From poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) triblock copolymer to poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) hydrogels: Synthesis and rapid deswelling and reswelling behavior of hydrogels

Poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) (PNIPAAm‐b‐PEO‐b‐PNIPAAm) triblock copolymer was synthesized via the reversible addition‐fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process with xanthate‐terminated poly(ethylene oxide) (PEO) as the macromolecular chain transfer agent. The successful synthesis of the ABA triblock copolymer inspired the preparation of poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) (PNIPAAm‐b‐PEO) copolymer networks with N,N′‐methylenebisacrylamide as the crosslinking agent with the similar approach. With the RAFT/MADIX process, PEO chains were successfully blocked into poly(N‐isopropylacrylamide) (PNIPAAm) networks. The unique architecture of PNIPAAm‐b‐PEO networks allows investigating the effect of the blocked PEO chains on the deswelling and reswelling behavior of PNIPAAm hydrogels. It was found that with the inclusion of PEO chains into the PNIPAAm networks as midblocks, the swelling ratios of the hydrogels were significantly enhanced. Furthermore, the PNIPAAm‐b‐PEO hydrogels displayed faster response to the external temperature changes than the control PNIPAAm hydrogel. The accelerated deswelling and reswelling behaviors have been interpreted based on the formation of PEO microdomains in the PNIPAAm networks, which could act as the hydrophilic tunnels to facilitate the diffusion of water molecules in the PNIPAAm networks. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of small uncharged but amphiphilic molecules on the lower critical solution temperature of highly homogeneous N‐alkylacrylamide oligomers

The influence of small alkylamines with increasing carbon chain length (≤5) on the temperature‐induced precipitation of two N‐alkylacrylamide oligomers, poly‐N‐isopropylacrylamide [PNIPAAm; weight‐average molecular weight (M_w ) = 1600 g/mol] and poly‐N,N‐diethylacrylamide (PDEAAm; M_w = 4000 g/mol), from an aqueous solution was investigated. The alkylamines in question were too small to form micelles in the classical sense but were capable of premicellar aggregation. PNIPAAm was prepared by radical polymerization in the presence of a chain‐transfer agent and, therefore, carried a carboxylic acid end group. The structure was heterotactic. PDEAAm was prepared by anionic polymerization and, therefore, carried a butyl end group. The structure was predominately isotactic. The solubility of the oligomers was investigated by cloud‐point measurements and differential scanning calorimetry. In addition, pyrene was used as a fluorescent polarity probe. Alkylamines up to C₂ depressed the lower critical solution temperature (LCST) of PNIPAAm, whereas higher alkylamines first depressed the LCST and at higher concentrations elevated it. The LCST minimum showed a clear dependence on the alkyl chain length and structure. For PDEAAm, only pentylamine addition resulted in an LCST minimum. Otherwise, the LCST was raised. When the critical self‐association concentration (CSAC) of the alkylamines in water was compared to the critical association concentration (CAC) in aqueous oligomer solutions, PDEAAm, but not PNIPAAm, stabilized mixed aggregates (CAC < CSAC). The transition enthalpy of PNIPAAm decreased with an increasing alkylamine concentration and became 0 above the CAC. For PDEAAm, no transition endotherm could be recorded above an alkylamine concentration of 0.1 M. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4218–4229, 2000     

Polyisobutylene‐b‐Poly(N,N‐diethylacrylamide) well‐defined amphiphilic diblock copolymer: Synthesis and thermo‐responsive phase behavior

Polyisobutylene‐b‐poly(N,N‐diethylacrylamide) (PIB‐b‐PDEAAm) well‐defined amphiphilic diblock copolymers were synthesized by sequential living carbocationic polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The hydrophobic polyisobutylene segment was first built by living carbocationic polymerization of isobutylene at ?70 ° C followed by multistep transformations to give a well‐defined (M_w/M_n = 1.22) macromolecular chain transfer agent, PIB‐CTA. The hydrophilic poly(N,N‐diethylacrylamide) block was constructed by PIB‐CTA mediated RAFT polymerization of N,N‐diethylacrylamide at 60 ° C to afford the desired well‐defined PIB‐b‐PDEAAm diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.26). Fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering (DLS) were employed to investigate the self‐assembly behavior of PIB‐b‐PDEAAm amphiphilic diblock copolymers in aqueous media. These diblock copolymers also exhibited thermo‐responsive phase behavior, which was confirmed by UV‐Vis and DLS measurements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1143–1150     

