Structures in a microemulsion system of an ethoxylated polymethylsiloxane surfactant, water, and oil studied by NMR self-diffusion measurements

Microemulsion samples of an ethoxylated polymethylsiloxane surfactant, water, and 1-dodecanol or 1-decanol as the oil component are investigated using pulsed field gradient NMR to determine the components' self-diffusion coefficients. It is demonstrated that the structure of the liquids depends heavily on their composition, in that, for low water content, the structure is water-in-oil (w/o), gradually changing to a bicontinous structure in a concentration range ca. 40-60 wt % water, and, finally, to an oil-in-water (o/w) structure for more water rich samples. In the water poor samples, the surfactant molecules apparently do not form extended aggregates (inverted micelles). In the water rich samples, the surfactant and oil (if present) form ordinary micelles, and it is demonstrated for the binary water/surfactant system that the micelles are spherical at very low surfactant concentrations and grow into oblate (disk) shaped aggregates at surfactant concentrations above ca. 5 wt %. From density and viscosity measurements of binary mixtures of oil (1-decanol) and surfactant, it is demonstrated that these components form solutions that are not far from ideal.     

Double inversion of emulsions induced by salt concentration

The effects of salt on emulsions containing sorbitan oleate (Span 80) and Laponite particles were investigated. Surprisingly, a novel double phase inversion was induced by simply changing the salt concentration. At fixed concentration of Laponite particles in the aqueous phase and surfactant in paraffin oil, emulsions are oil in water (o/w) when the concentration of NaCl is lower than 5 mM. Emulsions of water in oil (w/o) are obtained when the NaCl concentration is between 5 and 20 mM. Then the emulsions invert to o/w when the salt concentration is higher than 50 mM. In this process, different emulsifiers dominate the composition of the interfacial layer, and the emulsion type is correspondingly controlled. When the salt concentration is low in the aqueous dispersion of Laponite, the particles are discrete and can move to the interface freely. Therefore, the emulsions are stabilized by particles and surfactant, and the type is o/w as particles are in domination. At intermediate salt concentrations, the aqueous dispersions of Laponite are gel-like, the viscosity is high, and the transition of the particles from the aqueous phase to the interface is inhibited. The emulsions are stabilized mainly by lipophilic surfactant, and w/o emulsions are obtained. For high salt concentration, flocculation occurs and the viscosity of the dispersion is reduced; thus, the adsorption of particles is promoted and the type of emulsions inverts to o/w. Laser-induced fluorescent confocal micrographs and cryo transmission electron microscopy clearly confirm the adsorption of Laponite particles on the surface of o/w emulsion droplets, whereas the accumulation of particles at the w/o emulsion droplet surfaces was not observed. This mechanism is also supported by the results of rheology and interfacial tension measurements.     

Investigation of interfacial and structural properties of CTAB at the oil/water interface using dissipative particle dynamics simulations

We have used dissipative particle dynamics (DPD) to simulate the system of cetyltrimethylammonium bromide (CTAB) monolayer at the oil/water interface. The interfacial properties (interfacial density, interfacial thickness, and interfacial tension), structural properties (area compressibility modulus, end to end distance, and order parameter), and their dependence on the oil/water ratio and the surfactant concentration were investigated. Three different microstructures, spherical oil in water (o/w), interfacial phase, and water in oil (w/o), can be clearly observed with the oil/water ratio increasing. Both the snapshots and the density profiles of the simulation show that a well defined interface exists between the oil and water phases. The interface thickens with CTAB concentration and oil/water ratio. The area compressibility modulus decreases with an increase in the oil/water ratio. The CTAB molecules are more highly packed at the interface and more upright with both concentration and oil/water ratio. The root mean square end-to-end distance and order parameter have a very weak dependence on the oil/water ratio. But both of them show an increase with CTAB concentration, indicating that the surfactant molecules at the interface become more stretched and more ordered at high concentration. As CTAB concentration increases further, the order parameter decreases instead because the bending of the interface. At the same time, it is shown that CTAB has a high interfacial efficiency at the oil/water interface.     

壬基酚聚氧乙烯醚在油相中的CMCo及相关问题研究

对壬基酚聚氧乙烯醚在油相中的临界胶束浓度(CMC_o)及与之相关的问题进行了研究,并获得了部分CMC_o值.对CMC_o与表面活性剂自身结构的关系进行分析和数学处理后,发现CMC_o与活性物质自身结构间仍为对数关系.同时在对某些具体体系的界面张力随表面活性剂不同而发生的变化进行了详细分析,发现CMC_w和CMC_o是评价表面活性剂性能的有效工具.     

