Fabrication and characterization of UV‐crosslinkable thermoresponsive composite fibers with magnetic properties

Crosslinking magnetic thermoresponsive composite (MTC) fiber mats were fabricated by electrospinning process and followed by UV curing. Thermoresponsive poly‐(N‐isopropylacrylamide) (PNIPAAm) and magnetic Fe₃O₄ were firstly synthesized by redox‐initiated polymerization and co‐precipitation, respectively. A crosslinking agent (dipentaerythritol hexylacrylate) and photoinitiator for providing crosslinking ability were then mixed with PNIPAAm and Fe₃O₄ in ethanol as the electrospinning solution. After electrospinning and subsequent UV irradiation, the MTC fiber mats were thus obtained. Thermoresponsivity of the MTC fibers was measured by both DSC and swelling test. MTC fiber mat exhibited better water‐absorption capability and thermoresponsivity than corresponding film. Morphological analysis was observed by SEM and TEM, and the magnetic property was measured by SQUID. The thermoresponsive magnetic behavior of MTC fiber mat in water was observed under various temperatures and magnetic fields. Vitamin B₁₂ used as a model drug was loaded in the MTC fiber mats and the drug‐release behavior was then studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2152–2162     

Synthesis and mechanical properties of para‐aramid nanofibers

Scalable, bottom‐up chemical synthesis and electrospinning of novel Cl‐substituted poly(para‐phenylene terephthalamide) (PPTA) nanofibers are herein reported. To achieve Cl‐PPTA nanofibers, the chemical reaction between the monomers was precisely controlled, and dissolution of the polymer into solvent was tailored to enable anisotropic solution formation and sufficient entanglement molecular weight. Electrospinning processing parameters were studied to understand their effects on fiber formation and mat morphology and then optimized to yield consistently high quality fibers. Importantly, the control of relative humidity during the fiber formation process was found to be critical, likely because water promotes hydrogen bond formation between the PPTA chains. The fiber and mat morphologies resulting from different combinations of chemistry and spinning conditions were observed using scanning electron microscopy, and observations were used as inputs to the optimization process. Tensile properties of single Cl‐PPTA nanofibers were characterized for the first time using a nanomanipulator mounted inside a scanning electron microscope (SEM), and fiber moduli measuring up to 70 GPa, and strengths exceeding 1 GPa were achieved. Given the excellent mechanical properties measured for the nanofibers, this chemical synthesis procedure and electrospinning protocol appear to be a promising route for producing a new class of nanofibers with ultrahigh strength and stiffness. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 563–573     

Preparation and properties of thermoresponsive and conductive composite fibers with core‐sheath structure

In this research, thermoresponsive and conductive fibers with core‐sheath structure were fabricated by coaxial electrospinning. For preparing the spinning sheath solution, poly‐(N‐isopropylacrylamide‐co‐N‐methylolacrylamide) (PNN) copolymer having thermoresponsive and cross‐linkable properties was synthesized by free‐radical polymerization using redox initiators; it was then mixed with the conductive poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) at different weight ratios in water. On the other hand, poly(butyl acrylate‐co‐styrene) (PBS) copolymer synthesized by emulsion polymerization was dissolved in chloroform and used as the spinning core solution. After electrospinning, the fibers were treated at 110 °C for 1 h to cross‐link the PNN portion in the sheath for strengthening the fibers. Well‐defined core‐sheath fibers were observed from SEM pictures; the outside and inside (core) diameters were 568 ± 24 and 290 ± 40 nm, respectively, as determined from TEM pictures. The fiber mats were further doped by DMSO to enhance their conductivity. For the fiber mat with the weight ratio of PEDOT:PSS/PNN at 0.20 in the sheath, its surface conductivity could reach 29.4 S/cm. In addition, the fiber mats exhibited thermoresponsive properties that both swelling ratio and electric resistance decreased with temperature. Furthermore, the fiber mats exhibited improved flexibility as evaluated via bending test. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1299–1307     

