Glucose-based surfactants with hydrogenated, fluorinated, or hemifluorinated tails: synthesis and comparative physical-chemical characterization

(Hemi)fluorinated hydrophobic chains have been found to minimize the denaturating propensity of surfactants toward membrane proteins. The work reported herein deals with the synthesis of a new series of non-ionic glucose-based surfactants endowed with a hybrid hemifluorocarbon chain. The convergent synthesis is based on a one-pot reduction/alkylation of hemifluorinated thioacetate and glucosylated trishydroxymethyl acrylamidomethane using NaBH4 in methanol. This "mild" alkylation was studied in order to improve yields and to pass up the use of an excess of commercially unavailable hemifluorinated thiols. The physical-chemical properties in aqueous solution of this novel series were studied by surface tension measurement and dynamic light scattering (DLS), as well as their behavior upon reverse-phase chromatography, and were compared with those of their hydrogenated and perfluorinated analogues. The atypical effect of the additional ethyl tip to the fluorinated chain was demonstrated by higher critical micellar concentration values and abnormal hydrophobicities measured by reverse-phase chromatography. Moreover, according to Israelachvili's concept, DLS studies showed that surfactants bearing bulkier polar head self-assemble into small and well-defined aggregates, suggesting the formation of spherical micelles rather than the cylindrical ones usually observed with classical fluorinated surfactants.     

A theoretical analysis of micelle-mediated transport through porous membranes

A novel method is proposed for the purpose of controlled release of a sparingly water soluble compound. The solubility of a sparingly water soluble compound can be increased by addition of a sufficient amount of surfactant to form micelles. The flux of the compound across a porous membrane can be enhanced if the membrane has pores larger than the micelle size so that the compound-loaded micelles can diffuse simultaneously, and micelle-mediated transport occurs. The membrane permeability of the micelle is a monotonically decreasing function of the ratio of the size of the micelle to the membrane pore size (R_m/R_p). However, the solubilizing capacity of the micelle increases with increasing size of the micelle. These opposing effects influence the transport and may result in an optimum flux of the solubilizate at a particular size of the micelle. In the determination of the optimum surfactant molecule, the concept of the hydrophilic-lipophilic balance (HLB) is employed in order to have stable aqueous solutions of the surfactants. For a family of nonionic surfactants solubilizing the hydrophobic and hydrocarbon substance n-heptane, it is shown that there exists a maximum flux of the solubilizate at a value of R_m/R_p within the limitation of the HLB. The release rates over a long period of time are nearly constant for micelles close to the optimum size for a given pore size.     

Bonding strength of fluorinated and hydrogenated surfactant to bovine serum albumin

The interactions between bovine serum albumin (BSA) and different surfactants are investigated by the fluorescence technique. Pairs of fluorinated and hydrogenated surfactants with similar hydrophobic chain lengths including potassium perfluorooctanesulfonate and sodium octanesulfonate are studied in order to determine their interactions with BSA. The binding constants and thermodynamic parameters between BSA and different surfactants are compared and the main binding strength is determined. The mechanism of quenching and change of particle size gives rise to the binding force. Based on the FRET theory, the distances between potassium perfluorooctanesulfonate/sodium octanesulfonate and BSA are calculated and it is found that the fluorinated surfactant exhibits stronger interactions with proteins than the hydrogenated one, which is also proved by zeta potential and TEM.     

混合胶束中Gemini阳离子表面活性剂14-s-14与常规表面活性剂的协同作用:连接臂及反离子效应(英文)

The mixed micelle formation of binary cationic 14-s-14 gemini with conventional single chain surfactants was studied by conductivity measurements.The critical micelle concentration(cmc) and the degree of counterion binding values(g) of the binary systems were determined.The results were analyzed by applying regular solution theory(RST) to calculate micellar compositions(X),activity coefficients(f1,f2),and the interaction parameters(β).The synergistic interactions of all the investigated cationic gemini+conventional surfactant combinations were found to be dependent upon the length of hydrophobic spacer of the gemini surfactant.The excess Gibbs free energy of mixing was evaluated,and it indicated relatively more stable mixed micelles for the binary combinations.     

