Synthesis and characterization of fluorescence end‐labeled polystyrene via reversible addition‐fragmentation chain transfer (RAFT) polymerization

Fluorescence end‐labeled polystyrene (PS) with heteroaromatic carbazole or indole group were prepared conveniently via reversible addition‐fragmentation chain transfer (RAFT) polymerization using dithiocarbamates, ethyl 2‐(9H‐carbazole‐9‐carbonothioylthio)propanoate (ECCP) and benzyl 2‐phenyl‐1H‐indole‐1‐carbodithioate (BPIC) as RAFT agents. The end functionality of obtained PS with different molecular weights was high. The steady‐state and the time‐resolved fluorescence techniques had been used to study the fluorescence behaviors of obtained end‐labeled PS. The fluorescence of dithiocarbamates resulting PS in solid powder cannot be monitored; however, they exhibited structured absorptions and emissions in solvent DMF and the fluorescence lifetimes of PS had no obvious change with molecular weights increasing. These observations suggested that the polymer chains were possibly stretched adequately in DMF, that is, the fluorescence end group was exposed into solvent molecules and little quenching of excited state occurred upon incorporation into polymer chain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6198–6205, 2008     

Water‐soluble,thermoresponsive, hyperbranched copolymers based on PEG‐methacrylates: Synthesis,characterization, and LCST behavior

A series of water‐soluble thermoresponsive hyperbranched copoly(oligoethylene glycol)s were synthesized by copolymerization of di(ethylene glycol) methacrylate (DEG‐MA) and oligo(ethylene glycol) methacrylate (OEG‐MA, M_w = 475 g/mol), with ethylene glycol dimethacrylate (EGD‐MA) used as the crosslinker, via reversible addition fragmentation chain transfer polymerization. Polymers were characterized by size exclusion chromatography and nuclear magnetic resonance analyses. According to the monomer composition, that is, the ratio of OEG‐MA: DEG‐MA: EGD‐MA, the lower critical solution temperature (LCST) could be tuned from 25 °C to 90 °C. The thermoresponsive properties of these hyperbranched copolymers were studied carefully and compared with their linear analogs. It was found that molecular architecture influences thermoresponsive behavior, with a decrease of around 5–10 °C in the LCST of the hyperbranched polymers compared with the LCST of linear chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2783–2792, 2010     

Synthesis of liquid‐filled nanocapsules via the miniemulsion technique

This study describes the synthesis of well‐defined nanocapsules via the miniemulsion technique. Pentaerythritol tetrakis(3‐mercaptopropionate) (TetraThiol) or 1,6‐hexanediol di(endo, exo‐norborn‐2‐ene‐5‐carboxylate) (DiNorbornene) is used as the oil phase. TetraThiol is encapsulated via the miniemulsion technique without polymerization, as this monomer would simultaneously act as a chain‐transfer agent, and DiNorbornene is encapsulated via miniemulsion polymerization of styrene. Various styrene‐maleic anhydride (PSMA) copolymers and poly(styrene‐maleic anhydride)‐block‐polystyrene (PSMA‐b‐PS) block copolymers were used as surfactant for the synthesis of well‐defined nanocapsules with TetraThiol as the core material. The nanocapsules had a diameter of 150–350 nm and the particle size distribution was narrow. The use of PSMA‐b‐PS block copolymers as surfactant in combination with post‐addition of formaldehyde provided improved stability to the nanocapsules. DiNorbornene was encapsulated via miniemulsion polymerization of styrene, and a stable latex with a bimodal particle size distribution was obtained. The distribution of small particles had a size of 60 nm and the distribution of large particles had a size of 150 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of ω‐sulfonated polystyrene via reversible addition fragmentation chain transfer polymerization and postpolymerization modification

The synthesis of chain‐end sulfonated polystyrene [PS (ω‐sulfonated PS)] by reversible addition fragmentation chain transfer (RAFT) polymerization followed by postpolymerization modification was investigated by two methods. In the first method, the polymer was converted to a thiol‐terminated polymer by aminolysis. This polymer was then sulfonated by oxidation of the thiol end‐group with m‐chloroperoxybenzoic acid (m‐CPBA) to produce a sulfonic acid end‐group. In the second method, the RAFT‐polymerized polymer was directly sulfonated by oxidation with m‐CPBA. After purification by column chromatography, ω‐sulfonated PS was obtained by both methods with greater than 95% end‐group functionality as measured by titration. The sulfonic acid end‐group could be neutralized with various ammonium or imidazolium counter ions through acid–base or ionic metathesis reactions. The effect of the ionic end‐groups on the glass transition temperature of the PS was found to be consistent with what is known for PS ionomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of water‐soluble gold nanoparticles stabilized by comb‐shaped copolymers

