A series of copper complexes with carbazole and oxadiazole moieties: Synthesis,characterization and luminescence performance

In this paper, various moieties of ethyl, carbazole and oxadiazole are attached to 2-thiazol-4-yl-1H-benzoimidazole to form a series of diamine ligands. Their corresponding Cu(I) complexes are also synthesized using bis(2-(diphenylphosphanyl)phenyl) ether as the auxiliary ligand. Crystal structures, thermal property, electronic nature and luminescence property of these Cu(I) complexes are discussed in detail. These Cu(I) complexes are found to be efficient green-emitting ones in solutions and the emissive parameters are improved largely by the incorporation of substituent moieties. Detailed analysis suggests that the effective suppression of solvent-induced exciplex quenching is responsible for this phenomenon. On the other hand, the introduction of substituent moieties exerts no obvious influence on molecular structure, thermal stability and emitting-energy of the Cu(I) complexes, owing to their absence from inner coordination sphere.     

A series of copper(I) complexes with electron donor/acceptor embedded ligands: Synthesis, photophysical and electroluminescent properties

In this paper, we report the synthesis of four diimine ligands incorporated with an electron donor/acceptor, as well as their corresponding Cu(I) complexes with bis(2-(diphenylphosphanyl)phenyl) ether as an ancillary ligand, resulting in four phosphorescent Cu(I) complexes. Their crystal structures as well as photophysical and thermal properties are discussed in detail. Experimental data and theoretical calculations confirm that electron donor moieties and limited conjugation system may self-restrict geometry relaxation in excited states, leading to narrowed and blue-shifted emission bands. On the other hand, electron acceptor moieties and large coplanar conjugation system are ineffective in restricting geometry relaxation, leading to broadened and red-shifted emission bands. However, the introduction of electron donors compromises thermal stability of Cu(I) complexes. We also explore one of the Cu(I) complexes as a dopant for electroluminescence application, and a maximum luminance of 680 cd/m² peaking at 620 nm is achieved.     

Bright electrophosphorescent devices based on sterically hindered spacer-containing Cu(I) complex

A Cu(I) complex, [Cu(Dppp)(DPEphos)]BF₄ (Dppp=2,3-diphenyl-pyrazino[2,3-f][1,10]phenanthroline, DPEphos=Bis[2-(diphenylphosphino)phenyl]ether), is synthesized and used as the dopant in bright electrophosphorescent devices with the general structure ITO/m-MTDATA (30 nm)/NPB (20 nm)/CBP: ×wt% [Cu(Dppp)(DPEphos)]BF₄ (30 nm)/Bphen (20 nm)/Alq₃ (20 nm)/LiF (0.8 nm)/ Al (200 nm). These devices exhibit a maximum brightness of 4483 cd/m² and a peak efficiency of 3.4 cd/A. Compared with previously reported similar devices based on Cu(I) complexes, the brightness of the devices presented in this article is the best. Meanwhile, 2% [Cu(Dppp)(DPEphos)]BF₄-based devices exhibit white light-emitting properties with CIE coordinates of (0.32. 0.35) at 10 V.     

High light electroluminescence of novel Cu(I) complexes

Three novel Cu(I) complexes, [CuDPEphos(NN)]BF₄, where NN=1-(4-5′-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (OXD-Pybm; L1) (1), 1-(4-carbazolylbutyl)-2-pyridinylbenzimidazole (Carl-Pybm; L2) (2), and 1-H-2-pyridinylbenzimidazole (HPybm; L3) (3), were synthesized. The photoluminescent (PL) properties of 1-3 and the electroluminescent (EL) properties of complexes 1 and 2 were systematically studied. The maximum brightness of 2-based devices was 8669 cd/m², which should be the best among the reported Cu(I) complexes-based devices.     

A terbium (III) complex with triphenylamine-functionalized ligand for organic electroluminescent device

A novel ligand, 4-diphenylamino-benzoic acid (HDPAB), and the corresponding Tb (III) complex, Tb (DPAB)₃ which can be dissolved easily in organic solvents were synthesized and characterized. Organic electroluminescent (EL) device with a structure of indium tin oxide (ITO)/poly(N-vinylcarbazole) (PVK): Tb (DPAB)₃ (50 wt%, 80 nm)/1,3,5-tris-(N-phenylbenzimidazol-2-yl)benzene (TPBI) (30 nm)/tri(8-hydroxyquinoline)aluminum (AlQ) (20 nm)/LiF (1 nm)/Al (150 nm) in which Tb (DPAB)₃ acted as an emitter were fabricated. The maximum luminance of 230 cd m⁻² at 20 V and the maximum efficiency of 0.62 cd A⁻¹ were obtained due to the introduction of hole-transporting group, representing the best result to date among Tb (III) carboxylate complexes based EL devices. These results indicate that modifications of rare earth complexes are a promising way to improve the properties of EL devices.     

