One‐Reactant Photografting of ATRP Initiators for Surface‐Initiated Polymerization

Self‐initiated photografting polymerization is used to couple the polymerizable initiator monomer 2‐(2‐chloropropanoyloxy)ethyl acrylate to a range of polymeric substrates. The technique requires only UV light to couple the initiator to surfaces. The initiator surface density can be varied by inclusion of a diluent monomer or via selection of initiator and irradiation parameters. The functionality of the initiator surface is demonstrated by subsequent surface‐initiated atom transfer radical polymerization. Surfaces are characterized by x‐ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM), and UV‐induced changes to the initiator are assessed by ¹H NMR and gel permeation chromatography (GPC). This is the first time this one‐reactant one‐step technique has been demonstrated for creating an initiator surface of variable density.

     

Surface initiated‐atom transfer radical polymerization of a sugar methacrylate on gold nanoparticles

For development of surface‐functionalized gold nanoparticles (GNPs) as cellular probes, we report herein the synthesis of glycoconjugates of GNPs with cyclic sugar methacrylate, 2‐lactobionamidoethyl methacrylate (LAMA). The strategy involves the attachment of an initiator on the nanoparticle surface followed by surface initiated‐atom transfer radical polymerization (SI‐ATRP) of LAMA. SI‐ATRP of LAMA was achieved by reacting a mixture of copper (I) bromide (CuBr), 2,2′‐bipyridine (bpy) and initiator‐bound GNPs in methanol at 20 °C for 12 h. The resultant GNP glycoconjugates were characterized using Fourier‐transform infrared (FT‐IR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The FT‐IR spectra of GNP glycoconjugates show IR peaks characteristic of LAMA demonstrating the formation of a LAMA layer on the GNPs' surface. The XPS spectrum of glycoconjugates shows signals due to the presence of carbon (C1s, 288 eV) and oxygen (O1s, 536 eV) along with gold (Au 4f, 100 eV; Au 4p, 743 eV). The increase in diameter of GNPs from 13 to 25 nm measured by SEM further confirms the presence of a LAMA layer on the surface of the GNPs. Considering the biological importance of glycoconjugates, such as cell recognition, cell adhesion and cell growth regulation, the method described herein would be beneficial in many areas such as pathogen detection and biosensors. Copyright © 2008 John Wiley & Sons, Ltd.     

Fabrication of Chemically Tethered Binary Polymer‐Brush Pattern through Two‐Step Surface‐Initiated Atomic‐Transfer Radical Polymerization

Summary: The communication provides a novel and alternative route to generate chemically tethered binary polymer‐brush pattern through two‐step surface‐initiated atomic‐transfer radical polymerization (SI‐ATRP). Polymer brush‐1 was prepared by SI‐ATRP, passivated by a reaction with NaN₃, and etched with UV irradiation through a transmission electron microscopy grid to create exposed sites for the subsequently attached initiator on which polymer brush‐2 was grown.

Schematic representation of the resultant binary polymer brush patterns.     

Preparation of polymer‐grafted carbon black nanoparticles by surface‐initiated atom transfer radical polymerization

Pristine carbon black was oxidized with nitric acid to produce carboxyl group, and then the carboxyl group was consecutively treated with thionyl chloride and glycol to introduce hydroxyl group. The hydroxyl group on the carbon black surface was reacted with 2‐bromo‐2‐methylpropionyl bromide to anchor atom transfer radical polymerization (ATRP) initiator. The ATRP initiator on carbon black surface was verified by TGA, FTIR, EDS, and elemental analysis. Then, poly (methyl methacrylate) and polystyrene chains were respectively, grown from carbon black surface by surface‐initiated atom transfer radical polymerization (SI‐ATRP) using CuCl/2,2‐dipyridyl (bpy) as the catalyst/ligand combination at 110 °C in anisole. ¹H NMR, TGA, TEM, AFM, DSC, and DLS were used to systemically characterize the polymer‐grafted carbon black nanoparticles. Dispersion experiments showed that the grafted carbon black nanoparticles had good solubilities in organic solvents such as THF, chloroform, dichloromethane, DMF, etc. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3451–3459, 2007     

Immobilization of silver nanoparticles into POEGMA polymer brushes as SERS‐active substrates

Surface‐enhanced Raman scattering (SERS) has attracted a great deal of interest during the past four decades and emerged as an ultrasensitive optical technique for chemical and biomedical analysis. It is widely accepted that the facile fabrication of SERS substrates with high activity and good reproducibility is of crucial importance for their applications. Herein, we report on a fast and robust method for the synthesis and immobilization of silver nanoparticles (AgNPs) into poly(oligo(ethylene glycol) methacrylate) (POEGMA) brushes under mild conditions without using any reducing agents. POEGMA brushes of different chain lengths were synthesized directly on silicon wafers by surface‐initiated atom transfer radical polymerization with various reaction time. X‐ray photoelectron spectroscopy and field emission scanning electron microscope measurements indicated that the AgNPs were firmly and homogeneously embedded into POEGMA brushes. The resulting POEGMA–AgNP hybrid films were employed as SERS substrates for the detection of 4‐aminothiophenol, giving rise to an enhancement factor of up to 1.9 × 10⁶. The influence of the POEGMA's chain length on SERS performance was also investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Kinetic studies of surface‐initiated atom transfer radical polymerization in the synthesis of magnetic fluids

