Crystal structure and photoluminescence of (Y1−xCex)2Si3O3N4

Oxonitridosilicate phosphors with compositions of (Y_1−xCe_x)₂Si₃O₃N₄ (x=0−0.2) have been synthesized by solid state reaction method. The structures and photoluminescence properties have been investigated. Ce³⁺ ions have substituted for Y³⁺ ions in the lattice. The emission and excitation spectra of these phosphors show the characteristic photoluminescence spectra of Ce³⁺ ions. Based on the analyses of the diffuse reflection spectra and the PL spectra, a systematic energy diagram of Ce³⁺ ion in the forbidden band of sample with x=0.02 is given. The best doping Ce content in these phosphors is ∼2 mol%. The quenching temperature is ∼405 K for the 2 mol% Ce content sample. The luminescence decay properties were investigated. The primary studies indicate that these phosphors are potential candidates for application in three-phosphor-converted white LEDs.     

Enhanced hydrogen production by doping Pr into Ce0.9Hf0.1O2 for thermochemical two-step water-splitting cycle

We synthesized (Ce_0.9Hf_0.1)_1−xPr_xO_2−δ (x=0, 0.05 and 0.1) using the polymerized complex method. The synthesized samples, as well as the samples after thermochemical two-step water-splitting cycles have a fluorite structure and Pr exists in the solid solutions with both trivalent and tetravalent states, as suggested by powder X-ray Diffraction (XRD) Patterns. The reduction fraction of Ce⁴⁺ in redox cycles (oxidation step in air) and two-step water-splitting cycles (oxidation step in steam) indicates that the addition of Pr into Ce–Hf oxide solid solution cannot improve the reduction fraction of Ce⁴⁺ during the redox cycles but both the reduction fraction of Ce⁴⁺ and H₂ yield are significantly enhanced during two-step water-splitting cycles. The chemical composition of 10 mol% Pr doped Ce_0.9Hf_0.1O₂ exhibits the highest reactivity for hydrogen production in H₂-generation step by yielding an average amount of 5.72 ml g⁻¹ hydrogen gas, which is much higher than that evolved by Ce_0.9Hf_0.1O₂ (4.50 ml g⁻¹). The enhancement effect of doping Pr on the performance during two-step water-splitting cycles is because of the multivalent properties of Pr, which can: (1) reduce the amount of Ce³⁺ oxidized by contamination air (contamination air eliminated by partial oxidation of Pr³⁺ to Pr⁴⁺) in H₂-generation step; (2) enhance the reaction rate in H₂-generation step by improving the ionic conductivity (extrinsic oxygen vacancies created by the substitution of Ce⁴⁺ by Pr³⁺).     

Effect of interface states associated with transitional nanophase precipitates in the enhancement of red emission from SrAl12O19:Pr by Ti incorporation

SrAl₁₂O₁₉:Pr³⁺, Ti⁴⁺ phosphor suitable for field emission displays is prepared by the wet chemical gel-carbonate method and the mechanism of enhancement in red photoluminescence (PL) intensity with Ti⁴⁺ therein has been investigated. The PL spectra of Pr³⁺ show both ¹D₂-³H₄ and ³P₀-³H₆ emission in the red region with very weak intensity when excited at 355 nm. The emission intensity has increased by about 100 times at room temperature in the compositional range SrAl_12−xTi_xO_19+x/2:Pr³⁺, with 0.1≤x≤0.3 in comparison to Ti-free SrAl₁₂O₁₉:Pr³⁺. TEM investigations show the presence of exsolved nanophase of SrAl₈Ti₃O₁₉, the precipitation of which is preceded by the presence of defect centers at the interfacial regions between the semicoherent transient phase and the parent SrAl₁₂O₁₉ matrix. The presence of transitional nanophase and the associated defects modify the excitation-emission process by way of formation of electronic sub-levels at lower energy (3.5 eV) than the band gap of SrAl₁₂O₁₉ (∼7 eV) followed by non-resonance energy transfer to Pr³⁺ level, leading to magnetic-dipole related red emission with enhanced intensity. The PL intensity of Pr³⁺ decreases at high Ti⁴⁺ concentrations (x>0.3) due to higher extent of segregation of non-emissive SrAl₈Ti₃O₁₉:Pr³⁺ phase.     