An investigation of the surface chemistry of methyl pyruvate on Cu(1 1 1)

The surface chemistry of an α-ketoester, methyl pyruvate, has been studied on a model Cu(1 1 1) single crystal surface. Monolayers of methyl pyruvate at 180 K consist predominately (ca. 66%) of a chemisorbed methyl pyruvate moiety, with its keto-carbonyl bonded to the surface in a η² configuration, this moiety desorbs intact at 365 K. The rest of the monolayer contains weakly adsorbed methyl pyruvate, which desorbs at 234 K, which interacts with the surface through the lone pair electrons of the oxygen atoms of the CO groups, adopting a η¹ configuration. Previous studies of simple ketones on model noble metal surfaces have only observed weakly bonded η¹ configurations. The observation of a strongly chemisorbed moiety in the present study is attributed to the activation of the keto-carbonyl by the electron withdrawing ester group. This behaviour is consistent with the homogeneous inorganic chemistry of ketones. Given both the formation of a η² bonded methyl pyruvate moiety on Cu(1 1 1) and the known activity of Cu as a selective hydrogenation catalyst, it is suggested that it maybe worthwhile considering the possibility of testing the effectiveness of chirally modified supported Cu as an enantioselective catalyst.     

Synthesis and luminescent properties of Cu(II), Zn(II) polymeric complexes with electron- and hole-transporting groups

A novel ligand 3,6-bis(1,10-phenathroline-[5,6-d] imidazole-2-yl)carbazole (Bpic) containing hole- and electron-transporting groups was firstly designed. Its polymeric complexes of Bpic with Cu(∥), Zn(∥) were successfully synthesized. The UV-vis absorption, fluorescence spectra and thermal properties of these complexes were investigated. At room temperature, complexes 2, 3 emit blue luminescence from 445 to 485 nm in DMSO solution, and emit green/yellow and orange luminescence from 523 to 585 nm in solid state. In comparison with the free ligand, the polymeric complexes exhibit a bathochromic shift. It can be assigned to the extended π-conjugation of the complexes.     

Synthesis,Crystal Structures and Photo- and Electro-Luminescence of Copper(I) Complexes Containing Electron-Transporting Diaryl-1,3,4-Oxadiazole

Two mononuclear Cu(I) complexes based on 2-(2-pyridyl)benzimidazolyl derivative ligand containing electron-transporting 1,3,4-oxadiazole group (L), [Cu(L)(PPh₃)₂](BF₄) and [Cu(L)(DPEphos)](BF₄), where L?=?1-(4-(5-(4-tert-butylphenyl)-1,3,4-oxadiazol-2-yl)benzyl)-2-(pyridin-2-yl)benzimidazole and DPEphos?=?bis[2-(diphenylphosphino)phenyl]ether, have been successfully synthesized and characterized. The X-ray crystal structure analyses of the ligand L and the complex [Cu(L)(PPh₃)₂](BF₄) were described. The photophysical properties of the complexes were examined by using UV–vis, photoluminescence spectroscopic analysis. The doped light-emitting devices using the Cu(I) complexes as dopants were fabricated. With no electron transporting layers employed in the devices, yellow electroluminescence from Cu(I) complexes were observed. The devices based on the complex [Cu(L)(DPEphos)](BF₄) possess better performance as compared with the devices fabricated by the complex [Cu(L)(PPh₃)₂](BF₄). The devices with the structure of ITO/MoO₃ (2 nm)/NPB (40 nm)/CBP:[Cu(L)(DPEphos)](BF₄) (8 wt%, 30 nm)/BCP (30 nm)/LiF (1 nm)/Al (150 nm) exhibit a maximum efficiency of 3.04 cd/A and a maximum brightness of 4,758 cd/m².     