Atypical transition temperature dependence of poly(N‐isopropylacrylamide) and poly(N‐isopropylacrylamide‐co‐acrylamide) nanocomposites on the content of exfoliated montmorillonites

Exfoliated montmorillonite (MMT)/poly(N‐isopropylacrylamide) (PNIPAAm) and MMT/poly(N‐isopropylacrylamide‐co‐acrylamide) [P(NIPAAm‐co‐AAm)] nanocomposites were fabricated by soap‐free emulsion polymerization. Interestingly, as the content of MMT was increased from 0 to 10 wt %, the glass transition temperature of MMT/PNIPAAm was decreased from 145 to 122 °C, whereas that of the MMT/P(NIPAAm‐co‐AAm) increased from 95 to 153 °C. Although the lower critical solution temperature (LCST) of 32 °C for the MMT/PNIPAAm nanocomposites in aqueous solutions was slightly increased with the content of MMT, that of the MMT/P(NIPAAm‐co‐AAm) was decreased from 70 to 65 °C. A mechanism that the hydrogen bonds between the amide groups of PNIPAAm were interfered by the exfoliated MMT nano‐platelets for the MMT/PNIPAAm nanocomposites and the preferred absorption of acrylamide units to the MMT nanoplatelets rather than N‐isopropylacrylamide in the MMT/P(NIPAAm‐co‐AAm) nanocomposites was suggested to interpret these unusual transition behavior. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 524–530, 2009     

Synthesis and self‐assembling of poly(N‐isopropylacrylamide‐block‐poly(L‐lactide)‐block‐poly(N‐isopropylacrylamide) triblock copolymers prepared by combination of ring‐opening polymerization and atom transfer radical polymerization

Novel thermo‐responsive poly(N‐isopropylacrylamide)‐block‐poly(l ‐lactide)‐block‐poly(N‐isopropylacylamide) (PNIPAAm‐b‐PLLA‐b‐PNIPAAm) triblock copolymers were successfully prepared by atom transfer radical polymerization of NIPAAm with Br‐PLLA‐Br macroinitiator, using a CuCl/tris(2‐dimethylaminoethyl) amine (Me₆TREN) complex as catalyst at 25 °C in a N,N‐dimethylformamide/water mixture. The molecular weight of the copolymers ranges from 18,000 to 38,000 g mol^?1, and the dispersity from 1.10 to 1.28. Micelles are formed by self‐assembly of copolymers in aqueous medium at room temperature, as evidenced by ¹H NMR, dynamic light scattering (DLS) and transmission electron microscopy (TEM). The critical micelle concentration determined by fluorescence spectroscopy ranges from 0.0077 to 0.016 mg mL^?1. ¹H NMR analysis in selective solvents confirmed the core‐shell structure of micelles. The copolymers exhibit a lower critical solution temperature (LCST) between 32.1 and 32.8 °C. The micelles are spherical in shape with a mean diameter between 31.4 and 83.3 nm, as determined by TEM and DLS. When the temperature is raised above the LCST, micelle size increases at high copolymer concentrations due to aggregation. In contrast, at low copolymer concentrations, decrease of micelle size is observed due to collapse of PNIPAAm chains. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3274–3283     

Dual responsive poly(N‐isopropylacrylamide) hydrogels having spironaphthoxazines as pendant groups

