New heterodimetallic cyclopentadienyl carbonyl complexes: crystal structure of (C5Me4Et)(μ-CO)3Ru(C5Me5)

A series of heterodimetallic complexes of general formula (C₅R₅)M(μ-CO)₃RuC₅Me₅ (M = Cr, Mo, W; R = Me, Et) has been prepared in good yields by the reaction of [C₅R₅M(CO)₃]⁻ with [C₅Me₅Ru(CH₃CN)₃]⁺. (C₅Me₄Et)W(μ-CO)₃Ru(C₅Me₅) was characterized by a crystal structure determination. The W---Ru bond length of 2.41 Å is consistent with the formulation of a metal-metal triple bond, while the unsymmetrical bonding mode of the three bridging carbonyl groups reflects the inherent non-equivalence of the two different C₅R₅M-units. Using [CpRu(CH₃CN)₃]⁺ or [CpRu(CO)₂(CH₃CN)]⁺ as the cationic precursor leads to the formation of dimetallic species (C₅R₅)M(CO)₅RuC₅H₅ with both bridging and terminal carbonyl groups.     

Synthesis, structure and some reactions of (C5Me4hex)2Ru2(CO)4

The synthesis of the new cyclopentadiene, C₅Me₄(hex)H is described and its reaction with Ru₃(CO)₁₂ to yield (C₅Me₄hex)₂Ru₂(CO)₄ (hex = n-hexyl) is reported. The X-ray crystal structure of the dimer confirms the structure with bridging and terminal CO groups. Reactions of the dimer to yield (C₅Me₄hex)Ru(CO)₂X (X = Cl, Br, I) are reported. IR, NMR and mass spectra are reported for all new compounds. The solubility of the dimer is found to be 10 times greater than that for (C₅Me₅)₂Ru₂(CO)₄.     

Selective formation of trans and cis(CH3CN) isomers of [Ru(bpy)(CO)2(CH3CN)2] (bpy=2,2-bipyridine) from [Ru(CO)2(CH3CN)3]2(PF6)2 using an electrochemical oxidation step

The selective in situ synthesis of trans and cis(CH₃CN)-[Ru(bpy)(CO)₂ (CH₃CN)₂]²⁺ isomers from the same [Ru(CO)₂ (CH₃CN)₃]₂²⁺ dimer precursor but using either an electrochemical-chemical or chemical-electrochemical process is described.     

Some additional aspects of versatile starting compounds for cationic organoiron complexes: molecular structure of the aqua complex [(η-C5Me4Et)Fe(CO)2(OH2)]BF4 and solution behavior of the THF complex [(η---C5R5)Fe(CO)2(THF)]BF4

The structures of the versatile starting compounds for organoiron complexes, the cationic aqua complex [(η⁵-C₅Me₄Et)Fe(CO)₂(OH₂)]BF₄ (1b) and the halide complexes (η⁵-C₅Me₅)Fe(CO)₂-I (2a), (η⁵-C₅Me₄Et)Fe(CO)₂-I (2b) and (η⁵-C₅Me₄Et)Fe(CO)₂-Cl (3b), are characterized by X-ray crystallography. Complex 1b [Fe---O: 2.022(8) Å and 2.043(9) Å, two independent molecules] is the first structurally characterized example of organoiron aqua complexes. Details of the synthetic procedures for the above complexes and the labile cationic THF complexes [η⁵-C₅R₅)Fe(CO)₂(THF)]BF₄ (4) are disclosed, and the dissociation equilibrium of 4 is confirmed by means of variable temperature ¹H-NMR as well as saturation transfer experiment.     