Factors affecting the loading efficiency of water-soluble drugs in PLGA microspheres

Poly(lactide-co-glycolide), PLGA, microspheres containing blue dextran as a hydrophilic model drug were prepared by a solvent evaporation method from w/o/w emulsions using a micro homogenizer. Effects of surfactant concentration in oil phase, stirring time period and stirring rate in the preparation procedure of primary emulsion (w/o) upon drug-loading efficiency were evaluated. Stirring rate during preparation of primary emulsion and surfactant concentration in oil phase affected drug-loading efficiency and the particle size of primary emulsion. Microspheres having the higher drug-loading efficiency were obtained when size differences between the primary emulsions and the secondary ones were large. That is, when the diameter of the primary emulsion is much smaller than that of the secondary emulsion, PLGA microspheres with high-loading efficiency of blue dextran were obtained.     

High internal phase emulsions: catastrophic phase inversion, stability, and triggered destabilization

We have investigated the formation, drop sizes, and stability of emulsions prepared by hand shaking in a closed vessel in which the emulsion is in contact with a single type of surface during its formation. The emulsions undergo catastrophic phase inversion from oil-in-water (o/w) to water-in-oil (w/o) as the oil volume fraction is increased. We find that the oil volume fraction required for catastrophic inversion exhibits a linear correlation with the oil-water-solid surface contact angle. W/o high internal phase emulsions (HIPEs) prepared in this way contain water drops of diameters in the range 10-100 μm; emulsion drop size depends on the surfactant concentration and method of preparation. W/o HIPEs with large water drops show water separation but w/o HIPEs with small water drops are stable with respect to water separation for more than 100 days. The destabilization of the w/o HIPEs can be triggered by either evaporation of the oil continuous phase or by contact the emulsion with a solid surface of the "wrong" wettability.     

Effect of alpha-lactalbumin on aerosol-OT phase structures in oil/water mixtures

The ability of water-soluble, globular proteins to tune surfactant/oil/water self-assemblies has potential for the formation of biocompatible microemulsions and also plays a role in protein function at biological interfaces. In this work, we examined the effect of the protein alpha-lactalbumin on Aerosol-OT (AOT) phase structures in equivolume mixtures of oil and 0.1 M brine. In this pseudo-ternary system, surfactants are free to move to either oil or water phase to adopt phase structures close to the spontaneous curvature of the surfactants. Using small-angle X-ray scattering, we observed that addition of this protein changed the spontaneous curvature of the surfactant monolayer substantially. In the absence of protein, AOT adopted a negative spontaneous curvature to form spherical w/o microemulsion droplets. When less than 1 wt % of alpha-lactalbumin was added into the system, the w/o droplets became nonspherical and larger in volume, corresponding to an increase in water uptake into the droplets. As the protein-to-surfactant ratio increased, protein, surfactant, and oil increasingly partitioned toward the aqueous phase. There the protein triggered the formation of o/w microemulsions with a positive spontaneous curvature. These protein-containing structures exhibited significant interparticle attraction. We also compared the influence of two oil types, isooctane and cyclohexane, on the protein/surfactant interactions. We propose that the more negative natural curvature of the AOT/cyclohexane monolayer in the absence of protein prevented protein incorporation within organic phase structures and consequently pushed the system self-assembly toward aqueous aggregate formation.     

A novel formulation of the pickering emulsion stabilized with silica nanoparticles and its thermal resistance at high temperatures

Stabilization of emulsions with solid particles can be used in several fields of oil and gas industry because of their higher stability. Solid particles should be amphiphilic to be able to make Pickering emulsions. This goal is achieved by using surfactants at low concentrations. Oil-in-water (o/w) emulsions are usually stabilized by surfactant but show poor thermal stability. This problem limits their applications at high-temperature conditions. In this study, a novel formulation for o/w stabilized emulsion by using silica nanoparticles and the nonionic surfactant is investigated for the formulation of thermally stable Pickering emulsion. The experiments performed on this Pickering emulsion formula showed higher thermal stability than conventional emulsions. The optimum wettability was found for DME surfactant and silica nanoparticles, consequently, in that region; Pickering emulsion showed the highest stability. Rheological changes were evaluated versus variation in surfactant concentration, silica concentration and pH. Scanning electron microscopy images approved the existence of a rigid layer of nanoparticle at the oil-water interface. Finally, the results show this type of emulsion remains stable in harsh conditions and allows the system to reach its optimum rheology without adding any further additives.     