Polyacrylonitrile fiber mat‐supported palladium catalyst for Mizoroki–Heck reaction in aqueous solution

A novel palladium catalyst immobilized on polyacrylonitrile fiber mats (Pd/PAN) was prepared by electrospinning. The catalytic activity and recyclability of the microwave‐assisted Pd/PAN fiber mats were examined for the Mizoroki–Heck cross‐coupling of aryl iodides with three different acrylates in aqueous solution. The morphology of the prepared Pd/PAN fiber mats was characterized by scanning electron microscopy. The large size of the PAN fiber mat‐supported palladium catalyst enables much easier separation from the reaction mixture by simple filtration. Density functional theory calculation indicates that the chelation energy of palladium chloride (PdCl₂) with propionitrile (model of PAN) is considerable smaller than that of PdCl₂ with water, suggesting that the stability and reactivity of the Pd/PAN fiber mats catalyst could be improved through the surface derivatization with polar functional groups. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermoresponsive conductive polymer composite thin film and fiber mat: Crosslinked PEDOT:PSS and P(NIPAAm‐co‐NMA) composite

The thermoresponsive conductive composite (TCC) thin films and fiber mats, whose electrical property changed with temperature, were fabricated successfully. The thermocrosslinkable and thermoresponsive copolymer, poly(N‐isopropyl acrylamide‐co‐N‐methylolacrylamide) (PNN), was synthesized. The TCC thin film and fiber mat were fabricated by spin coating and electrospinning process of PEDOT:PSS/PNN solutions, respectively. After thermocrosslinking and doping by DMSO, the composite thin films and fiber mats were obtained. Fibrous structures of TCC fiber mats were observed by SEM. The surface resistance and conductivity of composites were measured. The thermoresponsivity and swelling ratio of TCCs were also studied. The thermoresponsive conductive property was analyzed by measuring the surface resistance of TCCs in water bath under various temperatures from 20 to 50 °C. With the increase of temperature, the TCCs shrank to be dense structure and showed lower surface resistance. The TCC fibers mat exhibited greater sensitivity to temperature than thin film owing to its fibrous structure. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1078–1087     

Electrospun fiber mats of poly(3‐hydroxybutyrate), poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), and their blends

Electrospinning of poly(3‐hydroxybutyrate) (PHB), poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and their blends was first carried out in chloroform at 50 °C on a stationary collector. The average diameter of the as‐spun fiber from PHB and PHBV solutions decreased with increasing collection distance and increased with increasing solution concentration and applied electrical potential. In all of the spinning conditions investigated, the average diameter of the as‐spun pure fibers ranged between 1.6 and 8.8 μm. Electrospinning of PHB, PHBV, and their blends was carried out further at a fixed solution concentration of 14% w/v on a homemade rotating cylindrical collector. Well‐aligned, cross‐sectionally round fibers without beads were obtained. The average diameter of the as‐spun pure and blend fibers ranged between 2.3 and 4.0 μm. The as‐spun fiber mats appeared to be more hydrophobic than the corresponding films and much improvement in the tensile strength and the elongation at break was observed for the blend fiber mats over those of the pure fiber ones. Lastly, indirect cytotoxicity evaluation of the as‐spun pure and blend fiber mats with mouse fibroblasts (L929) indicated that these mats posed no threat to the cells. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2923–2933, 2006     

Preparation of biaxial orientation mats from single fibers

Electrospinning provides a simple and versatile method for fabricating nanofiber mats. Electrospun fiber mat of well aligned and order architectures was often required for many applications. In this communication, biaxial orientation mats were electrospun by a novel collector consisting of two rotating disks with conductive edge. In addition, an auxiliary electrode was induced to focus the electrostatic field and force the fibers to align regularly. The biaxial orientation structure was formed with the variation of rotation speed without revolving the fiber mat during the electrospinning process, and the dates presented in this paper demonstrated that the degree of biaxial orientation strongly depended on the rotation speed. This simple method has potential applications in textile and electronic areas. Copyright © 2009 John Wiley & Sons, Ltd.     