Stimuli responsive hydrogels (PNIPAAm‐MSp) with a thermoresponsive backbone and photochromic pendant groups were synthesized via free radical polymerization using N‐isopropylacrylamide, modified spironaphthoxazines with a polymerizable double bond (MSp) as photochromic monomer, the crosslinker N,N′‐methylenebis(acrylamide) and the initiator 2,2′‐azobis(isobutyronitrile) in dimethylsulfoxide. The polymers are dual responsive, in that poly(N‐isopropylacrylamide) (PNIPAAm) responds to temperature changes whereas the pendant spironaphthoxazines respond to light. Irradiation enhanced the water absorption of the polymers while increases in temperature decreased it. The irradiated PNIPAAm‐MSp showed best water absorption at 0 °C (Q = 3.25) while water desorbed at higher temperatures (35 °C; Q = 0.30); where Q is the amount of water absorbed by a gram of dry polymer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3318–3325, 2009     

Robust Poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) Particles Prepared by Physical Crosslinking with Poly(styrene sulfonate)

Summary: Robust thermosensitive PAH‐g‐PNIPAAm/PSS particles were prepared by addition of a poly(allylamine)‐graft‐poly(N‐isopropylacrylamide) particle suspension into poly(styrene sulfonate) solution above the LCST of PAH‐g‐PNIPAAm. Scanning force microscopy revealed stable and well‐separated particles in water at room temperature. The zeta‐potential showed a negative surface charge of the particles. Their thermosensitive behavior was demonstrated by dynamic light scattering. The release of rhodamine 6G loaded particles could respond to the incubation temperature.

Fabrication of thermosensitive and robust particle by suspension of in situ formed PAH‐g‐PNIPAAm particle above the LCST in PSS solution.     

Study on synthesis of poly(N‐isopropylacrylamide) grafted carbon black and temperature‐dependence conductivity of grafted carbon black/epoxy composites

Carbon black nanoparticle grafted with poly(N‐isopropylacrylamide) (CB‐g‐PNIPAAm) was synthesized by surface‐initiated atom transfer radical polymerization (SI‐ATRP). The temperature‐responsive behavior of CB‐g‐PNIPAAm was proved by temperature‐variable ¹H NMR. A temperature‐dependent conductive composite was prepared by blending CB‐g‐PNIPAAm with epoxy resin. The relationship between temperature and resistivity of the composite was studied: the composite exhibited a negative temperature coefficient (NTC) phenomenon. Possible mechanism for the NTC phenomenon was suggested. The results showed that resultant composites can be used in intelligent temperature‐switching. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1529–1535, 2008     

一步法制备PNIPAAm-g-PAN/PSt载银复合微球及其抗菌性能研究

以AgNO3为金属源,通过乙醇将与聚N-异丙基丙烯酰胺接枝聚丙烯腈/聚苯乙烯（PNIPAAm-g-PAN/PSt）聚合物微球表面酰胺基团配位的银离子（Ag+）还原,一步法制备了PNIPAAm-g-PAN/PSt载银复合微球。通过傅立叶变换红外（FTIR）和紫外-可见光光谱表征发现,由Ag+还原所得的Ag纳米颗粒被成功地固载在PNIPAAm-g-PAN/PSt 微球上;用透射电子显微镜（TEM）对载银微球的大小和形态进行了表征;热重分析（TGA）结果表明,固载在微球表面的银纳米颗粒的含量（质量分数）为12%;抗菌实验结果表明,所制备的载银微球具有抗革兰氏阴性菌的活性。     

Poly(N‐isopropylacrylamide) Nanoparticle‐Incorporated PNIPAAm Hydrogels with Fast Shrinking Kinetics

Summary: Novel temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAAm) nanoparticle‐containing PNIPAAm hydrogels were prepared by radical polymerization. In comparison with conventional PNIPAAm hydrogels, the PNIPAAm gels thus prepared exhibit much faster response rates as the temperature is raised above the lower critical solution temperature. The improved properties are a result of the incorporation of PNIPAAm particles, which first shrink and then generate pores for water molecules to be quickly squeezed out of the bulky PNIPAAm gels.

Schematic illustration of the shrinking process: (I) First PNIPAAm particles shrink and generate pores; (II) the bulky gels then shrink further at a rapid rate.     

