Sorption and diffusion of 90Sr2+in compacted bentonite investigated by a capillary method

Summary The effects of bentonite density and fulvic acid on the sorption and diffusion of ⁹⁰Sr²⁺in compacted bentonite were investigated by using a capillary method. The experiments were carried out at pH 7.0±0.1 in the presence of 0.01M NaClO₄. The results suggest that the sorption and diffusion of ⁹⁰Sr²⁺in compacted bentonite decreases with increasing the density of compacted bentonite. The presence of FA enhances the sorption of Sr²⁺, but reduces the diffusion of Sr²⁺in compacted bentonite. The porosity of the compacted bentonite plays an important role in the sorption and diffusion behavior of ⁹⁰Sr²⁺. Using the calculated effective diffusion coefficients the long-term relative concentration distribution of strontium was evaluated in compacted bentonite.     

Modelling of the Sorption of Sr(II) on Hydrous Zirconium Oxide

The amphoteric acid-base behavior of hydrous zirconium oxide (HZO) was investigated by titrating HZO with 0.05M HNO₃ and NaOH at constant ionic strength. The sorption of strontium from 0.05M NaNO₃ solution was measured as a function of pH. Abrupt increase in sorption was observed at the equilibrium pH of 9. The experimental titration and strontium sorption data on HZO were evaluated using the constant capacitance model (CCM) and diffuse double layer model (DLM). Various model parameters of Surface Complexation Models (SCM) were estimated, numerically, by non-linear regression. Modeling the sorption and speciation of Sr²⁺ on HZO indicated that the hydrolysis of Sr²⁺ to lower charged SrOH⁺ is the pre-requisite for the abrupt sorption behavior at pH 9.     

Study of sorption processes of strontium on the synthetic hydroxyapatite

The sorption of strontium on synthetic hydroxyapatite was investigated using batch method and radiotracer technique. The hydroxyapatite samples were prepared by a wet precipitation process followed by calcination of calcium phosphate that precipitated from aqueous solution. Also, commercial hydroxyapatites were used. The sorption of strontium on hydroxyapatite depended on the method of preparation and it was pH independent ranging from 4 to 9 as a result of buffering properties of hydroxyapatite. The distribution coefficient K _d was significantly decreased with increasing concentration of Sr²⁺ and Ca²⁺ ions in solution with concentration above 1 × 10⁻³ mol dm⁻³. The percentage strontium sorption for commercial and by wet method prepared hydroxyapatite was in the range of 83–96%, while calcined hydroxyapatite was ranging from 10 to 30%. The experimental data for sorption of strontium have been interpreted in the term of Langmuir isotherm. The sorption of Sr²⁺ ions was performed by ion-exchange with Ca²⁺ cations on the crystal surface of hydroxyapatite. Although calcined hydroxyapatite is successfully used as biomaterial for hard tissues repair, it is not used for the treatment of liquid wastes.     

Sorption of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> by ion exchanger based on titanium phosphate

Sorption capacity of a composite ion exchanger based on titanium phosphate for Cs⁺ and Sr²⁺ cations was studied. The effect of pH and concentration of salts and, in particular, sodium chloride in solution on the sorption efficiency and distribution coefficient was analyzed. The diffusion coefficients were calculated for the Cs⁺ and Sr²⁺ cations and the time of half-exchange of the Na⁺ cation for the Cs⁺ and Sr²⁺ cations was found.     

Effect of fulvic acid and ionic strength on the sorption of radiostrontium on Chinese calcareous soil and its solid components

Summary The sorption and desorption of radionuclide ⁹⁰Sr²⁺were investigated on untreated calcareous soil and two treated soils to remove organic matter and calcium carbonate using batch technique. The experiments were carried out at ambient condition, pH 7.8±0.1 and in the presence of 0.001M NaCl. Effects of fulvic acid and ionic strength on the sorption of ⁹⁰Sr²⁺on calcareous soil were also studied. It was found that the sorption isotherms are linear in the strontium concentration range used herein, and the sorption of ⁹⁰Sr²⁺on the calcareous soil can be described as a reversible sorption process and the sorption mechanism is mainly ion-exchange. The sorption is dependent on ionic strength, and fulvic acid enhances the sorption of ⁹⁰Sr²⁺on calcareous soil. Organic matter present in the calcareous soil is a significant trap of ⁹⁰Sr²⁺and is responsible for the sorption.     

Isotherm of strontium and sodium cation exchange on iron-manganese nodules

The isotherm of ion exchange of Sr²⁺ and Na⁺ ions on iron-manganese nodules was obtained. It was suggested to describe the ion exchange by an equation analogous to the Langmuir isotherm equation. The limiting sorption and apparent ion exchange constant were calculated. The effective radius of sorbed strontium ions was determined.     

