Surface-modification of TiO2 with new metalloporphyrins and their photocatalytic activity in the degradation of 4-notrophenol

A new mono-functionalized porphyrin derivative, 5-mono-[4-(2-(4-hydroxy)-phenoxy)ethoxy]-10,15,20-triphenylporphyrin (3) and its Cu(II) (3a), Zn(II) (3b) and Ni(II) (3c) metalloporphyrins were synthesized and characterized by using various spectroscopic techniques. The corresponding 3a, 3b, 3c-TiO₂ photocatalysts were then prepared and characterized by means of FT-IR and diffused reflectance spectra, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic activities of 3a, 3b, 3c-TiO₂ were investigated by testing the photodegradation of 4-nitrophenol (4-NP) in aqueous solution under the halogen lamp irradiation. The results indicated that all the 3a, 3b, 3c enhanced the photocatalytic efficiency of bare TiO₂ in photodegrading the 4-NP, and 3a-TiO₂ exhibited the highest photocatalytic activity. The result is considered a combined action of potential match of 3a with TiO₂ CB and effective impregnated of 3a onto the surface of TiO₂.     

Structure and thermal behaviors of organic crystals based on substituted 1,3,4-thiadiazoles

The crystalline structure of some compounds containing the 1,3,4-thiadiazole moiety, (1) 5-ethyl-2-amino-1,3,4- thiadiazole (EATZ), (2) 5-benzylsulfany-2-amino-1,3,4-thiadiazole (BSATZ) and (3) 2,5-bis-benzylsulfanyl-1,3,4-thiadiazole (BBSTZ) were determined. Both EATZ and BBSTZ show orthorhombic structures with space group Pbca and BSATZ a monoclinic system with space group C2/c. The lattice parameters: a=0.72280 (14), b=1.0811 (2), c=1.6210 (3) nm for 1, a=2.5282 (5), b=0.59083 (12), c=1.5390 (3) nm for 2 and a=0.87530 (18), b=1.0365 (2), c=3.6098 (7) nm for 3. To compare the intra- and intermolecular interactions in thiadiazole containing organic crystals, thermal analysis studies on each crystal is performed using DSC and TG in N₂ atmosphere to describe the thermal behaviors. Based on the results, the changing regularity of melting point and decomposition temperature of these compounds is educed     

The nature of anharmonicity and anomalous piezoelectric properties of ferroelectric SbSBr crystal

The contribution of soft mode at Sb atom's sites, to the temperature dependences of Sb atom's equilibrium position's difference Δz(T) has been studied theoretically, when SbSBr crystal is deformed along a(x), b(y) and c(z)-axis in paraelectric phase and is deformed along c(z)-axis in ferroelectric phase. The largest change of Δz₃₃(T) occurs in the ferroelectric phase near the phase transition temperature in the range from 16 K to 21 K. The temperature dependence of Sb atom's equilibrium position's displacements Δz₃₃ is very similar to the temperature dependence of experimental piezoelectric modulus, when SbSBr crystal is deformed in the direction of c(z)-axis in ferroelectric phase.     

Organic radical molecular solids based on [(TCNQ)n] (n=1 or 2): Syntheses, crystal structures, magnetic properties and DFT analyses

Four molecular solids consisting of the 7,7,8,8-tetracyanoquinodimethane (TCNQ) radical and benzylpyridinium or benzylquinolinium derivatives with molar ratios of 1:1 (1-3) and 2:1 (4) have been prepared and characterized. In the crystals of 1 and 3, TCNQ⁻ monoanions and the corresponding cations form segregated stacks, which are regular in 1 but irregular in 3. Instead of segregated stacks, TCNQ⁻ monoanions in 2 form isolated π-dimers. In the crystals of 4, two crystallographic independent TCNQ species possess almost equal fractional negative charge (ca. −0.5). Two types of TCNQ species form a tetrad, these tetrads make a TCNQ stack with the pattern …BAAB…BAAB… along the crystallographic a-b direction. The magnetisms for 1-4 can be simply explained by the formation of singlet spin state. A broken symmetry approach in a density functional theory framework at the ub3lyp/6-31 g level was used to calculate the magnetic exchange constants in 1-4. The results qualitatively demonstrate the observed magnetic properties.     

