l-Ribose Production from l-Arabinose by Immobilized Recombinant Escherichia coli Co-expressing the l-Arabinose Isomerase and Mannose-6-Phosphate Isomerase Genes from Geobacillus thermodenitrificans

l-Ribose is an important precursor for antiviral agents, and thus its high-level production is urgently demanded. For this aim, immobilized recombinant Escherichia coli cells expressing the l-arabinose isomerase and variant mannose-6-phosphate isomerase genes from Geobacillus thermodenitrificans were developed. The immobilized cells produced 99 g/l l-ribose from 300 g/l l-arabinose in 3 h at pH 7.5 and 60 °C in the presence of 1 mM Co²⁺, with a conversion yield of 33 % (w/w) and a productivity of 33 g/l/h. The immobilized cells in the packed-bed bioreactor at a dilution rate of 0.2 h^?1 produced an average of 100 g/l l-ribose with a conversion yield of 33 % and a productivity of 5.0 g/l/h for the first 12 days, and the operational half-life in the bioreactor was 28 days. Our study is first verification for l-ribose production by long-term operation and feasible for cost-effective commercialization. The immobilized cells in the present study also showed the highest conversion yield among processes from l-arabinose as the substrate.     

Exploiting thermodynamic data to optimize the enantioseparation of underivatized amino acids in ligand exchange capillary electrophoresis

Stereoselective amino acid analysis has increasingly moved into the scope of interest of the scientific community. In this work, we report a study on the chiral separation of underivatized d,l-His by ligand exchange capillary electrophoresis (LECE), utilizing accurate ex ante calculations. This has been obtained by the addition to the background electrolytes (BGE) of NaClO₄ which renders the separations “all in solution processes”, allowing to accurately calculate in advance the concentrations of the species present in solution and to optimize the system performances. To this aim, the formation of ternary complexes of Cu²⁺ ion and l-lysine (l-Lys) or l-ornithine (l-Orn) with l- and d-histidine (His), and histamine (Hm) have been studied by potentiometry and calorimetry at 25 °C and with 0.1 mol dm^?3 (KNO₃) in aqueous solution. The ternary species [Cu(L)(l-His)H]⁺ and [Cu(L)(d-His)H]⁺ (where L?=?l-Lys or l-Orn) show a slight but still detectable stereoselectivity, and the determination of ΔH° and ΔS° values allowed the understanding of the factors which determine this phenomenon. The stereoselectivity showed by the protonated ternary species has been exploited to chirally separate d,l-His in LECE, by using the binary complexes of copper(II) with l-Lys or l-Orn as background electrolytes added with the appropriate amounts of NaClO₄.

A Validated Chiral LC Method for the Enantiomeric Separation of Nateglinide and the Quantitative Determination of Its l-Enantiomer

A simple and accurate chiral liquid chromatographic method was developed for the enantiomeric purity determination of d-nateglinide and quantitative determination of l-nateglinide in bulk drug samples. Good resolution (R _s  > 6.0) between d-enantiomer and l-enantiomer of nateglinide were achieved with Chiralpak AD-H (250 × 4.6 mm, 5 μm particle size) column using hexane and ethanol (90:10 v/v) as mobile phase at 25 °C temperature. Flow rate was kept as 1.0 mL min^?1 and elution was monitored at 210 nm. The effects of the mobile phase composition, the flow rate and the temperature on the chromatographic separation were investigated. Developed method is capable to detect (LOD) and quantitate (LOQ) l-nateglinide to the levels of 0.3 and 1.0 μg mL^?1 respectively, for 10 μL injection volume. The percentage RSD of the peak area of six replicate injections of l-nateglinide at LOQ concentration was 5.2. The percentage recoveries of l-nateglinide from d-nateglinide ranged from 97.9 to 99.7. The test solution and mobile phase was found to be stable up to 24 h after preparation. The developed method was validated with respect to LOD, LOQ, precision, linearity, accuracy, robustness and ruggedness.     