Soluble complexes of sodium poly(isoprene-b-methacrylate) micelles with cationic surfactants in aqueous media

Water-soluble complexes between sodium poly(isoprene-b-methacrylate) (NaIMA) amphiphilic block copolymer micelles and two cationic surfactants with different hydrophobic tail lengths, namely, dodecyltrimethylammonium bromide (DTMAB) and octyltrimethylammonium bromide (OTMAB), were prepared by mixing individual aqueous solutions of block copolymers and surfactants. The complexes were characterized in terms of size, overall charge, and micropolarity by dynamic light scattering, zeta-potential measurements, and fluorescence spectroscopy. Properties of the systems were investigated as a function of surfactant concentration and surfactant type and state in the initial solutions, as well as temperature. Experiments reveal surfactant complexation at the coronal sodium poly(methacrylate) (NaMA) chains, followed by an increase in mass and a decrease in size of the micelles. Complexation of individual surfactant micelles was observed when the DTMAB concentration in the starting solutions was higher than the surfactant cmc. The complexes show a temperature dependence of their dimension due to the hydrophobic effect.     

Segregation phenomena in micelles from mixtures of fluorinated and hydrogenated surfactants

Mixtures of hydrogenated and fluorinated surfactants are known to form either mixed or segregated micelles: the conclusions are much dependant on the precision of the experimental measurements and on the model used for interpretation. Recently, mixed surfactant solutions were probed at the micellar or molecular level by SANS, fluorescence or NMR. It leads to an intermediate structure for the mixed micelles with an intramicellar segregation of the fluorinated and hydrogenated surfactant.This intramicellar segregation was also observed in a variety of more complex systems which are rapidly surveyed in the second part.     

Protein-surfactant interaction: differences between fluorinated and hydrogenated surfactants

The interactions of proteins with fluorinated/hydrogenated surfactants were investigated by circular dichroism and turbidity measurement. Pairs of fluorinated and hydrogenated surfactants with similar critical micelle concentrations (cmc), including sodium perfluorooctanoate/sodium decylsulfate and lithium perfluorononanoate/sodium dodecylsulfate were compared in view of their interactions with proteins including BSA, lysozyme, β-lactoglobulin and ubiquitin. It was found that fluorinated surfactants exhibited stronger interactions with proteins than hydrogenated ones, which, however, depended on the structures of both proteins and surfactant molecules. If the proteins are very stable, or the surfactant–protein interactions are very strong, such differences between the two kinds of surfactants might be indistinguishable.     

Phase behavior in mixtures of cationic and anionic surfactants in aqueous solutions

Phase behavior of cationic/anionic surfactant mixtures of the same chain length (n=10, 12 or 14) strongly depends on the molar ratio and actual concentration of the surfactants. Precipitation of catanionic surfactant and mixed micelles formation are observed over the concentration range investigated. Coacervate and liquid crystals are found to coexist in the transition region from crystalline catanionic surfactant to mixed micelles.The addition of oppositely charged surfactant diminishes the surface charge density at the mixed micelle/solution interface and enhances the apparent degree of counterion dissociation from mixed micelles. Cationic surfactants have a greater tendency to be incorporated in mixed micelles than anionic ones.     

Sphere-to-rod transition of non-surface-active amphiphilic diblock copolymer micelles: a small-angle neutron scattering study

