Über die Übertragungseinheiten und ein „Vierfelderdiagramm” zur Berechnung von Wärmeübertragern

Zusammenfassung Es wird dargelegt, wie man nach Einführung des bekannten Begriffes Übertragungseinheit und mit Hilfe eines Vierfelderdiagramms zu einer relativ einfachen und durchsichtigen Berechnung von Gleich- und Gegenstrom-Wärmeübertragern gelangt.

---

On transfer units and a four-quadrant-diagram for the calculation of heat exchangers

It is shown that the introduction of the known concept of a transfer unit and the use of a four-quadrant diagram leads to a relatively simple and clear computation method for co-current and counter-current heat exchangers.

     

Design of a Beam with Controllable Force Elements

A method for solving the problem of design of an intellectual structure formulated for the pair optimal position of actuators, optimal control of actuators is developed. In the method proposed, physical and logical objects are treated as equivalent.     

An extension of Reiner's “Deborah Number” concept to a Wide field of rheological investigations

Summary Reiner defined a numeric, which he called theDeborah Number to represent the ratio of a relaxation time to a natural (observation) time. This implies aMaxwell model but is readily extended to complete relaxation spectra. Similar Numbers are proposed for retardation times and also for some conditions of coagulation thixotropy and for data from certain psychophysical experiments.     

Studies of Mental “Noise”

Successive tests of subjects' performance in reaction time tasks were treated as time series and submitted to spectrum analysis. Rather than revealing the white noise expected by the view that variability is due to random error (equivalent power across frequency), the power spectra revealed colored noise. The slopes of the power spectra did not vary much for tasks differing in memory requirements. Spectrum analysis of time series from the logistic map also showed colored noise in regions on the edge of chaos, showing that the presence of colored noise in cognitive data need not oblige a theoretical account based on a complex, high-dimensional, system.     

On the sensitive dynamical system and the transition from the apparently deterministic process to the completely random process

The detailed analysis of the dynamical process of coin tossing is made. Through calculations, it is illustrated how and why the result is extremely sensitive to the initial conditions. It is also shown that, as the initial height of the mass center of the coin increases, the final configuration, i.e. head or tail, becomes more and more sensitive to the initial parameters (the initial velocity angular velocity, and the initial orientation), the coefficient of the air drag, and the energy absorption factor of the surface on which the coin bounces. If we keep the head upward initially but allow a small range for the change of some other initial parameters, the frequency that the final configuration is head, would be 1 if the initial height h of the mass center is sufficiently small, and would be clo to 1/2 if h is sufficiently large. An interesting question is how this frequency changes continuously from 1 to 1/2 as h increases. Detailed calculations show that such a transition is very similar to the transition from laminar to turbulent flows. A basic difference between the transition stage and the completely random stage is indicated: In the completely random stage, the deterministic process of the individual case is extremely sensitive to the initial conditions and the dynamical parameters, out the statistical properties of the ensemble are insensitive to the small changes of the initial conditions and the dynamical parameters. On the contrary, in the transition stage, both the deterministic process of the individual case and the statistical properties of the ensemble are sensitive to the initial conditions and the dynamical parameters. The mechanism for this feature of the transition stage is the existence of the long-train structure in the parameter space. The illuminations of this analysis on some other random phenomena are discussed.     

Electric and thermal conductivity anisotropy of an articulated medium

It is well known that articulation may cause the electric and thermal conducting properties of a medium to become anisotropic. Extensive experimental data relating to the conductivity of rock were presented in [1], and according to these data the ambient resistance in the case of an orderly arrangement of cracks noticeably depends on the direction along which it is measured; an ellipsoid of resistance anisotropy can be constructed from the measurement results. A pronounced correlation between the orientations of the resistivity extrema and the orientation of the crack system is observed here. A comparison betwen the direction rose of the fractures and the direction rose of the articulation carried out for different regions has shown that they are identical. A crack density tensor T describing the average (with respect to a given volume) geometry of the articulation has been introduced [2, 3]. In the current work, it is proved that T can be effectively used in problems involving anisotropic electrical and thermal conductivity. The resistivity tensor and thermal-conductivity coefficient tensor K, which characterize the anisotropy of the electrical and thermal conducting properties, are expressed in terms of t. The structure of this relation is established; the equations presented allow us to find the form of and K if the articulation parameters are known.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 141–144, January–February, 1976.     