We present results from kinetic studies on the surface‐initiated atom transfer radical polymerization in the preparation of polymer brush‐coated magnetic particles from a heterogeneous system. It is shown that a controlled reaction behavior and a reproducible surface functionalization with end‐tethered polymers are achieved, although the reaction advances gradually from a biphasic solid–liquid mixture to a stable colloidal dispersion of the nanoobjects. Although the initiator‐functional magnetite nanoparticles initially form a precipitate, the formation of a polymer layer on the particle surface in the course of the reaction contributes to a sterical stabilization in dispersion. We thoroughly investigated the development of the initial heterogeneous system with time and in various concentration regimes by simultaneously monitoring the monomer conversion, molar mass, the hydrodynamic diameter of the nanoobjects, and the magnetite content of the dispersions at different reaction times. The results indicate first‐order chain growth kinetics with respect to the monomer and narrow molar mass distributions, demonstrating good control on the particle architecture. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Surface functionalization of multi‐walled carbon nanotubes through surface‐initiated atom transfer radical polymerization of glycidyl methacrylate

Herein, we report the fabrication of glycidyl methacrylate (GMA) polymeric conjugates of shortened multi‐walled carbon nanotubes (sMWCNT). The synthesis method involves the attachment of initiator on the surface of nanotubes followed by surface initiated atom transfer radical polymerization (SI‐ATRP) of GMA from the initiator‐bound sMWCNT surface. This is achieved by the procedure consisting of three important steps: introduction of amino groups onto the sMWCNT and attachment of polymerization initiator, 2‐bromo‐2‐methylpropinonyl bromide, and polymerization of GMA. The structure and properties of the resultant polymeric conjugates were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM) and SEM. The FT‐IR analysis of polymeric conjugates shows infrared (IR) peaks characteristic of GMA. AFM, TEM and SEM images clearly show the formation of poly(glycidyl methacrylate)(PGMA) polymer on sMWCNT surface. Copyright © 2009 John Wiley & Sons, Ltd.     

PNIPAM‐b‐(PEA‐g‐PDMAEA) double‐hydrophilic graft copolymer: Synthesis and its application for preparation of gold nanoparticles in aqueous media

A series of well‐defined double‐hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐(dimethylamino)ethyl acrylate) (PDMAEA) side chains, were synthesized by the combination of single‐electron‐transfer living radical polymerization (SET‐LRP) and atom‐transfer radical polymerization (ATRP). PNIPAM‐b‐PEA backbone was first prepared by sequential SET‐LRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system followed by the transformation into the macroinitiator by treating the pendant hydroxyls with 2‐chloropropionyl chloride. The final graft copolymers with narrow molecular weight distributions were synthesized by ATRP of 2‐(dimethylamino)ethyl acrylate initiated by the macroinitiator at 40 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system via the grafting‐from strategy. These copolymers were employed to prepare stable colloidal gold nanoparticles with controlled size in aqueous solution without any external reducing agent. The morphology and size of the nanoparticles were affected by the length of PDMAEA side chains, pH value, and the feed ratio of the graft copolymer to HAuCl₄. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1811–1824, 2009     

Tailor‐made hybrid nanostructure of poly(ethyl acrylate)/clay by surface‐initiated atom transfer radical polymerization

Hybrid nanoarchitecture of tailor‐made Poly(ethyl acrylate)/clay was prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP), by tethering ATRP initiator on active hydroxyl group, present in surface as well as in the organic modifier of the clay used. Extensive exfoliation was facilitated by using these initiator modified clay platelets. Poly(ethyl acrylate) chains with controlled polymerization and narrow polydispersities were forced to be grown from within the clay gallery (intergallery) as well as from the outer surface (extragallery) of the clay platelets. The polymer chains attached onto clay surfaces might have the potential to provide the composites with enhanced compatibility in blends with common polymers. Attachment of the initiator on clay platelets was confirmed by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), elemental analysis, Wide‐angle X‐ray diffraction (WAXD), and microscopic analysis. Finally, end group analysis (by Matrix‐Assisted Laser Desorption Ionization Mass Spectrometry, and chain extension experiment) of the cleaved polymer and morphological study (by WAXD, Transmission Electron Microscopy), performed on the polymer grafted clays examined the effect of grafting on the efficiency of polymerization and the degree of dispersion of clay tactoids in polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5014–5027, 2008     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via surface‐initiated ATRP and their surface properties: The effects of polymerization conditions