Micellization behavior of amphiphilic diblock copolymers with strong acid groups, poly(hydrogenated isoprene)-block-poly(styrenesulfonate), was investigated by small-angle neutron scattering (SANS). We have reported previously (Kaewsaiha, P.; Matsumoto, K.; Matsuoka, H. Langmuir 2005, 21, 9938) that this strongly ionic amphiphilic diblock copolymer shows almost no surface activity but forms micelles in water. In this study, the size, shape, and internal structures of the micelles formed by these unique copolymers in aqueous solution were duly investigated. The SANS data were well described by the theoretical form factor of a core-shell model and the Pedersen core-corona model. The micellar shape strongly depends on the hydrophobic chain length of the block copolymer. The polymer with the shortest hydrophobic chain was suggested to form spherical micelles, whereas the scattering curves of the longer hydrophobic chain polymers showed a q-1 dependence, reflecting the formation of rodlike micelles. Furthermore, the addition of salt at high concentration also induced the sphere-to-rod transition in micellar shape as a result of the shielding effect of electrostatic repulsion. The corona thickness was almost constant up to the critical salt concentration (around 0.2 M) and then decreased with further increases in salt concentration, which is in qualitatively agreement with existing theories. The spherical/rodlike micelle ratio was also constant up to the critical salt concentration and then decreased. The micelle size and shape of this unique polymer could be described by the common concept of the packing parameter, but the anomalously stable nature of the micelle (up to 1 M NaCl) is a special characteristic.     

The structure of metallomicelles

The morphology of micelles formed by two novel metallosurfactants has been studied by small-angle neutron scattering (SANS) and small-angle-X-ray scattering (SAXS). The two surfactants both contain a dodecyl chain as the hydrophobic moiety, but differ in the structure of the head group. The surfactants are Cu(II) complexes of monopendant alcohol derivatives of a) the face-capping macrocycle 1,4,7-triazacyclanonane (tacn), and b) an analogue based upon the tetraazamacrocycle 1,4,7,10-tetraazacyclododecane. Here, neutron scattering has been used to study the overall size and shape of the surfactant micelles, in conjunction with X-ray scattering to locate the metal ions. For the 1,4,7,10-tetraazacyclododecane-based surfactant, oblate micelles are observed, which are smaller to the prolate micelles formed by the 1,4,7-triazacyclononane analogue. The X-ray scattering analysis shows that the metal ions are distributed throughout the polar head-group region, rather than at a well-defined radius; this is in good agreement with the SANS-derived dimensions of the micelle. Indeed, the same model for micelle morphology can be used to fit both the SANS and SAXS data.     

Interaction of amphiphilic block copolymer micelles with surfactants

An out line and summary of literature studies on interactions between different types of amphiphilic copolymer micelles with surfactants has been given. This field of research is still emerging and it is difficult presently to make generalisations on the effects of surfactants on the copolymer association. The effects are found to be varied depending upon the nature and type of hydrophobic (hp) core and molecular architecture of the copolymers and the hydrocarbon chain length and head group of surfactants. The information available on limited studies shows that both anionic and cationic surfactants (in micellar or molecular form) equally interact strongly with the associated and unassociated forms of copolymers. The beginning of the interaction is typically displayed as critical aggregation concentration (CAC), which lies always below the critical micelle concentration of the respective surfactant. The surfactants first bind to the hydrophobic core of the copolymer micelles followed by their interaction with the hydrophilic (hl) corona parts. The extent of binding highly depends upon the nature, hydropobicity of the copolymer molecules, length of the hydrocarbon tail and nature of the head group of the surfactant. The micellization of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO)–poly(ethylene oxide) was found to be suppressed by the added surfactants and at higher surfactant concentrations, the block copolymer micelles get completely demicellized. This effect was manifested itself in the melting of liquid crystalline phases in the high copolymer concentrations. However, no such destabilization was found for the micelles of polystyrene (PS)–poly(ethylene oxide) copolymers in water. On the contrary, the presence of micellar bound surfactant associates resulted in to large super micellar aggregates through induced intra micellar interactions. But with the change in the hydrophobic part from polystyrene to poly(butadiene) (PB) in the copolymer, the added surfactants not only reduced the micellar size but also transformed cylindrical micelles to spherical ones. The mixtures in general exhibited synergistic effects. So varied association responses were noted in the mixed solutions of surfactants and copolymers.     

