Thermodynamic study of poly(N-vinyl caprolactam) hydration at temperatures close to lower critical solution temperature

The lower critical solution temperature of aqueous solutions of poly(N-vinyl caprolactam) falls in the 305–307 K range and depends on the molecular weight of the polymer. The thermodynamic functions of mixing at 298 K have been calculated from measurements of vapor pressures and heats of dissolution and dilution. Partial Gibbs energy, partial enthalpy, and partial entropy of mixing were negative over the entire range of composition. Increasing temperature resulted in a decrease in the exothermal character of mixing. Excessive heat capacity values, calculated from the dependencies of enthalpy of mixing on temperature, were positive over the entire composition range. Heat capacity of dilute solutions was measured at 298 K and partial heat capacity of poly(N-vinyl caprolactam) at infinite dilution was shown to be positive. The data obtained point out the hydrophilic and hydrophobic hydration of poly(N-vinyl caprolactam) in aqueous solutions. Hydrophobic hydration dominates at temperatures close to binodal curve. As a result, the mutual mixing of the polymer with water is decreased and phase separation takes place.     

Nonlinear depression of the lower critical solution temperatures in aqueous solutions of thermo-sensitive random copolymers

We develop a theoretical model of cooperative hydration to clarify the molecular origin of the observed nonlinear depression of the lower critical solution temperature (LCST) in the aqueous solutions of thermosensitive random copolymers and find the monomer composition at which LCST shows a minimum. Phase diagrams of poly(N-isopropylacrylamide-co-N,N-diethylacrylamide) copolymer solutions are theoretically derived on the basis of the theory of cooperative hydration by introducing the microscopic structure parameter η which characterizes the distribution of the monomer sequences along the chains. We compared them with the experimental data of LCST of random copolymers with various monomer compositions and also of the diblock copolymers with equimolar monomer composition. The transition temperature shifts to lower than those of homopolymer counterparts when the monomer sequence of the chains has an alternative tendency. On the contrary, for the blocky polymers such as diblock copolymers, the transition temperature remains almost the same as those of the homopolymers. Thus, the nonlinear effect in phase separation appears when the average block length of the copolymers is shorter than the average sequence length of the cooperative hydration. The degree of hydration is calculated as a function of the temperature and polymer concentration for varied distribution of the copolymer compositions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1112–1123     

An amphiphilic polymer for the synthesis of diverse polymer libraries exemplified using conjugates with lower critical solution temperatures that span water's liquid state

The discovery of new polymer functions is intrinsically tied to the synthesis of diverse structures. Herein we report the synthesis of a new polymer library precursor, poly[N-(12-carboxyl-3,6,9-trioxado) methacrylamide] (pCTMAAm), that is functionalizable with hydrophilic or hydrophobic ligands in both protic and aprotic solvents. The polymer is made through RAFT polymerization with narrow dispersities. Carboxylic acid groups terminate the pCTMAAm side chains, which allows conjugation of both hydrophobic and hydrophilic groups. As a demonstration, three very different ligands, agmantine (cation), galactosamine (polyol) and hexylamine (hydrophobic), were conjugated to pCTMAAm using DMTTM as a condensing agent with greater than 80% conjugation efficiency. To demonstrate the potential utility of the amphiphilic polymer, a polymer library containing side chains with a series of alkanes and varying degrees of substitution was synthesized showing lower critical solution temperature (LCST) profiles that span a temperature range of 7 °C to above 90 °C in water. Multivariate linear regression analysis of the polymer library was used to understand how polymer composition correlates to LCST, using molecular weight, alkane length and degree of substitution as continuous variables. The outcome showed that alkane length has the greatest influence on LCST and that LCST can be estimated using these material composition inputs.     

Lower critical solution temperature (LCST) and theta temperature of aqueous solutions of nonionic surface active agents of various polyoxyethylene chain lengths

Cloud points of aqueous solutions of homogeneous poly(oxyethylene)dodecyl ether derivatives (C₁₂(OE)_n: n=2–8) and the apparent theta temperatureT ^ap were determined from the abrupt changes in optical transmittance and the temperature dependence of the second virial coefficient obtained by light scattering measurements. It was found that the lower critical solution temperature (LCST) shifts to a lower temperature and lower concentration as the number of oxyethylene units in a molecule decreases. Because of this behavior of LCST, the modified Flory-Schultz plot of phase separation was applied to the present nonionic surfactant-water system, and its theta temperature obtained. The dependence ofT ^ap on the number of oxyethylene units suggests that the polyoxyethylene chain has different effects on the solubility of C₁₂(OE)_n in water forn less than or equal to 3 from those forn greater than or equal to 4.     