Complexation and aromatization of α,β-unsaturated cyclic ketones by Ru(H2O)6 and (Bz)Ru(H2O)3: molecular structure of (η-Tosylate)(η-hydroxycyclopentadienyl)Ru and of (η-Tosylate)(η-1,4-dihydroxy-2,3,5,6-tetramethylbenzene)Ru

Ruaq²⁺(OTs)₂ complexes in aqueous solution to unsaturated cyclic ketones. These aromatized on heating to π-arene Ru complexes. Thus, with cyclohexonone the main product was Ru(η⁶-phenol)₂²⁺, 4, along with some Ru(η⁶-phenol)(η⁶-OTs)⁺, 6. Similarly gave cyclopentenone in the presence of various arenes Ru(η⁵-hydroxycyclopentadienyl)(η⁶-arene)⁺. Duruquinone complexed to Ruaq²⁺ as a monoprotanated hydroquinolate in Ru(η⁶-2,3,5,6-tetramethyl-1,4-hydroquinone)(η⁶-OTs), 14. Ru(η⁵-cyclopentadienyl)(η⁶-OTs), 8, and 14 were characterized by single crystal x-ray structure analyses, data see Table 1. Whereas both ligands in 8 are planar, the 1,4-hydroquinone ligand in 14 shows distinct bending of the COH groups.     

Preparation and characterization of rhenium (I) tricarbonyl dithiocarbamate compounds; Re(CO)3(S2CNMe2)(L)

The title compounds were prepared in good yield by treatment of Re(CO)₅Cl or [Re(CO)₃(H₂O)₃]Br with sodium dimethyldithiocarbamate hydrate (NaS₂CNMe₂·H₂O) and a neutral ligand yielding eight Re(CO)₃(S₂CNMe₂)(L) derivatives: L = NH₃1, pyridine (py) 2, imidazole (im) 3, pyrazole (pz) 4, triphenylphospine (PPh₃) 5, 1,3,5-triaza-7-phosphaadamantane (PTA) 6, t-butyl isocyanide (t-BuNC) 7, and cyclohexyl isocyanide (CyNC) 8. The resulting new complexes were characterized by ¹H and ¹³C NMR and infrared spectroscopy. Each was also structurally elucidated by X-ray crystallography. General structural features in all eight compounds were similar. The orientation of the three single-faced ligands, py, im and pz, demonstrates an interaction with the filled π orbital of the dithiocarbamate. Compounds were tested for stability under conditions that mimic physiological conditions; 1-4 quickly decomposed, 7 and 8 decomposed over 24 h while 5 and 6 were stable.     

Synthesis and crystal structure of [Ru8(μ5-S)2(μ4-S)(μ3-S)(μ-CNMe2)2(μ-CO)(CO)15] formed via the double sulphur-carbon bond cleavage of dithiocarbamate ligands

Heating cis-[Ru(S₂CNMe₂)₂(CO)₂] and [Ru₃(CO)₁₂] in xylene affords octanuclear [Ru₈(μ₅-S)₂(μ₄-S)(μ₃-S)(μ-CNMe₂)₂(μ-CO)(CO)₁₅] resulting from the double carbon-sulfur bond cleavage of two dithiocarbamate ligands. The structure consists of a tri-edge-bridged square of ruthenium atoms with a further ruthenium atom being bound only to the central bridging atom. Studies suggest that it may be formed via the pentanuclear intermediate [Ru₅(μ₄-S)₂(μ-CNMe₂)₂(CO)₁₁] which is formed in trace amounts.     

Electrochemical reduction of the dithiophosphate complexes CpFe(CO)2[η-SP(S)(OR)2], (Cp = η-C5H5 or η-C5Me5)

The reductive electrochemistry of compounds of the type CpFe(CO)₂L (Cp = η-C₅H₅, η-C₅Me₅; L = SP(S)(OEt)₂, SP(S)(OⁱPr)₂) has been examined by polarography, cylic voltammetry and coulometry. The first one-electron reduction step leads to a bond rupture process with formation of a mercury compound, [CpFe(CO)₂]₂Hg, at a mercury electrode and the corresponding dimer species at a platinum electrode. The second reduction step corresponds to the reduction of the dimer [CpFe(CO)₂]₂, except in the polarographic reduction of pentamethylcyclopentadienyl compounds.     