Simultaneous determination of cadmium and lead in wine by electrothermal atomic absorption spectrometry

A method has been developed for the direct simultaneous determination of Cd and Pb in white and red wine by electrothermal atomic absorption spectrometry (ET-AAS) using a transversely heated graphite tube atomizer (THGA) with longitudinal Zeeman-effect background correction. The thermal behavior of both analytes during pyrolysis and atomization stages were investigated in 0.028 mol l⁻¹ HNO₃ and in 1+1 v/v diluted wine using mixtures of Pd(NO₃)₂+Mg(NO₃)₂ and NH₄H₂PO₄+Mg(NO₃)₂ as chemical modifiers. With 5 μg Pd+3 μg Mg as the modifiers and a two-step pyrolysis (10 s at 400°C and 10 s at 600°C), the formation of carbonaceous residues inside the atomizer was avoided. For 20 μl of sample (wine+0.056 mol l⁻¹ HNO₃, 1+1, v/v) dispensed into the graphite tube, analytical curves in the 0.10–1.0 μg l⁻¹ Cd and 5.0–50 μg l⁻¹ Pb ranges were established. The characteristic mass was approximately 0.6 pg for Cd and 33 pg for Pb, and the lifetime of the tube was approximately 400 firings. The limits of detection (LOD) based on integrated absorbance (0.03 μg l⁻¹ for Cd, 0.8 μg l⁻¹ for Pb) exceeded the requirements of Brazilian Food Regulations (decree #55871 from Health Department), which establish the maximum permissible level for Cd at 200 μg l⁻¹ and for Pb at 500 μg l⁻¹. The relative standard deviations (n=12) were typically <8% for Cd and <6% for Pb. The recoveries of Cd and Pb added to wine samples varied from 88 to 107% and 93 to 103%, respectively. The accuracy of the direct determination of Cd and Pb was checked for 10 table wines by comparing the results with those obtained for digested wine using single-element ET-AAS, which were in agreement at the 95% confidence level.     

Purification and Characterization of RNA Allied Extracellular Tyrosinase from Aspergillus Species

Production of l-DOPA, an anti-Parkinson’s drug, using biological sources is widely studied in which tyrosinase is known to play a vital role. Tyrosinase is an omnipresent type 3 copper enzyme participating in many essential biological functions. Understanding properties of tyrosinase is essential for developing useful tyrosinase-based applications. Hence, extracellular tyrosinase from Aspergillus flavus UWFP 570 was purified using ammonium sulphate precipitation and DEAE ion exchange chromatography up to 8.3-fold. Purified protein was a riboprotein in nature containing significant amount of RNA which was confirmed colorimetrically and by electrophoresis. Removal of RNA reduced the activity and altered the conformation of tyrosinase as suggested by spectroflurometric results. Optimum pH and temperature of this 140 kDa protein were 7 and 40 °C, respectively. Copper sulphate and magnesium chloride enhanced the activity whereas in contrast FeCl₃ inhibited the activity completely. Purified tyrosinase transformed l-tyrosine (5 mM) to l-DOPA within 5 h.     

Protonation Equilibria of Some Selected α-Amino Acids in DMSO–Water Mixture and Their Cu(II)-Complexes

The protonation constants of some α-amino acids (glycine (Gly), l-alanine (Ala), l-valine (Val), l-serine (Ser), l-leucine (Leu) and l-isoleucine (Ile)) were studied in water and DMSO–water solution mixtures containing 30, 50 and 70 vol-% DMSO; in addition the complex formation equilibria of their copper(II) complexes were studied by potentiometric technique using a combined pH electrode system calibrated in concentration units of the hydrogen ion at 25 ± 0.1 °C under a nitrogen atmosphere, and at an ionic strength of 0.10 mol·dm^?3 NaNO₃. The protonation constants and the overall stability constants of copper(II) complexes were influenced by changes in solvent composition, and their variations are discussed in terms of solvent and structural properties.     