石油磺酸盐水溶液及其油/水平衡体系

应用ＥＳＲ法研究了石油磺酸盐水溶液及其油／水平衡 水溶液胶束的形成及其微观性质,结果表明,石油磺酸盐／３％正丁醇／０．３％,氯化十二烷平衡体系的有效临界胶束浓度远高于石油磺酸盐在３％正丁醇,０．３％氯内中的临界胶束浓度（ＣＭＣ）,发产生正比结果的原因。     

Double phase inversion of emulsions containing layered double hydroxide particles induced by adsorption of sodium dodecyl sulfate

A liquid paraffin-water emulsion was investigated using layered double hydroxide (LDH) particles and sodium dodecyl sulfate (SDS) as emulsifiers. Both emulsifiers are well-known to stabilize oil-in-water (o/w) emulsions. Surprisingly, a double phase inversion of the emulsion containing LDH particles is induced by the adsorption of SDS. At a constant LDH concentration, the emulsion is o/w type when SDS concentrations are low. At intermediate SDS concentrations, the first emulsion inversion from o/w to w/o occurs, which is attributed to the enhanced hydrophobicity of LDH particles caused by the desorption of the second layer of surfactant, leaving a densely packed SDS monolayer on the LDH exterior surfaces. The second inversion from water-in-oil (w/o) to o/w occurs at higher SDS concentrations, which may be due to the competitive adsorption at the oil/water interfaces between the LDH particles modified by the SDS bilayers and the free SDS molecules in the bulk solution, but the free SDS molecules dominate and determine the emulsion type. Laser-induced fluorescent confocal micrographs clearly confirm the adsorption of LDH particles on the surfaces of the initial o/w and intermediate w/o emulsion droplets, whereas no LDH particles were adsorbed on the final o/w emulsion droplet surfaces. Also, transmission electron microscopy (TEM) observations indicate that the shape of the final o/w emulsions is similar to that of the monomeric SDS-stabilized emulsion but different from that of the initial o/w emulsions. The adsorption behavior of SDS on LDH particles in water was investigated to offer an explanation for the emulsion double phase inversion. The zeta potential results show that the particles will flocculate first and then redisperse following surfactant addition. Also, X-ray diffraction (XRD) measurements indicate that SDS adsorption on the LDH interior surfaces will be complete at intermediate concentrations.     

Surfactant tail length-dependent lipase activity profile in cationic water-in-oil microemulsions

The catalytic activity of Chromobacterium viscosum lipase (CV-lipase) was estimated across varying surfactant tail lengths (C-10-C-18) in water-in-oil (w/o) microemulsions of cationic surfactants containing four different hydroxyethyl-substituted head groups. An attempt to find a correlation, if any, between the activity of interfacially solubilized lipase and the varying surfactant tails was made for the first time in micellar enzymology. The second-order rate constant, k2, in lipase-catalyzed hydrolysis of p-nitrophenyl-n-hexanoate at pH 6.0 and 25 degrees C shows an improvement in enzyme activity (approximately 30-140%) across different head groups of amphiphiles with increasing tail lengths in varying solution compositions. Improvement of enzyme activity is prominent in ascending from C-10 to C-14/C-16, depending on the nature of polar head group. The hydrolytic activity of lipase in different surfactant (50 mM)/water/isooctane/n-hexanol with varying z= [alcohol]/[surfactant] (6.4 or 4.8) was amplified by 25-250% with increment in surfactant tail length in comparison with widely used cationic w/o microemulsions having solution compositions (z=16). As a notable outcome of this research, we found w/o microemulsions of 25 mM tetradecyltrimethylammonium bromide/water/isooctane/n-hexanol (z=8) producing the highest ever activity of lipase in any w/o microemulsions.     