Effects of compositional phase transitions on luminescence of Sr1−xCaxTiO3:Pr

The mixed-compound of Sr_1−xCa_xTiO₃ has shown several compositional phase transformations. Photoluminescence and excitation spectra of the samples with different x and doped with 0.2% Pr³⁺ were investigated. Changes in the emission spectra were observed in different phases. The blue emission at 491 nm from ³P₀ state was found quite strong in the tetragonal phase, and was thermally quenched in the orthorhombic phases. The intensity of the red luminescence from ¹D₂ increases with increasing content of calcium. The strongest red emission is obtained from CaTiO₃:Pr³⁺. The results are discussed based on the configuration coordinate model and interaction of Pr with the charge transfer exciton state of the Ti complex.     

VUV spectroscopic properties of Ce and Pr-doped AREP2O7-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu)

Spectroscopic properties of Ce³⁺ and Pr³⁺-doped AREP₂O₇-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu) have been investigated using VUV spectroscopy technique. Ce³⁺-doped samples show typical Ce³⁺ emission in the range of 325-450 nm. The strong host absorption band starting at around 160 nm indicates that the optical band gap of AREP₂O₇ hosts is at least 7.7 eV, and the host→Ce³⁺ energy transfer process is rather efficient. However, AREP₂O₇:Pr³⁺ samples show less efficient host→Pr³⁺ energy transfer. The direct Pr³⁺ 4f²→4f¹5d¹ excitation, which are 12160±640 cm⁻¹ higher respect to that of Ce³⁺, leads to strong 4f¹5d¹→4f² emission bands in the range of 230-325 nm but no obvious 4f²→4f² emission lines.     

Energy transfer in Y3Al5O12:Ce, Pr and CaMoO4:Sm, Eu phosphors

Non-radiative energy transfers (ET) from Ce³⁺ to Pr³⁺ in Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and from Sm³⁺ to Eu³⁺ in CaMoO₄:Sm³⁺, Eu³⁺ are studied based on photoluminescence spectroscopy and fluorescence decay patterns. The result indicates an electric dipole-dipole interaction that governs ET in the LED phosphors. For Ce³⁺ concentration of 0.01 in YAG:Ce³⁺, Pr³⁺, the rate constant and critical distance are evaluated to be 4.5×10⁻³⁶ cm⁶ s⁻¹ and 0.81 nm, respectively. An increase in the red emission line of Pr³⁺ relative to the yellow emission band of Ce³⁺, on increasing Ce³⁺ concentration is observed. This behavior is attributed to the increase of spectral overlap integrals between Ce³⁺ emission and Pr³⁺ excitation due to the fact that the yellow band shifts to the red spectral side with increasing Ce³⁺ concentration. In CaMoO₄:Sm³⁺, Eu³⁺, Sm³⁺-Eu³⁺ transfer occurs from ⁴G_5/2 of Sm³⁺ to ⁵D₀ of Eu³⁺. The rate constant of 8.5×10⁻⁴⁰ cm⁶ s⁻¹ and the critical transfer distance of 0.89 nm are evaluated.     

Chemomechanical properties and microstructural stability of nanocrystalline Pr-doped ceria: An in situ X-ray diffraction investigation

The chemomechanical properties and microstructural stability of nanocrystalline Pr_xCe_1 − xO_2 − δ solid solutions are studied as a function of temperature by in situ X-ray diffraction measurements under oxidizing conditions at P(O₂) ~ 200 mbar. The chemical expansion coefficient of nanocrystalline powder specimens, operative at intermediate temperatures during which Pr⁴⁺ is reduced to Pr³⁺, is found to be similar to that obtained for coarse-grained Pr_xCe_1 − xO_2 − δ. This is contrary to reports regarding variation of physical and chemical properties with crystallite size. The thermal expansion coefficient, measured under conditions for which Pr_xCe_1 − xO_2 − δ is highly oxygen deficient, was found to be greater than that measured for fully oxidized Pr_xCe_1 − xO_2 − δ, with potential sources of these changes discussed. Moreover, the microstructure of nanocrystalline Pr_xCe_1 − xO_2 − δ is observed to have excellent stability at working temperatures below 800 °C, enabled by the inherent microstrain in the structure, highlighting the potential application of this material for solid state electrochemical devices.     