Development of methodologies to determine aluminum, cadmium, chromium and lead in drinking water by ET AAS using permanent modifiers

In this work, methodologies were developed to determine aluminum (Al), cadmium chromium and lead in drinking water by electrothermal atomic absorption spectrometry using permanent modifiers. No use of modifier, iridium, ruthenium, rhodium and zirconium (independently, 500 μg) were tested to each one analyte through the pyrolysis and atomization temperatures curves. As the matrix is very simple, did not had occurred problems with the background for all metals. The best results obtained for cadmium and chromium was with the use of rhodium permanent modifier. For lead and aluminum, the best choice was the use of zirconium. The selection for the modifier took into account the sensitivity, form of the absorption pulse and low atomization temperature (what contributes to elevate the useful life of the graphite tube). For aluminum using zirconium permanent, the best pyrolysis and atomization temperatures were respectively, of 1000 and 2500 °C with a characteristic mass (1% of absorbance, m_o) of 19 pg (recommended of 20 pg). For cadmium, with use of rhodium the best temperatures for the pyrolysis and atomization were respectively of 400 and 1100 °C, with a symmetrical peak and with a m_o of 1.0 pg (recommended of 1.0 pg). For chromium with rhodium permanent, the best temperatures for pyrolysis and atomization were respectively of 1000 and 2200 °C, with symmetrical peak and m_o of 5.3 pg (recommended of 5.5 pg). For lead with zirconium permanent, the best temperatures for pyrolysis and atomization were of 700 and 2400 °C, with symmetrical peak and with m_o of 30 pg (recommended of 20 pg). Water samples spiked with each one of the metals in four different levels inside of the acceptable values presented recoveries always close to 100%. The detection limits were of 0.1 μg l⁻¹ for cadmium; 0.2 μg l⁻¹ for chromium; 0.5 μg l⁻¹ for lead and 1.4 μg l⁻¹ for aluminum.     

The use of gold nanoparticles as an effective modifier for the determination of arsenic and antimony by electrothermal atomic absorption spectrometry

Gold nanoparticles (AuNPs) were used as a new chemical modifier for the determination of arsenic and antimony in salt solutions by electrothermal atomic absorption spectrometry. The AuNPs were prepared by reducing chloroauric acid with sodium citrate. The effects of pyrolysis and atomization temperatures, the amounts of interferents and modifier on the sensitivities of arsenic and antimony were investigated. As and Sb remain in the graphite tube up to 1,100°C, which is sufficient for the determination of the two metals in certified reference materials and spiked sea water samples within a 95% confidence level with low RSD (<10%). The detection limits (N?=?10 at 3??) for As and Sb in sea water are 2.3???g?L^-1 and 3.0???g?L^-1, respectively. Almost no background as well as a blank value was detected for AuNPs.

A Simple and Fast Method for Manganese Determination in Antihypertensive Drugs by Slurry Sampling Graphite Furnace Atomic Absorption Spectrometry

Abstract

A simple and rapid procedure for the determination of manganese in anti‐hypertensive drugs is proposed. The samples were treated with dilute nitric acid (1.2% v/v) with stirring using a vortex stirrer to yield a slurry. To determine the best conditions for analysis by graphite furnace atomic absorption spectrometry (GF AAS), a planning factorial was initially employed that demonstrated that the non‐use of chemical modifiers and the use of lower pyrolysis temperatures were more appropriate. Next, the pyrolysis and atomization temperature curves were obtained. The best pyrolysis and atomization temperatures encountered were 500 and 2200°C, respectively. Calibration was performed by matrix matching. The characteristic mass was 0.70±0.14 pg (the recommended mass was 0.60 pg); the limits of detection and quantification were 0.23 and 0.77 µg l^?1, respectively. The precision obtained in the intra‐ and inter‐assay studies of the drug spiked with 0.5, 1.0 and 1.5 µg l^?1 of Mn did not exceed 11% (n=7). Recovery studies of the drug spiked with three levels (n=7) of Mn yielded results between 101.0±4.5 and 116.3±9.7%. The results of an analysis of a certified urine sample (two levels of Mn) agreed at a 95% level of confidence. Forty‐eight antihypertensive drug samples were analyzed, and the results varied from 2.9 ng to 1.9 µg of Mn per capsule^?1.     