A new thermo‐responsive block copolymer with tunable upper critical solution temperature and lower critical solution temperature in the alcohol/water mixture

The multi‐thermo‐responsive block copolymer of poly[2‐(2‐methoxyethoxy)ethyl methacrylate]‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PMEO₂MA‐b‐PVEA) displaying phase transition at both the lower critical solution temperature (LCST) and the upper critical solution temperature (UCST) in the alcohol/water mixture is synthesized by reversible addition‐fragmentation chain transfer polymerization. The poly[2‐(2‐methoxyethoxy)ethyl methacrylate] (PMEO₂MA) block exhibits the UCST phase transition in alcohol and the LCST phase transition in water, while the poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PVEA) block shows the UCST phase transition in isopropanol and the LCST phase transition in the alcohol/water mixture. Both the polymer molecular weight and the co‐solvent/nonsolvent exert great influence on the LCST or UCST of the block copolymer. By adjusting the solvent character including the water content and the temperature, the block copolymer undergoes multiphase transition at LCST or UCST, and various block copolymer morphologies including inverted micelles, core‐corona micelles, and corona‐collapsed micelles are prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4399–4412     

Lower critical solution temperature control and swelling behaviour of physically crosslinked thermosensitive copolymers based on N-isopropylacrylamide

In this contribution we have developed thermosensitive polymer matrices based on N-isopropylacrylamide (NIPAAm). Preparation of the hydrogels involved photopolymerisation of a combination of NIPAAm, 1-vinyl-2-pyrrolidinone (NVP) and distilled water, in appropriate amounts and contained a UV-light sensitive initiator called 1-hydroxycyclohexylphenylketone. As NIPAAm monomer could be readily dissolved in mixtures of liquid NVP and distilled water, the use of organic solvents was not required in the polymerisation process. Furthermore, chemical crosslinking agents are not needed in the synthesis. By alternating the feed ratio, hydrogels were synthesised to have lower critical solution temperatures (LCST) in the vicinity of 37 °C. This ability to shift the phase transition temperature of the gels provides excellent flexibility in tailoring transitions for specific uses. The transition temperature of the pseudo gels was established using cloud point measurement and modulated differential scanning calorimetry (MDSC). The chemical structure of the xerogels was characterised by means of Fourier transform infrared spectroscopy (Ftir), while swelling experiments in distilled water indicate that the swelling and dissolution behaviour of the gels is strongly temperature dependent.     

Lower critical solution temperature sensitivity to structural changes in poly(N‐isopropyl acrylamide) homopolymers

The effect of the molecular weight on the lower critical solution temperature (LCST) has been discussed extensively, where LCST increased with molar mass, decreased or kept constant, which leads to confusion. This work is focused on the preparation of poly(N‐isopropyl acrylamide) homopolymers, obtained in a wide molecular weights range. The LCST behavior is analyzed by calorimetry and rheology, and a deep study of molecular features is carried out for a better knowledge of the influence of various parameters involved on LCST. Finally, the molecular weight trend is observed, and its influence on LCST is compared with the effect of other parameters as polymer concentration in water, end‐group effect, and tacticity. It is observed that other parameters such tacticity and end‐group effect will affect the LCST behavior over molecular weight, if this one is not high enough. Furthermore, the study of the LCST ranges will be a useful tool for analyzing the molecular weight trends. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1386–1393     

Adsorption behavior of water soluble polymers with lower critical solution temperature

The adsorption behavior of hydroxylpropyl cellulose (HPC), ethyl hydroxylethyl cellulose (EHEC) and poly-vinylalcohol (PVA) polymers, which have a lower critical solution temperature (LCST), have been studied in comparison with the behavior of hydroxylethyl cellulose (HEC) with no LCST. The saturated amount of adsorption (A _s ) for the polymers with LCST depended significantly on the adsorption temperature and theA _s , e. g., for HPC obtained at the LCST, the amount was 1.5 times as large as the value at room temperature. The highA _s values obtained at the LCST were maintained over a long period at room temperature, and the dense adsorption layer formed on the latex particles at the LCST showed a strong protective action against flocculation. Furthermore, the effect of the surface nature of the adsorbent on the polymer adsorption at the LCST has been investigated using six kinds of synthetic latices with different surface natures. It was found that the hydrophobic interaction between the polymer and the adsorbent plays an important role in inducing the adsorption, and the trend of increasing the hydrophilic character of the latex surface prevents the formation of the adsorption layer of the polymer.     