Near infrared fluorescence and energy transfer in Ce/Nd Co-doped CaxSr1−xS

Novel near infrared (NIR) phosphors Ca_xSr_1−xS:Ce³⁺,Nd³⁺ were synthesized by a solid state reaction. The NIR emission was realized through an efficient absorption by the allowed 4f-5d transition of Ce³⁺ and efficient energy transfer to Nd³⁺ via well-matched energy levels. Ce³⁺ and Nd³⁺ content in CaS/SrS was optimized. It was found that CaS:Ce³⁺,Nd³⁺ gave much stronger NIR emission than that of SrS:Ce³⁺,Nd³⁺. Further studies on Ca_xSr_1−xS:Ce³⁺,Nd³⁺ indicated that both visible emission of Ce³⁺ and NIR emission of Nd³⁺ were observably affected by Ca/Sr ratio. The energy transfer efficiency, which can be estimated from fluorescence lifetime of Ce³⁺, increased from 52% to 74% for the Ca_xSr_1−xS:Ce³⁺,Nd³⁺ (x=0 to 1) series, accompanied with a shift of maximal emission wavelength of Ce³⁺ from 482 to 505 nm. The results showed that overlap between emission spectrum of Ce³⁺ and excitation spectrum of Nd³⁺ plays an important role in the energy transfer efficiency, and Ce³⁺ emitting in green or blue-greenish region sensitized the Nd³⁺ NIR fluorescence emission more efficiently than that in blue region.     

Luminescent properties of trivalent praseodymium-doped lanthanum aluminum germanate LaAlGe2O7

The luminescent characteristics of Pr³⁺-activated LaAlGe₂O₇ were investigated. In response to excitement using 448 nm blue light, the emission spectra involved most of the ³P₀→³H_J transitions. The dominant emission came from the ³P₀→³H₄ transition at 487 nm. ¹D₂ fluorescence quenching was observed in highly doped samples and is related to the cross-relaxation processes among neighboring Pr³⁺ ions. In contrast with conventional Pr³⁺-activated phosphors, the extraordinary excitation spectra showed only intense f-f transition of Pr³⁺ ions, while the 4f-5d transition was eliminated. This is ascribed to photoionization. By analyzing absorption and excitation spectra, it is recognized that no efficient energy transfer occurs between Pr³⁺ and the host lattice in LaAlGe₂O₇.     

Enhancement of red spectral emission intensity of Y3Al5O12:Ce phosphor via Pr co-doping and Tb substitution for the application to white LEDs

We have enhanced color-rendering property of a blue light emitting diode (LED) pumped white LED with yellow emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce) phosphor using addition of Pr and Tb as a co-activator and host lattice element, respectively. Pr³⁺ addition to YAG:Ce phosphor resulted in sharp emission peak at about 610 nm through ¹D₂→³H₄ transition. And when Tb³⁺ substituted Y³⁺ sites, Ce³⁺ emission band shifted to a longer wavelength due to larger crystal field splitting. Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and (Y_1−xTb_x)₃Al₅O₁₂:Ce³⁺ phosphors were coated on blue LEDs to fabricate white LEDs, respectively, and their color-rendering indices (CRIs, R_a) were measured. As a consequence of the addition of Pr³⁺ or Tb³⁺, CRI of the white LEDs improved to be R_a=83 and 80, respectively. Especially, blue LED pumped (Y_0.2Tb_0.8)₃Al₅O₁₂:Ce³⁺ white LED showed both strong luminescence and high color-rendering property.     