Efficient Microbial Conversion of l-Tyrosine to l-DOPA by Brevundimonas sp. SGJ

l-DOPA (3,4-dihydroxyphenyl-l-alanine), the most widely used drug for the treatment of Parkinson??s disease, was produced in buffer using biomass of Brevundimonas sp. SGJ. The effects of enhancers, such as carrageenan, diatomaceous earth, and activated charcoal, on the l-DOPA production were evaluated to obtain the maximum yield. The optimal process conditions found were pH?8, 2?g?l^?1 cell mass, 2?g?l^?1 l-tyrosine, 0.04?g?l^?1 CuSO₄, 0.02?g?l^?1 l-ascorbic acid, 0.5?g?l^?1 carrageenan, and 40?°C temperature. In addition, repeated use of cells resulted in the highest yield of 3.81?g?l^?1 (95.2%) of l-DOPA with utilization of 4?g?l^?1 l-tyrosine, and the highest tyrosinase activity (9,201?U?mg^?1) was observed at 18?h of incubation. Furthermore, the produced l-DOPA was confirmed by high-performance thin-layer chromatography, high-performance liquid chromatography, and gas chromatography?Cmass spectroscopy. Kinetic studies showed significant values of Y _p/s, Q _s, and q _s after optimization of the process. Thus, Brevundimonas sp. SGJ could be an eventual new source for large-scale production of l-DOPA.     

Characteristics of α-l-Arabinofuranosidase from Streptomyces sp I10-1 for Production of l-Arabinose from Corn Hull Arabinoxylan

Streptomyces sp I10-1 α-l-arabinofuranosidase efficiently produced l-arabinose from high arabinose-content corn hull arabinoxylan (ratio of arabinose to xylose, 0.6). The optimum pH at 40 °C was around 6, and the enzyme was stable from pH 5 to 11. The optimum temperature was 50 °C at pH 5, and the activity was stable at 40 °C. The enzymatic activity against corn hull arabinoxylan was 2.3 times higher than towards p-nitrophenyl-α-l-arabinofuranoside. Approximately 45 % l-arabinose recovery was achieved from corn hull arabinoxylan. It was considered that l-arabinose residues not removed by the enzyme were attributable to those linked with ferulic acid. The open reading frame of the enzyme gene consisted of 1,224 bp, and the predicted peptide was 408 amino acids, which corresponded to a molecular size of 45, 248 Da. It was presumed that the smaller molecular size (31,000 Da) estimated on SDS-PAGE resulted from proteolysis by proteases. I10-1 α-l-arabinofuranosidase belongs to the Alpha-l-AF C superfamily, which is associated with glycoside hydrolase family 51, but the properties were unique.     

Intercalation of Mg–Al layered double hydroxides by l-proline: synthesis and characterization

The intercalations of l-proline into Mg–Al layered double hydroxides (LDH-CO₃) have been prepared by three different methods: calcine-recovering, coprecipitation and anion exchange. The products thus obtained have been characterized by several experimental techniques: XRD, FT-IR and DSC-TG. The results show that the original interlayer carbonate ions can be replaced by the organic anions under the controlled conditions. The interlayer spaces of the materials are expanded to 0.86, 1.12 and 1.07 nm. l-proline entered into the layers as vertical and horizontal, the molecules of l-proline may stay in the layers in a bilayer with the carboxylate groups pointing towards the LDHs layers, and the structure models are shown. The crystal has a good regularity of the layered structure, which increases thermal stability of l-proline, and thermal analysis confirms that the intercalation can make l-proline stable up to 429 °C, which is 200 °C higher than that for pure l-proline.     

Template-Free Hydrothermal Synthesis of Hollow α-FeOOH Urchin-Like Spheres and Their Conversion to α-Fe2O3 Under Low-Temperature Thermal Treatment in Air

Hollow α-FeOOH urchin-like spheres were synthesized by a simple hydrothermal method at 160 °C for 12 h and their thermal conversion to hollow α-Fe₂O₃ urchin-like spheres was performed at 300 °C for 2 h in air. The results from X-ray diffraction and electron microscopy analyses reveal that hollow α-FeOOH urchin-like spheres were completely transformed to hollow α-Fe₂O₃ urchin-like spheres without a significant morphological change. Also, the effect of hydrothermal treatment temperature (170–200 °C for 12 h) on the phase structure and morphology of the final product was investigated. Pure α-FeOOH, the mixture of α-FeOOH and α-Fe₂O₃, and pure α-Fe₂O₃ with different morphologies were obtained at <180, 180–190 and 200 °C, respectively. The obtained materials can be used in the photodegradation of organic pollutants under visible light irradiation.     