Adsorption behaviors of strontium using macroporous silica based hexagonal tungsten oxide

A novel macroporous silica-based hexagonal tungsten oxide (h-WO₃/SiO₂) with exchangeable sodium cations located in hexagonal tunnel structure was synthesized by a facile hydrothermal treatment of sodium tungstate dihydrate with 1 mol/L HCl solution. Utilization of the h-WO₃/SiO₂ adsorbent to remove aqueous strontium was investigated under the condition of various pH values, contact time, the initial concentration of metal ions, salt ion concentration, and coexisting ions. According to the experimental data, Sr²⁺ adsorption equilibrium was achieved within 15 min in acidic solution, and the maximum removal capacity of Sr²⁺ occurred at pH 4. The kinetic adsorption of Sr²⁺ on h-WO₃/SiO₂ was controlled by pseudo second-order model, and the saturated adsorption of Sr²⁺ on h-WO₃/SiO₂ was better described by Langmuir and Redlich-Peterson isotherm models compared with the Freundlich isotherm model. The distribution coefficient of Sr²⁺ was more than 2000 cm³/g in the presence of Ca²⁺, Mg²⁺, La³⁺, and Eu³⁺, indicating that the h-WO₃/SiO₂ showed excellent selectivity towards Sr²⁺ in pH 4.     

Transport and retention of strontium in surface-modified quartz sand with different wettability

Instead of radioactive ⁹⁰Sr, common strontium chloride was used to simulate the migration of radioactive strontium chloride in surface hydroxylated, silanized, and common quartz sand. The sorption and retardation characteristics of strontium (Sr²⁺) in these surface modified quartz sands were studied by batch tests and column experiments. The equilibrium sorption data for Sr²⁺ on different wettability sands were described by the Langmuir and Freundlich isotherm models, and the Langmuir model has been found to provide better correlation for hydrophilic sand. The breakthrough curves (BTCs) of Sr²⁺ in these media were analyzed with the equilibrium convection–dispersion equation (CDE) and a non-equilibrium two-region mobile–immobile model (TRM) using a nonlinear least square curve-fitting program CXTFIT. The TRM model showed better fit to the measured BTCs of Sr²⁺, and the parameters of the fraction of mobile water indicated that significant preferential flow effected the non-equilibrium transport of Sr²⁺. Although TRM model could not fit the Sr²⁺ BTCs very well, the parameter estimated by TRM model may be more reliable than those obtained from batch experiments because the transport of Sr²⁺ in these kind of sand is non-equilibrium processes.     

Effect of fulvic acid on the sorption and desorption of 90Sr2+ on red earth

Summary Sorption and desorption of radiostrontium on the red earth and its solid components in the presence and absence of fulvic acid were investigated by a batch technique under ambient conditions at pH 5.3±0.1 and T = 25±2 °C. The organic matter in the red earth is a significant trap of ⁹⁰Sr²⁺ and the presence of fulvic acid enhances the sorption of ⁹⁰Sr²⁺ on the red earth at pH 5.3. It was found that all the sorption and desorption isotherms are linear and the sorption of ⁹⁰Sr²⁺ on the red earth can be described by a reversible sorption process and the sorption mechanism is mainly ion-exchange. The effect of ionic strength on ⁹⁰Sr²⁺ sorption was also investigated.     

Diffusion of 137Cs in compacted bentonite: Effect of pH and concentration

The effect of pH and concentration on the diffusion of ¹³⁷Cs in the compacted bentonite is studied with capillary method at the ionic strength of 0.1M NaClO₄. The apparent diffusion coefficient increases with increasing concentrations if the sorption of radionuclides is largely dependent on the radionuclide concentrations. The apparent diffusion coefficient decreases with increasing pH because most of the radionuclide sorption on the bentonite increases with increasing pH. The interlaminary space contributes significantly to the radionuclide diffusion and sorption in compacted bentonite. The relationship of the apparent diffusion coefficient and the effective diffusion coefficient of ¹³⁷Cs is also discussed.     

Adsorption of strontium from aqueous solution using activated carbon produced from textile sewage sludges

Different types of activated carbons were prepared by changing the activation temperatures (400–700 °C) and impregnation ratio (sewage sludge: KOH; 1:1, 1:2) and the removal of Sr⁺² from aqueous solution was determined. The maximum adsorption yield (12.11 mg/g) was obtained at 500 °C for 1 h carbonization conditions with impregnation ratio of 1:1. The affecting parameters were analyzed by using central composite design method. The selected parameters were initial pH, temperature, initial strontium concentration and carbon dosage. The analysis of variance was performed in 95% confidence level and checked to fitting of experimental value and predicted value. The significant F was P < 0.05 with a model F value of 19.94 which revealed that this regression is statistically significant. The results of regression analysis indicated that pH and temperature parameters were not individually statistically significant for Sr⁺²sorption. However, the efficiency of strontium sorption increases with the increase in carbon dosage and decreases with the Sr⁺² concentration. Influences of initial pH and temperature, pH and Sr⁺² concentration, temperature and carbon dosage and Sr⁺² concentration and carbon dosage on the adsorption process were considered statistically significant. Adsorption of strontium was described by Freundlich isotherm as a physical adsorption (E = 7.2 kJ/mol). The adsorption reactions were calculated as endothermic, spontaneous and favorable reactions.     