Preparation of polysulfone‐g‐poly(N‐isopropylacrylamide) graft copolymers through atom transfer radical polymerization and formation of temperature‐responsive nanoparticles

Polysulfone‐g‐poly(N‐isopropylacrylamide) (PSf‐g‐PNIPAAm) graft copolymers were prepared from atom transfer radical polymerization of NIPAAm using chloromethylated PSf as a macro‐initiator. The chain lengths of PNIPAAm of the graft copolymers were controllable with polymerization reaction time. The chemical structures of the graft copolymers were characterized with FTIR, NMR, and elemental analysis and their amphiphilic characteristics were examined and discussed. The PSf‐g‐PNIPAAm graft copolymers and the nanoparticles made from the graft copolymers exhibited repeatable temperature‐responsive properties in heating–cooling cycles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4756–4765, 2008     

Synthesis and characterization of well‐defined,amphiphilic poly(N‐isopropylacrylamide)‐ b‐[2‐hydroxyethyl methacrylate‐poly(ϵ‐caprolactone)]n graft copolymers by RAFT polymerization and macromonomer method

The well‐defined, thermosensitive and biodegradable graft copolymers, poly(N‐isopropylacrylamide)‐b‐[2‐hydroxyethyl methacrylate‐poly(ε‐caprolactone)]_n (PNIPAAm‐b‐(HEMA‐PCL)_n) (n = 3 or 9), were synthesized by combining reversible addition‐fragmentation chain transfer polymerization and macromonomer method. The copolymers were able to self‐assemble into micelles in water with low critical micellar concentration and demonstrated temperature sensitivity with a lower critical solution temperature at around 36 °C. Transmission electron microscopy shows that the micelles exhibit a nanosized spherical morphology within a size range of 30–100 nm. The PNIPAAm‐b‐(HEMA‐PCL)₃ copolymer exhibited biodegradation and low cytotoxicity. The paclitaxel‐loaded PNIPAAm‐b‐(HEMA‐PCL)₃ micelles displayed thermosensitive controlled release behavior, which indicates potential as drug carriers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5354–5364, 2007     

Synthesis of transition‐metal‐ion‐selective poly(N‐isopropylacrylamide) hydrogels by the incorporation of an Aza crown ether

A functionalized cyclam was synthesized by the attachment of a polymerizable acryloyl group to one of the four nitrogens on the cyclam molecule. The polymerization of the functionalized cyclam was performed with N‐isopropylacrylamide and N,N′‐methylene bisacrylamide, and the gels obtained were studied in the presence of different transition‐metal‐ion solutions. There was a drastic difference in the phase‐transition temperature (T_c) of the poly(N‐isopropylacrylamide) (PNIPAAm)/cyclam gel in comparison with the pure PNIPAAm gel. For the described system, a T_c shift of 15 °C was obtained. The presence of functionalized cyclam increased the hydrophilicity and T_c of the aforementioned polymer gels in deionized water (at pH 6) because of the presence of protonated amino moieties. The PNIPAAm/cyclam gels showed a dependence of the swelling behavior on pH. T_c of the pure PNIPAAm gel was weakly influenced by the presence of any transition‐metal ions, such as Cu²⁺, Ni²⁺, Zn²⁺, and Mn²⁺. The addition of Cu²⁺ or Ni²⁺ to the PNIPAAm/cyclam gel reduced T_c of the polymer gel, and a shift of approximately 12 °C was observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1594–1602, 2003     

Investigation of swelling,drug release and diffusion behaviors of poly(N‐isopropylacrylamide)/poly (N‐vinylpyrrolidone) full‐IPN hydrogels

