Sol–gel transition behavior of biodegradable three‐arm and four‐arm star‐shaped PLGA–PEG block copolymer aqueous solution

Two types of temperature‐sensitive biodegradable three‐arm and four‐arm star‐shaped poly(DL ‐lactic acid‐co‐glycolic acid‐b‐ethylene glycol) (3‐arm and 4‐arm PLGA–PEG) were successfully synthesized via the coupling reaction of 3‐arm and 4‐arm PLGA and α‐monocarboxyl‐ω‐monomethoxypoly(ethylene glycol) (CMPEG). In dilute aqueous solutions, star PLGA–PEGs showed the temperature‐ and concentration‐dependent formation and aggregation of micelles over specific concentration and specific temperature. With increasing the molecular weight and the relative hydrophobicity of hydrophobic PLGA block, critical micelle temperature (CMT) decreased. Aqueous solution of 4‐arm PLGA–PEG started to form micelles at lower temperature and showed sharper temperature‐dependent growth in micelle size. These results are due to the enhanced hydrophobicity of PLGA block. On the other hand, at high concentration, two types of 3‐arm and 4‐arm PLGA–PEG showed sol–gel–sol transition behavior as the temperature was increased. The 3‐arm and 4‐arm PLGA–PEG showed sol–gel transition at higher polymer concentrations (above 24 wt %) than the PEG–PLGA–PEG triblock copolymer. As the molecular weight and the relative hydrophobicity of PLGA block increased, the critical gel concentration (CGC) decreased. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 888–899, 2006     

The development of phosphinoamine–Pd(II)–imidazole complexes: implications in room‐temperature Suzuki–Miyaura cross‐coupling reaction

The reaction of N‐methylimidazole (N‐MeIm) and N‐butylimidazole (N‐BuIm) with the complexes [PdCl₂(PPh₂py–P,N)] and [PdCl₂(PPh₂Etpy–P,N)] in the presence of NH₄PF₆ under N₂ at room temperature afforded four new cationic Pd(II) complexes [PdCl(PPh₂py–P,N)(N‐MeIm)](PF₆) ( 1 ), [PdCl(PPh₂py–P,N)(N‐BuIm)](PF₆) ( 2 ), [PdCl(PPh₂Etpy–P,N)(N‐MeIm)](PF₆) ( 4 ) and [PdCl(PPh₂Etpy‐P,N)(N‐BuIm)](PF₆) ( 5 ) in good yields, where PPh₂py is 2‐(diphenylphosphino)pyridine and PPh₂Etpy is 2‐{2‐(diphenylphosphino)ethyl}pyridine). The complexes were fully characterized. The catalytic activities of these complexes were investigated for Suzuki–Miyaura cross‐coupling reactions at room temperature. Complex 2 exhibited excellent activity compared to other analogs. Copyright © 2013 John Wiley & Sons, Ltd.     

PEG–PLGA copolymers bearing carboxylated side chains: Novel hydrogels with enhanced crosslinking via ionic interactions

Novel water‐soluble amphiphilic block copolymers with pendant carboxylic acid groups are synthesized and used for the preparation of ionically crosslinked hydrogels. d ,l ‐Lactide (DLLA) and l ?3‐(2‐benzyloxycarbonyl)ethyl‐1,4‐dioxane‐2,5‐dione (BED) are copolymerized at different ratios via organo‐catalyzed ring‐opening polymerization using a hydroxyl‐terminated poly(ethylene glycol) (PEG–OH) macroinitiator. Dynamic light‐scattering experiments show that, at low concentrations, aqueous solutions of these PEG‐P(BED‐DLLA) copolymers form micelles and aggregates. At higher concentrations, thermo‐sensitive gels are obtained, exhibiting a reversible gel‐to‐sol transition upon a temperature increase. Ionic interactions between the COOH groups and metal ions (Cu²⁺ or Ca²⁺) are shown to significantly shift the gel–sol transition to higher temperatures. Thus, the introduction of COOH groups significantly enhances the water solubility of the amphiphilic PEG–polyester copolymer and allows additional crosslinking interactions to form functionalized hydrogels with improved physical properties, making this new class of hydrogels interesting for various applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1222–1227     

Supramolecular hydrogen‐bonding patterns in the organic–inorganic hybrid compound bis(4‐amino‐5‐chloro‐2,6‐dimethylpyrimidinium) tetrathiocyanatozinc(II)–4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine–water (1/2/2)