Zur Abtrennung des Spaltstrontiums aus Kernbrennstoffen an Ammoniummolybdatophosphat

The separation of fission strontium from solutions of prolonged cooled nuclear fuel has been performed using ammoniummolybdatophosphate (AMP) columns. The sorption mechanism of bivalent ions on AMP has been investigated by column and batch experiments. A pure ion exchange of Sr²⁺ for two H⁺ or NH ₄ ⁺ ions has been established. Conditions for the sorption and elution of fission strontium and other fission products on AMP columns are described.     

Separation of strontium from simulated waste in K2SO4/Nitrate medium containing Sr2+, Eu3+, Ce3+, Pd2+, Rh3+, Ru3+, UO 2 2+ , Fe3+, Cr3+, Ni2+, Al3+, Ca2+ and Cs+, by strongly basic anion exchanger

In this work Strontium was separated selectively form, Pd²⁺, Ni²⁺ and Ca³⁺ using anionic resins of Amberlite type IRA-900 and IRA-410 from nitrate medium. The Separation of strontium by strongly basic anion exchangers IRA-410 and IRA-900 from simulated waste containing, Sr²⁺, Eu³⁺, Ce³⁺, Pd²⁺, Rh³⁺, Ru³⁺, VO₂ ²⁺, Fe³⁺, Cr³⁺, Ni²⁺, Al³⁺, Ca²⁺, and Cs⁺, in K₂SO₄/nitrate medium which adsorbed as strontium sulphate complex was achieved through ligand- ligan exchange. The elution of strontium carried out via “loading” the column with a solution of 0.03N EDTA in presence of 0.1N NaNO₃ at pH7 where Sr²⁺ has low K_d value. An inductively Coubled Plasma — Optical Emission Spectrometry (ICP — OES) of ARL type model 3520, was used for elemental analysis.     

Distribution of strontium in milk component

The distribution of strontium between the milk components, i.e., serum, casein micelles, whey and hydroxyapatite was determined. The sorption on hydroxyapatite was investigated using batch method and radiotracer technique. The aqueous phase comprised of either milk or whey. The sorption of strontium on hydroxyapatite depended on the method of its preparation and on the composition of the aqueous phase. The sorption of strontium was increased with an increase of pH. The presence of citrate species resulted in decrease of the sorption of strontium on hydroxyapatite. The sorption of ⁸⁵Sr on hydroxyapatite decreased with the increasing concentration of Ca²⁺ ions. Addition of Ca²⁺ ions to milk resulted in milk pH decrease. The decrease in pH value after calcium addition to milk is related to exchanges between added calcium and micellar H⁺. The average value of strontium sorption on casein micelles in milk with presence of hydroxyapatite was (47.3 ± 5.6) %. The average value of sorption of ⁸⁵Sr on casein micelles in milk without the addition of hydroxyapatite was (68.9 ± 2.2) %.     

Extraction behavior of strontium from nitric acid solution with N,N,N′,N′-Tetraisobutyl diglycolamide

The extraction behaviors of strontium from nitric acid solution were investigated with N,N,N′,N′-tetraisobutyl diglycolamide (TiBDGA). Effects of acidity, diluents, concentration of extractant and temperature on the distribution ratio of strontium (D _Sr) were examined. The stoichiometry of the extracted molecule was Sr²⁺:TiBDGA of 1:3. The apparent extraction equilibrium concentration constant logK _ex was 3.25. The enthalpy change ΔH and entropy change ΔS were ?55.6 kJ mol^-1 and ?124 J mol^-1 K^-1, respectively. The extraction is an exothermic process. Through two strip stages, strontium could be stripped effectively by 0.01 M nitric acid solution.     