Impact of substituents in the NN ligand on the emission wavelength of Cu(I) complexes: Insight from experimental and theoretical approach

Three mononuclear Cu(I) complexes [Cu(bop)(PPh₃)₂][BF₄], [Cu(fop)(PPh₃)₂][BF₄] and [Cu (pop)(PPh₃)₂][BF₄] were synthesized, where 2-(5-tert-butyl-1,3,4-oxadiazol-2-yl)pyridine (bop), 2-(5-(trifluoromethyl)-1,3,4-oxadiazol-2-yl)pyridine (fop) or 2-(5-phenyl-1,3,4-oxadiazol-2-yl)pyridine (pop) was used as N^∧N chelate ligand and triphenylphosphine was used as ancillary ligand. Several substituents with different electronic effects, such as tert-butyl (t-Bu), trifluoromethyl (CF₃) and phenyl (Ph) groups, were introduced into the 1,3,4-oxadiazole moiety of the N^∧N chelate ligands. The photophysical properties of the complexes were examined by UV-vis absorption and photoluminescence (PL) spectroscopies. The complex [Cu(fop)(PPh₃)₂][BF₄] with a CF₃ group in the N^∧N chelate ligand exhibited the lowest energy absorption and emission band. Electrochemical analyses combined with density functional theory (DFT) calculations established that the introduction of electron withdrawing group (CF₃) decreases the HOMO-LUMO energy gap, and the introduction of electron donating group (t-Bu) into the 1,3,4-oxadiazole moiety has a similar effect on the emission wavelength as that of the introduction of a phenyl group with a π-conjugation.     

New erbium complexes emitting in infrared region based on oligothiophene and thiophenefluorene carboxylate

Lanthanide ions emitting in the near-infrared (NIR) region possess an intrinsically small molar absorption coefficient in the ultraviolet (UV)-vis-NIR spectrum, which is unfavourable for pumping efficiency. On the contrary, using organic lanthanide complexes it is possible to populate the excited state levels of the emitting ion through an efficient intramolecular energy transfer from the optically excited ligands, which act as light-harvesting antennae.With the aim of studying and maximizing the transfer to lanthanide metals, we have synthesized oligothiophene and thiophenefluorene ligands bearing carboxylate clamps able to complex erbium and other lanthanide 3⁺ ions. The complexes of {4′-(hydroxycarbonyl)methyl-[2,2′;5′,2″]terthiophen-3′-yl}acetic acid and 9-(hydroxycarbonyl)-methyl-2,7-dithien-2-yl-[fluoren-9-yl-]acetic acid with Er³⁺ and different ancillary ligands have been prepared and their optical properties were carefully studied. Moreover, relaxation dynamics measurements have been carried out on all complexes in order to determine emission lifetimes, which result to be of the order of magnitude 2 μs. Quantum chemical calculations have been performed to explain optical absorption data in terms of different coordination types. The complexes containing phenanthroline/pyridine are modelled by adding to the dianion of the ligand one univalent/divalent counterion. The absorption spectra computed in this way are in close agreement with experiment, and the univalent→divalent theoretical wavelength shift goes in the right direction. The addition of a counterion has an even bigger effect on the triplet states, and hence on their matching with the emitting states of the ion.     

High performance polymer light-emitting diodes doped with a novel phosphorescent iridium complex

High performance polymer light-emitting diodes (PLEDs) based on a phosphor of noble metal complex bis(1,2-dipheny1-1H-benzoimidazole) iridium (acetylacetonate) [(pbi)₂Ir(acac)] doped in poly(N-vinylcarbazole) (PVK) host with various concentration were demonstrated. The photoluminescence (PL) and electroluminescence (EL) spectra of the PLEDs exhibited an emission intensity decrease of PVK and a gradually enhanced feature of (pbi)₂Ir(acac) with increased doping concentration. The device with a 5 wt% (pbi)₂Ir(acac) doped PVK system showed a high power efficiency of 3.84 lm/W and a luminance of 26,006 cd/m². The results indicated that both energy transfer and charge trapping have a significant influence on the performance of PLEDs. The devices have a broadened EL spectrum of full-width at half-maximum (FWHM) more than 100 nm, which can be realized for WOLEDs.     

Synthesis, crystal structure and blue electroluminescence of a new zinc complex based on 2,6-bis(benzimidazolyl)pyridine

A very stable and blue luminescent complex Zn(bbp)Cl₂ (bbp: 2,6-bis(benzimidazolyl)pyridine) was synthesized. X-ray crystal structural analysis for the complex revealed that there are intermolecular π?π interactions in the solid state. The fluorescence properties for this complex were studied. The similar devices with the structure of [ITO/CuPc(31 nm)/NPB(80 nm)/[Zn(bbp)Cl₂] (or L) (85 nm)/LiF15/Al] were constructed to investigate their electroluminescent performance. Both the complex and the ligand can be fabricated as blue-emitting materials. The complex shows emission peak at 555 nm, electroluminescent efficiency 0.017 cd A⁻¹ and turn-on voltage 7 V, compared to 470 nm, 0.036 cd A⁻¹ and 9 V for the ligand.     

