Synthesis and photopolymerizations of new phosphonated monomers for dental applications

Three novel phosphonated methacrylate monomers have been synthesized and studied for use in dental applications. Two of the monomers were synthesized from the reactions of glycidyl methacrylate (GMA) with (diethoxy‐phosphoryl)‐acetic acid (monomer 1 ) and (2‐hydroxy‐ethyl)‐phosphonic acid dimethyl ester (monomer 2 ). These monomers showed high crosslinking tendencies during thermal bulk and solution polymerizations. The third monomer (monomer 3 ) was prepared by the reaction of bisphenol A diglycidylether (DER) with (diethoxy‐phosphoryl)‐acetic acid and subsequent conversion of the resulting diol to the methacrylate with methacryloyl chloride. The homopolymerization and copolymerization behaviors of the synthesized monomers were also investigated with glycerol dimethacrylate (GDMA), triethylene glycol dimethacrylate (TEGDMA), and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (bis‐GMA) using photodifferential scanning calorimetry at 40 °C using 2,2′‐dimethoxy‐2‐phenyl acetophenone (DMPA) as photoinitiator. Monomer 1 showed polymerization rate similar or greater than dimethacrylates studied here but with higher conversion. The maximum rate of polymerizations decreased in the following order: 1 ～TEGDMA>GDMA～bis‐GMA～ 3 > 2 . A synergistic effect in the rate of polymerization was observed during copolymerizations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2290–2299, 2008     

Development of reactive phosphonated methacrylates

Five novel phosphonated mono‐ and dimethacrylate monomers have been synthesized by two different routes. Monomers 1 and 2 were synthesized by reactions of methacryloyl chloride with diethyl (2‐hydroxyphenyl) phosphonate or tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) bisphosphonate; monomers 3 and 4 by reactions of α‐(chloromethyl)acryloyl chloride (CMAC) first with dimethyl (2‐hydroxyethyl) phosphonate and then with benzoic or formic acids. The reaction of CMAC with two moles of dimethyl (2‐hydroxyethyl) phosphonate gave monomer 5 . Thermal homopolymerization of monomers 1 , 3 , 4 , and 5 and copolymerization of monomer 1 with methyl methacrylate (MMA) were investigated using azobisisobutyronitrile (AIBN) at 60 °C. Glass transition temperatures were observed for poly‐ 1 , poly(MMA‐co‐ 1 ) (50:50), poly(MMA‐co‐ 1 ) (90:10), PMMA, poly‐ 3 , and poly‐ 5 at 52, 90, 99, 129, 50, and 70 °C, respectively. TGA analysis of these polymers indicated formation of char on combustion. Homo‐ and/or copolymerization behavior of the synthesized monomers with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) were investigated with photodifferential scanning calorimetry. The maximum rate of polymerizations decreased in the following order: Bis‐GMA～ 3 > 1 > 4 > 5 . The conversions of monomers 1 , 3 , 4 , and 5 (73.9, 85.9, 98.2, and 62.2%) were very high compared with Bis‐GMA (40.5%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5737–5746, 2009     

Synthesis and evaluation of new phosphonic acid‐functionalized acrylamides with potential biomedical applications

Phosphorus‐containing acidic monomers are able to interact with the inorganic phase of mineralized tissues such as enamel, dentin, and bone. From this perspective, three phosphonic acid‐containing acrylamide monomers with different lengths of alkyl chains were synthesized to be used for both self‐etching dental adhesives and mineralized hydrogel scaffolds. Monomers were synthesized by the reaction of α‐aminophosphonates (diethyl aminomethylphosphonate, diethyl 2‐aminobutan‐2‐ylphosphonate, and diethyl 2‐aminooctan‐2‐ylphosphonate) with acryloyl chloride followed by the hydrolysis of phosphonate groups by using trimethylsilyl bromide. The properties such as pH in the range of mild self‐etching adhesives, hydrolytic stability, high rate of copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate, giving high‐molecular‐weight polymers on thermal polymerization, and strong decalcification ability of hydroxyapatite make these monomers good candidates for self‐etching adhesives, although no appreciable effect of the number and size of the α‐substituents was observed. Hydrogel scaffolds containing phosphonic acid groups were fabricated, characterized, and mineralized. Altogether, the results suggest that these phosphonic acid‐containing monomers have suitable properties to be used in fabrication of biomaterials for both dental and bone tissue engineering applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2755–2767     

Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Synthesis and evaluations of bisphosphonate‐containing monomers for dental materials