The water‐soluble gold nanoparticles stabilized by well‐defined comb‐shaped copolymers have been synthesized successfully. The hybrid nanoparticles consist of gold core and poly[poly(ethylene oxide) methyl ether acrylate]‐block‐poly(N‐isopropylacrylamide) [P(A‐MPEO)‐block‐PNIPAM] shell. The water‐soluble comb‐shaped copolymers, P(A‐MPEO)‐block‐PNIPAM with PNIPAM as a handle, were successfully synthesized via a macromonomer technique using reversible addition fragmentation chain transfer (RAFT) polymerization method. The terminal dithioester group of the comb‐shaped copolymer was reduced to a thiol end group forming SH‐terminated copolymers, P(A‐MPEO)‐block‐PNIPAM‐SH. Successively they were used to stabilize gold nanoparticles by the “grafting‐to” approach. The hybrid nanoparticles were characterized by TEM, UV–vis, and HRTEM. Because of the thermosensitive property of PNIPAM in aqueous solution, the comblike copolymer‐tethered gold nanoparticles show a sharp and reversible phase transition at 30 °C in aqueous solution, which was determined by microdifferential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 341–352, 2008     

Preparation of glycopolymer‐substituted gold nanoparticles and their molecular recognition

Glycopolymer‐substituted gold nanoparticles were prepared via living radical polymerization with a reversible addition‐fragmentation chain transfer (RAFT) reagent. Polyacrylamide derivatives with α‐mannose (α‐Man) and N‐acetyl‐β‐glucosamine (β‐GlcNAc) were synthesized and hydrogenated to obtain thiol‐terminated polymer. The thiol‐terminated glycopolymers were mixed with gold nanoparticles to yield the polymer substituted gold nanoparticles with various diameters, which aggregated on addition of saccharide‐recognition proteins (lectins). The aggregation properties were analyzed using transmission electron microscopy and UV spectra. Molecular recognition was studied with E. coli, which induced aggregation of the nanoparticles at the cell periphery. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1412–1421, 2009     

Synthesis of thermo‐responsive 4‐arm star‐shaped porphyrin‐centered poly(N,N‐diethylacrylamide) via reversible addition‐fragmentation chain transfer radical polymerization

Tetrafunctional porphyrins‐containing trithiocarbonate groups were synthesized by an ordinary esterification method. This tetrafunctional porphyrin (TPP‐CTA) could be used as a chain transfer agent in a controlled reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to prepare well‐defined 4‐arm star‐shaped polymers. N,N‐Diethylacrylamide was polymerized using TPP‐CTA in 1,4‐dioxane. Poly(N,N‐diethylacrylamide) (PDEA) is known to be a thermo‐responsive polymer, and exhibits a lower critical solution temperature (LCST) in water. The star‐shaped PDEA polymer (TPP‐PDEA) was therefore also thermo‐responsive, as expected. The LCST of this polymer depended on its concentration in water, as confirmed by turbidity, dynamic light scattering (DLS), static light scattering (SLS), and ¹H NMR measurements. The porphyrin cores were compartmentalized in PDEA shells in aqueous media. Below the LCST, the fluorescence intensity of TPP‐PDEA was about six times larger than that of a water‐soluble low molecular weight porphyrin compound (TSPP), whose fluorescence intensity was independent of temperature. Above the LCST, the fluorescence intensity of TPP‐PDEA decreased, while the intensity was about three times higher than that of TSPP. These observations suggested that interpolymer aggregation occurred due to the hydrophobic interactions of the dehydrated PDEA arm chains above the LCST, with self‐quenching of the porphyrin moieties arising from these interactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

New associative EHEC‐g‐PAam copolymers: Their syntheses,characterization, and rheological behavior