Properties of surfactant monolayers in relation to microemulsion phase behaviour

The relationship between the properties of surfactant monolayers at oil-water interfaces and the phase behaviour in bulk of mixtures of oil + water + surfactant is discussed. Such monolayer properties include the spontaneous curvature, c_o the interfacial tension, I γ, the elasticity K (or rigidity) associated with the mean curvature, and the elasticity K associated with the Gaussian curvature. The model system chosen for investigation is the anionic surfactant AOT + aqueous NaCl + n-alkane at 20°C. In such systems, inversion of microemulsion type from oil-in-water (o/w) to water-in-oil (w/o) is possible with increasing electrolyte concentration. The tension, γ, passes through an ultralow minimum value at conditions corresponding to the formation of three phases. Using small angle neutron scattering, we have determined the structure of surfactant-rich third phases (c_o ~ 0) formed with the different alkanes. Lamellar phases consisting of surfactant monolayers separated alternately by oil and water appear with short alkanes, whereas L₃ and bicontinuous phases form in systems containing longer alkanes. The bending elasticity K has been measured for planar monolayers at the oil-water interface by ellipsometry. K is independent of salt concentration but depends markedly on alkane chain length N, falling from ~ 1 k_BT for N < 11 to ~0.1 k_BT for N = 14. This is discussed in terms of the differing extents of oil penetration into the surfactant chains. Higher rigidities favouring lamellar phases and lower rigidities favouring bicontinuous microemulsions are in line with the theoretical predictions of de Gennes and Taupin. Estimates of the constant K have been obtained in droplet microemulsions (w/o) from a knowledge of their size, K and γ. The sign of the constant is in agreement with the geometry of the phases formed in three phase systems. Finally, the ideas and concepts developed in the oil-water systems described above are used to explain the wetting behaviour by alkanes of AOT monolayers at the air-water surface.     

Dissipative Particle Dynamics Study of Interfacial Properties and the Effects of Nonionic Surfactants on Hydrocarbon/Water Microemulsions

The aim of this work was to apply dissipative particle dynamics (DPD) mesoscopic simulations to study the interfacial orientation and the effect of the nonionic surfactant, hexaethylene glycol monododecyl ether (C₁₂E₆), on different (oil (dodecane)/water) microemulsion systems. The Hildebrand-solubility-parameter model and Flory–Huggins/Hansen-solubility-parameter (FH/HSP) model were combined to evaluate the DPD interaction parameter (a_ij) where the solubility parameters (δ_i) as DPD input parameters were preliminary validated by all-atom molecular dynamics (MD) results and experimental data. The interfacial property dependence of dodecane/water/C₁₂E₆ system on the oil/water (o/w) ratio and on the concentration of surfactant and orientation at the interface were investigated. It was found that the surfactant addition reduced the IFT of o/w interfaces and this reduction was more efficient for water-in-oil microemulsions (o/w ≤ 1).     

Microstructure and structural transition in microemulsions stabilized by aldonamide-type surfactants

Significant efforts were undertaken to characterize the microstructure and structural properties of water-in-oil (w/o), oil-in-water (o/w), and bicontinuous (bc) microemulsions composed of N-alkyl-N-methylgluconamides (n-alkyl = n-C(12)H(25), n-C(14)H(29), n-C(16)H(33)) and n-alcohols (ethanol, n-propanol, n-butanol) or iso-alcohols (iso-propanol, iso-butanol) as cosurfactants, as well as iso-octane and water. The internal structure of so created four-component system was elucidated by means of an analysis of isotropic area magnitudes in phase diagrams and conductivity measurements. Dynamic light scattering (DLS) measurements provided the microemulsion size and polydispersity. Polarity and viscosity of microemulsion microenvironment were acquired by means of electron paramagnetic resonance (EPR), UV-vis absorption spectroscopy (in the case of w/o droplets), and steady-state fluorescence (SSF) (in the case of o/w droplets). The results show that both the surfactant and the cosurfactant types affect the shape and extent of microemulsions. The size of droplets depends strongly on the type of examined microemulsion and the type of cosurfactant (linear or brunched) but is almost independent of the length of the surfactant alkyl chain. The size of microemulsion droplets ranges from 8.1 to 22.6 nm and from 3.7 to 14.3 nm respectively, for o/w and o/w microemulsions, making them good candidates for both template-based reactions and household components solubilizing media.     