Whose Thoughts Are They, Anyway? Dimensionally Exploding Bion's “Double-Headed Arrow” into Coadapting, Transitional Space

The physics and biology that found psychoanalysis account for discontinuous experience only in the presence of nonmeasurable, metaphysical operators; these include the ego and its subsystems as well as biological experience inherited through Lamarckian principles. Complex, self-organizing systems, however, can link biology to experience without metaphysics. They can also account for psychoanalytically relevant behaviors without appealing to stable internal representations. These behaviors include what W. R. Bion called transformation in O and its corollary, the appearance of the selected fact. By dimensionally exploding the double-headed arrow that he used to link the states Ps and D in his model for thinking (Ps D), we can generate a space that is, at once, psychoanalytically imaginal and dynamically coadapting. Isomorphic to D. W. Winnicott's transitional space, it is self-organizing. It is describable according to dynamics formulated by W J. Freeman, S. Kauffman and C. Langton and it can generate instantaneous conscious contents by way of a selective process analogous to spatio-temporal binding. As a whole, this model supports a clinical stance advanced by D. W. Winnicott as play, within transitional space.     

On linear versus nonlinear flow rules in strain localization analysis

Summary This note contains some remarks on the analysis of bifurcation phenomena, specifically strain localization (onset of a strain rate discontinuity), in small-deformation elastoplasticity. Nonassociative flow rules are allowed for to cover constitutive models frequently adopted for frictional (and softening) materials such as concrete. The conventional derivation of the localization criterion resting on an incrementally linear comparison material is critically reviewed and compared to the criterion resulting from actual nonlinear plastic flow laws.

---

Sommario Si svolgono alcune considerazioni sui fenomeni di biforcazione in solidi elastoplastici in regime di piccole deformazioni (di linearità geometrica) e precisamente sul manifestarsi di localizzazioni intese come discontinuità nel campo delle deformazioni incrementali. Si considerano leggi nonassociate. Vengono così inclusi nella trattazione modelli costitutivi frequentemente adottati per descrivere il comportamento di materiali ad attrito interno e soggetti a danneggiamento (nel senso di degrado di rigidezze elastiche in seguito a deformazioni anelastiche), oltre che soggetti a manifestazioni di instabilità per incrudimento negativo (softening). Si esamina criticamente il criterio, frequentemente adottato in letteratura, di localizzazione fondato su materiale di confronto incrementalmente lineare e si fornisce, corredato da osservazioni comparative, il criterio che risulta dall'assunzione del modello di materiale incrementale non lineare

     

Group Classification of Equations of the Form y″ = f(x,y)

The problem of classification of ordinary differential equations of the form y = f(x,y) by admissible local Lie groups of transformations is solved. Standard equations are listed on the basis of the equivalence concept. The classes of equations admitting a oneparameter group and obtained from the standard equations by invariant extension are described.     

Particle-in-a-box study of the evolution of an ion-acoustic shock wave

In an analysis of a one-dimensional numerical model of a nonisothermal plasma it is shown that an ion-acoustic shock wave of subcritical amplitude separates a soliton from the shock front after the reversing stage. This process is accompanied by turbulent flow behind the front and by trapping of ions in potential wells. The numerical particle-in-a-box method is being used widely to study plasma phenomena. One field in which this method has been found fruitful is in the study of a nonisothermal plasma, characterized by an ion-acoustic wave branch.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 3, pp. 3–5, May–June, 1971.The authors thank R. Z. Sagdeev for support and interest in this study.     