Temperature‐Dependent Atomic Models of Detergent Micelles Refined against Small‐Angle X‐Ray Scattering Data

Surfactants have found a wide range of industrial and scientific applications. In particular, detergent micelles are used as lipid membrane mimics to solubilize membrane proteins for functional and structural characterization. However, an atomic‐level understanding of surfactants remains limited because many experiments provide only low‐resolution structural information on surfactant aggregates. In this work, small‐angle X‐ray scattering is combined with molecular dynamics simulations to derive fully atomic models of two maltoside micelles at temperatures between 10 °C and 70 °C. The micelles take the shape of general tri‐axial ellipsoids and decrease in size and aggregation number with increasing temperature. Density profiles of hydrophobic groups and water along the three principal axes reveal that the minor micelle axis closely mimics lipid membranes. The results suggest that coupling atomic simulations with low‐resolution data allows the structural characterization of surfactant aggregates.     

Controlling the melting of kinetically frozen poly(butyl acrylate-b-acrylic acid) micelles via addition of surfactant

We have studied the melting of polymeric amphiphilic micelles induced by small-molecule surfactant and explained the results by experimental determination of the interfacial tension between the core of the micelles and the surfactant solutions. Poly(n-butyl acrylate-b-acrylic acid) (PBA-b-PAA) amphiphilic diblock copolymers form kinetically frozen micelles in aqueous solutions. Strong interactions with surfactants, either neutral or anionic [C12E6, C6E4, sodium dodecyl sulfate (SDS)], were revealed by critical micelle concentration (cmc) shifts in specific electrode and surface tension measurements. Since both polymer and surfactant are either neutral or bear negative charges, the attractive interactions are not due to electrostatic interactions. Light scattering, neutron scattering, and capillary electrophoresis experiments showed important structural changes in mixed PBA-b-PAA/surfactant systems. Kinetically frozen micelles of PBA-b-PAA, that are hardly perturbed by concentration, ionization, ionic strength, and temperature stresses, can be disintegrated by addition of small-molecule surfactants. The interfacial energy of the PBA in surfactant solutions was measured by drop shape analysis with h-PBA homopolymer drops immersed in small-molecule surfactant solutions. The PBA/water interfacial energy gammaPBA/H2O of 20 mN/m induces a high energy cost for the extraction of unimers from micelles so that PBA-b-PAA micelles are kinetically frozen. Small-molecule surfactants can reduce the interfacial energy gammaPBA/solution to 5 mN/m. This induces a shift of the micelle-unimer equilibrium toward unimers and leads, in some cases, to the apparent disintegration of PBA-b-PAA micelles. Before total disintegration, polymer/surfactant mixtures are dispersions of polydisperse mixed micelles. Based on core interfacial energy arguments, the disintegration of kinetically frozen polymeric micelles was interpreted by gradual fractionation of objects (polydisperse dispersion mechanism), whereas the disintegration of polymeric micelles in a thermodynamically stable state was interpreted by an exchange between a population of large polymer-rich micelles and a population of small surfactant-rich micelles (bidisperse dispersion mechanism). Finally, in our system and other systems from the literature, interfacial energy arguments could explain why the disintegration of polymer micelles is either partial or total as a function of the surfactant type and concentration and the hydrophobic block molar mass of the polymer.     

CHARACTERIZATION OF THE SUB-MICELLAR SPECIES IN MIXED SURFACTANT SOLUTIONS I: MIXTURES OF SODIUM LAURYL SULFATE AND AN ALKYL POLYETHOXY SULFATE

The formation of micelles and the composition and concentration of sub-micellar components of surfactant solutions was studied for sodium lauryl sulfate (SLS), alkyl polyethoxy (average of 7 EO) sulfate (AEOS 7EO) and mixtures of these two anionic surfactants both above and below the critical micelle concentrations (c.m.c). Radiolabeled surfactant was added to the solutions to follow the concentration and identity of the components. To separate micelles from sub-micellar components, an Amicon microfiltration apparatus containing either a 2, 5, or 30 thousand molecular weight cut off membrane was used. Results using a hydrophobic fluorescent probe demonstrated minimal disruption of the micelles during separation. Separations for single surfactants showed breaks in the concentration curves at the c.m.c. The observed sub-micellar composition and concentration were evidence of non-ideal behavior. Concentration dependence and surfactant selectivity in micellization (the “micro c.m.c.”phenomena) is described. This previously undocumented behavior reveals that the compositions of micelles and the sub-micellar phase for mixed surfactant systems do not reflect the composition of the original solution mixture.     