The syntheses and rheological behavior of ethyl hydroxyethyl cellulose (EHEC)‐based graft‐copolymers were studied. Copolymers were prepared by grafting EHEC with acrylamide (Aam) via reversible addition fragmentation chain transfer (RAFT) polymerization. Hydroxyl groups of EHEC were esterified with a carboxylic acid functional chain transfer agent (CTA) to prepare EHEC‐macroCTAs with different degrees of substitution. EHEC‐macroCTAs were characterized by ATR‐FTIR, ¹³C NMR, and SEC, and elemental analysis was used to quantify the degree of CTA substitution. EHEC‐macroCTAs with different degrees of substitution were copolymerized with acrylamide by “grafting from” technique. Formation of new cellulose‐based copolymers was comprehensively confirmed by ¹H NMR, ATR‐FTIR, and SEC measurements. Further, the associations of EHEC‐g‐PAam copolymers in water were studied at various concentrations and temperatures by means of UV–vis spectroscopy, fluorescence spectroscopy, and rheological measurements. The results indicate that copolymers have both intra and intermolecular association in water depending on the amount of grafts. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1869–1879, 2009     

Synthesis and characterization of block copolymers containing poly(di(ethylene glycol) 2‐ethylhexyl ether acrylate) by reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has emerged as one of the important living radical polymerization techniques. Herein, we report the polymerization of di(ethylene glycol) 2‐ethylhexyl ether acrylate (DEHEA), a commercially‐available monomer consisting of an amphiphilic side chain, via RAFT by using bis(2‐propionic acid) trithiocarbonate as the chain transfer agent (CTA) and AIBN as the radical initiator, at 70 °C. The kinetics of DEHEA polymerization was also evaluated. Synthesis of well‐defined ABA triblock copolymers consisting of poly(tert‐butyl acrylate) (PtBA) or poly(octadecyl acrylate) (PODA) middle blocks were prepared from a PDEHEA macroCTA. By starting from a PtBA macroCTA, a BAB triblock copolymer with PDEHEA as the middle block was also readily prepared. These amphiphilic block copolymers with PDEHEA segments bearing unique amphiphilic side chains could potentially be used as the precursor components for construction of self‐assembled nanostructures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5420–5430, 2007     

NMR investigation of effect of dissolved salts on the thermoresponsive behavior of oligo(ethylene glycol)‐methacrylate‐based polymers

The synthesis of thermo‐ and ionic‐responsive copolymers based on polyethylene glycol methyl ether methacrylate (OEGMA) and 2,2,2‐trifluoroethyl acrylate (TFEA) via reversible addition‐fragmentation chain transfer polymerization is described. Reactivity ratios for the copolymerization of OEGMA and TFEA are r_OEGMA = 2.46 and r_TFEA = 0.22, indicating that OEGMA is incorporated more rapidly than TFEA monomers. The copolymers are thermosensitive and exhibit volume phase transitions (lower critical solution behavior) at temperature, which depend on copolymer composition and the presence of added salts in the aqueous solutions. It was found that the copolymers exhibited LCST transitions at temperatures below 353 K only in salt solutions. ¹H NMR measurements indicated that motion of the protons located in and near the hydrophobic main chain are more sensitive to temperature than protons in the hydrophilic OEGMA side chains. The hydrophilic side chains remain largely hydrated; however, the presence of two distinct conformations of the terminal groups of the side chains was confirmed. The influence of OEGMA side chain length, copolymer composition, and salt type on aggregation behavior and dynamics was examined in detail. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2375–2385     

End group transformations of RAFT‐generated polymers with bismaleimides: Functional telechelics and modular block copolymers

End group activation of polymers prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization was accomplished by conversion of thiocarbonylthio end groups to thiols and subsequent reaction with excess of a bismaleimide. Poly(N‐isopropylacrylamide) (PNIPAM) was prepared by RAFT, and subsequent aminolysis led to sulfhydryl‐terminated polymers that reacted with an excess of 1,8‐bismaleimidodiethyleneglycol to yield maleimido‐terminated macromolecules. The maleimido end groups allowed near‐quantitative coupling with model low molecular weight thiols or dienes by Michael addition or Diels‐Alder reactions, respectively. Reaction of maleimide‐activated PNIPAM with another thiol‐terminated polymer proved an efficient means of preparing block copolymers by a modular coupling approach. Successful end group functionalization of the well‐defined polymers was confirmed by combination of UV–vis, FTIR, and NMR spectroscopy and gel permeation chromatography. The general strategy proved to be versatile for the preparation of functional telechelics and modular block copolymers from RAFT‐generated (co)polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5093–5100, 2008     

