Mixed Ligand Complexes of Vanadium(V): Extraction With Some New Hydroxamic Acids and Application in Steel.,Rock and Environmental Anaysis

Abstract

Five new substitued hydroxamic acids are used for extraction and spectrophotometric determination of vanadium(V) in trace amounts. the binary complex of vanadium (V) with H-p-ciloropheny 1-3,4,5-trimethoxycinnamohdroxamic acid (PTCHA) and the mixed ligand complex of vanadium (V) with N-p-cinlorpheny-p-chlorophenoxyisobutyrohydroxamic acid (PP3HA) and thiocyanete were studied. The molar absorbtivities of the bluish violet vanadium(V) hydroxamate and mixed ligand complexes are 6.9 × 10³ and 1.1 × 10⁴ cm³ mol^?3 cm^?1, respectively. The vanadium is also determined with AAs and the method is applied for its determination in steel. alloy, rock and environmental samples.     

Simultaneous determination of iron(III) and vanadium(V) with N-phenylcinnamohydroxamic acid and thiocyanate by extraction-spectrophotometry

N-Phenylcinnarnohydroxamic acid (PCHA) reacts with iron(III) and vanadium(V) in the presence of thiocyanate to form water-insoluble orange and green complexes, respectively. The iron(III)-PCHA and vanadium(V)-PCHA-thiocyanate complexes can be quantitatively extracted into toluene and other common organic solvents at pH 1.5–2.0. The absorption spectra and composition of both complexes are described. The effects of foreign ions and of experimental variables on the extraction and determination of the two metal ions are studied. A simple, selective method is described for the simultaneous determination of iron(III) and vanadium(V) by extraction-spectrophotometry; absorbances are measured at 440 and 580 nm. Mixtures can be determined over the range 10^?4–10^?5 M in each metal. The method was applied successfully to the analysis of standard steels for iron and vanadium.     

Radiation effects on the extraction of americium(III) with di(2-ethylhexyl) phosphoric acid

Radiation effects on the extraction of Am(III) with di (2-ethylhexyl) phosphoric acid (DEHPA) was studied by exposing DEHPA to gamma rays under various conditions. Gamma irradiation of undiluted DEHPA causes an enhancement of extraction of Am(III) due to the formation of mono (2-ethylhexyl) phosphoric acid (MEHPA) similarly to that of Nd(III). The presence of diluent during irradiation brought about a slight difference from the results in the absence of a diluent. The marked change occurred in Df when the organic solvent was exposed to γ-ray while being mixed with nitric acid solution. An initial slight increase of Df for Am(III) and Nd(III) was followed by a subsequent decrease beyond an absorbed dose of approximately 200 Wh·1⁻¹. This phenomenon was explained by the enhanced decomposition of DEHPA and the subsequent strong hydrolytic and radiolytic decomposition of MEHPA to H₃PO₄ in the aqueous phase, and the complex forming nature of H₃PO₄ with Am(III) and Nd(III).     

Extraction recovery of vanadium(V) from sulfuric acid solutions

The IR and electronic absorption spectra of di-2-ethylhexyl hydrogen phosphate (HDEHP) extracts of vanadium(V) and sulfuric acid and of vanadium(V) solutions in sulfuric acid were studied. The composition of the extractable complex was determined, and the equation of vanadium(V) extraction with HDEHP was suggested. The equilibrium constant of vanadium(V) extraction from concentrated sulfuric acid solutions was found.     

Synergistic extraction of americium with MEHPA-DEHPA mixed solvent from nitric acid solution

The synergistic effect of the MEHPA-DEHPA mixed system was examined for the extraction of Am(III) from nitric acid solution. Addition of DEHPA or 2-ethylhexanol in MEHPA results in a deleterious effect at MEHPA concentrations lower than 2·10⁻²M but an enhancing effect at higher concentrations. At DEHPA to MEHPA mole ratios of 2 to 4 in moles, the mixed solvent shows a Df for Am which is 1000 times higher than that of DEHPA.     