Interfacial tension in a lower critical solution temperature blend: Effect of temperature,blend composition,and deformation of the interphase

Interfacial tension is a very important material parameter in two‐phase polymer blends. It determines the morphology development during processing, which is crucial for the end‐use properties of the material. Although different techniques for interfacial tension measurement give comparable results for immiscible polymers, the determination of the interfacial tension in lower critical solution temperature blends is not straightforward. This is illustrated for poly(α‐methyl styrene acrylonitrile)/poly(methyl methacrylate)(PαMSAN/PMMA), a slightly incompatible polymer pair. Interfacial tension has been measured with three different techniques: small‐amplitude oscillatory shear, recovery after elongation, and elongation of a multilayer sample. The large differences in these results can be attributed to the fact that most experimental techniques determine an apparent value, rather than the thermodynamic equilibrium value, of the interfacial tension. The latter is only obtained if the measurement is performed under quiescent conditions on a system that is composed of the coexisting PαMSAN‐rich and PMMA‐rich phases. The apparent interfacial tension depends on the actual composition of the phases and on the deformation of the interface. An order of magnitude approximation for such effects has been derived from theoretical considerations. Finally, each of these apparent values can be of practical importance. If a blend is prepared by melt mixing of the pure polymers, a high apparent value of interfacial tension should be considered. If, however, a blend is prepared by phase separation of a homogeneous mixture, the thermodynamic value is important. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 679–690, 2002     

A simple FTIR spectroscopic method for the determination of the lower critical solution temperature of N‐isopropylacrylamide copolymers and related hydrogels

Linear and crosslinked polymers based on N‐isopropylacrylamide (NIPAAm) exhibit unusual thermal properties. Aqueous solutions of poly(N‐isopropylacrylamide) (PNIPAAm) phase‐separate upon heating above a lower critical solution temperature (LCST), whereas related hydrogels undergo a swelling–shrinking transition at an LCST. A linear copolymer made of NIPAAm/acryloxysuccinimide (98/2 mol/mol) and two hydrogels with different hydrophilicities were prepared. Fourier transform infrared (FTIR) spectroscopy was employed to determine the transition temperature and provide insights into the molecular details of the transition via probing of characteristic bands as a function of temperature. The FTIR spectroscopy method described here allowed the determination of the transition temperature for both the linear and crosslinked polymers. The transition temperatures for PNIPAAm and the gel resulting from the crosslinking with polylysine or N,N′‐methylenebisacrylamide (MBA) were in the same range, 30–35 °C. For the gels, the transition temperature increased with the hydrophilicity of the polymer matrix. The spectral changes observed at the LCST were similar for the free chains and the hydrogels, implying a similar molecular reorganization during the transition. The C H stretching region suggests that the N‐isopropyl groups and the backbone both underwent conformational changes and became more ordered upon heating above the LCST. An analysis of the amide I band suggests that the amide groups of the linear polymer were mainly involved in hydrogen bonding with water molecules below the LCST, the chain being flexible and disordered in a water solution. During the transition, around 20% of these intermolecular hydrogen bonds between the polymer and water were broken and replaced by intramolecular hydrogen bonds. Similar changes were also observed at the LCST of a gel crosslinked with MBA. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 907–915, 2000     

Modeling of the θ(lower critical solution temperature) in polymer solutions using molecular connectivity indices

In this work, correlations for the estimation of the θ(lower critical solution temperature, LCST) for Polystyrene, Polyethylene, Polypropylene, Polybutene-1, Polypentene-1, Poly(4-methylpentene-1), Polydimethylsiloxane and Polyisobutylene solutions were proposed based on the molecular connectivity index. The correlations give satisfactory estimation of the θ(LCST), with the absolute error smaller than 20 K for most systems studied. Since the new correlations require only molecular connectivity indices of the solvent in the calculations, and the molecular connectivity indices can be calculated easily once the molecular structure of the substance concerned is known, they have better predictive capability and are easier to apply comparing with the existing methods and models.     