Crosslinked PVAL nanofibers with enhanced long‐term stability prepared by single‐step electrospinning

We present a single‐step route for the preparation of crosslinked poly(vinyl alcohol) (PVAL) nanofibers where a conventional electrospinning setup can be used. The simple crosslinking chemistry and the fast and easily applicable technique is an important step towards large‐scale production. In contrast to conventional systems, the PVAL crosslinker solution exhibited no increase in viscosity during storage and can therefore be used even after long shelf‐times before electrospinning. In addition, the crosslinked nanofibrous mats exhibited a gel content of almost 100%, indicating complete crosslinking; they did not dissolve in water, and no PVAL was found in the aqueous extract. The E‐moduli of the nanofibrous mats before and after water immersion could be measured by an intermodulation atomic force microscopy technique. A denser nanofibrous texture with enhanced mechanical properties can be observed after long‐term water immersion. Copyright © 2012 John Wiley & Sons, Ltd.     

A novel method for a high‐strength electrospun meta‐aramid nanofiber by microwave treatment

Electrospun nanofibers have attracted great attention as potential reinforcements in composite application due to their high specific surface area, high porosity, and versatility. Because the electrospun nanofibers exhibit relatively low mechanical strength due to low crystallinity and random alignment, many researchers have tried to enhance the mechanical strength through various approaches, such as heat treatment and fiber orientation control. These methods, however, are difficult to control and require the use of high temperatures and sophisticated apparatuses, and high costs. In this study, we investigate a novel microwave technique to fabricate high‐strength electrospun meta‐aramid nanofiber mats. To optimize the microwave irradiation conditions, the electrospun nanofiber was treated at varying levels of moisture and for different irradiation times. Field emission scanning electron microscopy was used to observe the surface morphology of the electrospun nanofiber mats at the different irradiation times. The changes in the crystallinity and thermal properties were investigated using X‐ray diffraction and thermogravimetric analysis measurements. Tensile tests were performed to measure the mechanical strength of the meta‐aramid nanofiber mats with respect to each parameter. As a result, any residual solvents and salts were removed, and the degree of crystallization was dramatically increased by microwave irradiation under wet conditions. These effects led to a 2.8‐fold increase in the tensile strength of the nanofiber mats compared with an untreated mat. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 807–814     

Aligned and molecularly oriented semihollow ultrafine polymer fiber yarns by a facile method

In this work, aligned and molecularly oriented bone‐like PLLA semihollow fiber yarns were manufactured continuously from an optimized homogeneous polymer‐solvent‐nonsolvent system [PLLA, CH₂Cl₂, and dimethyl formamide (DMF)] by a single capillary electrospinning via self‐bundling technique. Here, it should be emphasized that the self‐bundling electrospinning technique, a very facile electrospinning technique with a grounded needle (which is to induce the self‐bundling of polymer nanofibers at the beginning of electrospinning process), is used for the alignment and molecular orientation of the polymer fiber, and the take‐up speed of the rotating drum for the electrospun fiber yarn collection is very low (0.5 m/s). PLLA can be dissolved in DMF and CH₂Cl₂ mixed solvent with different ratios. By varying the ratios of mixed solvent system, PLLA electrospun semihollow fiber with the porous inner structure and compact shell wall could be formed, the thickness of the shell and the size of inner pores could be adjusted. The results of polarized FTIR and wide angle X‐ray diffraction investigations verified that as‐prepared PLLA semihollow fiber yarns were well‐aligned and molecularly oriented. Both the formation mechanism of semihollow fibers with core‐shell structure and the orientation mechanism of polymer chains within the polymer fibers were all discussed. The as‐prepared self‐bundling electrospun PLLA fiber yarns possessed enhanced mechanical performance compared with the corresponding conventional electrospun PLLA fibrous nonwoven membranes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1118–1125, 2010     