Ferroelectric properties of Bi3.25−x/3La0.75Ti3−xNbxO12 films prepared by pulsed laser deposition

Bi₄Ti₃O₁₂ (BiT), Bi_3.25La_0.75Ti₃O₁₂ (BLT), Bi_4−x/3Ti_3−xNb_xO₁₂ (BTN) and Bi_3.25−x/3La_0.75Ti_3−xNb_xO₁₂ (BLTN) thin films have been prepared by pulsed laser deposition. BTN and BLTN films exhibit a maximum in the remanent polarization P_r at a Nb content x=0.018. At this Nb content, the BLTN film has a P_r value (25 μC/cm²) that is much higher than that of BiT and a coercive field similar to that of BiT. The polarization of this BLTN film is fatigue-free up to 10⁹ switching cycles. The high fatigue resistance is mainly due to the substitution of Bi³⁺ ions by La³⁺ ions at the A site and the enhanced P_r arises largely from the replacement of Ti⁴⁺ ions by Nb⁵⁺ ions at the B site. The mechanisms behind the effects of the substitution at the two sites are discussed.     

Luminescence of La3F3[Si3O9]:Ce

The luminescence properties of Ce³⁺ in La₃F₃[Si₃O₉] are reported. Excitation and emission bands corresponding to 4f¹→5d¹ transitions of Ce³⁺ were identified. The center of gravity of the 5d states lies at remarkable high energy (43.2×10³ cm⁻¹) for Ce³⁺ in a silicate compound. This high value is attributed to the combined oxygen/fluoride coordination of the Ce³⁺ ion. Emission from the lowest 4f5d level to the ²F_5/2 and ²F_7/2 levels was found at 32.4×10³ and 30.4×10³ cm⁻¹. These results are compared with literature data on silicates and fluorides. From the values found for Ce³⁺, predictions are made for the positions of the 4f5d bands of Pr³⁺ and Er³⁺ in La₃F₃[Si₃O₉]. For both ions, it is concluded that in this host lattice emission is expected from high lying 4fⁿ energy levels.     

The size and strain effects on the Raman spectra of Ce1−xNdxO2−δ (0≤x≤0.25) nanopowders

Ultrafine Ce_1−xNd_xO_2−δ (x=0-0.25) powders were synthesized by self-propagating room temperature synthesis. Raman spectra were measured at room temperature in the 300-700 cm⁻¹ spectral range. The shift and asymmetric broadening of the Raman F_2g mode at about 454 cm⁻¹ in pure and doped ceria samples could be explained with combined size and inhomogenous strain effects. Increased concentration of O²⁻ vacancies with doping is followed by an appearance of new Raman feature at about 545 cm⁻¹.     

Highly active Ce1−xCuxO2 nanocomposite catalysts for the low temperature oxidation of CO

A series of Ce_1−xCu_xO₂ nanocomposite catalysts with various copper contents were synthesized by a simple hydrothermal method at low temperature without any surfactants, using mixed solutions of Cu(II) and Ce(III) nitrates as metal sources. These bimetal oxide nanocomposites were characterized by means of XRD, TEM, HRTEM, EDS, N₂ adsorption, H₂-TPR and XPS. The influence of Cu loading (5-25 mol%) and calcination temperature on the surface area, particle size and catalytic behavior of the nanocomposites have been discussed. The catalytic activity of Ce_1−xCu_xO₂ nanocomposites was investigated using the test of CO oxidation reaction. The optimized performance was achieved for the Ce_0.80Cu_0.20O₂ nanocomposite catalyst, which exhibited superior reaction rate of 11.2 × 10⁻⁴ mmol g⁻¹ s⁻¹ and high turnover frequency of 7.53 × 10⁻² s⁻¹ (1% CO balanced with air at a rate of 40 mL min⁻¹, at 90 °C). No obvious deactivation was observed after six times of catalytic reactions for Ce_0.80Cu_0.20O₂ nanocomposite catalyst.     