RP-LC Resolution of (R,S)-Atenolol via Diastereomerization with Marfey’s Reagent and Its Structural Variants Under Conventional and Microwave Heating

(R,S)-Atenolol was derivatized with Marfey’s reagent, (MR; 1-fluoro-2,4-dinitrophenyl-5-l-alanine amide or FDNP-l-Ala-NH₂) and its four structural variants (FDNP-l-Phe-NH₂, FDNP-l-Val-NH₂, FDNP-l-Leu-NH₂ and FDNP-l-Pro-NH₂). MR reacts quantitatively with 1° and 2° amino groups and atenolol has a secondary amino group. The derivatization reactions were carried out under conventional and microwave heating and compared. The resulting diastereomers were separated on RP-TLC and on a C18 column with detection at 340 nm. (R)-Isomer eluted before (S). The conditions of derivatization and chromatographic separation were optimized. The method was validated for linearity, repeatability, limits of detection and limit of quantification.     

Enhanced l-Lactic Acid Production from Biomass-Derived Xylose by a Mutant Bacillus coagulans

Xylose effective utilization is crucial for production of bulk chemicals from low-cost lignocellulosic substrates. In this study, an efficient l-lactate production process from xylose by a mutant Bacillus coagulans NL-CC-17 was demonstrated. The nutritional requirements for l-lactate production by B. coagulans NL-CC-17 were optimized statistically in shake flask fermentations. Corn steep liquor powder and yeast exact were identified as the most significant factors by the two-level Plackett–Burman design. Steepest ascent experiments were applied to approach the optimal region of the two factors, and a central composite design was employed to determine their optimal levels. The optimal medium was used to perform batch fermentation in a 3-l bioreactor. A maximum of 90.29 g l^?1? l-lactic acid was obtained from 100 g l^?1 xylose in 120 h. When using corn stove prehydrolysates as substrates, 23.49 g l^?1? l-lactic acid was obtained in 36 h and the yield was 83.09 %.     

Investigation of the biosynthesis of acetyl-CoA and oxaloacetic acid from pyruvic acid and the quantitative evaluation of incorporated 13C-labeled l-alanine in Arthrobacter hyalinus

Studies on the contribution to acetyl-CoA and oxaloacetic acid from the pyruvic acid transformation from l-alanine in Arthrobacter hyalinus were conducted by means of feeding experiments with l-[1-¹³C]alanine and l-[3-¹³C]alanine, followed by an analysis of the labeling patterns of coproporphyrinogen III using ¹³C NMR spectroscopy. The results demonstrated that l-alanine was transformed via pyruvic acid to both acetyl-CoA and oxaloacetic acid. Additionally, the quantitative analysis indicated that pyruvic acid was transformed to acetyl-CoA and oxaloacetic acid in the ratio of 1:0.8.     

Syntheses and characterization of a new class of vanadia precursors of oxime-modified oxovanadium(V) isopropoxide,crystal and molecular structure of [VO{ONC10H16}3]

Modification of [VO(OPrⁱ)₃] with oximes in different molar ratios, yielded new class of vanadia precursors, [VO{OPrⁱ}_3?n{L}_n] {where, n = 1–3 and LH = C₉H₁₆C=NOH (1–3) and (CH₃)₂C=NOH (4–6)}.All the products are yellow in colour. (1) and (2) are liquid/viscous liquid, while others are solids. Molecular weight measurements of all these derivatives and the ESI-mass spectral studies of (1), (2), (3) and (5) indicate their monomeric nature. ¹H and ¹³C{¹H} NMR spectra suggest that the oximato moieties are monodentate in solution which was further confirmed by the ⁵¹V NMR signals, appeared in the region expected for tetra-coordinated oxo-vanadium atoms. On ageing, a disproportionation reaction occurs in (1) and some crystals appeared. Single crystal X-ray diffraction analyses of the crystals obtained from (1) as well as from (3) were found to be the same and indicate the presence of side-on {dihapto η ²-(N, O)} binding modes of the oximato ligands, leading to the formation of seven coordination environment around the vanadium atom. Thermogravimetric curve of (1) exhibits multi-step decomposition with the formation of V₂O₅ as the final product at ~850 °C. Sol–gel transformation of (3) yielded (a) VO₂ sintered at 300 °C and (b) V₂O₅ at 600 °C. Similarly, sol–gel transformations of (1) and (2) yielded V₂O₅ (c) and (d) at 600 °C, respectively. Formation of monoclinic phase in (a) and orthorhombic phase in (b), (c) and (d) were confirmed by powder XRD patterns.     