Controlled release of antibiotics from poly‐ε‐caprolactone/polyethylene glycol wound dressing fabricated by direct‐writing melt electrospinning

Wound dressing, which can release anti‐infectives in a controlled way, is taking an important role in the treatment and recovery of the open wound. An adequate release of antibiotics can prevent infections from microorganisms effectively. Among the new candidates of fabricating base materials for wound dressing, electrospinning fiber mats are attracting numerous attentions for their excellent performance in controlled drug delivery. The drug release behavior of electrospinning fiber mats can be tuned by changing the chemical components and the geometric structures of the mats. In this study, fiber mats with different geometric structures, which composed of poly‐ε‐caprolactone (PCL), polyethylene glycol (PEG), and ciprofloxacin (Cip) with different blending ratios, were successfully fabricated by direct‐writing melt electrospinning, and the release behavior of Cip were subsequently investigated in vitro. The results showed that the addition of PEG improved the hydrophilicity of the mats, which in turn affected the manner of drug release. The presence of PEG changed the releasing mechanism from a non‐Fickian diffusion into Fickian diffusion, which indicated that the diffusion of Cip from the composite fiber mats became the main factor of drug release instead of polymer degradation. Besides, with the same composition but different geometric structures, the drug release behavior is of significant difference. Therefore, all the Cip‐loaded composite fiber mats showed antibacterial activities but with different efficiency. In summary, the release of the drug could be controlled by adding PEG and changing the geometric structures according to the different requirement of wound dressings.     

Preparation and characterization of high‐molecular‐weight atactic poly(vinyl alcohol)/sodium alginate/silver nanocomposite by electrospinning

High‐molecular‐weight poly(vinyl alcohol) (PVA)/sodium alginate (SA)/ silver nanocomposite was successfully prepared via electrospinning technique. Water‐based colloidal silver in a PVA/SA blend solution was directly mixing without any chemical and structural modifications into PVA/SA matrix to form an organic‐metallic nanocomposite. The effect of the addition of silver colloidal solution on the PVA/SA/silver nanocomposite was investigated through a series of experiments varying molecular weight of PVA and electrospinning processing parameters such as concentration of PVA solution, PVA/SA blend ratio, applied voltage, and tip‐to‐collector distance. In the case of PVA with number‐average degree of polymerization of 1700, by increasing the amount of SA in spinning solution, the morphology was changed from fine uniform fiber to beaded fiber or bead‐on‐string fiber structure. Increase of the amount of silver colloidal solution resulted in higher charge density on the surface of ejected jet during spinning, thus more electric charges carried by the electrospinning jet. As the charge density increased, the diameter of the nanocomposites became smaller. Transmission electron microscopy images showed that the dense silver nanoparticles were well separately dispersed in PVA/SA matrix. Energy‐disperse X‐ray analysis indicated that carbon, oxygen, natrium, and silver were the principle element of PVA/SA/silver nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1916–1926, 2009     

Processing and characterization of oriented electrospun poly(vinylidene fluoride) mats

Mats of highly oriented poly(vinylidene fluoride) nanofibers were electrospun by means of a conventional electrospinning equipment; the orientation, however, was obtained using a disk collector rotating at a speed of 4000 rpm and a device that reduced the influence of air displacement during nanofiber orientation. Thermal transitions of the mats were determined by differential scanning calorimetry, the predominant crystalline phase by Fourier transform infrared spectroscopy and wide‐angle X‐ray scattering and the nanofiber orientation and morphology by scanning electron microscopy. Relative permittivity, loss index, stable remnant polarization, and coercive field of the mats were also determined and compared with those obtained for a mat electrospun at 2000 rpm and an oriented commercial film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 000: 000–000, 2012     

Fabrication and electrochemical instrumentation of redox‐active nanofiber mat for polyaniline incorporated with poly(imide sulfonate)