The synthesis of sequential full interpenetrating polymer networks (IPNs) based on poly (N‐isopropylacrylamide) (PNIPAAm) and negatively charged poly(N‐vinyl‐2‐pyrrolidone) (PNVP) was described and their swelling, drug release, and diffusion studies were investigated. PNIPAAm was used as a host network. According to swelling experiments, IPNs gave relatively lower swelling ratios compared to PNIPAAm hydrogel due to the higher cross‐linking density. Lidocaine (LD) was used as a model drug for the investigation of drug release behavior of IPNs. LD uptake of the IPNs were found to increase from 24 to 166 (mg LD / g dry gel) with increasing amount of PNIPAAm and AMPS contents in the IPN structure. It was observed that the specific interaction between drug and AMPS co‐monomer influenced the drug release profile. In the diffusion transport mechanism study in water, the results indicated that the swelling exponents n for all IPNs are in the range from 0.50 to 0.72. This implies that the swelling transport mechanism was transferred from Fickian to non‐Fickian transport, with increasing AMPS content and NIPAAm character in the IPN structure. In addition, diffusion of LD within the IPNs showed similar trend. The incorporation of AMPS leads to an increase in electrostatic interaction between charge sites on carboxylate ions and cationic LD molecules. Therefore, the highest diffusion coefficient (D) of drug was found for IPN2 sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Dextran Hydrogels Containing Poly(N‐isopropylacrylamide) as Grafts and Cross‐Linkers Exhibiting Enzymatic Regulation in a Specific Temperature Range

Summary: Specific temperature‐responsive biodegradable hydrogels were synthesized and characterized in terms of their regulation of enzymatic accessibility based on the physical properties of the temperature‐responsive polymers. The hydrogels consist of glycidyl methacrylate‐modified dextran grafted with the poly(N‐isopropylacrylamide) (PNIPAAm) homopolymer, and cross‐linked by co‐polymerization with NIPAAm and N,N‐dimethylacrylamide (DMAAm). The coil‐globule change in the grafted poly(NIPAAm) chains and only a slight dehydration of the poly(NIPAAm‐co‐DMAAm) cross‐linkers are effective in controlling the enzymatic degradation over a specific temperature range.

The thermo‐responses of the graft chains (steric hindrance) and the crosslinkers (slight deswelling of the hydrogel networks) control the enzymatic degradation of the hydrogel.     

Thermo‐ and pH‐Responsive Micelles of Poly(acrylic acid)‐block‐Poly(N,N‐diethylacrylamide)

Summary: The bis‐hydrophilic block copolymer, poly(acrylic acid)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀, was obtained after hydrolysis of poly(tert‐butyl acrylate)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀, synthesized by sequential anionic polymerization of tert‐butyl acrylate (tBA) and N,N‐diethylacrylamide (DEAAm) in the presence of Et₃Al. The polymer is stimuli‐sensitive with respect to both pH and temperature in aqueous solution, reversibly forming spherical crew‐cut micelles with PDEAAm‐core (〈R_h〉_z = 21.5 nm) under alkaline conditions for T > 35 °C as well as inverse star‐like micelles with an expanded PAA‐core (〈R_h〉_z = 43.8 nm) under acidic conditions for T < 35 °C, as indicated by dynamic light scattering.

Modes of micelle formation for poly(acrylic acid)₄₅‐block‐poly(N,N‐diethylacrylamide)₃₆₀ in aqueous solution depending on the pH and temperature.     

Synthesis and functionalities of poly(N‐vinylalkylamide). XII. Synthesis and thermosensitive property of poly(vinylamine) copolymer prepared from poly(N‐vinylformamide‐co‐N‐vinylisobutyramide)

The differences in the polymerization abilities of N‐vinylformamide (NVF) and N‐vinylisobutyramide (NVIBA) and the synthesis of their copolymers were studied. The polymerization abilities were fairly good and quite similar to those of N‐vinyl‐ acetamide (NVA), a monomer in the same class as N‐vinylalkylamides. Since the monomer reactivity ratios were r₁ = 1.08 and r₂ = 0.92 (M₁ = NVF, M₂ = NVIBA), respectively, it is clear that the comonomers definitely were converted to random copolymers. The resulting copolymers poly(NVF‐co‐NVIBA) exhibited the cloud points sharply. The light transmittance profiles were the same as those for poly(NVIBA) although they increased from 39 °C for poly(NVIBA), with an increase in the corresponding hydrophilic NVF component. Our final objective was to produce a cloud point controlled polymer material with primary amino groups. To achieve this, we examined the hydrolysis of poly(NVF), poly(NVA), poly(NVIBA), and poly(NVF‐co‐NVIBA) to obtain poly(vinylamine) [poly(VAm)]. The hydrolytic cleavage of poly(NVF) and poly(NVA) was promoted by an increase in temperature. However, poly(NVIBA) was not cleaved appreciably. The hydrolysis of poly(NVF‐co‐NVIBA) was done under controlled conditions, and amino groups selectively were introduced to only one of two components of the copolymer. The cloud point of the hydrolyzed copolymer shifted to a higher temperature than that of the copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3674–3681, 2000     