Effects of operating variables on the extraction of uranium from phosphoric acid by factorial design

Extraction of uranium from aqueous phosphoric acid by DEHPA/TOPO is carried out commercially and in pilot plants. The operating variables followed are temperature, concentration of phosphoric acid, and the ratio of DEHPA/TOPO. This study investigates the influence of these operating variables by the statistical method of 2³ Factorial Design on extraction of uranium from phosphoric acid. The mathematical model suggested (K=242.31–7.34C–4.784T+0.164C.T) predicts the effect of variables on the distribution ratio (extraction coefficient). The model is tested by a significance test and represented graphically.     

Speciation of vanadium in soil

A method for speciation of vanadium in soil is presented in this work. The sequential extraction analysis procedure of Tessier et al. for heavy metals was used for the vanadium separation. The method consists of sequential leaching of the soil samples to separate five fractions of metals: (1) exchangeable, (2) bound to carbonates, (3) bound to Fe-Mn oxides, (4) bound to organic matter and (5) residual. The leaching solutions of Tessier were used for the vanadium extraction, only for the residual fraction the HClO₄ was replaced with H₂SO₄. The optimum conditions for leaching of vanadium from soil (weight of sample, concentration and volume of extractants, time of extraction) were chosen for each fraction. A sensitive, spectrophotometric method based on the ternary complex V(IV) with Chrome Azurol S and benzyldodecyldimethylammonium bromide (ε=7.1×10⁴ l mol⁻¹ cm⁻¹) was applied for the vanadium determination after separation of V(V) by solvent extraction using mesityl oxide and reduction of V(V) using ascorbic acid. This method was applied for vanadium speciation in soil from two different regions of Poland: Upper Silesia (industrial region) and Podlasie (agricultural region). The content of vanadium in the fractions of Upper Silesia soil was respectively (in 10⁻³%): I, 3.39; III, 4.53; IV, 10.70; V, 8.70 and it was the highest in the organic fraction, indicating input by anthropogenic activities. The content of vanadium in Podlasie soil was clearly lower and it was (in 10⁻³%): I, 2.07; III, 0.92; IV, 0.69; V, 1.23. The concentration of vanadium in fraction 2 of both soils was less than detection limit of applied method. The total content of vanadium in the five soil fractions was in good correlation with the total content of this element in both soils found after HF-H₂SO₄ digestion. Analysis using the ICP-AES method gave comparable results.     

Extraction of lutetium(III) from aqueous solutions by employing a single fibre‐supported liquid membrane

Transport behaviour of Lu(III) across a polypropylene hollow fibre‐supported liquid membrane containing di(2‐ethylhexyl)phosphoric acid (DEHPA) in dihexyl ether as a carrier has been studied. The donor phase was LuCl₃ in the buffer solution consisting of 0.2 M sodium acetate at pH 2.5–5.0. A miniaturised system with a single hollow fibre has been operated in a batch mode. The concentration of Lu(III) was determined by indirect voltammetric method using Zn–EDTA complex. The effect of pH and volume of the donor phase, DEHPA concentration in the organic (liquid membrane) phase, the time of extraction and the content of the acceptor phase on the Lu(III) extraction and stripping behaviour was investigated. The results were discussed in terms of the pertraction and removal efficiency, the memory effect and the mean flux of Lu(III). The optimal conditions for the removal of ¹⁷⁷Lu(III) from labelled ¹⁷⁷Lu‐radiopharmaceuticals were discussed and identified. The removal efficiency of Lu(III) greater than 99% was achieved at pH of the donor phase between 3.5 and 5.0 using DEHPA concentration in the organic phase of 0.47 M and the ratio of the donor to the acceptor phase of 182.     

Extraction of vanadium(V) by N′,N′-dialkylhydrazides of carboxylic acids from acidic solutions

Extraction of vanadium(V) with solutions of 2-ethylhexanoic acid N′,N′-dialkylhydrazides in kerosene from acidic media was studied. The optimal extraction conditions were determined depending on the concentrations of H₂SO₂, HCl, and the extraction agent; the composition of the recovered complexes was proposed. The conditions for back-extraction of vanadium(V) from the organic phase were studied. It was found that benzoic acid N′,N′-diheptylhydrazide did not recover vanadium(V) from acidic media.     