Mixed fluorinated-hydrogenated surfactant-based system: preparation of ordered mesoporous materials

We have investigated a mixed fluorinated-hydrogenated surfactant-based system [C8F17C2H4(OC2H4)9-C12H25(OC2H4)8] in water. The phase diagram exhibits that the micellar domain can be divided into three parts: above 80 wt% of water both hydrogenated and fluorinated surfactants are completely miscible and they formed mixed micelles in all proportion. When the water concentration is decreased from 80 to 60 wt% a gap of miscibility appears and two micellar zones, one fluorocarbon-rich micelles and one hydrocarbon-rich micelles are observed. The liquid crystal domain is composed of one fluorocarbon-rich (H(F)(1)) and one hydrocarbon-rich (H(H)(1)) hexagonal phase. The hydrophobic radius and the cross-sectional area remain constant in the H(H)(1) and in the H(F)(1) domains. Moreover, SAXS measurements proved that the hydrophobic chains in the liquid crystal phases adopt rather an extended conformation. Then the mixture of surfactants was used as template for the preparation of mesoporous materials. Mesostructured silicas with a well hexagonal array of their channels were prepared via a cooperative templating mechanism (CTM), if the loading of fluorinated surfactant is larger than 50%. Decreasing the proportion of the fluorinated amphiphile in the mixture leads to the formation of mesoporous silica with a disordered structure. In this case the channel arrangement is no longer governed by the fluorinated surfactant but by the hydrogenated one.     

Microstructure of un-neutralized hydrophobically modified alkali-soluble emulsion latex in different surfactant solutions

At low pH conditions and in the presence of anionic, cationic, and nonionic surfactants, hydrophobically modified alkali-soluble emulsions (HASE) exhibit pronounced interaction that results in the solubilization of the latex. The interaction between HASE latex and surfactant was studied using various techniques, such as light transmittance, isothermal titration calorimetry, laser light scattering, and electrophoresis. For anionic surfactant, noncooperative hydrophobic binding dominates the interaction at concentrations lower than the critical aggregation concentration (CAC) (C < CAC). However, cooperative hydrophobic binding controls the formation of mixed micelles at high surfactant concentrations (C > or = CAC), where the cloudy solution becomes clear. For cross-linked HASE latex, anionic surfactant binds only noncooperatively to the latex and causes it to swell. For cationic surfactant, electrostatic interaction occurs at very low surfactant concentrations, resulting in phase separation. With further increase in surfactant concentration, noncooperative hydrophobic and cooperative hydrophobic interactions dominate the binding at low and high surfactant concentrations, respectively. For anionic and cationic surfactant systems, the CAC is lower than the critical micelle concentration (CMC) of surfactants in water. In addition, counterion condensation plays an important role during the binding interaction between HASE latex and ionic surfactants. In the case of nonionic surfactants, free surfactant micelles are formed in solution due to their relatively low CMC values, and HASE latexes are directly solubilized into the micellar core of nonionic surfactants.     

Hydrolysis of 2,4-Dinitrochlorobenzene Catalyzed by Cationic Micelles

Micellar catalysis by nine cationic surfactants of the basic hydrolysis of 2,4-dinitrochlorobenzene(DNCB) was studied. The results obtained are as follows: (I) The second-order constants k₂ for the hydrolysis reaction of DNCB catalized by the cationic micelles increase by a factor of 11–100 than that in water. Plots of k₂ against the surfactant concentration show an S-type curve, and the catalytic effect is observed below the critical micelle concentration(CMC) of the surfactants. (2) For a series of surfactants, there is an optimal chain length for the alkyl of the surfactants to show the greatest catalytic effect. (3) The hydrolysis rate of DNCB decreases as the base concentration increases. (4) For the surfactants with the same hydrophilic and hydrophobic groups, chlorides have advantage over bromides in enhancing the reaction rate. These results can be interpreted in term of the changes in CMC, micelle size, solubilization capacity of the micelles, binding degree of counterion et al.     