Application of the method of integral diffusion to investigation of turbulent transfer

A number of authors have critically examined semiempirical mixing length theories [1]. A defect of these theories is connected with the fact that the magnitude of the mixing length, which is assumed to be small in constructing the theory, turns out in experiments to be comparable with the characteristic dimensions of the flow region. Thus, the concept of volume convection [2–4] or integral diffusion [5], which is understood to be a transfer mechanism in which the friction stress is not expressed in terms of the velocity gradient, is introduced along with the concept of gradient diffusion. In addition, there are a number of experimental papers [6] in which it is shown that the turbulent friction stress cannot be equal to zero at the place in the flow where the derivative of the velocity is equal to zero. Mixing length theory does not describe this effect.It is possible to generalize mixing length theory [7–9] in a way which eliminates these defects. Flow of an incompressible fluid is considered.     

The theory of a vibrating-rod densimeter

The paper presents a theory of a device for the accurate determination of the density of fluids over a wide range of thermodynamic states. The instrument is based upon the measurement of the characteristics of the resonance of a circular section tube, or rod, performing steady, transverse oscillations in the fluid. The theory developed accounts for the fluid motion external to the rod as well as the mechanical motion of the rod and is valid over a defined range of conditions. A complete set of working equations and corrections is obtained for the instrument which, together with the limits of the validity of the theory, prescribe the parameters of a practical design capable of high accuracy.Nomenclature A, B, C, D constants in equation (60) - A _j , B _j constants in equation (18) - a _j ⁺ , a _j ^– wavenumbers given by equation (19) - C _f drag coefficient defined in equation (64) - C _f ^/0 , C _f ^/1 components of C _f in series expansion in powers of - c speed of sound - D _b drag force of fluid b - D ₀ coefficient of internal damping - E extensional modulus - force per unit length - F _j ⁺ , F _j ^– constants in equation (24) - f, g functions of defined in equations (56) - G modulus of rigidity - I second moment of area - K constant in equation (90) - k, k constants defined in equations (9) - L half-length of oscillator - Ma Mach number - m _a mass per unit length of fluid a - m _b added mass per unit length of fluid b - m _s mass per unit length of solid - n _j eigenvalue defined in equation (17) - P power (energy per cycle) - P _a , P _b power in fluids a and b - p pressure - R radius of rod or outer radius of tube - R _c radius of container - R _i inner radius of tube - r radial coordinate - T tension - T _visc temperature rise due to heat generation by viscous dissipation - t time - v _r , v radial and angular velocity components - y lateral displacement - z axial coordinate - dimensionless tension - _a dimensionless mass of fluid a - _b dimensionless added mass of fluid b - _b dimensionless drag of fluid b - dimensionless parameter associated with - ₀ dimensionless coefficient of internal damping - dimensionless half-width of resonance curve - dimensionless frequency difference defined in equation (87) - spatial resolution of amplitude - R, , , _s , increments in R, , , _s , - dimensionless amplitude of oscillation - dimensionless axial coordinate - ratio of to - _a , _b ratios of to for fluids a and b - angular coordinate - parameter arising from distortion of initially plane cross-sections - _f thermal conductivity of fluid - dimensionless parameter associated with - viscosity of fluid - _a , _b viscosity of fluids a and b - dimensionless displacement - _j jth component of - density of fluid - _a , _b density of fluids a and b - _s density of tube or rod material - density of fluid calculated on assumption that * - dimensionless radial coordinate - * dimensionless radius of container - dimensionless times - _{rr rr}, _r radial normal and shear stress components - spatial component of defined in equation (13) - _j jth component of - dimensionless streamfunction - ⁰, ¹ components of in series expansion in powers of - phase angle - _r phase difference - _ra , _rb phase difference for fluids a and b - streamfunction - _j jth component defined in equation (22) - dimensionless frequency (based on ) - _a , _b dimensionless frequency in fluids a and b - _s dimensionless frequency (based on _s ) - angular frequency - ₀ resonant frequency in absence of fluid and internal damping - _r resonant frequency in absence of internal fluid - _ra , _rb resonant frequencies in fluids a and b - dimensionless frequency - dimensionless frequency when _a vanishes - dimensionless frequencies when _a vanishes in fluids a and b - dimensionless resonant frequency when _a , _b, _b and ₀ vanish - dimensionless resonant frequency when _a , _b and _b vanish - dimensionless resonant frequency when _b and _b vanish - dimensionless frequencies at which amplitude is half that at resonance     