Two new bismethacrylamide ( 1 , 2 ) and two new methacrylamide ( 3 , 4 ) dental monomers were synthesized. In each group, one monomer contains a bisphosphonate group, the other a bisphosphonic acid group. Monomer 1 and 3 were synthesized by amidation of 2‐(2‐chlorocarbonyl‐allyloxymethyl)‐acryloylchloride and methacryloyl chloride with tetraethyl aminomethyl‐bis(phosphonate) and converted to the bisphosphonic acid monomers 2 and 4 by hydrolysis with trimethylsilyl bromide. Monomer 1 (m.p.: 71–72 °C), monomer 3 ( 33–34 °C), and monomer 4 (no m.p.) were obtained as white solids and monomer 2 a viscous liquid, soluble in water. Homopolymerization of 1 gave crosslinked polymers, indicating its low cyclization tendency. The photopolymerization studies indicated that its copolymerizability with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane and 2‐hydroxyethyl methacrylate (HEMA) without changing their rates and conversions significantly means that it could be used as a biocompatible crosslinker. Although monomer 2 showed low polymerizability, because of its good performance in terms of solubility, hydrolytic stability, hydroxyapatite interaction, acidity, and copolymerizability with HEMA, it shows potential to be used in self‐etching dental adhesives. The thermal polymerization of 3 resulted in soluble polymers and evaluation of monomer 4 in terms of solubility, acidity, and copolymerizability with HEMA indicated its potential as an adhesive monomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Development of reactive methacrylates based on glycidyl methacrylate

Six methacrylate monomers have been synthesized for use as reactive diluents in dental composites and evaluated to investigate the relationship between molecular structure and monomer reactivity. Four were synthesized by reactions of glycidyl methacrylate (GMA) with various acids, 2‐(2‐methoxyethoxy)acetic acid ( 1 ), 2‐(2‐(2‐methoxyethoxy)ethoxy)acetic acid ( 2 ), cyanoacetic acid ( 3 ), and benzoic acid ( 4 ); others were synthesized by reactions of GMA with diethyl hydrogen phosphate ( 5 ) or methanol ( 6 ). Monomers 1 and 2 are novel, 3 seems to be novel, 4 and 6 were synthesized via a novel method, and the synthesis of 5 was described in the literature. The monomers showed high crosslinking tendencies during thermal bulk polymerizations. The photo‐, homo‐, and copolymerization behavior of the monomers with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy)phenyl]propane (Bis‐GMA) were investigated. The maximum rate of polymerizations of monomers 2 – 6 was found to be greater than triethyleneglycol dimethacrylate, Bis‐GMA, 2‐hydroxyethyl methacrylate, and glycerol dimethacrylate. For the more reactive monomers ( 2 , 3 , and 4 ), the oxygen sensitivity of polymerization was found to be low due to a hydrogen abstraction/chain transfer reaction. The computationally calculated dipole moment and lowest unoccupied molecular orbital energies indicated that there seems to be a correlation between these quantities and reactivity for ester linked monomers ( 1 – 5 ), which was also supported by ¹³C NMR data. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3787–3796, 2010     

Synthesis and modeling of new phosphorus‐containing acrylates

New methacrylate monomers containing phosphonic acid or both phosphonic and carboxylic acids were synthesized through the reaction of t‐butyl α‐bromomethyl acrylate with triethyl phosphite followed by the selective hydrolysis of the phosphonate or t‐butyl ester groups with trimethylsilyl bromide and trifluoroacetic acid. The copolymerization of these monomers with 2‐hydroxyethylmethacrylate was investigated with photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as a photoinitiator. Quantum mechanical tools were also used to understand the mechanistic behavior of the polymerization reactions of these synthesized monomers. The propagation and chain‐transfer reactions were considered and rationalized. A strong effect of the monomer structure on the rate of polymerization was observed. The polymerization reactivities of the monomers increased with decreasing steric hindrance and/or increasing hydrogen‐bonding capacity because of the hydrolysis of the phosphonate and the t‐butyl ester groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2574–2583, 2005     

Synthesis and evaluation of new dental monomers with both phosphonic and carboxylic acid functional groups