Degree of micelle ionization and micellar growth for gemini surfactants detected by 6-methoxy-N-(3-sulfopropyl)quinolinium fluorescence quenching

The degree of micelle ionization of gemini surfactants has been investigated by using halide-sensitive fluorescence probes (e.g., 6-methoxy-N-(3-sulfopropyl)quinolinium (SPQ)). The fluorescence is quenched by the free bromide ions dissociated from surfactants. The degree of micelle ionization increased with increasing spacer chain length, but it decreased with increasing surfactant concentration. The Stern-Volmer plot gave two inflection points (i.e., not only at the cmc but also far above the cmc). The second inflection point suggested spherocylindrical micellar growth with decreases in the degree of micelle ionization. The spherocylindrical micellar growth was depressed with increasing spacer chain length, whereas it was enhanced with increasing tail chain length. The degree of micelle ionization of spherocylindrical micelles depended on the concentration and chain length of gemini surfactants. The change in SPQ fluorescence spectra upon hydrogenation was utilized to evaluate the solubilization site in micelle solutions. The dissolved SPQ in water was instantly reduced by the addition of NaBH4, resulting in abrupt changes in fluorescence intensity and spectral shift. All of the SPQ in micelle solution was also instantly reduced by NaBH4, indicating the existence of SPQ in the water bulk phase, but its fluorescence intensity increased upon the solubilization of hydrogenated SPQ into micelles.     

Phase behaviour of lyotropic liquid crystalline side chain polymers in aqueous solutions

Amphiphilic lyotropic liquid crystalline surfactants are synthesized displaying 10-undecenoic acid as hydrophobic and ethyleneglycol units as hydrophilic parts of the molecules. By addition reaction of the monomeric surfactants with poly [oxy(methylsilylene)], the surfactants are attached as side chains to the siloxane main chain. The phase behaviour of a polymer-water system and the corresponding monomer-water system is investigated by polarizing microscopy. The monomeric surfactant exhibits a liquid crystallineM ₁-phase of hexagonally packed, rod-like micelles in a concentration range of 49 to 70% surfactant. The liquid crystalline state of the polymeric surfactant is more stable, which is indicated by a broader temperature- and concentration range (35%–90% polymer surfactant). At lower concentration aM ₁-phase exists, which is separated by a cubic phase from a lamellarG-phase at higher concentration of the polymer surfactant. Compared to the monomeric system, the increased stability of the polymeric mesophase can be understood by the restriction of motions of the amphiphiles due to the linkage to the polymer main chain.Dedicated to Prof. Dr. F. H. Müller.The authors are greatly indebted to Wacker Chemie, D-Burghausen, FRG for kindly delivering the poly(hydrogensiloxane).     

Aggregation properties of diacyl lysine surfactant compounds: hydrophobic chain length and counterion effect

In this paper, we report on the study of aqueous solution and aggregation properties of diacyl Lysine surfactant salts with several surfactant counterions at a fixed hydrophobic chain length. They present a critical micellar concentration nearly independent of the counterion. The area per surfactant molecule is around 1.3 nm (2) also independent of the counterion. We have also studied the dry state crystallization of these surfactant salts. We show that small counterion systems tend to form bicontinuous cubic structures and that the increase in counterion size tends to form lamellar structures. We have compared this behavior with the dry state crystallization of the diacyl Lysine surfactants as a function of hydrophobic chain length. For long hydrophobic chains, the crystal structure is lamellar, while for intermediate, length is cubic. Among the structures studied, the one with the shortest chain length crystallizes in a hexagonal inverse phase.