-methyl acrylate-methyl methacrylate) was investigated both experimentally and with the model. Experimental results were compared with model calculations. The copolymer chemical composition distributions (CCD) were determined with gradient polymer elution chromatography (GPEC®). This technique was also used for the first time to obtain information about the extent of composition drift in emulsion terpolymerizations. Cumulative terpolymer compositions were determined with ³H-NMR as a function of conversion and with this information the three-dimensional CCD was obtained. The composition drift was analyzed with respect to free radical copolymerization kinetics (reactivity ratios) and monomer partitioning. It was shown that in most emulsion copolymerizations the composition drift is mainly determined by the reactivity of the monomers and to a lesser extent by monomer partitioning, except in systems where there is a large difference in water solubility. The model predictions for cumulative terpolymer composition as a function of conversion and the three-dimensional terpolymer CCD showed excellent agreement with the experiments. The GPEC® elution chromatogram of the terpolymer was found to be in accordance with the predicted CCD and the experimentally determined CCD. © 1996 John Wiley & Sons, Inc.     

稀土三元催化剂催化二氧化碳/环氧丙烷/环氧环己烷的三元共聚合研究

在稀土三元催化剂(三氯乙酸稀土配合物/二乙基锌/甘油)催化下实现了二氧化碳、环氧丙烷及环氧环己烷的三元共聚合.该催化剂对二氧化碳与环氧环己烷共聚的催化活性比对二氧化碳与环氧丙烷共聚的高.增加反应单体中环氧环己烷的比例可提高共聚物中环己撑碳酸酯的含量,大幅度改善共聚物的耐热性.     

甲基丙烯酸甲酯-苯乙烯-N-苯基马来酰亚胺三元共聚物的研究

 研究了甲基丙烯酸甲酯-苯乙烯-N-苯基马来酰亚胺三元共聚体系的组成以及分子量分布对共聚物的耐热及物理机械性能的影响.实验结果表明:在一定条件下如果适当控制混合单体比例,可望获得一种综合性能较优越的共聚物材料.     

甲基丙烯酸甲酯-苯乙烯-N-苯基马来酰亚胺三元共聚物的研究

研究了甲基丙烯酸甲酯-苯乙烯-N-苯基马来酰亚胺三元共聚体系的组成以及分子量分布对共聚物的耐热及物理机械性能的影响.实验结果表明:在一定条件下如果适当控制混合单体比例,可望获得一种综合性能较优越的共聚物材料.     

Synthesis of poly(carbon monoxide-co-ethylene-co-hexene) with supported palladium catalysts

The effect of conditions of carbon monoxide terpolymerization with ethylene and 1-hexene on the yield and composition of the terpolymer is investigated. The reaction is first carried out in toluene with the use of a supported palladium catalyst at different molar ratios of the olefins in the reaction solution. An increase in the hexene-to-ethylene molar ratio from 0.2 to 2.9 is accompanied by a decrease in the yield of the terpolymer by a factor of 2.8 and by a small increase in the molar fraction of hexene units in the terpolymer from 0.02 to 0.005?C0.06. The dependence of the amount of hexene units in the terpolymer on the olefin ratio differs from that obtained earlier in terpolymerization with propylene.     

甲基丙烯酸甲酯、苯乙烯与顺丁烯二酸二丁基锡三元共聚物的合成与表征

以过氧化苯甲酰(BPO)为引发剂,将顺丁烯二酸二丁基锡(DBTM)与苯乙烯(St)、甲基丙烯酸甲酯(MMA)进行本体三元共聚反应,探讨了共聚反应条件.用液相色谱、红外光谱、核磁共振氢谱和热重分析对共聚物的结构和性能进行了表征.动态热流变性实验结果表明,在含锡量相同的情况下,共聚物对PVC的热稳定效果优于DBTM,可以作为多功能化的PVC热稳定剂.     