Extraction of vanadium(V) from acid solutions with octyl alcohol isomers

Vanadium(V) extraction with octyl alcohol isomers from acid solutions was studied. Two areas are determined, wherein the vanadium(V) extraction in relation to acidity of the aqueous phase is maximal. The opposite effects of temperature on the extraction are found. The mechanism of the vanadium(V) extraction with high molecular weight alcohols from weakly acid solutions was suggested.     

Trace Analysis of Vanadium in Environment as its Ternary Complex with N-p Methoxyphenyl-2-Furylacrylohydroxamic Acid and 3-(o-Carboxyphenyl)-1-Phenyltriazine-N-Oxide

Abstract

A method is presented for the highly sensitive, selective, and rapid determination of vanadium (V) at sub-microgram levels in rocks, animal tissues, plant tissues and natural waters. The method is based on the selective extraction of vanadium (V) from strongly acidic (3-8 M hydrochloric acid) medium with solution of N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) in chloroform. The reddish-violet extract (molar absorbance 8.6x10³ 1 mole^?1 cm^?1 at λ max 545 nm) is then equilibrated with 3-(o-carboxyphenyl)-1-phenyltriazine-N-oxide (CPPTNO) at pH = 1.5. The resulting ternary complex has enhanced colour (molar absorbance 1.4 × 10⁴ 1 mole^?1 cm^?1 at Λ max 450 nm). The ternary system obeys Beer's Law at 450 nm over the range 0-18 μ g/ml of vanadium. The extraction system achieves 20-fold enrichment of vanadium and enables the determination of the metal down to parts per billion (ng 1^?1) levels. The method tolerates the presence of a large number of anions and cations which are normally present with vanadium in rocks, plant tissues, animal tissues and natural waters. The applicability of the method was tested by the analysis of vanadium in these matrices. MFHA was selected from nine hydroxamic acids as it provided maximum sensitivity and selectivity.     

Extraction equilibria and spectrophotometric determination of vanadium(V) with 4-nitrocatechol and the ion-pair reagent thiazolyl blue tetrazolium

The formation and liquid-liquid extraction of a yellow ternary complex of vanadium(V) with 4-nitrocatechol (NC) and the ion-pair reagent Thiazolyl Blue Tetrazolium ⨑ub;3-(4,5-dimethyl-2-thiazol)-2,5diphenyltetrazolium bromide, MTT⫂ub; with 1: 2: 3 stoichiometry (V: NC: MTT) was studied. The optimum extraction conditions (pH, concentration of the reagents, extraction time), spectrophotometric parameters of the extract and key constants (extraction constant, association constant, distribution constant) were determined. Beer’s law was obeyed for concentrations ranging from 0.12 to 1.2 μg/mL of vanadium(V) with a molar absorptivity of ɛ = 3.13 × 10⁴ L/mol cm at λ_max = 400 nm. The effect of diverse ions was studied and extraction-spectrophotometric procedures for determination of vanadium in catalysts and steels were proposed.     

Sensitive spectrophotometric determination of vanadium with 2-(5-bromo-2-pyridylazo)-5-diethyl-aminophenol (5-Br-PADAP)

A new sensitive and highly selective method is described for the spectrophotometric determination of microgram amounts of vanadium(V). First, vanadium is isolated by extraction withN-benzoyl-N-phenylhydroxylamine (BPHA) in chloroform from about 4M hydrochloric acid medium. Then, chloroform is evaporated and the residue mineralized with mixture of cone. perchloric and nitric acid. Finally, a colour reaction of vanadium(V) separated with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in an acetate buffer (pH 4.5) gives a molar absorptivity of 5.48×10⁴l·mol^–1·cm^–1 at 585 nm. The proposed method was applied for the determination of traces of vanadium in aluminium samples. The results obtained show a good precision and accuracy of the method.     