The crystal structure and magnetic properties of the 1-dimensional dihalide-bridged polymers dichlorobis(thiazole)cobalt(II) and dibromobis(thiazole)-cobalt(II)

The isostructural polymeric compounds Co(thiazole)₂X₂ (X=Cl (1), Br(2)) have been synthesised by the addition of thiazole to an ethanolic solution of the corresponding anhydrous cobalt halide. Powder X-ray and neutron diffraction measurements were used for structural determination. The structures were determined using powder neutron diffraction data and Rietveld techniques: (1) C2/c, a=17.806(2) Å, b=3.6806(6) Å, c=14.807(3) Å, β=94.78(1)°, V=967.1(3) ų, Z=4; (2) C2/c, a=18.079(3) Å, b=3.8138(8) Å, c=15.022(4) Å, β=92.71(1)°, V=1034.6(4) ų, Z=4. Each linear polymer chain is composed of pseudo-octahedral, high-spin Co²⁺ centres, doubly linked by halide bridges. Magnetisation measurements of 1 and 2 at 5 K between 0 and 10 kG reveals a metamagnetic transition between antiferromagnetic and ferromagnetic states. Low temperature susceptibility data have been fitted to a one-dimensional Ising model with a mean field correction and were found to be anisotropic with ferromagnetic intrachain interactions along the b-axis and weaker antiferromagnetic interchain interactions.     

Indium-induced superstructures formed on Si(1 1 0) surfaces

Si(1 1 0) surfaces covered with small amounts of In deposit and then annealed at high temperature were investigated by RHEED, and two kinds of superstructures with A = 3a and B = −a + 4b, and A = 3a − 2b and B = −2a + 4b as primitive translational vectors are reported to form on the surfaces.     

Relative power loss of misalignment based on electro-optical printed circuit board

In this paper, the power loss values between 45° total internal reflecting waveguide mirror (TIRWM) and the polymer optical waveguide layer are obtained by vector finite element method. There are some misalignments during an actual fabrication of electro-optical printed circuit board (EOPCB). And, b, a, c correspond to the error value of alignment in the x-axis, y-axis and z-axis direction, respectively. Another, four effective refractive indices of the 45° TIRWM and polymer optical waveguide layer are calculated, separately. And, n_eff1 = 1.425211 is uniquely chosen. Next, these relative power errors Δ are calculated, when a, b, c separately change. Moreover, these error values are plotted into some curved surface figures. By these figures, it is easy to find the relationship between a, b, c and Δ. Furthermore, it is beneficial for us to avoid the region of larger power loss during an actual fabrication of EOPCB.     

Photophysical characteristics of 4,4′-bis(N-carbazolyl)tolan derivatives and their application in organic light emitting diodes

4,4′-bis(N-carbazolyl)tolan (BCT) and 4,4′-bis[N-(3,6-di-t-butyl)carbazolyl]tolan (BCT-t-Bu) were synthesized as π-expanded analogs of 4,4′-bis(N-carbazolyl)biphenyl. Their photophysical characteristics both in solution and films were thoroughly investigated. Interestingly, the phosphorescence spectrum of BCT was significantly medium-dependent, and the emission maximum was red-shifted by 131 nm from 489 nm in solution at 77 K to 620 nm in a deposited film at 5 K, suggesting the presence of strong intermolecular interactions in the film. BCT and BCT-t-Bu were found to be useful as host materials for fluorescence-based organic light emitting diodes (OLEDs). However, their low triplet energy levels in films negated their potential to act as hosts in phosphorescence-based OLEDs.     

Photoconductivity of thin organic films

Thin organic films were deposited on silicon oxide surfaces with golden interdigitated electrodes (interelectrode gap was 2 μm), and the film resistivities were measured in dark and under white light illumination. The compounds selected for the measurements include molecules widely used in solar cell applications, such as polythiophene (PHT), fullerene (C₆₀), pyrelene tetracarboxylic diimide (PTCDI) and copper phthalocyanine (CuPc), as well as molecules potentially interesting for photovoltaic applications, e.g. porphyrin-fullerene dyads. The films were deposited using thermal evaporation (e.g. for C₆₀ and CuPc films), spin coating for PHT, and Langmuir-Schaeffer for the layer-by-layer deposition of porphyrin-fullerene dyads. The most conducting materials in the series are films of PHT and CuPc with resistivities 1.2 × 10³ Ω m and 3 × 10⁴ Ω m, respectively. Under light illumination resistivity of all films decreases, with the strongest light effect observed for PTCDI, for which resistivity decreases by 100 times, from 3.2 × 10⁸ Ω m in dark to 3.1 × 10⁶ Ω m under the light.     