Sorption of strontium on Slovak bentonites

Sorption of Sr on five Slovak bentonites of deposits has been studied with the use of batch technique. In the experiments there have been used natural, chemically modified and irradiated samples, in three different kinds of grain size. The pH influence on sorption of strontium on bentonites, pH change after sorption and influence of competitive ions have been studied. Distribution ratios have been determined for bentonite–strontium solution system as a function of contact time, pH and sorbate concentration. The data have been interpreted in term of Langmuir isotherm. The uptake of Sr has been rapid and the sorption of strontium has increased by increasing pH. The percentage sorption has decreased with increasing metal concentrations. The pH value after sorption for the natrificated forms of bentonite starts already in the alkaline area and moves to the higher values. For the natural bentonites the values occur in the neutral or in the acidic area. Sorption of Sr has been suppressed by presence of competitive cations as follows: Ba²⁺ > Ca²⁺ > Mg²⁺ > NH₄ ⁺ > K⁺ > Na⁺. By sorption on natrificated samples colloidal particles and pH value increase have been formed. The bentonite exposure as a result of interaction of γ-rays has led to expansion of the specific surface, increasing of the sorption capacity and to the change in the solubility of the clay materials.     

Preparation of TiO<Subscript>2</Subscript> nanoparticles by sonochemical method,isotherm, thermodynamic and kinetic studies on the sorption of strontium

The objective of this study is to evaluate the use of titanium dioxide nanoparticles which were prepared by novel sonochemical method as an ion exchange material for the removal of Sr from aqueous solution. The pH effect on the Sr²⁺ sorption was investigated. The data obtained have been correlated with Freundlich, Temkin and Dubinin–Radushkevich (D–R) isotherm models. Thermodynamic parameters fort he sorption system have been determined at four temperatures. Simple kinetic models have been applied to the rate and isotherm sorption data and the relevant kinetic parameters were determined from the graphical presentation of these models at 298°K. Results explained that the pseudo second-order sorption mechanism is predominant and the overall rate constant of sorption process appears to be controlled by chemical sorption process. The value of sorption energy E = 13 kJ/mol at 298°K and the value of Gibbs free energy ∆G° = 3,222 kJ/mol at 298°K prove that the sorption of strontium on titanium dioxide nanoparticles is an endothermic and non-spontaneous process.     

Factors affecting the sorption behavior of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> using biosorbent material

In this study, saw dust has been used as precursor for production of low cost activated carbon using potassium hydroxide (KOH) and steam activation technique. The activated carbon was used to remove Cs⁺ and Sr²⁺ ions from aqueous solutions by batch operation, and the extent of adsorption was investigated as a function of solution pH, temperature, shaking time, and initial concentration. The influence of interfering ions was also investigated. The removal of metal ions was pH dependent and the adsorption capacity reaches its maximum 43% and 61.5% at pH 5.0 and 6.0 for Cs⁺ and Sr²⁺ ions, respectively. Thermodynamic studies showed different behaviours where an endothermic, non-spontaneous process was shown for Cs⁺ while an exothermic, spontaneous process was obtained for Sr²⁺. The kinetic data of both ions was described well by pseudo-second order rate equation. The two equilibrium models (Langmuir and Freundlich) have been also applied. Desorption studies indicated that HCl was the most effective desorbing eluent. The investigated adsorbent showed good results towards cesium and strontium removal from aqueous media that could be a promising method due to its low-cost and good efficiency.     

Thorium removal from aqueous solutions of Mexican erionite and X zeolite

Thorium(IV) removal from aqueous solutions by erionite and X zeolite was investigated. The Th(IV) uptake at different thorium nitrate concentrations (from 0.25 to 25 mM) was evaluated. The thorium content in the aqueous solution was determined by neutron activation analysis. Th(IV) retained by zeolites was 1.7 and 3.7 meq/g for erionite and X zeolite. In order to explain the thorium sorption process in both zeolites, ion exchange mechanism was considered. It was found that thorium sorption behavior is strongly dependent of the type of zeolite, the separation factor for Mexican erionite was α^Th(IV) _Na(I)<1, this zeolite shows preference for Na(I) rather than for Th(IV), however, by X zeolite, α^Th(IV) _Na(I)~1, this value suggested an approximately ideal ion exchange behavior. The effect of pH on thorium sorption was also considered. This revised version was published online in August 2006 with corrections to the Cover Date.     

Study of Sorption of 2,4‐D on Outer Peristaltic Part of Waste Tire Rubber Granules

From this study it was evident that outer peristaltic parts of waste tire granules gave the highest removal. Film and pore diffusions are the major factors controlling rates of sorption from solution by porous adsorbents. For sorption of 2,4‐D on waste tire rubber granules, the sorption rate coefficient of second‐order kinetic equation was utilized indirectly to determine the rate‐limiting step. The diffusion coefficient lies in the scale of 10^?8 cm²/s, and the pore diffusion coefficient is in the range of 10^?9–10^?10 cm²/s. So both film and pore diffusion are rate limiting. Considering external mass transfer from fluid to particle, using the effect of initial concentration, and using the effect of adsorbent size, no conclusion was reached regarding rate‐controlling steps. It is apparent from the study that external mass transfer (film diffusion) as well as intra‐particle diffusion (pore diffusion) play significant roles in the sorption process for 2,4‐D removal from water onto rubber granules.