光敏感三元共聚物的合成及溶液自组装

以一端为肉桂酸酯光交联基元、中间为聚己内酯长柔性链的甲基丙烯酸酯类大单体FM5C为第三单体,与马来酸酐(MAH)及苯乙烯(St)单体以AIBN引发共聚合,制备了光敏感三元共聚物P(FM5C-co-MAH-co-St).该三元共聚物可在选择性溶剂中形成纳米胶体粒子,并可先利用肉桂酸酯基元的光照交联作用使胶体粒子内聚合物交联,进而利用羧酸酐基元与2-氨基吡啶的室温氨解反应改变胶体粒子形态.用FTIR、GPC、1H-NMR等对该聚合物及其氨解产物进行了结构表征.用动态激光光散射(DLS)、透射电镜(TEM)、芘探针等技术研究了该聚合物胶体粒子微观形态、粒径与微环境在光照交联后及氨解后的变化.实验结果表明,P(FM5C-co-MAH-co-St)在选择性溶剂中可自组装成球形胶体粒子,肉桂酸酯光照交联作用使胶体粒子中的聚合物团聚得更加紧密,从而使其粒径更小、疏水区域更加集中;而进一步的室温氨解反应则使聚合物胶体粒子更松散、粒径变大.     

Emulsion terpolymerization of butyl acrylate/methyl methacrylate/vinyl acetate: Experimental results

A systematic study of the terpolymerization of butyl acrylate/methyl methacrylate/vinyl acetate (BA/MMA/VAc) was conducted. In this stage of the study, batch emulsion terpolymerizations were performed in a 5 L stainless steel pilot plant reactor. The experiments were designed using a Bayesian (optimal) technique. The polymers produced were characterized for conversion, composition, molecular weight, and particle size. Conversion, terpolymer composition, number- and weight-average molecular weight, and average particle size results are discussed in light of the influence of seven factors and the interaction of these factors. The factors studied include monomer feed composition, initiator concentration, chain transfer agent concentration, impurity concentration, initiator type, emulsifier concentration, and temperature. A “two-stage rate” phenomenon, similar to that occurring in bulk co- and terpolymerization and emulsion copolymerization of acrylic/vinyl acetate systems was observed in the conversion, composition and molecular weight data. Furthermore, an interesting yet often ignored effect of impurities on emulsion polymerization kinetics was explained. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1659–1672, 1997     

氧化环己烯连续进料下二氧化碳-环氧丙烷-氧化环己烯三元共聚物的合成

由于氧化环己烯（CHO）与二氧化碳的共聚反应速度比其与环氧丙烷（PO）快,这种竞聚率的差异导致一锅法所得的二氧化碳-环氧丙烷-氧化环己烯三元共聚物的组成难以稳定控制。 为此本文在稀土三元催化剂下,采用氧化环己烯单体连续进料的方法合成了二氧化碳-环氧丙烷-氧化环己烯三元共聚物,催化效率可达575 g/(mol Zn h)。 三元共聚物的玻璃化转变温度随CHO含量升高而增大,当CHO的摩尔投料比从0.19增加到0.59时,玻璃化温度从44.3 ℃提高到70.1 ℃。 CHO连续进料合成的三元共聚物的组成与投料比基本相近,且连续进料法所合成的三元共聚物只有一个玻璃化转变温度,而普通的一锅法所得的三元共聚物通常存在两个玻璃化转变温度,因此连续进料法是制备组成稳定的二氧化碳-环氧丙烷-氧化环己烯三元共聚物的有效方法。     

Pulsed laser terpolymerization of styrene,methyl methacrylate and methyl acrylate

The propagation rate coefficient of the terpolymerization of styrene, methyl methacrylate and methyl acrylate in bulk was successfully determined at three different monomer compositions. The temperature was varied between 18 and 80°C. The resulting data at 50°C were not in agreement with predictions according to the terminal model with binary reactivity ratios that have been determined by fitting copolymer composition data with the terminal model. This indicates that here also the penultimate unit affects the kinetics.     