A novel Re(I) complex for electroluminescence application: synthesis, theoretical studies, photophysical and electroluminescent properties

In this paper, we report a novel phosphorescent Re(I) complex of Re(CO)₃(ETCP)Br, where ETCP=1-ethyl-2-naphthalen -1-yl-1H-1,3,7,8-tetraaza-cyclopenta[l]phenanthrene, including its photophysical properties, geometric/electronic structures, electrochemical and thermal properties. Experimental data suggest that Re(CO)₃(ETCP)Br is a promising yellow emitter peaking at 540--nm with short excited state lifetime of ∼0.06 μs. Re(I) center localizes in a distorted octahedral field in Re(CO)₃(ETCP)Br and the emissive state of Re(CO)₃(ETCP)Br has metal-to-ligand-charge-transfer character, leading to the room-temperature phosphorescence. Further analysis reveals that Re(CO)₃(ETCP)Br has HOMO and LUMO energy levels at −6.03 V and −3.56 V, respectively, as well as its high thermal decomposition temperature of 377 °C. Using Re(CO)₃(ETCP)Br as a dopant, an electroluminescence peaking at 565-nm is realized, with a maximum luminance of 5900 cd/m² and a maximum current efficiency of 11.3 cd/A.     

Synthesis, characterization and spectroscopic investigation of new tetrakis(acetylacetonato)thulate(III) complexes containing alkaline metals as countercations

In this work a series of tetrakis complexes C[Tm(acac)₄], where C⁺=Li⁺, Na⁺ and K⁺ countercations and acac=acetylacetonate ligand, were synthesized and characterized for photoluminescence investigation. The relevant aspect is that these complexes are water-free in the first coordination sphere. The emission spectra of the tetrakis Tm³⁺-complexes present narrow bands characteristic of the ¹G₄→³H₆ (479 nm), ¹G₄→³F₄ (650 nm) and ¹G₄→³H₅ (779 nm) transitions of the Tm³⁺ ion, with the blue emission color at 479 nm as the most prominent one. The lifetime values (τ) of the emitting ¹G₄ level of the C[Tm(acac)₄] complexes were 344, 360 and 400 ns for the Li⁺, Na⁺ and K⁺ countercations, respectively, showing an increasing linear behavior versus the ionic radius of the alkaline ion. An efficient intramolecular energy transfer process from the triplet state (T) of the ligands to the emitting ¹G₄ state of the Tm³⁺ ion is observed. This fact, together with the absence of water molecules in first coordination sphere, allows these tetrakis Tm³⁺-complexes to act as efficient blue light conversion molecular devices.     

Bromine atom diffusion on stepped and kinked copper surfaces

The rates of Br atom diffusion on several single crystalline Cu surfaces have been studied because of the potential impact of Br diffusion on the selectivity of alkyl bromide surface chemistry on Cu. Density functional theory (DFT) has been used to study the diffusion of isolated bromine atoms on a flat Cu surface, Cu(1 1 1), two Cu surfaces with straight steps, Cu(2 2 1) and Cu(5 3 3), and two kinked Cu surfaces, Cu(6 4 3) and Cu(5 3 1). Bromine diffusion is rapid on the flat Cu(1 1 1) surface with a barrier of ΔE_diff = 0.06 eV and a hopping frequency of ν = 4.8 × 10¹⁰ s⁻¹ at 150 K. On the stepped and kinked surfaces the effective diffusion barriers lie in the range ΔE_diff = 0.18-0.31 eV. Thus the rates of diffusion are many orders of magnitude slower on stepped and kinked Cu surfaces than on the Cu(1 1 1) surface. Nonetheless, at temperatures relevant for alkyl bromide debromination on Cu surfaces, bromine atoms remain sufficiently mobile that they can explore all available binding sites on the timescale of the debromination reaction.     

Polymetallic citric complexes as precursors for spray-pyrolysis deposition of thin ferrite films

Thin films of ferrites of the type M^IIFe₂O₄ (M = Cu, Mg, Zn) are prepared by spray-pyrolysis using ethylene glycol solutions of mixed-metal citric complexes of the respective metals at substrate temperature between 350 °C and 450 °C and post-deposition annealing at 480-750 °C in air. Phase composition, crystal structure, morphology and adhesion of the obtained films (40-400 nm in thickness) are studied by X-ray diffraction, SEM, energy dispersive X-ray microanalysis and AFM. Single phase dense uniform films with grains from 30-100 nm (M = Cu, Mg) to 0.15-2 μm (M = Zn) are obtained.     