Syntheses, structure characterisation and X-ray studies of some mono, di- and tri-substituted cluster complexes of Ru3(CO)12 substituted by bulky fluorinated phosphine ligands

Five trinuclear substituted complexes of the type Ru₃(CO)₁₁L, Ru₃(CO)₁₀L₂ and Ru₃(CO)₉L₃ were synthesised by the reaction of Ru₃(CO)₁₂ with fluorine substituted phosphine ligands, {P(C₆H₄F-m)₃ and P(C₆H₄F-p)₃}, using the radical anion catalysed method. The structures of the resulting clusters were elucidated by means of elemental analyses and spectroscopic methods, which included IR, ¹H, ¹³C and ³¹P NMR spectroscopy. X-ray crystallographic studies of four of the complexes were carried out. In all the complexes, the ligand occupies an equatorial position due to steric reasons, and coordination of the ligand is observed only at the phosphorus atom. In the two monosubstituted complexes, Ru₃(CO)₁₁P(C₆H₄F-m)₃ and Ru₃(CO)₁₁P(C₆H₄F-p)₃, the effect of substitution resulted in an increase in the Ru-Ru distances. Out of the three Ru-Ru bonds, the one which is cis to the ligand is noticeably longer than the other two. The asymmetric unit of the disubstituted complex Ru₃(CO)₁₀{P(C₆H₄F-p)₃}₂ is composed of two molecules, A and B. As expected, the two phosphorus ligands are equatorially bonded to two different ruthenium atoms. The asymmetric unit of the trisubstituted complex is composed of one molecule of Ru₃(CO)₉{P(C₆H₄F-m)₃}₃ and one disordered solvent molecule. The structure consists of one triangular ruthenium complex in which each of the phosphorus ligands is equatorially bonded to three different ruthenium atoms. In the structure, disorder of the fluorine atoms is observed. Bond parameters, especially bond lengths and bond angles, are correlated to the structure and also are compared with the literature data of similar compounds.     

A novel cis-push–pull effect in cycloruthenated azobenzene thiocarbonyl-containing complexes: crystal and molecular structures of [RuX(CS)(η-C,N-C6H4N=NPh)(PPh3)2](X=Cl, I)

Treatment of [RuHCl(CS)(PPh₃)₃] with Hg(o-C₆H₄N=NC₆H₅)₂ affords [RuCl(CS)(η²C,N-o-C₆H₄N=NC₆H₅)(PPh₃)₂] (1) in good yield, where the cyclometallated azobenzene ligand coordinates through an ortho-C and one azo-N to give a five-membered chelate ring. Reaction of 1 with AgNO₃ followed by NaBr or NaI affords the chloride-exchanged products [RuX(CO)(η²C,N-o-C₆H₄N=NC₆H₅)(PPh₃)₂] (2, 3), whereas reaction of 1 with AgOC(O)Me or NaS₂CNEt₂·2H₂O gives the halide mono-phosphine-substituted complexes [Ru(CS)(LL)(η²C,N-o-C₆H₄NNC₆H₅)(PPh₃)] (4, 5). In the solid-state structures of 1 and 3 there are significant changes in the bond lengths for the cyclometallated azobenzene ligand are observed relative to free azobenzene. These are discussed, with the aid of spectroscopic and crystallographic data, in terms of a cis-push–pull effect.     

An improved synthetic method and vibrational study of (pentamethylcyclopentadienyl) dicarbonylrhenium dihalides (η-C5Me5)Re(CO)2X2 (X = C1, Br and I)

An improved synthetic method has been found for the preparation of the pentamethylcyclopentadienyl rhenium dicarbonyldihalide complexes. From the reaction of (η⁵-C₅Me₅)Re(CO)₃ with Br₂ or I₂ in THF-H₂O a mixture of cis and trans isomers of (η⁵-C₅Me₅)Re(CO)₂X₂ X = Br and I is formed. On the other hand, the reaction of [(η⁵-C₅Me₅)Re(CO)₃C1][SbC1₆] in water gives the cis-(η⁵-C₅Me₅)Re(CO)₂C1₂ complex. The solid IR spectra of the dicarbonyldihalide complexes are recorded and an assignment of the normal modes in terms of local symmetry is suggested by comparison with those observed in analogous molecules. A normal coordinate analysis performed using a modified general valence force field and considering simplified models, confirms most of the experimental assignments. The set of valence force constants reflects the structure of the isomers under study.     