Concentration dependence of the Ce3+ and Tb3+ luminescence of Ce1-xTbxMgAl11O19

The quenching of the Ce³⁺ emission and the increase of the Tb³⁺ emission with increasing x of Ce_1-xTb_xMgAl₁₁O₁₉ for x ? 0.35 is ascribed to energy transfer from Ce³⁺ to Tb³⁺, which is restricted to nearest rare earth neighbours. This transfer is almost complete at x ? 0.35. The decrease of the Tb³⁺ emission at higher Tb³⁺ concentrations is not due to Tb³⁺ concentrational quenching, but due to the limited solubility of Tb³⁺ in the CeMgAl₁₁O₁₉ phase.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Chemical pressure effect in CeFeAs1−xPxO0.95F0.05

We investigate the chemical pressure effect due to P doping in the CeFeAs_1−xP_xO_0.95F_0.05(0≤x≤0.4) system. The compound CeFeAsO_0.95F_0.05 without P doping is on the boundary between antiferromagnet (AFM) and superconductor. The AFM order of Ce³⁺ local moments causes a significant reentrance behavior in both resistivity and magnetic susceptibility. Upon P doping, T_c increases and reaches a maximum of 21.3 K at x=0.15, and then it is suppressed to lower temperatures. Meanwhile, the AFM order of Ce³⁺ ions remains nearly the same in the whole doping range (0≤x≤0.4). Our experimental results suggest a competition between superconductivity and Kondo effect in the Ce 1111 system.     

Luminescence enhancement by energy transfer from Ce ions in Ba1.6Ca0.4P2O7:Ce:Tb phosphor

The optical properties of Ba_1.6Ca_0.4P₂O₇ doped with Ce³⁺ and Tb³⁺ are investigated. Under excitation at 280 nm the emission spectrum of Ba_1.6Ca_0.4P₂O₇:Ce³⁺ consists of a peak at 370 nm and a shoulder at the longer wavelength side. The emission spectra of Ba_1.6Ca_0.4P₂O₇:Tb³⁺ shows the well-known emission lines due to ⁵D₄-⁷F_J transitions of Tb³⁺. The green emissions of Tb³⁺ ions are enhanced upon UV excitation through energy transfer from Ce³⁺ to Tb³⁺ ions. The efficiency of such an energy transfer is estimated based on spectroscopic data. The dependence of photoluminescence (PL) intensities of Ce³⁺ and Tb³⁺ emissions on Ce³⁺ or Tb³⁺ concentrations in the systems (Ba_1.6Ca_0.4P₂O₇:0.04Ce³⁺,xTb³⁺ and Ba_1.6Ca_0.4P₂O₇:xCe³⁺,0.04Tb³⁺) and the temperature dependence of PL emission spectra of Ba_1.6Ca_0.4P₂O₇:0.06Ce³⁺,0.04Tb³⁺ is also investigated.     

The structure and luminescence properties of a novel orange emitting phosphor Y3MnxAl5−2xSixO12

A series of phosphors with the composition Y₃Mn_xAl_5−2xSi_xO₁₂ (x=0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4, 0.5, 0.6) was prepared through solid state reactions. X-ray powder diffraction analysis of samples shows that when co-doping content does not exceed 16% of Al³⁺, equimolar co-doping of Mn²⁺ and Si⁴⁺ does not change the garnet structure of phosphors, but makes the interplanar distance to decrease a certain extent. However, if the co-doping content exceeds 16%, new phases will form in the samples. The excitation and emission spectra of samples show that Mn²⁺ in Y₃Mn_xAl_5−2xSi_xO₁₂ emits broadband orange light (peak wavelength varies from 586 to 593 nm). With an increment in co-doping content, the emission intensity of the phosphors increases when the value of x is lower than 0.1 while it decreases when it is higher than 0.1 and the emission peak moves to a longer wavelength.     

Energy transfer and luminescent properties of Ce, Cr co-doped Y3Al5O12

The phosphors in the system Y_3−xAl_5-yO₁₂:xCe³⁺,yCr³⁺ were synthesized by solid-state reactions and their photoluminescence properties were investigated. These phosphors have absorption in the visible light region and give luminescence in the far-red region (∼688 nm), which are suitable for the application in the device of luminescent solar concentrator (LSC). In these phosphors, Ce³⁺ located at Y³⁺ site can effectively transfer its absorbed energy to Cr³⁺ at Al³⁺ site.