In this study, we demonstrate the fabrication of an electrochemically active nanofiber mat that is a composite of high‐performance poly(imide sulfonate) (PIS) and polyaniline (PANI). First, a nonconductive nanofiber mat comprising nanofibers having diameters of ca. 300 nm was fabricated by the electrospinning of ionomeric PIS in N,N‐dimethylformamide (DMF). Then, the nanofibers were modified using PANI, which was synthesized by the oxidative polymerization of aniline, yielding an electrochemically active nanofiber mat having a diameter of ca. 350 nm. It was confirmed that PANI was successfully incorporated onto the PIS nanofiber mats by X‐ray photoelectron spectroscopy. Subsequently, we conducted electrochemical measurements of the PANI‐modified nanofiber mats using a tailor‐made attachment in which the working electrode gently comes in contact with the nanofiber mat surface. This attachment was observed to be widely useful in the cyclic voltammetry measurements related to redox‐active nanofibers. These observations are expected to contribute to the advancements in application development of the electrochemically active nanofiber mats.     

Mechanical behavior of electrospun fiber mats of poly(vinyl chloride)/polyurethane polyblends

Various polyblends of poly(vinyl chloride) and polyurethane (PU) dissolved in a mixture of tetrahydrofuran and N,N‐dimethylformamide were produced by electrospinning, in different ratios, with several electrospinning conditions, and the relationship between morphology and mechanical behavior of the resulting fiber mats was examined in detail. The surface tension, viscosity, and electrical conductivity of polymer solutions affecting electrospinning were measured, and scanning electron microscopy (SEM) along with a universal testing machine were used to examine the family of polyblends under investigation. The SEM images demonstrated that point‐bonded structures in the fiber mats rose with increasing PU composition, and the mechanical properties of the fiber mats, as determined in a static tensile test, can be considered to have a strong effect by the point‐bonded structure. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1256–1262, 2003     

Effect of side‐chain length on the electrospinning of perfluorosulfonic acid ionomers

The effect of the side‐chain length (short side chain and long side chain, SSC and LSC, respectively) of perfluorosulfonic acid (PFSA) ionomers on the properties of nanofibers obtained by electrospinning ionomer dispersions in high dielectric constant liquids has been investigated with a view to obtaining electrospun webs as components of fuel cell membranes. Ranges of experimental conditions for electrospinning LSC and SSC PFSAs have been explored, with a scoping of solvents, carrier polymer and PFSA ionomer concentrations, and carrier polymer molecular weight. Under optimal conditions, the electrospun mats derived from SSC and from LSC PFSA show distinct fiber dimensions that arise from the different chain lengths of the respective ionomers. Enhanced interchain interactions in SSC PFSA with low equivalent weight compared to LSC PFSA result in a considerably lower average fiber diameter and a markedly narrower fiber size distribution. The proton conductivity of nanofiber mats of SSC and LSC PFSA with equivalent weights of 830 and 900 g mol^?1, respectively, are 102 and 58 mS cm^?1 at 80°C and 95% relative humidity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Mass preparation of nanofibers by high pressure air‐jet split electrospinning: Effect of electric field

A novel electrospinning method using airflow, namely high pressure air‐jet split electrospinning, was proposed to fabricate polymer nanofibers with ultrahigh production rate. 7 wt % polyacrylonitrile spinning solution with a 0.157 Pa s viscosity was divided into micron size droplets by the filter screen in the front of the nozzle, and then these droplets were divided and split through high pressure airflow, which were drafted into nanofibers directly in the electric field and airflow field. In this study, the electric field distributions with different positive electrodes were simulated and their effect on fiber formation was investigated. The results show that electric field distribution and its intensity depended on electrodes area, a broader electric field distribution with a stronger intensity would bring about a larger cone angle of spraying jet region, at the same time, the contrast in the spray region enhanced. When the whole nozzle was charged, thinner fibers with about 170 nm could be prepared and the fiber production was 75.6 g/h. Compared with the conventional needle electrospinning, the throughput of nanofibers could be improved by thousands of times based on this novel electrospinning method. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 993–1001     