A series of superhydrophobic poly(methacryloxypropyltrimethoxysilane, MPTS‐b‐2,‐2,3,3,4,4,4‐heptafluorobutyl methacrylate, HFBMA)‐grafted silica hybrid nanoparticles (SiO₂/PMPTS‐b‐PHFBMA) were prepared by two‐step surface‐initiated atom transfer radical polymerization (SI‐ATRP). Under the adopted polymerization conditions in our previous work, the superhydrophobic property was found to depend on the SI‐ATRP conditions of HFBMA. As a series of work, in this present study, the effects of polymerization conditions, such as the initiator concentration, the molar ratio of monomer and initiator, and the polymerization temperature on the SI‐ATRP kinetics and the interrelation between the kinetics and the surface properties of the nanoparticles were investigated. The results showed that the SI‐ATRP of HFBMA was well controlled. The results also showed that both the surface microphase separation and roughness of the hybrid nanoparticles could be strengthened with the increase of the molecular weight of polymer‐grafted silica hybrid nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Tuning the low critical solution temperature of polymer brushes grafted on single‐walled carbon nanotubes and temperature dependent loading and release properties

A nondestructive method was developed for grafting and retrieving polymer brushes from single‐walled carbon nanotubes (SWCNT)s based on mussel‐inspired chemistry. Thermo‐responsive polymer brushes were grafted on SWCNTs by coating the tubes with polydopamine as a reactive underlayer and sequential surface‐initiated atom transfer radical polymerization of oligo(ethylene glycol) methacrylate (OEGMA, M_n = 475) and 2‐(2'‐methoxyethoxy)ethyl methacrylate (MEO2MA). Copolymer brushes were retrieved from the SWCNTs using 1 M NaOH to destroy the crosslinked polydopamine coating, and after that, the pristine properties of the SWCNTs were preserved. The low critical solution temperature (LCST) and molecular weight of the copolymer were measured using a nephelometer and gel permeation chromatograph, respectively. The loading and release behavior of Rhodamine 6G on responsive polymer‐grafted SWCNTs demonstrates that the copolymer brushes confer the SWCNTs an LCST dependence. This method can accurately confirm the molecular weights and polydispersity of stimuli‐responsive polymers grafted on any other nanoparticles and predict their controlled release behavior. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1807–1814     

Well‐defined poly(oxazoline)‐b‐poly(acrylate) amphiphilic copolymers: From synthesis by polymer–polymer coupling to self‐organization in water

In this contribution, we report on the self‐assembly in water of original amphiphilic poly(2‐methyl‐2‐oxazoline)‐b‐poly(tert‐butyl acrylate) copolymers, synthesized by copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction. For such purpose, (poly(2‐methyl‐2‐oxazoline)) and (poly(tert‐butyl acrylate)) are first prepared by cationic ring‐opening polymerization and atom transfer radical polymerization, respectively. Well‐defined polymeric building blocks, ω‐N₃‐P(t‐BA) and α‐alkyne‐P(MOx), bearing reactive chain end groups, are accurately characterized by matrix‐assisted laser desorption ionization time‐of‐flight spectroscopy. Then, P(MOx)_n‐b‐P(t‐BA)_m are achieved by polymer–polymer coupling and are fully characterized by diffusion‐ordered NMR spectroscopy and size exclusion chromatography, demonstrating the obtaining of pure amphiphilic copolymers. Consequently, the latter lead to the formation in water of well‐defined monodisperse spherical micelles (R_H = 40–60 nm), which are studied by fluorescence spectroscopy, static light scattering, atomic force microscope, and transmission electronic microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Novel superhydrophobic silica/poly(siloxane‐fluoroacrylate) hybrid nanoparticles prepared via two‐step surface‐initiated ATRP: Synthesis,characterization, and wettability

Poly(siloxane‐fluoroacrylate)‐grafted silica hybrid nanoparticles were prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP). The silica nanoparticles with α‐bromo‐ester initiator group for copper‐mediated ATRP were prepared by the self‐assembled monolayers of (3‐aminopropyl)triethoxysilane and 2‐bromoisobutyrate bromide. Well‐defined diblock copolymer brushes consisting of poly(methacryloxypropyltrimethoxysilane) and poly(2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) blocks were obtained by using initial homopolymer brushes as the macroinitiators for the SI‐ATRP of the second monomer. Chemical compositions and structures of the nanoparticles were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Surface properties and morphology of the nanoparticles were investigated with X‐ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, and water contact angle measurement. It is revealed that the surfaces of the nanocomposites are rough at the microscale and nanoscale. The formation reason of the superhydrophobic surfaces was also discussed in this work. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Hydrophilic Modification of Microporous Polysulfone Membrane via Surface‐Initiated Atom Transfer Radical Polymerization and Hydrolysis of Poly(glycidylmethacrylate)