Novel dental monomers containing both phosphonic and carboxylic acid functional groups were prepared. The monomers were based on t‐butyl α‐bromomethacrylate (t‐BuBMA) and synthesized in three steps: The reaction of o‐hydroxyaryl phosphonates [diethyl (2‐hydroxyphenyl) phosphonate, tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) diphosphonate and tetraethyl 5,5′‐(propane‐2,2‐diyl)bis(2‐hydroxy‐5,1‐ phenylene) diphosphonate] with t‐BuBMA, the hydrolysis of phosphonate groups to phosphonic acid using trimethyl silylbromide, and the hydrolysis of the t‐butyl groups to carboxylic acid with trifluoroacetic acid. The monomers were solids and soluble in water and ethanol. The structures of the monomers were determined by Fourier transform infrared (FTIR), ¹H, ¹³C, and ³¹P nuclear magnetic resonance (NMR) spectroscopy. The copolymerization behaviors of the synthesized monomers with glycerol dimethacrylate were first investigated in bulk using photodifferential scanning calorimetry at 40 °C with 2,2′‐dimethoxy‐2‐phenyl acetophenone as photoinitiator. Then, the solution copolymerization of the monomers with acrylamide in ethanol and water was studied, indicating that the synthesized monomers are incorporated into the copolymers. The acidic nature of the aqueous solutions of these monomers (pH values 1.72–1.87) is expected to give them etching properties important for dental applications. The interaction of the monomers with hydroxyapatite was investigated using ¹³C NMR and FTIR techniques. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1953–1965, 2009     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Synthesis and stability study of dental monomers containing methacrylamidoethyl phosphonic acids

Three new dental monomers containing methacrylamidoethyl phosphonic acids were synthesized. The structures of the synthesized monomers were determined with electrospray mass spectrometry (ESMS), Fourier transform infrared, and NMR. The hydrolytic stabilities of the synthesized monomers and a commercial monomer, 2‐methacryloyloxyethyl phosphoric acid (MEP; used as a control), were studied with flow injection (FI)/ESMS, ¹H NMR, and ³¹P NMR analysis of a CD₃OD/D₂O (4:1 v/v) solution of each monomer before and after storage at 60 °C for 2 months. The ¹H NMR and ³¹P NMR chemical shifts of the monomers 2‐methacrylamidoethylphosphonic acid ( I ) and N,N′‐[4,4′‐(propane‐2,2‐diyl)‐bis(phenoxy‐2‐hydroxypropyl)]‐bis(2‐methacrylamidoethylphosphonic acid) ( II ) showed little change after storage at 60 °C for 2 months, but those of MEP changed significantly. FI/ESMS also showed that MEP was nearly completely decomposed, whereas monomers I and II remained largely intact. MEP could react with H₂ZrF₆ to form ternary zirconium fluoride complexes that were partially soluble in methanol, but all the monomers containing phosphonic acids formed precipitates. This study demonstrates that ESMS is a more sensitive and effective method than NMR for studying the hydrolytic stability or degradation of dental monomers. The new monomers containing methacrylamidoethyl phosphonic acids have higher hydrolytic stability than methacrylate phosphate monomers and may be used in dental bonding agents and other dental materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 99–110, 2007     

Monomers for adhesive polymers. XV. Synthesis,photopolymerization, and adhesive properties of polymerizable β‐ketophosphonic acids

The novel polymerizable β‐ketophosphonic acids 4 , 8 , 10 , and 16 as well as the 9‐(methacryloyloxy)‐nonylphosphonic acid 20 were synthesized in four to eight steps. They were characterized by ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy and by high‐resolution mass spectra. The free‐radical polymerization of 4 , 8 , 10 , and 16 was carried out in a water/ethanol solution, using 2,2′‐azo(2‐methylpropionamidine)dihydrochloride as initiator. To evaluate the reactivity of the acidic monomers 4 , 8 , 10 , 16 , and 20 , their photopolymerization behavior was investigated by photodifferential scanning calorimeter. Copolymerizations with 2‐hydroxyethyl methacrylate, glycol dimethacrylate, and N,N′‐diethyl‐1,3‐bis‐(acrylamido)propane were studied. The homopolymerization of the corresponding β‐ketophosphonates and their copolymerization with hydroxyethyl methacrylate were also carried out. Self‐etch adhesives based on the β‐ketophosphonic acids 4 , 8 , 10 , and 16 were able to provide high shear bond strengths (SBSs) of dimethacrylate‐based composite to dentin and enamel. The β‐ketophosphonic acid 8 was also shown to exhibit significantly better adhesive properties than the corresponding phosphonic acid 20 . Indeed, the presence of the carbonyl moiety in the β‐position of the phosphonic acid group led to a strong improvement of the composite SBS to dentin and enamel. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3550–3563     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Synthesis and polymerization kinetics of acrylamide phosphonic acids and esters as new dentine adhesives