Formation of (η-R5C5)Ru(NO)X2 by the nitrosylation of (η-R5C5)Ru(CO)2X under irradiation

The ruthenium(II) complexes (η-R₅C₅)Ru(CO)₂X with R = H, CH₃ and X = Cl, Br, I undergo a facile reaction with nitric oxide under UV irradiation to afford ruthenium(IV) nitrosyl derivatives of the general type (η-R₅C₅)Ru(NO)X₂.     

Synthesis and structural characterization of (μ-H)2RU3(CO)9(μ3-η-C8H12) and (μ-H)RU3(CO)9(μ3-η-C12H19)

The reaction between Ru₃(CO)₁₂ and a cyclic olefin (cis-cyclooctene or trans-cyclododecene) at 100 °C for several hours gives the title compounds (μ-H)₂RU₃(CO)₉(μ₃-η²-C₈H₁₂) (1), and (μ-H)RU₃(CO)₉(μ₃-η³-C₁₂H₁₉) (2), both of which have been characterized by X-ray diffraction studies, IR and NMR spectral measurements and elemental analysis. The prolonged reaction between Ru₃(CO)₁₂ and cis-cyclooctene gives compound HRu₃(CO)₉(C₈H₁₁) (3). Compound 3 has been characterized with IR and NMR spectral analyses. In 1 the cyclooctene ring is linked via a μ₃-η²-alkyne type of bonding to the face of the Ru₃ cluster. It is formally σ-bonded to two of the three Ru atoms and π-bonded to the third Ru. The two hydrides in 1 are bridging Ru---Ru bonds. In 2 the cyclododecene ring is bonded to the Ru₃ face via the μ₃-η³-CCHC linkage. There are two formal σ-bonds from the allyl part to the hydrido-bridged Ru atoms and the η³-allyl linkage to the third Ru atom.     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

Mixed-metal cluster chemistry Part 20. Syntheses, crystal structures and electrochemical studies of W2Ir2(μ-L)(CO)8(η-C5H4Me)2 (L=dppe, dppf)

The 60-electron tetrahedral clusters W₂Ir₂(μ-L)(CO)₈(η⁵-C₅H₄Me)₂ [L=dppe (2), dppf (3)] have been prepared from reaction between W₂Ir₂(CO)₁₀(η⁵-C₅H₄Me)₂ (1) and the corresponding diphosphine in 52 and 66% yields, respectively. A structural study of 2 reveals that three edges of a WIr₂ face are spanned by bridging carbonyls, that the iridium-ligated diphosphine coordinates diaxially and that the tungsten-bound methylcyclopentadienyls coordinate axially and apically with respect to the plane of bridging carbonyls. A structural study of 3 reveals that the dppf ligand bridges an Ir---Ir bond which is also spanned by a bridging carbonyl; tungsten-ligated methylcyclopentadienyl ligands and terminal carbonyls result in electronic asymmetry (17e and 19e iridium atoms) in the electron-precise cluster. Both clusters show two reversible one-electron oxidation processes and an irreversible two-electron reduction; the dppf-containing cluster 3 has a further, irreversible, one-electron oxidation process. UV–vis-NIR spectroelectrochemical studies of the 2→2⁺→2²⁺ progression reveal the appearance of a low-energy transition on oxidation to 2⁺ which persists on further oxidation to 2²⁺.     

Magnetism of the praseodymium halide thiosilicates Pr3X[SiS4]2 (X=Cl, Br, I)

The magnetism of the three compounds Pr₃X[SiS₄]₂ (X=Cl, Br, I) has been measured in the temperature range between 1.7 and 300 K. For the theoretical calculations to interpret the magnetic behavior the angular overlap model was employed to reproduce the ligand field influence and the molecular field approach to take magnetic interaction into account.     