Zinc thiocyanate complexes have been found to be biologically active compounds. Zinc is also an essential element for the normal function of most organisms and is the main constituent in a number of metalloenzyme proteins. Pyrimidine and aminopyrimidine derivatives are biologically very important as they are components of nucleic acids. Thiocyanate ions can bridge metal ions by employing both their N and S atoms for coordination. They can play an important role in assembling different coordination structures and yield an interesting variety of one‐, two‐ and three‐dimensional polymeric metal–thiocyanate supramolecular frameworks. The structure of a new zinc thiocyanate–aminopyrimidine organic–inorganic compound, (C₆H₉ClN₃)₂[Zn(NCS)₄]·2C₆H₈ClN₃·2H₂O, is reported. The asymmetric unit consist of half a tetrathiocyanatozinc(II) dianion, an uncoordinated 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidinium cation, a 4‐amino‐5‐chloro‐2,6‐dimethylpyrimidine molecule and a water molecule. The Zn^II atom adopts a distorted tetrahedral coordination geometry and is coordinated by four N atoms from the thiocyanate anions. The Zn^II atom is located on a special position (twofold axis of symmetry). The pyrimidinium cation and the pyrimidine molecule are not coordinated to the Zn^II atom, but are hydrogen bonded to the uncoordinated water molecules and the metal‐coordinated thiocyanate ligands. The pyrimidine molecules and pyrimidinium cations also form base‐pair‐like structures with an R₂²(8) ring motif via N—H…N hydrogen bonds. The crystal structure is further stabilized by intermolecular N—H…O, O—H…S, N—H…S and O—H…N hydrogen bonds, by intramolecular N—H…Cl and C—H…Cl hydrogen bonds, and also by π–π stacking interactions.     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Crystallization and morphology of poly(ethylene oxide‐b‐lactide) crystalline–crystalline diblock copolymers

The crystallization behaviors and morphology of asymmetric crystalline–crystalline diblock copolymers poly(ethylene oxide‐lactide) (PEO‐b‐PLLA) were investigated using differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD), and microscopic techniques (polarized optical microscopy (POM) and atomic force microscopy (AFM)). Both blocks of PEO₅‐b‐PLLA₁₆ can be crystallized, which was confirmed by WAXD, while PEO block in PEO₅‐b‐PLLA₃₀ is difficult to crystallize because of the confinement induced by the high glass transition temperature and crystallization of PLLA block with the microphase separation of the block copolymer. Comparing with the crystallization and morphology of PLLA homopolymer and differences between the two copolymers, we studied the influence of PEO block and microphase separation on the crystallization and morphology of PLLA block. The boundary temperature (T_b) was observed, which distinguishes the crystallization into high‐ and low‐temperature ranges, the growth rate and morphology were quite different between the ranges. Crystalline morphologies including banded spherulite, dendritic crystal, and dense branching in PEO₅‐b‐PLLA₁₆ copolymer were formed. The typical morphology of dendritic crystals including two different sectors were observed in PEO₅‐b‐PLLA₃₀ copolymer, which can be explained by secondary nucleation, chain growth direction, and phase separation between the two blocks during the crystallization process. Lozenge‐shaped crystals of PLLA with screw dislocation were also observed employing AFM, but the crystalline morphology of PEO block was not observed using microscopy techniques because of its small size. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1400–1411, 2008     

Zr(IV)‐Crosslinked Polyacrylamide/Polyanionic Cellulose Composite Hydrogels with High Strength and Unique Acid Resistance

Recently, metal coordination has been widely utilized to fabricate high‐performance hydrogels, but conventional metal‐based hydrogels face some drawbacks, such as staining or acid lability. In the present study, a novel kind of colorless Zr(IV)‐crosslinked polyacrylamide/polyanionic cellulose (PAM/PAC) composite hydrogel with unique acid resistance was constructed via acrylamide polymerization in a PAC solution, followed by posttreatment in a zirconium oxychloride (ZrOCl₂) solution. The prepared gels were characterized in terms of Fourier transform infrared spectroscopy, scanning electron microscopy, and tensile and compressive mechanics, as well as acid resistance. Inside the gels, the synergistic action of hydrogen bonding and Zr(IV) coordination is responsible for their improved mechanical properties and good energy dissipation ability. One hydrogel with nearly 90 wt % of water content can sustain approximately 5 MPa of compression stress at 90% strain without damage. Both microscopic network structures and macroscopic mechanics demonstrate facile adjustability via changing the PAC dosages in polymerization and/or ZrOCl₂ concentrations in posttreatment. Moreover, the gels present unexpected acid resistance due to the strong Zr(IV) coordination with PAC, demonstrating their potential application as hydrogel electrolytes in supercapacitors. The current work provides a new approach to fabricate metal coordination‐based high strength, colorless hydrogels with acid resistance. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 981–991     

FT-IR spectroscopic investigation of transition metal (II) 2-aminopyridine tetracyanonickelate complexes

A series of Hofmann-type clathrate host molecules containing two 2-aminopyridine (2-Apy) groups attached to transition metal (II) (M) tetracyanonickelate frame, with the formula: M(2Apy)₂Ni(CN)₄ (where M=Mn, Co, Cu or Zn), have been synthesised for the first time. Their FT-IR spectra are reported in the 400–4000 cm⁻¹ region. The spectral features suggest that the compounds are substantially isostructural to that of already known Hofmann type pyridine complex; M(py)₂Ni(CN)₄. Moreover, 2Apy pyridine molecules are found to involve coordination through the ring nitrogen. The coordination effect on the 2Apy modes was analysed.     