A pressure and temperature study on solubility and micelle formation of sodium perfluorodecanoate in aqueous solution

Both the critical solution temperature (CST, or the Krafft temperature) and the critical solution pressure (CSP, or the Tanaka pressure) were determined for sodium perfluorodecanoate (NaPFDe) in water, and the result shows that the Krafft temperature is raised with the increase in the Tanaka pressure. A thermodynamic analysis has been made on the data for the critical micellization concentration (cmc) and of the solubility at various temperatures and pressures. The estimated change in the partial molal volume, resulting from micelle formation from the singly dispersed state and from the hydrated solid state, was found to be conspicuously higher for NaPFDe compared to hydrocarbon surfactants. This has been ascribed to the more pronounced role of carbon chain-water interactions and water structure effects of the fluorocarbon surfactants.     

Liquid-liquid equilibria and theta temperatures in homopolymer-solvent solutions from a perturbed hard-sphere-chain equation of state

The perturbed hard-sphere-chain (PHSC) equation of state is used to calculate liquid-liquid equilibria of binary nonpolar solvent/homopolymer systems exhibiting both an upper critical solution temperature (UCST) and a lower critical solution temperature (LCST). Systems studied include polyisobutylene, polyethylene, and polystyrene solutions. Equation-of-state parameters of homopolymers are obtained by regressing the pressure-volume-temperature data of polymer melts. In polymer solutions, however, theory overestimates the equation-of-state effect which causes the LCST at elevated temperature. To correct the overestimated equation-of-state effect, an empirical adjustable parameter is introduced into the perturbation term of the PHSC equation of state. An entropy parameter is also introduced into the Helmholtz energy of the mixture to correlate quantitatively the dependence of critical temperatures on polymer molecular weight. For systems exhibiting a LCST, two adjustable parameters are required to obtain quantitative agreement of theoretical critical temperatures with experiment as a function of polymer molecular weight. For systems exhibiting both an UCST and a LCST, three adjustable parameters may be necessary. The need for so many empirical binary parameters is probably due to the oversimplified perturbation term which is based on the mean-field assumption. © 1996 John Wiley & Sons, Inc.     

Poly(ether tert‐amine): A novel family of multiresponsive polymer

A novel multiresponsive poly(ether tert‐amine) (PEA) was synthesized by nucleophilic addition/ring‐opening reaction of commercial poly(ethylene oxide) (PEO), poly(propylene oxide) (PPO), and di‐epoxy and di‐amine monomer. The process of synthesis was very simple and green in ethanol as reactive media. These PEAs exhibit sharp response to temperature, pH, and ionic strength, with adjustable and sharp phase transitions in the range of 27–100 °C. The lower critical solution temperature (LCST) of PEA's aqueous solution presents a linear relationship to the PEO content (y = 35.7 + x), indicating well‐tunable LCST. The concentration of PEA has no obvious effect on LCST. Therefore, PEA will be potential in applications of drug delivery, separation, and biotechnology. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1292–1297, 2009     

Interactions in solution between a hydrophobic polymer and various kinds of surfactants

Interactions in solution between a hydrophobic polymer and surfactants were studied by viscometry, light scattering and conductimetry measurements. One polymer, poly(2-ethyl hexyl methacrylate) (P2EHMA), five surfactants, sodium dodecyl sulfate (SDS), hexadecyl trimethylammonium bromide (HTAB), hexadecyl pyridinium chloride (HPCl), and ethoxylated nonyl phenol containing 10 or 25 segments of ethylene oxide (NP10 or NP25), and one solvent mixture, THF/6 vol% H₂O were used in this work. For the P2EHMA/surfactant mixtures in THF/6 vol% H₂O, the viscosity versus surfactant concentration curves are similar in shape for all surfactants. They show a minimum at low surfactant concentration followed at higher concentration by a maximum and a plateau. An interpretation of these curve shapes is proposed. The relevance of these findings to the problem of the polymer/surfactant interactions in latexes and latex films is also discussed.     