Flow-injection spectrophotometry of vanadium by catalysis of the bromate oxidation of N,N'-bis(2-hydroxyl-3-sulfopropyl)-tolidine

A highly sensitive flow-injection method is proposed for the catalytic determination of vanadium(V) at sub-nanogram per milliliter levels using a new indicator reaction. The method is based on the catalytic effect of vanadium(V) on the bromate oxidation of N,N′-bis(2-hydroxyl-3-sulfopropyl)-tolidine. 1,2-Dihydroxybenzene-3,5-disulfonate was used as an activator in the vanadium(V)-catalyzed reaction and significantly enhanced the sensitivity of the method. Vanadium(V) in the range 0.01-3.0 ng ml⁻¹ was easily determined with sampling rate of about 30 h⁻¹. Vanadium(IV) could be also determined. The limit of detection (S/N=3) was 0.008 ng ml⁻¹ and the relative standard deviations were 1.4 and 1.6% for ten determinations of 0.2 ng ml⁻¹ vanadium(IV) and vanadium(V), respectively. Interferences from metal ions could be suppressed by the addition of ethylenediamine-N,N,N′,N′-tetrakis(methylenephosphonic acid) as a masking agent. The proposed method was successfully applied to the determination of vanadium in water samples.     

Preparation of sol–gel materials doped with ionic liquid and extractant for cerium(III) extraction

Silica materials (ILDEHPASGs) consisting of ionic liquids and di-(2-ethylhexyl)phosphoric acid (DEHPA) for Ce(III) extraction was prepared by a sol–gel method using the hydrophobic ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate ([C₈mim]PF₆) as porogen and solvent medium. The ILDEHPASGs were characterized by scanning electron microscopy, Brunauer–Emmett–Teller surface area, Fourier transform infrared, and thermogravimetric analyses. The results indicated the doping of DEHPA and [C₈mim]PF₆ in ILDEHPASG-3 would evidently affect the formation of porous structure of sol–gel materials. ILDEHPASG-3 also possessed more channels and macropores than the blank sorbent; the surface area and pore volume of ILDEHPASG-3 were 409 m² g^?1 and 0.444 cm³ g^?1, respectively. [C₈mim]PF₆ and DEHPA were only physically confined or entrapped in the growing covalent silica network rather than chemically bound to the inorganic matrix. The majority of [C₈mim]PF₆ and DEHPA were stably immobilized in the gel. Then, the effects of contact time and pH were determined. The results showed the sorption of Ce(III) strongly depended on the contact time and pH, and ILDEHPASGs had high sorption ability for Ce(III). The results were analyzed by both Langmuir and Freundlich adsorption isotherm models, and the latter was found to give a better fit.     

Extraction-photometric determination of vanadium(V) with N-hydroxy-N-m-tolyl-N′-(2-methyl-5-chloro)phenyl-p-toluamidine hydrochloride in the presence of acetic,monochloroacetic, and phenylacetic acids

N-Hydroxy-N-m-tolyl-N′-(2-methyl-5-chloro)phenyl-p-toluamidine hydrochloride (HTMCPTH), a monobasic and bidentate chelating agent which reacts with vanadium(V) in carboxylic acid media to develop a blue-violet complex, has been employed as a highly selective reagent for extraction and direct photometric determination of the metal. Solvent extraction experiments indicate that from aqueous acetic acid (1.0–10.0 M), monochloroacetic acid (0.1–10.0 M), and phenylacetic acid (at pH 0.5–6.0) vanadium(V) is quantitatively extracted into chloroform. Almost all common ions including Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Mn²⁺, Cr³⁺, Ti⁴⁺, Zr⁴⁺, and Mo⁶⁺ do not interfere with the proposed method. The procedure has been utilized for accurate determination of vanadium in standard steels.     

Effect of oxidation-reduction on the extraction of uranium from wet phosphoric acid by DEHPA/TOPO

Uranium is recovered from wet phosphoric acid by DEHPA/TOPO in kerosene. Uranium is present in wet phosphoric acid in the tetravalent and hexavalent states but DEHPA/TOPO extracts uranium in the hexavalent state only. The ratio of U⁴⁺/U⁶⁺ depends on several factors such as the origin of the phosphate rock, the method of preparation of phosphoric acid and the presence of other impurities. Therefore it is important to oxidize the wet acid to convert all uranium to U⁶⁺ before extraction. Uranium is stripped from the solvent by a reverse process where a concentrated phosphoric acid is used under reducing conditions. This paper studies the oxidation of wet phosphoric acid from Homs plant/Syria by H₂O₂ oxidant and the effect of oxidation on extraction coefficientK. It also studies the reduction by iron and its effect on back extraction of uranium from the solvent to phosphoric acid.     