Enantioselective Separation and Determination of Carnosine in Rat Plasma by Fluorescence LC for Stereoselective Pharmacokinetic Studies

A sensitive fluorescence liquid chromatographic analytical method was developed for the simultaneous determination of carnosine enantiomers in rat plasma. The method was applied to pharmacokinetic studies. Chiral separation of carnosine enantiomers was achieved by pre-column derivatization with o-phthaldialdehyde and the thiol N-acety-l-cysteine as derivating reagents. They were separated on an ODS column and detected by fluorescence detection (λ_ex = 350 nm, λ_em = 450 nm). γ-Aminobutyric acid was used as internal standard. The method was linear up to 6,000 ng mL^?1 for l-carnosine, 4,000 ng mL^?1 for d-carnosine. Low limit of quantitation (LLOQ) was 40 ng mL^?1 for each isomer. The relative standard deviations obtained for intra- and inter-day precision were lower than 12% and the recoveries were higher than 75% for both enantiomers. The method was applied to a stereoselective study on the pharmacokinetics of carnosine after oral administration with a single dose (carnosine, 75 mg kg^?1 for each isomer) to a rat. The initial data indicated that l-carnosine had a larger value of the highest plasma concentration than d-carnosine (C _max 5,344 vs. 1,914 ng mL^?1), and that of l-carnosine had a lower value of AUC_(0?∞) and t _1/2(h) (AUC_(0?∞) 5,306 vs. 6,321 ng h mL^?1, t _1/2 1.43 vs. 3.37 h). Our results indicated that the pharmacokinetic of l-carnosine and d-carnosine revealed enantioselective properties significantly.     

Determination of Tryptophan in Lysozyme and Lysozyme Hydrolysate by Chiral LC Using d-Tryptophan as Internal Standard

In the present study, a new LC method is described for the quantitation of tryptophan (Trp) in lysozyme and enzymatic lysozyme hydrolysate. To compensate for partial breakdown of Trp during hydrolysis with 4 M methanesulfonic acid, an enantiomer dilution method was developed. The method makes use of free d-Trp or a d-Trp-containing dipeptide as internal standard for the quantitation of l-tryptophan in these matrices. After acid hydrolysis in 4 M methanesulfonic acid, LC analysis is performed on a Crownpak CR chiral column in combination with fluorescence detection. Optimum time and temperature for the acid hydrolysis were investigated in order to obtain complete hydrolysis of the source materials. A comparison of the l-Trp recoveries was made for d-Trp and Gly-d-Trp as internal standards. By choosing a hydrolysis time of 150 min at 150 °C, 93% recovery of l-Trp from lysozyme was achieved. Under these conditions, no racemization occurred. When choosing d-Trp as internal standard, a direct LC method for l-Trp in lysozyme and enzymatic lysozyme hydrolysate was established without the need for pre-column derivatization and without the need to use Trp protecting agents during acid hydrolysis.     

In vitro monitoring of picogram levels of risperidone in human urine via luminollysozyme flow injection chemiluminescence

The anti-schizophrenic drug risperidone (RSP) exerts an inhibitory effect on the chemiluminescence (CL) of the luminol-lysozyme system. This finding forms the basis for a sensitive flow injection method for its determination at picogram levels. RSP binds to Trp62 in the lysozyme, and this leads to a conformational change upon which the CL of the system is quenched. The decrease in CL is proportional to the logarithm of the concentration of RSP, and the calibration graph is linear in the range from 0.1 pg?mL^?1 to 1.0 ng?mL^?1, with relative standard deviations of <5.0%, and a detection limit of 0.05 pg?mL^?1 (3σ). At a flow rate of 2.0 mL?min^?1, the whole process including sampling and washing is completed within 20 s. The method was successfully applied to monitoring RSP in human urine after incorporation of 2 mg of RSP, with a total excretion of 16.6% within 8.5 h.