Synthesis, characterization, growth mechanism, photoluminescence and field emission properties of novel dandelion-like gallium nitride

Dandelion-like gallium nitride (GaN) microstructures were successfully synthesized via Ni catalyst assisted chemical vapor deposition method at 1200 °C under NH₃ atmosphere by pre-treating precursors with aqueous ammonia. The as-synthesized product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). X-ray diffraction analysis revealed that as-synthesized dandelion-like GaN was pure and has hexagonal wurtzite structure. SEM results showed that the size of the dandelion-like GaN structure was in the range of 30-60 μm. Dandelion-like GaN microstructures exhibited reasonable field emission properties with the turn-on field of 9.65 V μm⁻¹ (0.01 mA cm⁻²) and threshold field of 11.35 V μm⁻¹ (1 mA cm⁻²) which is sufficient for applications of electron emission devices, field emission displays and vacuum micro electronic devices. Optical properties were studied at room temperature by using fluorescence spectrophotometer. Photoluminescence (PL) measurements of dandelion-like GaN showed a strong near-band-edge emission at 370.2 nm (3.35 eV) with blue band emission at 450.4 nm (2.75 eV) and 465.2 nm (2.66 eV) but with out yellow band emission. The room-temperature photoluminescence properties showed that it has also potential application in light-emitting devices. The tentative growth mechanism for the growth of dandelion-like GaN was also described.     

Cu adsorption on pyrite (1 0 0): Ab initio and spectroscopic studies

Surface optimised S 2p photoelectron spectra show that both surface S²⁻ monomers and (S-S)²⁻ dimers are present at pyrite (1 0 0) fracture surfaces. In order to determine which sulfur species are involved in Cu adsorption, fresh pyrite surfaces were exposed to Cu²⁺ in solution. The S 2p spectra suggest that both types of S surface species are involved in the mechanism of Cu adsorption (activation). Ab initio density functional theory was used to model Cu adsorbed onto pyrite (1 0 0) to support the interpretation of the spectroscopy. Mulliken population analysis confirms the charge distribution suggested by the core line shifts as observed in the photoelectron spectra. The ab initio calculations were consistent with a two-coordinate bond between Cu(I), a surface S monomer and a surface S dimer.     

Synthesis and characterization of sprayed Zn-doped polycrystalline CuInS2 thin films

Copper indium disulphide (CuInS₂) is an efficient absorber material for photovoltaic applications. In this work Zn (0.02 and 0.03 M) doped CuInS₂ thin films are (Cu/In = 1.25) deposited onto glass substrates in the temperature range 300–400 °C. XRD patterns depict, Zn-doping facilitates the growth of CuInS₂ thin films along (1 1 2) preferred plane and other characteristic planes. Optical studies show, 90% of light transmission occurs in the IR regions; hence Zn-doped CuInS₂ can be used as an IR transmitter. The absorption coefficient in the UV–vis region is found to be in the order of 10⁴–10⁵ cm⁻¹. Optical band gap energies increase with increase of temperatures (0.02 M – (1.93–2.05 eV) and 0.03 M – (1.94–2.04 eV)). Well defined, broad Blue and Green band emissions are exhibited. Resistivity study reveals the deposited films exhibit semiconducting nature. Zn species can be used as a donor and acceptor impurity in CuInS₂ films to fabricate efficient solar cells and photovoltaic devices.     

Thermoluminescence studies on Cu-doped Li2B4O7 single crystals

Lithium tetraborate (Li₂B₄O₇) is a tissue equivalent material and single crystals of this material doped with Cu are promising for dosimetric applications. In the present study highly transparent single crystals of lithium tetraborate (Li₂B₄O₇) doped with Cu (0.5 wt%) have been grown using the Czochralski technique. The Li₂B₄O₇:Cu crystals were studied using photoluminescence, X-ray diffraction (XRD), UV-vis transmission, time resolved fluorescence and thermoluminescence (TL) techniques. The TL readout of Li₂B₄O₇:Cu crystals showed two well-defined glow peaks at 402 K (peak-1) and 513 K (peak-2) for a 4 K/s heating rate. While the low temperature TL peak-1 fades completely within 24 h at room temperatures, the main dosimetric peak-2 remains the same. The TL sensitivity of the grown single crystal is found to be 3.3 times that of a conventional TL phosphor, TLD-100. The Li₂B₄O₇:Cu crystals showed a linear TL dose-response in the range from 1 mGy to 1 kGy. The TL analysis using a variable dose method revealed first order kinetics for both the peaks. Trap depth and frequency factor for peak-1 were found to be 0.81 eV and 5.2×10⁹ s⁻¹, whereas for peak-2 the values were 1.7 eV and 1.7×10¹⁶ s⁻¹, respectively.