An “ideal equivalent gas method” for the study of shock waves in supersonic real gas flows

Summary A method developed by the author for the systematic study of the thermodynamic and dynamic properties of the gas behind a shock wave is reported.The method is applicable to supersonic flow regimes for which the excitation, dissociation and ionization effects invalidate the usually adopted hypothesis of ideal gas.An Ideal Equivalent Gas, having the ratio of the specific heats _s dependent on Mach number and altitude of flight is postulated.On the basis of the mass, momentum and energy conservation equations, valid through the shock wave, the relations defining the thermodynamic and dynamic state of the gas behind the shock wave are derived. These relations establish an extension of the classic relations valid for the ideal gas and reduce to them identically for _s=.The dependence of the ratio of specific heats _s of the Ideal Equivalent Gas on Mach number and altitude has been established, over a wide range, on the basis of the real gas solutions derived by Huber.

---

Sommario Nella presente nota viene esposto un metodo sviluppato dall'autore per lo studio sistematico dello stato termodinamico e dinamico del gas a valle di un'onda d'urto in regime supersonico, allorchè cioè gli effetti dell'eccitazione dei gradi di libertà vibrazionali delle molecole e della loro dissociazione e successiva ionizzazione invalidano l'ipotesi di gas ideale generalmente adottata.Viene definito un gas ideale equivalente avente rapporto dei calori specifici _s funzione del numero di Mach e della quota di volo ed in base alle equazioni di conservazione della massa, della quantità di moto e dell'energia, valide attraverso all'onda d'urto, vengono derivate delle relazioni definenti lo stato termodinamico e dinamico del gas a valle dell'onda d'urto. Tali relazioni costituiscono una estensione delle classiche relazioni dell'urto valide per il gas ideale alle quali si riducono per _s=.La dipendenza del rapporto dei calori specifici _s del gas ideale equivalente, dal numero di Mach e dalla quota è stata stabilita sulla base delle soluzioni ottenute da Huber per il gas reale.

---

     

First order phase equilibrium for classical bodies

Summary In this note the Author gives a general and unified treatment of first order phase equilibria for classical bodies like those considered by Truesdell and Toupin in[3].The Author reaches a system of partial differential equations (generalized Clapeyron equations) the conditions of whose solution are shown always to be satisfied.In particular, the Author derives the equations governing the polarized phase equilibrium for a fluid.Besides the equations ruling the phase equilibrium for a two phase n-component fluid mixture are given and the equivalence with the statical Gibbs-Duhem relation is shown.

---

Sommario In questa nota l'Autore presenta una trattazione generale ed unificata degli equilibri di fase del primo ordine per corpi classici come quelli definiti da Truesdell e Toupin in[3].L'Autore perviene ad un sistema di equazioni alle derivate parziali (equazioni di Clapeyron generalizzate) del quale si dimostra la integrabilità.In particolare, si deducono le equazioni che governano gli equilibri di fase polarizzati.Inoltre si ottengono le equazioni che regolano l'equilibrio di fase per una miscela fluida a n componenti; in questo caso si dimostra l'equivalenza delle equazioni con la relazione statica di Gibbs-Duhem.

---

---

This work was supported by the Gruppo Nazionale per la Fisica Matematica of C.N.R.     

The effect of the sheet rigidity on strength of the spot weld tension shear joint

This paper presents some test and analysis results for a spot welded joint subjected to tensile and alternate load. The effect of sheet rigidity on the tensile strength and fatigue life of the spot welded joint is studied by using the stress intensity factorsK _I,K _II,K _III and an effective stress intensity factor K_max calculated by the finite element method for crack around the nugget. The results show that the effective stress intensity factor K_max is an essential parameter for estimating the fatigue life of the spot welded joint.     

Similar solutions and the asymptotics of filtration equations

In this paper we consider the asymptotic behavior of solutions of the quasilinear equation of filtration as t. We prove that similar solutions of the equation u _t = (u )_xx asymptotically represent solutions of the Cauchy problem for the full equation u _t = [(u)]_xx if (u) is close to u for small u.     