RAFT‐based synthesis and the gelation property of telechelic polymers that can immobilize biomacromolecules

Telechelic polymers, macromolecules having two reactive end groups, can serve as building blocks for constructing polymers or polymeric materials that have complex architectures. Among the telechelic polymers, polymers bearing hydroxyl groups at two terminals have been used as components for preparation of functional materials. In the present study, RAFT polymerization of both N‐acryloylmorphorin and N‐succinimidyl acrylate by using a newly synthesized dithiobenzoate‐type chain transfer agent bearing hydroxyl groups at both terminals (HECPHD) was reported. After the acryloylation of the hydroxyl terminals of the obtained polymer, gelation was observed. Furthermore, the polymer could react with a protein via the conjugation of the succinimidyl esters‐containing polymers to the amino groups present on the protein surface. The results show that activated esters‐bearing polymers with hydroxyl groups at both terminals can be used as building blocks for constructing polymeric materials for an immobilization of biomacromolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1356–1365     

Microwave‐Assisted Synthesis of Glycopolymer‐Functionalized Silver Nanoclusters: Combining the Bioactivity of Sugar with the Fluorescence and Cytotoxicity of Silver

Copolymers of 2‐(methacrylamido)glucopyranose (MAG) and methacrylic acid (MAA) are synthesized by RAFT polymerization and then used as templates to prepare glycopolymer‐functionalized Ag nanoclusters (Gly‐Ag NCs) through microwave irradiation. Polymers and the resulting nanoclusters are characterized by NMR, GPC, UV‐Vis, SEM, TEM, AAS and fluorescence spectroscopy. The bio‐activity of the fluorescent Gly‐Ag NCs are further examined using GLUT‐1 over‐expressing cancer cells K562. Gly‐Ag NCs show efficient binding ability toward K562 cells and inhibit the cell viability in a dose dependent manner (IC50 = 0.65 μg mL^–1), indicating their potential biological applications for both cancer imaging and targeted cancer therapy.

     

Synthesis of well‐defined side chain fullerene polymers and study of their self‐aggregation behaviors

Monoalkynyl‐functionalized fullerene was precisely synthesized starting with pristine fullerene (C₆₀) and characterized by multiple techniques. Methyl methacrylate and 6‐azido hexyl methacrylate were then randomly copolymerized via reversible addition fragmentation chain transfer polymerization to build polymer backbones with well‐controlled molecular weights and copolymer compositions. Finally, these two moieties were covalently assembled into a series of well‐defined side chain fullerene polymers (SFPs) via the copper‐mediated click reaction which was verified by Fourier transform infrared spectroscopy and ¹H NMR. The fullerene loadings of the resultant polymers were estimated by thermogravimetric analysis and UV–vis spectroscopy, demonstrating consistent and high conversions in most of the samples. The morphology studies of the SFPs were performed both in solution and on solid substrates. Very intriguing self‐aggregation behaviors were detected by both gel permeation chromatography and dynamic light scattering analyses. Furthermore, the scanning electron microscopic images of these polymers showed the formation of various supramolecular nanoparticle assemblies and crystalline‐like clusters depending on the fullerene contents and polymer chain lengths. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3572–3582     

Xanthates designed for the preparation of N‐Vinyl pyrrolidone‐based linear and star architectures via RAFT polymerization

Novel xanthate RAFT agents, RAFT1‐5, designed for the preparation of a range of novel N‐vinyl pyrrolidone‐based polymeric materials with linear and star architectures via RAFT polymerization are reported. Ethyl pyrrolidone moiety was included in the structures of the xanthates as a part of R (RAFT1‐3) or Z group (RAFT4) to evaluate their effect on the polymerization and to impart homogeneity in the resulting products. The xanthates were designed to fragment to give primary (RAFT1), secondary (RAFT2 and 4), and tertiary radicals (RAFT 3) allowing evaluation of their effect on polymerization. RAFT5 was designed to produce polymeric materials with four‐arm architectures. RAFT1 showed comparable characteristics as conventional radical polymerization. RAFT2 and RAFT4 exhibited living/controlled polymerizations, owing to the combination of stable secondary radical species and incorporation of ethyl pyrrolidone moiety as the R and Z group, respectively. RAFT2 and RAFT5 gave first examples of random copolymers of NVP and VAc with linear and four‐arm star architectures, all exhibiting monomodal distributions and narrow dispersity. The four‐arm PVAc star was used as a macroCTA to synthesize amphiphilic four‐arm star PVAc‐block‐PNVP. The TEM investigation showed the formation of spherical micelles with an average diameter of about 60 nm. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 775–786     