Sensitized luminescence of Eu and Tb macrocyclic complexes bearing benzophenone antennae

Sensitized luminescence behavior of lanthanide (Ln=Eu³⁺, Tb³⁺) macrocyclic cyclen (1,4,7,10-tetraazacyclododecane) complexes bearing one or four benzophenone (BP) moieties as antenna (LnL1 and LnL4) has been studied in water. Despite higher molar extinction coefficient of EuL4 owing to four antennae, it shows only one-thirtieth the luminescence intensity of EuL1. Energy level of triplet excited-state of BP antenna (E_T) is only a few kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺, thus promoting a back energy transfer (BET) from ⁵D₂ of Eu³⁺ to ground-state BP antennae. On EuL4 bearing four antennae, BET occurs more rapidly than that on EuL1, thus exhibiting much weaker luminescence. For Tb complexes, the energy gap between E_T of BP antenna and ⁵D₄ excited state of Tb³⁺ is large enough (>13 kJ mol⁻¹), such that practically no BET occurs. The luminescence intensity of TbL4 is, however, lower (two-third) than that of TbL1. Time-resolved luminescence measurement reveals that hydration number of Tb³⁺ within TbL4 is twice that within TbL1. This is because the structural distortion of ligands on TbL4, caused by an intramolecular dipole-dipole interaction among the BP antennae, allows coordination of higher number of H₂O molecules to Tb³⁺, thus leading to a strong Tb luminescence quenching via O-H oscillators.     

Structurally Simple Ferrocene Derivatives for Selective Cadmium Sensing

Three new ferrocene based Schiff bases 4-{[(E)-ferrocenylmethylidene] amino}benzenethiol (1b), 3-{[(E)-ferrocenylmethylidene]amino} benzenethiol (1c), 2-{[(E)-ferrocenylmethylidene]amino} benzenethiol (1d) have been synthesized to study their sensor property to various metal ions. It has been observed that 1b is highly fluorescent and its fluorescence changes in presence of metal ions. It was further observed that compound 1b is highly selective towards Cd²⁺ ion in solution.     

Reversible photomagnetism in a cobalt layered compound coupled with photochromic diarylethene

Photomagnetism is one of the most attractive topics in recent research on molecular solids. In order to produce a photo-controllable magnet, we have synthesized a novel organic-inorganic hybrid system coupled with a photochromic diarylethene anion, 2,2′-dimethyl-3,3′-(perfluorocyclopentene-1,2-diyl)bis(benzo[b]thiophene-6-sulfonate) (1a) and cobalt LDHs (layered double hydroxides). Based on the elemental analysis, the title compound, which was synthesized by the anion exchange reaction between Co₂(OH)₃(CH₃COO)·H₂O (2) and 1a, has the chemical composition, Co₄(OH)₇(1a)_0.5·3H₂O (3). Powder X-ray diffraction analysis revealed the interlayer distance of c=27.8 Å. The magnetic susceptibility measurements elucidated the ferromagnetic intra- and inter-layer interactions and the Curie temperature of T_c=9 K. By UV irradiation of 313 nm, 3 shows the photo-isomerization of diarylethene anion from the open form to the closed one in solid state, which leads to the decreases in the coercive field and the remnant magnetization. Furthermore, the photo-excited state is returned to the initial state (open form) almost reversibly by visible irradiation of 550 nm.     

Sensitized luminescence properties of dinuclear lanthanide macrocyclic complexes bearing a benzophenone antenna

Dinuclear lanthanide (Ln=Tb³⁺ or Eu³⁺) complexes (Ln₂L2) of two octadentate macrocyclic polyaminopolycarboxylic ligands connected through a benzophenone (BP) moiety (L2) have been synthesized. Sensitized luminescence properties of Ln₂L2 in water have been studied in comparison to those of BP-conjugated mononuclear Ln complexes (LnL1). The luminescence intensity of Tb₂L2 is lower than that of TbL1 because of lower triplet quantum yield of the BP moiety. In contrast, Eu₂L2 shows higher intensity than EuL1. For both Eu complexes, energy level of triplet excited-state BP (³BP*) is only 3 kJ mol⁻¹ higher than that of ⁵D₂ excited-state of Eu³⁺. The ⁵D₂ state formed by a triplet-energy transfer (TET) from ³BP* is therefore deactivated by a back energy transfer (BET) to the ground-state BP, resulting in low luminescence intensity of EuL1. In contrast, within Eu₂L2, TET from ³BP* to ⁵D₀ state of two Eu³⁺ ions is accelerated, thus leading to higher luminescence intensity. Another notable feature of Eu₂L2 is the luminescence quantum yield independent of its concentration. In contrast, for EuL1 system, an intermolecular BET occurs from ⁵D₂ state of Eu³⁺ to the ground-state BP conjugated to another EuL1 complex, resulting in a yield decrease with the concentration increase.     