Water-AOT-alkylbenzene microemulsions: influence of alkyl chain length on structure and percolation behavior

We study the percolation behavior of the water-in-oil (w/o) droplet phase of AOT (sodium bis[2-ethylhexyl] sulfosuccinate)-based microemulsions with different alkylbenzenes (toluene, ethylbenzene, butylbenzene or octylbenzene) as oil phase. We use microemulsions of varying composition with molar water to surfactant ratios 0≤W≤ 50 and droplet (water plus surfactant) volume fractions 10%≤φ≤50%. Using dielectric spectroscopy, a percolation transition is observed in w/o microemulsions with butylbenzene or octylbenzene. With increasing molecular weight of the alkylbenzene, the percolation temperature T(P) decreases. The structure of the microemulsions is determined by small angle X-ray scattering (SAXS). With increasing molar weight of the alkylbenzene, the stability range of the L(2) droplet phase extends to higher W. The larger amount of solubilizable water can be related to variable oil penetration of the AOT monolayer, which affects the spontaneous curvature of the surfactant shell.     

适用于稀土离子提取的微乳液的制备及其提取条件初探

研究了由表面活性剂、油性溶剂及盐酸水溶液制备的油包水 (W/O)型微乳液对稀土离子RE3 +从料液相 (水相 )提取到微乳相中的行为 ,初步考察了表面活性剂浓度、水乳比、温度及载体浓度对提取率的影响 ,从而确定了适于稀土离子提取的微乳体系及提取条件。     

A study of identifying the emulsion type of surfactant: volume balance value

A new method for identifying the emulsion type of surfactant is introduced--volume balance value, that is, the ratio of hydrophilic group and hydrophobic group volumes in surfactant. The radius used in the volume for the VB value comes from the Pauling radius based on quantum chemistry. The result shows that the surfactant is an o/w emulsifying agent and water-soluble when the VB is more than 1, and is a w/o emulsifying agent and oil-soluble when the VB is less than 1. The VB value possesses additivity.     

SEMICONTINUOUS EMULSION POLYMERIZATION OF VINYL ACETATE X. KINETICS OF HOMOPOLYMERIZATION,CO POLYMERIZATION,AND INITIATOR DECOMPOSITION IN THE PRESENCE OF SULFOSUCCINATE-TYPE SURFACTANTS

ABSTRACT

Miorocrystalline cellulose stabilized emulsions (o/w) were evaluated by means of brightfield and polarized light microscopy, freeze-etch electron microscopy, droplet size analyses and rheologic measurements. These studies indicated that miorocrystalline cellulose (Avicel RC591 ) forms a network around emulsified oil droplets. This structure provides a mechanical barrier at the o/w interface which stabilizes the emulsion without the necessity for decreasing interfacial tension, as in conventional surfactant-stabilized emulsions. Rheologic studies indicated that emulsions containing Avicel RC591 had a considerable degree of thlxotropy which contributed to their stability. When Tween 80 was incorporated in this system, oil droplets coalesced indicating that the stability of the emulsion was affected adversely.     

Sol-Emulsion-Gel Synthesis of Shaped Powders in the System BaO-TiO2

Shaped tetragonal barium titanate (BaTiO₃) particles were prepared by the sol-emulsion-gel method with systematic variation of the concentration of a non-ionic surfactant in the organic phase (oil phase) of water-in-oil (w/o) emulsions above or below the critical micelle concentration (CMC). An acetate-based sol with equivalent oxide ratio BaO : TiO₂ = 1 : 1 was selected for the study. Micelle formation of the surfactant and their self-aggregation apparently played an important role in controlling the shape and size of the droplets and accordingly shape and size of the final barium titanate particles resulting therefrom. Transmission electron microscopy (TEM) revealed that with low concentration of the surfactant (2–5 vol%) ill-formed spheres were obtained. Spherical particles were formed with increasing the surfactant concentration to 7 vol%. At 12 vol% of the surfactant, rod-like particles were first found to form, which with further increase in surfactant concentration to 15–20 vol%, gradually transformed to cube-like/lamellar type particles. Attempts have been made to explain the various particle shapes in terms of surfactant aggregation.     

分散体系形成中表面活性剂使用量的判据

通过对甲苯等有机溶剂/水/表面活性剂体系的水基化分散,利用MalvernMicroplus型激光粒度仪对乳化后的分散相粒子大小及其分布进行研究.结果表明,表面活性剂的使用量对分散结果的影响具有局限性,对于具体体系,表面活性剂的临界胶束浓度[CMC(CMC_O+CMC_W)是这种局限性的量化标志,超出CMC的表面活性剂是多余的,对最终的分散结果无作用,同时也会影响分散体系的稳定性.