Synthesis and magnetic properties of comb‐like copolymeric complexes based on thiazole ring and ionic liquid

Two comb‐like copolymers (BIMT and PMB) composed of N‐2‐thiazolylmethacrylamide (NTMA) and 2‐(1‐butylimidazolium‐3‐yl) ethyl methacrylate tetrafluoroborate (BIMA) were prepared by free radical polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The conversion of the monomers to copolymer has been confirmed by FTIR spectra and ¹H NMR spectra. The metal (Ni²⁺, Nd³⁺) complexes of these two copolymers were prepared, and the magnetic behaviors of the complexes were studied. The coordinated complexes display three possible chelating structures, which lie on the nitrogen donor and oxygen donor ligands and the kinds of the metal ions. The bimetallic complexes (BIMT‐Nd‐Ni and PMB‐Nd‐Ni) were synthesized by using the different coordination sites of the polymers. The magnetic properties of the complexes show that different structures arising from the different preparations, the kinds and the contents of metal ions, and the state of the complexes can infect the exchange interaction between the metal ions and induce various magnetic phenomena. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5123–5132, 2008     

Synthesis of enantiopure homo and copolymers by raft polymerization and investigation of their enantioselective lipase‐catalyzed esterification

Homo and copolymers were synthesized from enantionpure (R)‐ and (S)‐1‐(4‐vinylphenyl)ethanol by reversible addition‐fragmentation chain transfer polymerization. The polymerization conditions were optimized resulting in dioxane as the preferred reaction solvent. First‐order polymerization kinetics and well‐defined enantiopure homopolymers with low dispersities were obtained. In agreement with their enantiomeric composition, the (R) and (S)‐polymers gave opposite optical rotation of light. Polymer analogous esterification of the chiral hydroxy groups catalyzed by enantioselective Candida antarctica Lipase B was strongly (R)‐selective. Esterification on the homopolymer and copolymers could be achieved to a maximum of around 50 %. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Tuning the sugar‐response of boronic acid block copolymers

A detailed study of the pH‐ and sugar‐responsive behavior of poly(3‐acrylamidophenylboronic acid pinacol ester)‐b‐poly(N,N‐dimethylacrylamide) (PAPBAE‐b‐PDMA) block copolymers is presented. Reversible addition‐fragmentation chain transfer (RAFT) polymerization of the pinacol ester of 3‐acrylamidophenylboronic acid resulted in homopolymers with molecular weights between 12,000 and 37,000 g/mol. The resulting homopolymers were employed as macro‐chain transfer agents during the polymerization of N,N‐dimethylacrylamide (DMA). Successful chain extension and removal of the pinacol protecting groups to yield poly(3‐acrylamidophenylboronic acid)‐b‐PDMA (PAPBA‐b‐PDMA) with free boronic acid moieties resulted in pH‐ and sugar‐responsive block copolymers that were subsequently investigated for their behavior in aqueous solution. The PAPBA‐b‐PDMA block copolymers were capable of solution self‐assembly due to the PAPBA block being water‐insoluble below its pK_a. The resulting aggregates were demonstrated to solubilize and release model hydrophobic compounds, as demonstrated by fluorescence studies. Dissociation of the aggregates was induced by raising the pH above the pK_a of the boronic acid residues or by adding sugars capable of forming boronate esters. Aggregate size, dissociation kinetics, and the effect of various sugars were considered. The critical sugar concentration needed to induce aggregate dissociation was tuned by incorporation of hydrophilic DMA units within the PAPBA responsive segment to yield PDMA‐b‐poly(3‐acrylamidophenylboronic acid‐co‐DMA) block copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012