Interaction between 1-[p-(dimethylamino) benzoyl]-4′-phenyl-semicarbazide and Cu

A new compound, 1-[p-(dimethylamino)benzoyl]-4′-phenyl-semicarbazide (1) was synthesized and showed highly selective response to Cu²⁺ over other metal ions such as Pb²⁺, Mg²⁺, Fe²⁺, Co²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Ca²⁺, Ag⁺, Na⁺, K⁺, and Li⁺. The control compound, 1-[p-(dimethylamino)benzoyl]-4-phenyl-thiosemicarbazide (2), showed different fluorescence spectral response to Cu²⁺. A 1:1 complex between Cu²⁺ and 1 was formed while 1:1 and 1:2 complexes between Cu²⁺ and 2 were formed. The binding model between the receptor (1 or 2) and Cu²⁺ was supported by IR spectra, mass spectra, and computation model. 1 possessed higher selectivity towards Cu²⁺ compared with 2 owing to the difference of complexation ability between urea and thiourea groups.     

Eu(III) and Tb(III) luminescent lanthanide systems derived from DTPA-bisamide and DTTA-based ligands incorporating bipyridine antenna

Four new polycarboxylate ligands H₃Lⁿ have been synthesized by the attachment of two or one 2,2′-bipyridine subunits onto a diethylenetriamine pentacarboxylic acid (DTPA-bisamide derivatives: H₃L¹, H₃L²) or a diethylenetriamine tricarboxylic acid (DTTA derivatives: H₃L³, H₃L⁴) core. The neutral Eu^III and Tb^III complexes of these chelates have been prepared and studied from their UV-vis and luminescence data. The main photophysical characteristics of these complexes, i.e. the absorption and luminescence spectra, the metal-centred lifetimes and the overall luminescence yields (Φ) were measured in buffered aqueous solutions. In addition the role played by non-radiative paths (vibrational energy transfer involving coordinated water molecules, involvement of ligand-to-metal charge-transfer excited states, or metal→ligand back-transfer) was investigated. In all complexes, we found that the bidentate bipyridine chromophore is not coordinated to the lanthanide ion, allowing one (LnL¹, LnL²) or two (LnL³, LnL⁴) water molecules to penetrate the first coordination sphere of the metal. Although the bipyridine chromophore behaves as remote (from the binding site) light-harvesting unit for the lanthanide ion in these systems, a sizeable sensitization of the Eu- and Tb-centred luminescence can be effective (LnL², LnL³, Φ=16-19% in aerated D₂O solutions). Our photophysical investigations show that overall non-radiative deactivation is not dependant of thermally activated non-radiative channels but the efficiency of the ligand→Ln intramolecular energy transfer has to be taken into account to explain the obtained results.     

Effect of C and SiC additions into in situ or mechanically alloyed MgB2 deformed in Ti sheath

Effect of 3.4 wt.% C and 5 wt.% SiC doping into the standard in situ (IN) process and mechanically alloyed (MA) MgB₂ was studied. Powders of IN and MA process were carried out in air and in argon filled glove box, respectively. Wire samples were prepared by two-axial rolling deformation of IN and MA powders inside the Ti tube. Titanium as sheath material allows to use higher sintering temperatures, we used 700 °C and 800 °C for 30 min in Argon. Critical current densities (J_c) were measured at variable temperatures 4.2 K, 10 K, 15 K and 20 K in the external magnetic fields ranging to 15 T. Critical temperatures, upper critical fields and irreversibility fields of IN and MA with SiC and C additions are compared and discussed. The highest transport properties were observed for wires with MA SiC doped MgB₂ in the whole scale of temperatures 4.2–20 K. Upper critical field was rapidly enhanced in the case of carbon doped MA samples at 4.2 K. MA samples have shown decreased J_c values for higher temperatures (15 K, 20 K), in some case even worse than for the not doped reference IN sample. Carbon substitution and grain connectivity of analyzed samples are compared and discussed. Presented results show that for 20 K applications some new ways (additions) have to be found for increasing the J_c substantially.     