In vitro antibacterial and antifungal assay of poly‐(ethylene oxamide‐N,N′‐diacetate) and its polymer–metal complexes

A new polyester, poly‐(ethylene oxamide‐N,N′‐diacetate) (PEODA), containing glycine moiety was synthesized by the reaction of oxamide‐N,N′‐diacetic acid and ethylene glycol and its polymer–metal complexes were synthesized with transition metal ions. The monomer oxamide‐N,N′‐diacetic acid was prepared by the reaction of glycine and diethyl oxalate. The polymer and its metal complexes were characterized by elemental analysis and other spectroscopic techniques. The in vitro antibacterial activities of all the synthesized polymers were investigated against some bacteria and fungi. The analytical data revealed that the coordination polymers of Mn(II), Co(II) and Ni(II) are coordinated with two water molecules, which are further supported by FTIR spectra and TGA data. The polymer–metal complexes showed excellent antibacterial activities against both types of microorganisms; the polymeric ligand was also found to be effective but less so than the polymer–metal complexes. On the basis of the antimicrobial behavior, these polymers may be used as antifungal and antifouling coating materials in fields like life‐saving medical devices and the bottoms of ships. Copyright © 2007 John Wiley & Sons, Ltd.     

A novel octanuclear nickel(II)–molybdenum(VI) heterometallic cluster based on the salicylhydroxamate ligand

Salicylhydroxamic acid (H₃shi) is known for its strong coordination ability and multiple coordination modes, and can easily coordinate to metal cations to form compounds with five‐ or six‐membered rings, as well as mono‐, di‐ and multinuclear compounds with interesting structures having potential applications in organic chemistry, coordination chemistry, and the materials and biological sciences. A novel octanuclear nickel(II)–molybdenum(VI) heterometallic cluster based on the salicylhydroxamate ligand, namely di‐μ₃‐acetato‐di‐μ₂‐acetato‐di‐μ₃‐hydroxido‐di‐μ₃‐oxido‐tetraoxidooctakis(pyridine‐κN)bis(μ₅‐salicylhydroxamato)hexanickel(II)dimolybdenum(VI) monohydrate, [Mo₂Ni₆(C₇H₄NO₃)₂(C₂H₃O₂)₄O₅(OH)₂(C₅H₅N)₈]·H₂O, (I), was synthesized by the reaction of sodium molybdate, nickel acetate and salicylhydroxamic acid in a dimethylformamide/pyridine/methanol solution at room temperature. The salicylhydroxamate(3−) (shi³⁻), acetate and oxide ligands adopt complicated coordination modes and link six Ni^II and two Mo^VI cations into the octanuclear heterometallic cluster. All of the metal cations exhibit octahedral coordination geometries and are connected to each other through the sharing of corners, edges or planes. The heterometallic clusters are further connected to form two‐dimensional supramolecular layers through weak C—H…O hydrogen bonds. Studies of the magnetic properties of the title compound reveal antiferromagnetic interactions between the Ni^II cations.     

Sequential interpenetrating poly(ethylene glycol) hydrogels prepared by UV‐initiated thiol–ene coupling chemistry

Poly(ethylene glycol) (PEG)‐diallyls, ranging from 2 to 8 kDa, were successfully reacted with a trifunctional thiol crosslinker via thiol–ene coupling reaction to construct four different primary PEG hydrogels. These systems were used as scaffolds for the preparation of a library of sequential interpenetrating networks (SeqIPNs). The solid content of the secondary networks varied between 21 and 34% and was dependent on the length of the absorbing PEGs. The gel fractions for the IPNs were above 85%. Additionally, the lowest degree of swelling was found for the IPN based on 2‐kDa PEG (315%), whereas the 8‐kDa PEG IPN exhibited a value of 810%. The SeqIPN strategy facilitated hydrogel systems that cover a larger domain of tensile modulus (192–889 kPa) when compared with single hydrogel networks (175–555 kPa). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of poly(L‐lactic acid)–poly(ε‐caprolactone) multiblock copolymers by melt polycondensation