In restorative dentistry, acrylamide monomers bearing phosphonic acid moieties have proved to be useful species for the formulation of dental self‐etch adhesives since they provide enhanced adhesion to hydroxyapatite and are not subject to hydrolysis, thus potentially improving their adhesive durability. Previous studies have demonstrated that phosphonic acid acrylamides increase the rate of photopolymerization of diacrylamide monomers. To understand whether this rate acceleration is specific to the acrylamide function of the monomer, or due to the phosphonic acid group per se, or is applicable only with a crosslinking reaction, we have synthesized several acrylamide and methacrylate monomers bearing phosphonic acid or phosphonate moieties and studied their photopolymerization kinetics. The acrylamide phosphonic acid was found to accelerate the polymerization rate but similar monomers bearing a phosphonate ester group had a much smaller effect. A similar accelerating effect was observed when the phosphonic acid‐based monomers were copolymerized with a monofunctional acrylamide monomer, excluding the possibility that the rate acceleration might be related to the crosslinking process. This rate effect is also observed when a nonpolymerizable organic phosphonic acid is present in the polymerizing medium. We suggest that the increase of the medium polarity is responsible for this rate enhancement effect. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and photopolymerization of piperonylamine derivatives as a polymerizable cyclic acetals co‐initiator for light‐cured unfilled dental resins

The aim of this study was to synthesize and characterize N,N‐di(methacryly‐ethoxycarbonyl‐ethyl)‐N‐(1,3‐benzodioxole‐ 5‐methylene)(DMEBM) to replace both triethylene glycol dimethylacrylate(TEGDMA) as a dilute and the non‐polymerizable amine, which is added as a co‐initiator in dental resin mixtures. 2,2‐bis[4‐(2‐Hydroxy‐3‐methacryloxypropoxy) phenyl]‐propane (Bis‐GMA) and camphorquinone (CQ) were used as monomer and photoinitiator in these model dental resin systems, in contrast to ethyl 4‐dimethylaminobenzoate (EDMAB) which was usually used as a co‐initiator. DMEBM was synthesized via Michael‐Addition reaction and characterized using ¹H NMR spectroscopy. A mixture of Bis‐GMA/DMEBM/CQ was found to reach the double bond conversion of 67.5%, slightly higher than that of Bis‐GMA/TEGDMA/CQ/EDMAB (66.8%) and Bis‐GMA/TEGDMA/CQ/DMEBM (64.8%). In addition, the glass transition temperature of Bis‐GMA/TEGDMA/CQ/EDMAB (93.4°C) were higher than that of Bis‐GMA/TEGDMA/CQ/DMEBM (89.3 °C) and Bis‐GMA/DMEBM/CQ (80.4°C). The water sorption and solubility of Bis‐GMA/TEGDMA/CQ/DMEBM were higher than that of Bis‐GMA/TEGDMA/CQ/EDMAB and Bis‐GMA/DMEBM/CQ. However, the values were still within the range of the ISO 4049 standards. DMEBM could be used as a potential co‐initiator and diluent for dental composite. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Synthesis and photopolymerizations of first monomers with phosphonate and bisphosphonate or phosphonic and bisphosphonic acid functionalities for potential dental applications

The first monomers containing both phosphonate and bisphosphonate (M1) or phosphonic and bisphosphonic acid (M2) functionalities are synthesized, aiming to improve binding abilities of self-etching adhesive systems and composites: An amine having both phosphonate and bisphosphonate functionalities is prepared via Michael addition reaction between diethyl (6-aminohexyl)phosphonate and tetraethyl vinylidene bisphosphonate, its reaction with 2-isocyanatoethyl methacrylate gives M1 which is converted to M2 by selective dealkylation of the phosphonate/bisphosphonate ester groups. Their copolymerization with commercial dental monomers (bisphenol A glycidyl methacrylate, triethylene glycol dimethacrylate, and 2-hydroxyethyl methacrylate) investigated by photo-differential scanning calorimetry shows adequate photopolymerization rate and conversion. X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses of M2-treated hydroxyapatite particles show formation of stable M2-calcium salts. These monomers are assessed to be not toxic according to MTT standards by in vitro cytotoxicity studies with NIH 3T3, U2OS, and Saos-2 cells. All these properties make these monomers potential candidates as biocompatible components for dental adhesives and composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2739–2751     

High refractive index materials: A structural property comparison of sulfide‐ and sulfoxide‐containing polyamides