A Novel Series Colorimetric and Off–On Fluorescent Chemosensors for Fe3+ Based on Rhodamine B Derivative

A novel series colorimetric and off–on fluorescent chemosensors (2a, 2b, 2c) were designed and synthesized, which showed reversible and highly selective and sensitive recognition toward Fe³⁺ over other examined metal ions. Upon addition of Fe³⁺, sensors (2a, 2b) exhibit remarkably and 2c exhibits moderate enhanced absorbance intensity and color change from colorless to pink in CH₃OH–H₂O(1:1, v/v). The three compounds (2a, 2b, 2c) may therefore be applicable as rhodamine-based turn-on type fluorescent chemosensors.     

Supramolecular selectivity of [60]-fullerene among equivalently photoactive porphyrins

The photophysical investigation of different para-substituted tetraphenylporphyrins (TP), viz., meso-tetra(4′-hydroxyphenyl)-21H-23H-porphyrin(1),meso-tetrakis(4′-hex-5-enyloxyphenyl)-21H-23H-porphyrin(2), meso-tetrakis(4′-oct-7-enyloxyphenyl)-21H-23H-porphyrin(3) and meso-tetrakis(4′-undecyloxyphenyl)-21H-23H-porphyrin (4) revealed that except for quantum yield (φ) the para-substitution has little effect on any other photophysical properties like lifetime, excitation, emission wavelength, etc. The host-guest type interactions of these tetraarylporphyrins (TP 1-4), with [60]-fullerene (F) have been studied with ¹H NMR and fluorescence spectrometric techniques in carbon tetrachloride medium. Fluorescence studies revealed that the Q band of the TPs was sufficiently quenched upon addition of F. All the fullerene/porphyrin systems were found to produce stable complexes with 1:1 stoichiometry. Binding constants (K) of all the fullerene/porphyrin complexes have been determined by fluorescence quenching method. The association constant values for 1/F have been determined from plots of the Stern-Volmer equation (103.713×10⁴) and the Benesi-Hildebrand equation (110.440×10⁴). It has been observed that the insertion of long chain oxo-alkenyl/alkyl group in the para position of TPs in 2, 3 and 4 diminished the K values for F by two, four and even ten times with respect to that of 1. The observed trend in variation of the binding constants was supported by a gradual variation in the shift of ¹H NMR signal when measurements were carried out in CDCl₃.     

Photoluminescent properties of heteroleptic cyclometalated platinum(II) complexes bearing 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dionate as an ancillary ligand

A new series of heteroleptic cyclometalated platinum(II) complexes Pt-1a-f was synthesized, employing 2-arylpyridine (or 1-arylisoquinoline) (HC^∧N-1) and 1,3-bis(3,4-dibutoxyphenyl)propane-1,3-dione (HO^∧O-1) for cyclometalation and as ancillary ligands, respectively, and photoluminescent properties were investigated. Focusing on red-shifted phosphorescence, C^∧N ligands containing π-extended aromatics and electron-rich heterocycles were examined. All obtained complexes exhibited photoluminescence at ambient temperature, and the emission maxima ranged from green (λ_PL=518 nm) to far red (λ_PL=708 nm). The large Stokes shifts of more than 100 nm and sub-microsecond or microsecond emission lifetimes revealed that these complexes are phosphorescent emissive. The quantum yield of Pt-1 ranged from 0.02 to 0.59 at ambient temperature and decreased as the emission maximum was red-shifted. In comparison with the reference platinum(II) complexes, Pt-2 bearing an aliphatic ancillary ligand, such as 2,2,6,6-tetramethylheptane-3,5-dionate (O^∧O-2), the ligand O^∧O-1 did not significantly affect the photoluminescence emission maxima, indicating that the energy gap between the singlet ground state and the triplet level was predominantly dependent on the C^∧N ligand.     

Self-consistent treatment of spin and magnetization dynamic effect in spin transfer switching

The effect of itinerant spin moment (m) dynamic in spin transfer switching has been ignored in most previous theoretical studies of the magnetization (M) dynamics. Thus in this paper, we proposed a more refined micromagnetic model of spin transfer switching that takes into account in a self-consistent manner of the coupled m and M dynamics. The numerical results obtained from this model further shed insight on the switching profiles of m and M, both of which show particular sensitivity to parameters such as the anisotropy field, the spin torque field, and the initial deviation between m and M.