Electrical conductivity of aqueous polymer solutions

 Theoretical equations were proposed to adequately simulate the electrical conductivity behavior of aqueous solutions of both charged and uncharged polymers. The theory, based on the mixture equation of Boned and Peyrelasse, was experimentally verified on poly(acrylic acid) (PAA) in water and poly(ethylene oxide) (PEO) in aqueous electrolyte solutions. The data analysis suggested that both the polymer coils may be depicted as oblate ellipsoids. Subsequently, the semiaxes values of the polymer coils were determined, and they were in good agreement with the results reported in the literature. Received: 25 June 1996 Accepted: 2 October 1996     

Effects of salt on the temperature and pressure responsive properties of poly(N-vinylisobutyramide) aqueous solutions

 We examined the effects of salt on the lower critical solution temperature (LCST) and lower critical solution pressure (LCSP) of aqueous solutions of poly (N-vinylisobutyramide), polyNVIBA, and compared them with those on poly(N-isopropylacrylamide), polyNIPAAm. We found that the addition of salt (such as Na₂SO₄, NaCl, or KCl) decreased the LCST of aqueous polyNVIBA from 45 °C to below 20 °C, almost linearly with the salt concentrations and dependent on the type of salt. We observed a similar concentration-dependent decrease in LCST for polyNIPAAm. When KI or NaSCN was added to each aqueous polymer solution, some smaller increases in LCST were observed at relatively low salt concentrations; higher concentrations of salt gave an almost linear decrease in LCST. As for LCSP, the addition of most types of salt lowered the transition pressure, but the effects were much more dependent on the type and the valence of the salt (especially of anion) in both polymers. Salt with divalent anion showed a larger decrease in LCSP, but those with mono valent anion showed a relatively small decrease, even showed a slight increase at lower salt concentrations in the case of polyNVIBA. Salt with I^- or SCN^- showed evident increases in LCSP up to 1 M and was maintained higher than the control even at 2 M. We discuss the interactions of the amide group in the side chains of polymers and water and their perturbation by ions. Received: 13 November 1997 Accepted: 22 January 1998     

Isotope and pressure effects in polymer solutions. Demixing of polystyrene(h/d) poly-2-chlorostyrene blends

Liquid-liquid demixing, following spinodal quenches of poly-2-chlorostyrene/polystyrene blends, was followed by light scattering at 632.8 nm. The dependences of demixing on H/D substitution and molecular weight of the polystyrene, and on pressure, are reported. In the region of interest, the phase diagram is of the lower critical solution (LCS) type, and demixing is induced by raising the temperature. The transition temperature is lowered by deuterium substitution. At constant quench depth the transition proceeds more rapidly at elevated pressure. © 1995 John Wiley & Sons, Inc.     

Cloud points and phase separation of aqueous poly(N-vinylacetamide) solutions in the presence of salts

Aqueous poly(N-vinylacetamide) (PNVA) solution was found to exhibit the cloud point in the presence of salt. This cloud point was shown to correspond to a liquid-liquid phase separation, as confirmed when the PNVA-salt solutions were maintained at a temperature above the cloud point. The upper layer had a higher polymer concentration and a lower salt concentration than those in the lower layer. Thus interaction between PNVA and salts are repulsive. The lower critical solution temperatures were estimated to be 18±1°C for 1.25 molal (NH₄)₂SO₄ and 25±1°C for 0.76 molal Na₂SO₄. Divalent anions such as SO _2– ⁴ , SO _2– ³ , HPO _2– ⁴ and CO _2– ³ were effective in causing turbidity when examined at 25°C. Dependence of the effect on the cationic species was similar to but significantly different from that for acetyltetraglycine ethylester. The cloud points of PNVA decreased linearly with the increase of the polymer concentration at a fixed salt concentration or with the increase of the salt concentration at a fixed polymer concentration. A parameter analogous to the salting-out constant was empirically derived from the dependencies of the cloud points on the concentrations of polymer and salt.     

1H NMR study of phase transition of uncharged and negatively charged poly(N-isopropylmethacrylamide) in D2O solutions

¹H NMR spectroscopy has been applied to the analysis of dynamic-structural changes during temperature-induced phase transition of non-ionized poly(N-isopropylmethacrylamide) (PIPMAm) and ionized copolymers of N-isopropylmethacrylamide with sodium methacrylate, all in D₂O solutions with various polymer concentrations (c = 0.1-10 wt.-%) and ionic comonomer mole fractions (i = 0-10 mole %). It was found that the formation of compact globular-like structures during the phase transition is independent of polymer concentration for non-ionized samples; the presence of negative charges on the polymer chains leads to a dependence of the phase transition temperature on c and i. Virtually all PIPMAm segments are in globular-like structures for low polymer concentrations; for c ⩾ 1 wt.-%, this holds only for low content i of the ionic comonomer. An increase in c and i leads to a decrease in the fraction of polymer segments in globular-like structures; for samples with highest values of c and i, the phase transition was not observed.