High‐refractive‐index polyamides (PAs) are developed by incorporation of sulfide‐ or sulfoxide linkages and chlorine substituents. The PAs are synthesized through the polycondensation of two novel diamine monomers, 2,2′‐sulfide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3a) and 2,2′‐sulfoxide‐bis(4‐chloro‐1‐(4‐aminophenoxy) phenyl ether (3b), with various aromatic diacids (a–e). The ortho‐sulfide or sulfoxide units, pendant chlorine groups, and flexible ether linkages in the diamine monomers endowed the obtained PAs with excellent solubilities in organic solvents. The resulting PAs showed high thermal stability, with 10% weight loss temperatures exceeding 415 °C under nitrogen and 399 °C in air atmosphere. The combination of chlorine substituents, sulfide or sulfoxide linkages, and ortho‐catenated structures provided polymers with high transparency along with high refractive index values of up to 1.7401 at 632.8 nm and low birefringences (<0.0075). The structure–property relationships of the analogous PAs containing sulfide or sulfoxide linkages were also studied in detail by comparing the results. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2867–2877     

Synthesis and antimicrobial activity of tris phosphonates

Syntheses of novel [{(3‐dialkoxy‐phosphoryl)‐(substituted‐phenyl‐methyl)‐2‐oxo‐2‐phenyl‐2,3‐dihydro‐2λ⁵–benzo [1,3,2] diazaphosphol‐1‐yl}‐(substituted‐phenyl)‐methyl]‐phosphonic acid diethyl/dimethyl esters ( 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j ) were conveniently accomplished by cyclocondensation of [(2‐{(dimethoxy‐phosphoryl)‐phenyl‐methyl)‐amino}‐phenyl amino)‐phenyl‐methyl]phosphonic acid diethyl/dimethyl esters ( 2a , 2b , 2c , 2d , 2e , 2f , 2g , 2h , 2i , 2j ) with phenyl phosphonic dichloride in dry toluene in the presence of triethylamine at 40°C. The title compounds were characterized by physicospectral techniques. All the synthesized compounds were found to possess antimicrobial properties. J. Heterocyclic Chem., 2011.     

Synthesis of novel copolymers obtained from acceptor/donor radical copolymerization of phosphonated allyl monomers and maleic anhydride

A series of four phosphonated‐bearing allyl monomers, that is, diethyl‐1‐allylphosphonate ( AP ), dimethyl‐1‐allyloxymethylphosphonate ( AOP ), 5‐ethyl‐5‐(allyloxymethyl)‐2‐oxo‐1,3,2‐dioxaphosphorinane ( AEDPH ), and 2‐benzyl‐5‐ethyl‐5‐(allyloxymethyl)‐2‐oxo‐1,3,2‐dioxaphosphorinane ( AEDPBn ) were synthesized. These monomers were then copolymerized by free radical polymerization in the presence of maleic anhydride, thus leading to alternated copolymers with phosphonate moieties. It was shown that both monomer conversion and reaction rate were dependent on the phosphonate moieties carried out by the allyl monomer: the bulkier the phosphonate group, the higher the polymerization rate. Thermogravimetric analysis of the copolymers revealed a high content of residue, also varying with the nature of the phosphonate moieties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Acrylate based anticorrosion films using novel bis‐phosphonic methacrylates

Two novel phosphonated methacrylate monomers were successfully synthesized and subsequently incorportated into adhesion/anticorrosive coatings. Specifically, they were propyl N,N‐tetramethyl‐bis(phosphonate)‐2‐hydroxyl‐bis(methylene) amine methylmethacrylate (MAC₃NP₂) and 2‐[2,2‐bis(diisopropoxyphosphoryl)ethoxy]‐methylmethacrylate, (MAC₃P₂). The phosphonic forms of each monomer were blended with ～85% w.w acrylates (tripropyleneglycol‐diacrylate and hexanediol‐diacrylate) and 6% w.w of the photo sensitive initiator Darocur®. Along with a monophosphonic monomer synthesized in a previous publication (MAC₃P), they were polymerized on Q‐panels under ultraviolet light, and then subject to the salt spray test (ca. 0.5 mol/L NaCl at 35 °C) for a duration of up to 50 days. The results indicate that acrylate blends with low concentration of the bisphosphonic compound MAC₃P₂ have excellent resistance to corrosion, thus excellent adhesive properties. Importantly, these coatings were formed without the use of a hydrophobic polymer matrix or solvents. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7972–7984, 2008