Reactions of the cationic diruthenium carbonyl complex [Ru2(μ-dppm)2(CO)4(μ,η-O2CMe)] with bidentate ligands; intramolecularly assisted stereospecific synthesis via the second-sphere face-to-face π–π stacking interactions

The reactions of the diruthenium carbonyl complexes [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]X (X=BF₄⁻ (1a) or PF₆⁻ (1b)) with neutral or anionic bidentate ligands (L,L) afford a series of the diruthenium bridging carbonyl complexes [Ru₂(μ-dppm)₂(μ-CO)₂(η²-(L,L))₂]X_n ((L,L)=acetate (O₂CMe), 2,2′-bipyridine (bpy), acetylacetonate (acac), 8-quinolinolate (quin); n=0, 1, 2). Apparently with coordination of the bidentate ligands, the bound acetate ligand of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ either migrates within the same complex or into a different one, or is simply replaced. The reaction of [Ru₂(μ-dppm)₂(CO)₄(μ,η²-O₂CMe)]⁺ (1) with 2,2′-bipyridine produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)₂] (2), [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-bpy)]⁺ (3), and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-bpy)₂]²⁺ (4). Alternatively compound 2 can be prepared from the reaction of 1a with MeCO₂H–Et₃N, while compound 4 can be obtained from the reaction of 3 with bpy. The reaction of 1b with acetylacetone–Et₃N produces [Ru₂(μ-dppm)₂(μ-CO)₂(η²-O₂CMe)(η²-acac)] (5) and [Ru₂(μ-dppm)₂(μ-CO)₂(η²-acac)₂] (6). Compound 2 can also react with acetylacetone–Et₃N to produce 6. Surprisingly [Ru₂(μ-dppm)₂(μ-CO)₂(η²-quin)₂] (7) was obtained stereospecifically as the only one product from the reaction of 1b with 8-quinolinol–Et₃N. The structure of 7 has been established by X-ray crystallography and found to adopt a cis geometry. Further, the stereospecific reaction is probably caused by the second-sphere π–π face-to-face stacking interactions between the phenyl rings of dppm and the electron-deficient six-membered ring moiety of the bound quinolinate (i.e. the N-included six-membered ring) in 7. The presence of such interactions is indeed supported by an observed charge-transfer band in a UV–vis spectrum.     

Reactions of Cp Ru(η-C6H5CHO) OSO2CF3 (Cp = C5Me5) with substituted anilines forming ruthenium Schiff base complexes

Cp^* Ru(η⁶-C₆H₅CHO)⁺OSO₂CF₃⁻ (1) (Cp^* = C₅Me₅) reacts with substituted anilines forming ruthenium Schiff base complexes containing an η⁶-coordinated Cp^* Ru⁺ group. The 2:1 reaction of 1 with 1,4-phenylenediamine yielded only the monocondensation product, whereas the 2:1 reaction of 1 with 1,4-xylylenediamine yielded the dicondensation product.     

Electropolymerization of [Ru(bpy)(CO)2Cl2] (bpy=2,2′-bipyridine: a revisited trans versus cis(Cl) isomeric influence study

The mono-bipyridine bis carbonyl complex [Ru(bpy)(CO)₂Cl₂] exists in two stereoisomeric forms having a trans(Cl)/cis(CO) (1) and cis(Cl)/cis(CO) (2) configuration. In previous work we reported that only the trans(Cl)/cis(CO) isomer 1 leads by a two-electron reduction to the formation of [Ru(bpy)(CO)₂]_n polymeric film on an electrode surface. This initial statement was overstated, as both isomers allowed the build up of polymers. A detailed comparison of the electropolymerization of both isomers is reported here, as well as the reduction into dimers of parent stereoisomer [Ru(bpy)(CO)₂(C(O)OMe)Cl] complexes 3 and 4 obtained as side products during the synthesis of 1 and 2.