Poly(alkylene oxide) ionomers. XIII. Copolymers of trioxane with the epoxide and 1,3-dioxolane of methyl 10-undecenoate

Cationic copolymerization of 1,3,5-trioxane with methyl 10,11-epoxyundecanoate or methyl 7,8-epoxyoctanoate and terpolymerization with 1,3-dioxolane was successfully carried out. Co-and terpolymerization of 1,3,5-trioxane with 4-(1-carbomethoxynonyl)-1,3-dioxolane was also achieved. Feed compositions of the functional comonomers were varied from 5 to 40 mol %; in all cases the isolated copolymers contained less than 5% of the functional mer units. The composition of the copolymers showed that the methyl ω-epoxyalkanoates were much less reactive than 1,3,5-trioxane. A similar trend was observed with the functional dioxolane monomer, although significantly shorter induction periods were observed in comparison with the epoxy/trioxane copolymerizations. The oxymethylene copolymers and terpolymers were characterized primarily by their infrared spectra; however, the thermal and base stabilities of selected copolymers were also determined.     

Terpolymerization of acrylonitrile,styrene, and 2,4,6-tribromophenyl acrylate

Acrylonitrile was terpolymerized with styrene and 2,4,6-tribromophenyl acrylate in aqueous emulsion and dimethylformamide solution. Experimental terpolymerization data agreed well with calculations based on the Alfrey–Goldfinger equation. Triangular coordinate graphs show the feed/terpolymer relationships; the lines of unique and binary azeotropic compositions were identified. No points of true azeotropic composition were found but a “pseudo-azeotropic” region was recognized. The experimental data of the emulsion terpolymerization experiment agreed well with the theoretical curves over a wide range of monomer compositions up to high conversions. Incorporation of 2,4,6-tribromophenyl acrylate in the terpolymer decreased the thermal stability but improved the flame retardancy of the terpolymers.     

稀土配位催化马来酸酐-苯乙烯-N-苯基马来酰亚胺三元共聚合

采用稀土配位催化剂研究了马来酸酐、苯乙烯和N 苯基马来酰亚胺的三元共聚合反应 .考察了Al La物质的量的比、不同稀土元素、催化剂浓度、聚合反应时间、单体配比等因素对共聚合反应的影响 .利用核磁、红外、热分析等方法对共聚物进行了初步的表征     

New polymeric based materials: terpoly(aniline,diphenyl amine,and o‐anthranilic acid) / kaolinite composites

Terpolymers of aniline, diphenyl amine and o‐anthranilic acid (PANIDPAA) / kaolinite clay composites were synthesized by 1:1:1 molar ratios of the respective monomers with different percentages of kaolinite clay particles via in situ chemical terpolymerization. The spectral characteristics upon incorporation of o‐anthranilic acid and diphenyl amine units into the polyaniline backbone in presence of kaolinite clay were investigated. The results were justified by measuring the UV–Vis absorption spectra, FT‐IR for PANIDPAA emeraldine base (EB), and PANIDPAA EB / kaolinite clay composite. Also, the thermal gravimetric analyses for the isolated terpolymer powder in the bulk in absence and in presence of kaolinite clay were carried out. Moreover, the morphology of the polymer clay composites system was studied by the scanning electron microscope micrographs at different magnifications. X‐ray diffraction was used to measure the nature of polymer and extent of crystallinity present in the neat terpolymer and terpolymer / kaolinite composite materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Terpolymerization of ethyl methacrylate,N‐phenylmaleimide,and itaconic acid

The terpolymerization of ethyl methacrylate (EMA), N‐phenylmaleimide (NPMI), and itaconic acid (IA) was investigated. The terpolymer composition was determined by elemental analysis and ¹H NMR spectroscopy. The reactivity ratios of the three binary systems (EMA/NPMI, EMA/IA, and NPMI/IA) were calculated and used for the calculation of the terpolymer composition with the terminal model equations. A comparison between the experimental and theoretical compositions was made. The rate of the terpolymerization process was measured dilatometrically at two total monomer concentrations; this was done to establish the presence of intermolecular interactions between the investigated monomers. The thermal analysis of the obtained terpolymers was performed by thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3180–3187, 2003     

A simplification of the terpolymerization equation

The terpolymerization composition equation has been modified to eliminate the consideration of interactions between monomers 2 and 3 when they are present in low concentration in the feed mixture relative to monomer 1. Terpolymers with a wide variety of comonomers and compositions have been synthesized and used to demonstrate that a simplified terpolymerization equation accurately predicts terpolymer composition.