Hollow-fibre liquid phase microextraction for separation and preconcentration of vanadium species in natural waters and their determination by electrothermal vaporization-ICP-OES

For separation and determination of vanadium(IV/V) species, a fast and sensitive method by combining hollow-fibre liquid phase microextraction (HF-LPME) with electrothermal vaporization (ETV)-ICP-OES has been developed. Two vanadium species (V(IV) and V(V)) were separated by HF-LPME with the use of ammonium pyrrolidinecarbodithioate (APDC) as chelating agent for complexing with different V species and carbon tetrachloride as the extraction solvent, and the vanadium in the post-extraction organic phase was injected into the graphite furnace for ETV-ICP-OES detection, in which APDC was acted as the chemical modifier. At pH 5.0, both V(IV)-APDC and V(V)-APDC were extracted quantitatively into CCl₄ for determination of total V. For speciation studies, 1,2-cyclohexanediaminetetraacetic acid (CDTA) was added to the sample for masking V(IV), so that only V(V)-APDC was extracted and determined. The concentration of V(IV) was calculated by subtracting the V(V) concentration from the total concentration of V. Under the optimized experimental conditions, the enrichment factor was 74 and the detection limits for V(IV) and V(V) were 86 pg mL⁻¹ and 71 pg mL⁻¹, respectively. The proposed method has been applied to the speciation of V in environmental water samples, and the recovery was in the range of 94%-107%. The results show that V(V) is the dominant existence form in oxygenic water and V(IV) could not been detected. In order to validate the developed procedure, a NIES No.8 vehicle exhaust particulates certified reference material was analyzed, and the results obtained for total vanadium are in good agreement with the certified values. The proposed method is simple, rapid, selective, and sensitive and no oxidation/reduction is required, it is applicable to the speciation of vanadium in environmental samples with the complicated matrix.     

Study of the Ternary Complex Formation Between Vanadium(III)-Picolinic Acid and the Amino Acids: Cysteine,Histidine, Aspartic and Glutamic Acids

The complex species formed between vanadium(III)-picolinic acid (HPic) and the amino acids: cysteine (H₂Cys), histidine (HHis), aspartic acid (H₂Asp) and glutamic acid (H₂Glu) were studied in aqueous solution by means of electromotive forces measurements emf(H) at 25 °C and 3.0 mol⋅dm⁻³ KCl as ionic medium. Data analysis using the least-squares program LETAGROP indicates the formation of ternary complexes, whose stoichiometric coefficients and stability constant were determined. In the vanadium(III)-picolinic acid-cysteine system the model obtained was: [V(Pic)(H₂Cys)]²⁺, [V(Pic)(HCys)]⁺, V(Pic)(Cys) and [V₂O(Pic)(Cys)]⁺. The vanadium(III)-picolinic acid-histidine system contained the following complexes: [V(Pic)(HHis)]²⁺, [V(Pic)(His)]⁺, V(Pic)(His)(OH) and [V(Pic)₂(HHis)]⁺. In the vanadium(III)-picolinic acid-aspartic acid system the model obtained was: V(Pic)(Asp), [V(Pic)(Asp)(OH)]⁻ and [V₂O(Pic)(Asp)]⁺ and finally, in the vanadium(III)-picolinic acid-glutamic acid system the complexes: V₂O(Pic)₂(HGlu)₂, V(Pic)(HGlu)₂ and V(Pic)₂(HGlu) were observed.     

Radiolysis of DEHPA-CCL4 solvent mixture in the presence of aqueous solutions

In order to clarify the effect of carbon tetrachloride on the radiolysis of di(2-ethylhexyl)phosphoric acid(DEHPA), DEHPA diluted with carbon tetrachloride was exposed to⁶⁰Co γ-rays in the presence or absence of aqueous solution and the yields of degradation products of DEHPA and hydrogen chloride were determined. Radiolysis of DEHPA is enhanced by carbon tetrachloride, most intensively in the stirred system of DEHPA−CCl₄ and an aqueous solution. Carbon tetrachloride also corroded stainless steel immersed in it during γ-irradiation owing to the formation of hydrogen chloride. Yield of hydrogen chloride increased in the presence of the aqueous solution, most effectively upon stirring, and corrosion became significant.