Effect of polystyrene‐b‐poly(ethylene oxide) on self‐assembly of polystyrene‐b‐poly(N‐isopropylacrylamide) in aqueous solution

Mixed micelles of polystyrene‐b‐poly(N‐isopropylacrylamide) (PS‐b‐PNIPAM) and two polystyrene‐b‐poly(ethylene oxide) diblock copolymers (PS‐b‐PEO) with different chain lengths of polystyrene in aqueous solution were prepared by adding the tetrahydrofuran solutions dropwise into an excess of water. The formation and stabilization of the resultant mixed micelles were characterized by using a combination of static and dynamic light scattering. Increasing the initial concentration of PS‐b‐PEO in THF led to a decrease in the size and the weight average molar mass (〈M_w〉) of the mixed micelles when the initial concentration of PS‐b‐ PNIPAM was kept as 1 × 10^?3 g/mL. The PS‐b‐PEO with shorter PS block has a more pronounced effect on the change of the size and 〈M_w〉 than that with longer PS block. The number of PS‐b‐PNIPAM in each mixed micelle decreased with the addition of PS‐b‐PEO. The average hydrodynamic radius 〈R_h〉 and average radius of gyration 〈R_g〉 of pure PS‐b‐PNIPAM and mixed micelles gradually decreased with the increase in the temperature. Both the pure micelles and mixed micelles were stable in the temperature range of 18 °C–39 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1168–1174, 2010     

Temperature‐sensitive poly(N‐isopropylacrylamide)‐grafted surfaces modulate blood platelet interactions

Interactions between a temperature‐responsive poly(N‐isopropylacrylamide)‐grafted surface and blood platelets have been analyzed with computerized image analysis. Platelet behavior on this surface is dramatically dependent upon temperature in contrast to that on poly(ethylene glycol) (PEG)‐grafted surfaces or polystyrene. The poly(N‐isopropylacrylamide)‐grafted surface interacts with platelets similarly as the poly(ethylene glycol)‐rafted surface at 18°C. At 37°C, platelets readily adhere onto the poly(N‐isopropylacrylamide)‐grafted surface similarly as to that of polystyrene.     

Magnetic poly(N‐isopropylacrylamide) microspheres by dispersion and inverse emulsion polymerization

The aim of this study was to develop novel thermally responsive polymer microspheres with magnetic properties. Dispersion and inverse emulsion copolymerization of N‐isopropylacrylamide (NIPAAm) and N,N′‐methylenebisacrylamide (MBAAm) was investigated in the presence of γ‐Fe₂O₃ nanoparticles. The resulting microspheres were characterized in terms of morphology, size, polydispersity, iron content, and temperature‐dependent swelling using optical microscopy, transmission electron microscopy, scanning electron microscopy, QELS, and AAS. The effects of several variables, such as the concentration of γ‐Fe₂O₃, MBAAm crosslinking agent, Span 80 surfactant, 2,2′‐azobis(2‐methyloctanenitrile) (AMON) initiator, and polymerization temperature on the properties of the microspheres were studied. Swelling and thermoresponsive behavior of the microspheres containing γ‐Fe₂O₃ nanoparticles were also investigated. The microspheres contained about 8 wt % of iron. The presence of magnetic nanoparticles and their concentration changes did not have any significant effect on the temperature sensitivity of the composites. The particles gradually shrink into an increasingly collapsed state when the temperature is raised to 40 °C since the increase in temperature weakens the hydration and PNIPAAm chains gradually become more hydrophobic, which leads to the collapse of the particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5884–5898, 2007