Novel routes to epoxy functionalization of PHA‐based electrospun scaffolds as ways to improve cell adhesion

Straightforward and versatile routes to functionalize the surface of poly(3‐hydroxyalkanoate) (PHA) electrospun fibers for improving cell compatibility are reported under relatively mild conditions. The modification of nanofibrous PHAs is implemented through two different methodologies to introduce epoxy groups on the fiber surface: (1) preliminary chemical conversion of double bonds of unsaturated PHAs into epoxy groups, followed by electrospinning of epoxy‐functionalized PHAs blended with nonfunctionalized PHAs, (2) electrospinning of nonfunctionalized PHAs, followed by glycidyl methacrylate grafting polymerization under UV irradiation. The latter approach offers the advantage to generate a higher density of epoxy groups on the fiber surface. The successful modification is confirmed by ATR‐FTIR, Raman spectroscopy, and TGA measurements. Further, epoxy groups are chemically modified via the attachment of a peptide sequence such as Arg‐Gly‐Asp (RGD), to obtain biomimetic scaffolds. Human mesenchymal stromal cells exhibit a better adhesion on the latter scaffolds than that on nonfunctionalized PHA mats. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 816–824     

Carbendazim‐loaded electrospun poly(vinyl alcohol) fiber mats and release characteristics of carbendazim therefrom

Ultra‐fine poly(vinyl alcohol) (PVA) electrospun fiber mats containing carbendazim were successfully fabricated by electrospinning from the neat PVA solution containing carbendazim in various amounts based on the weight of PVA. The morphological appearance of both the neat and the carbendazim‐loaded electrospun PVA fibers were smooth and the incorporation of carbendazim in the neat PVA solution did not affect the morphology of the resulting fibers. The average diameters of the neat and the carbendazim‐loaded electrospun PVA fibers ranged between 155 and 160 nm. The chemical integrity of the as‐loaded carbendazim in the carbendazim‐loaded electrospun PVA fiber mats was intact as verified by the ¹H‐nuclear magnetic resonance spectroscopy. Thermal properties of the carbendazim‐loaded electrospun PVA fiber mats were analyzed by differential scanning calorimetry and thermogravimetric analysis. The release characteristics of the carbendazim‐loaded electrospun PVA mats were investigated by the total immersion method in distilled water at 30°C. The carbendazim‐loaded electrospun PVA mats exhibited greater amount of carbendazim released than the carbendazim‐loaded as‐cast films. Copyright © 2010 John Wiley & Sons, Ltd.     

Characterization of poly(methyl methacrylate) nanofiber mats by electrospinning process

In this study, the aim is to describe the influence of electrospinning parameters on the morphology, the water wetting property and dye adsorption property of poly(methyl methacrylate) nanofiber mats. Specifically, the effects of solution concentration, solvent type, applied voltage, distance between the electrodes and particulate reinforcement on the diameter and shape of the nanofibers were investigated. All poly(methyl methacrylate) nanofiber mats contained beaded nanofiber structures. With increasing the polymer solution concentration, the average fiber diameter also increased. Poly(methyl methacrylate) nanofiber mat electrospun from dimethylformamide solution resulted in thicker fibers when compared with the mat electrospun from acetone solution. Increasing the electric potential difference between the collector and the syringe tip did not increase the average fiber diameter. Besides increasing the distance between the electrodes resulted in a decrease in the average fiber diameter. When compared with PMMA nanofiber mat, thicker fibers were obtained with silica nanoparticles reinforced nanofiber mat. According to the water contact angle measurements, all poly(methyl methacrylate) nanofiber mats revealed hydrophobic surface property. PMMA nanofiber mat with the highest water contact angle gave rise to the highest dye adsorption capacity.