Poly(glycidylmethacrylate) (PGMA) brushes were grafted from chloromethylated polysulfone (CMPSF) membrane surface by surface‐initiated atom transfer radical polymerization (SI‐ATRP), and the grafting was followed by hydrolysis of epoxy groups in the grafting chains to improve the membrane's hydrophilic property. Fourier transform infrared spectroscopy (FT‐IR) and X‐ray photoelectron spectroscopy (XPS) measurements confirmed the successful grafting and hydrolysis of PGMA. The grafting degree of the monomer, measured by periodic acid titration and gravimetric analysis, increased linearly with the polymerization time, while the static water contact angle of the membrane grafted with PGMA or hydrolyzed PGMA linearly decreased. In comparison with the PGMA‐grafted membranes, the hydrolyzed PGMA‐grafted membranes possess stronger hydrophilicity as indicated by their contact angle and hydration capacity, and as a result they have an improved antifouling property. Therefore, the control of the hydrophilicity of PSF membrane could be realized through adjusting the polymerization time and transforming the functional groups in the grafting chain.     

Preparation of well-defined polystyrene/silica hybrid nanoparticles by ATRP

Immobilization of the atom transfer radical polymerization (ATRP) macroinitiators at the silica nanoparticle surfaces was achieved through surface modification with excess toluene-2,4-diisocynate (TDI), after which the residual isocyanate groups were converted into ATRP macroinitiators. Structurally well-defined polystyrene chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polystyrene by ATRP, which was initiated by the as-synthesized silica-based macroinitiator. FTIR, NMR and gel permeation chro-matography (GPC) were used to characterize the polystyrene/silica hybrid particles.     

Simple route for synthesis of H‐shaped copolymers

The H‐shaped copolymers, [poly(L ‐lactide)]₂polystyrene [poly(L ‐lactide)]₂, [(PLLA)₂PSt(PLLA)₂] have been synthesized by combination of atom transfer radical polymerization (ATRP) with cationic ring‐opening polymerization (CROP). The first step of the synthesis is ATRP of St using α,α′‐dibromo‐p‐xylene/CuBr/2,2′‐bipyridine as initiating system, and then the PSt with two bromine groups at both chain ends (Br–PSt–Br) were transformed to four terminal hydroxyl groups via the reaction of Br–PSt–Br with diethanolamine in N,N‐dimethylformamide. The H‐shaped copolymers were produced by CROP of LLA, using PSt with four terminal hydroxyl groups as macroinitiator and Sn(Oct)₂ as catalyst. The copolymers obtained were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2794–2801, 2006     

Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

The synthesis of water‐soluble PHEMA via ARGET ATRP in protic media

2‐Hydroxyethyl methacrylate has been polymerized in methanol using activators regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP), to produce water‐soluble poly(2‐hydroxyethyl methacrylate) (PHEMA). The various parameters that determine control of the living polymerization have been explored. Using the Cu(II)/TPMA catalyst system (TPMA = tris(2‐pyridylmethyl)amine), controlled polymerization was achieved with Cu concentrations as low as 50 ppm relative to HEMA, with a [TPMA]/[Cu(II)] ratio of 5. Use of hydrazine as the reducing agent generally gave better control of polymerization than use of ascorbic acid. The polymerization conditions were tolerant of small amounts of air, and colorless polymers were easily isolated by simple precipitation and washing steps. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4084–4092, 2010     

Solid‐supported amphiphilic triblock copolymer membranes grafted from gold surface

Gold‐supported amphiphilic triblock copolymer brushes composed of two hydrophilic poly(2‐hydroxyethyl methacrylate) (PHEMA) blocks and a hydrophobic poly(n‐butyl methacrylate) (PBMA) middle part were synthesized using a surface‐initiated ATRP. Attenuated total reflectance Fourier transform infrared spectroscopy, polarization modulation infrared reflection absorption spectroscopy (PM‐IRRAS), ellipsometry, contact angle measurements, and atomic force microscopy were used for the characterization of PHEMA‐co‐PBMA‐co‐PHEMA brushes. The PM‐IRRAS analysis revealed an increase of the chain tilt toward the gold surface during growth of the individual blocks. We suggest that the orientation of the amphiphilic polymer brushes is influenced by both the chain length and the interchain interactions. Additionally, a detachment of the polymer membranes from the solid support and subsequent gel permeation chromatography analyses allowed us to establish their compositions. We applied block‐selective solvents (water and hexane) as well as a good solvent for the whole polymer chain (ethanol) to study the morphology and solvent responsive behavior of the amphiphilic brushes. The presented results could serve as a good starting point for the fabrication of functional solid‐supported membranes for biosensing applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1–13, 2009