Nonlinear rheological behavior of a concentrated spherical silica suspension

Linear and nonlinear viscoelastic properties were examined for a 50 wt% suspension of spherical silica particles (with radius of 40 nm) in a viscous medium, 2.27/1 (wt/wt) ethylene glycol/glycerol mixture. The effective volume fraction of the particles evaluated from zero-shear viscosities of the suspension and medium was 0.53. At a quiescent state the particles had a liquid-like, isotropic spatial distribution in the medium. Dynamic moduli G^* obtained for small oscillatory strain (in the linear viscoelastic regime) exhibited a relaxation process that reflected the equilibrium Brownian motion of those particles. In the stress relaxation experiments, the linear relaxation modulus G(t) was obtained for small step strain (0.2) while the nonlinear relaxation modulus G(t, ) characterizing strong stress damping behavior was obtained for large (>0.2). G(t, ) obeyed the time-strain separability at long time scales, and the damping function h() (–G(t, )/G(t)) was determined. Steady flow measurements revealed shear-thinning of the steady state viscosity () for small shear rates (< ^–1; = linear viscoelastic relaxation time) and shear-thickening for larger (>^–1). Corresponding changes were observed also for the viscosity growth and decay functions on start up and cessation of flow, + (t, ) and _– (t, ). In the shear-thinning regime, the and dependence of ₊(t,) and _–(t,) as well as the dependence of () were well described by a BKZ-type constitutive equation using the G(t) and h() data. On the other hand, this equation completely failed in describing the behavior in the shear-thickening regime. These applicabilities of the BKZ equation were utilized to discuss the shearthinning and shear-thickening mechanisms in relation to shear effects on the structure (spatial distribution) and motion of the suspended particles.Dedicated to the memory of Prof. Dale S. Parson     

Closure of microcracks during unloading and the formation of reverse dislocations

Conclusion During unloading, local closure of the crack is followed by the emission of the first pair of reverse dislocations. The formation of an area of local contact during unloading occurs with a bang; the critical SIF of the external loads at this moment coincides with the value of the overall SIF of the field of the primary sessile dislocations. There is always a free gap between the crack tip and the area of local contact. External loads acting in the crack plane and not resulting in a stress concentration at the crack front play an important role in the emission of reverse dislocations (in particular, they may block their departure from the S-structure).Pacific Oceanological Institute, Academy of Sciences of the USSR, Vladivostok. Translated from Prikladnaya Mekhanika, Vol. 24, No. 7, pp. 3–18, July, 1988.     

Nonlinear analysis of the forced response of a beam with three mode interaction

An analysis is presented for the primary resonance of a clamped-hinged beam, which occurs when the frequency of excitation is near one of the natural frequencies,_n . Three mode interaction (₂ 3₁ and _{3 1} + 2₂) is considered and its influence on the response is studied. The case of two mode interaction (₂ 3₁) is also considered to compare it with the case of three mode interaction. The straight beam experiencing mid-plane stretching is governed by a nonlinear partial differential equation. By using Galerkin's method the governing equation is reduced to a system of nonautonomous ordinary differential equations. The method of multiple scales is applied to solve the system. Steady-state responses and their stability are examined. Results of numerical investigations show that there exists no significant difference between both modal interactions' influences on the responses.     

Shock Waves in a Fluid with Bubbles Containing Evaporating Drops of a Liquefied Gas

The propagation and reflection of one-dimensional plane unsteady waves and pulses in a mixture of a fluid with two-phase bubbles containing evaporating drops is investigated. A significant effect of unsteady evaporation of the drops in the zone ahead of the shock wave on the wave propagation is demonstrated. The evaporation of the drops results in a pressure increase ahead of the wave and the shock wave as it were climbs to increasing pressure level. In contrast to bubbly fluids with single-phase bubbles, in a fluid with two-phase bubbles, at a fixed phase volume fraction, a decrease in bubble size results in an increase rather than a decrease of the oscillation amplitude. The wave reflection from a solid wall is essentially nonlinear and the maximum pressure attained at the wall is several times greater than the incident-wave intensity.