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(22) 5845 New multiblock copolymers derived from poly(L‐lactic acid) (PLLA) and poly(ε‐caprolactone) (PCL) were prepared with the coupling reaction between PLLA and PCL oligomers with ? NCO terminals. Fourier transform infrared (FTIR), ¹³C NMR, and differential scanning calorimetry (DSC) were used to characterize the copolymers and the results showed that PLLA and PCL were coupled by the reaction between ? NCO groups at the end of the PCL and ? OH (or ? COOH) groups at the end of the PLLA. DSC data indicated that the different compositions of PLLA and PCL had an influence on the thermal and crystallization properties including the glass‐transition temperature (T_g), melting temperature (T_M), crystallizing temperature (T_c), melting enthalpy (ΔH_m), crystallizing enthalpy (ΔH_c), and crystallinity. Gel permeation chromatography (GPC) was employed to study the effect of the composition of PLLA and PCL and reaction time on the molecular weight and the molecular weight distribution of the copolymers. The weight‐average molecular weight of PLLA–PCL multiblock copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL, whereas that of the homopolymer of PLLA was only 14,000. A polarized optical microscope was used to observe the crystalline morphology of copolymers; the results showed that all polymers exhibited a spherulitic morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5045–5053, 2004     

Two‐Dimensional Self‐Assembly of a Porphyrin–Polypyridyl Ruthenium(II) Hybrid on HOPG Surface through Metal–Ligand Interactions

The synthesis and self‐assembly behavior of porphyrin–polypyridyl ruthenium(II) hybrid, which consists of a flexible alkyl chain attached with two conjugated moieties is described. The electronic absorption spectrum and emission spectra show that the [C₈‐TPP‐(ip)Ru(phen)₂](ClO₄)₂, abbreviated as (C₈ip)TPPC has optical properties. Scanning tunneling microscopy (STM) studies found that the π–π interaction and metal–ligand interaction allow (C₈ip)TPPC to form self‐assembled structure and have an edge‐on orientation on the highly oriented pyrolytic graphite (HOPG) surface. The multidentate structure in (C₈ip)TPPC molecules act as linkers between the molecules and form metal–ligand coordination, which forces the assembly process in the direction of stable columnar arrays. In addition, although the sample was stored for two months in ambient conditions, STM experiments showed that the order of (C₈ip)TPPC self‐assembly only slightly decreased which indicates that the self‐assembled monolayer is stable. This work demonstrates that introducing a metal‐ligand in the porphyrin‐polypyridyl compound is a useful strategy to obtain novel surface assemblies.     

Interactions between metal chlorides and poly(vinyl pyrrolidone) in concentrated solutionsand solid‐state films

The rheological behavior of poly(vinyl pyrrolidone) (PVP)/N,N‐dimethylformamide (DMF) solutions containing metal chlorides (LiCl, CaCl₂, and CoCl₂) were investigated, and the results showed that the nature of the metal ions and their concentration had an obvious effect on the steady‐state rheological behavior of PVP–DMF solutions with different molecular weights. The apparent viscosity of the PVP–DMF solutions increased with an increasing metal‐ion concentration, and the viscosity increment was dependent on the metal‐ion variety_. For a CaCl₂‐containing PVP–DMF solution, for example, the critical shear rate at the onset of shear thinning became smaller with increasing CaCl₂ concentration. It was believed that multiple interactions among metal ions, carbonyl groups of PVP, and amide groups in DMF determined the solution properties of these complex fluids; therefore, ¹³C NMR spectroscopy was used to detect the interactions in systems of PVP–CaCl₂–DMF and PVP–LiCl–DMF solutions. NMR data showed that there were obvious interactions between the metal ions and the carbonyl groups of the PVP segments in the DMF solutions. Furthermore, IR spectra of the PVP/metal chloride composites demonstrated that the interaction between the metal ions and carbonyl groups in the PVP unit occurred and that the PVP chain underwent conformational variations with the metal‐ion concentration. DSC results indicated that the glass transition temperatures of the PVP/metal chloride composites increased with the addition of metal ions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1589–1598, 2007     

Metal‐Ion Metathesis in Metal–Organic Frameworks: A Synthetic Route to New Metal–Organic Frameworks

A porous metal–organic framework, Mn(H₃O)[(Mn₄Cl)₃(hmtt)₈] (POST‐65), was prepared by the reaction of 5,5′,10,10′,15,15′‐hexamethyltruxene‐2,7,12‐tricarboxylic acid (H₃hmtt) with MnCl₂ under solvothermal conditions. POST‐65(Mn) was subjected to post‐synthetic modification with Fe, Co, Ni, and Cu according to an ion‐exchange method that resulted in the formation of three isomorphous frameworks, POST‐65(Co/Ni/Cu), as well as a new framework, POST‐65(Fe). The ion‐exchanged samples could not be prepared by regular solvothermal reactions. The complete exchange of the metal ions and retention of the framework structure were verified by inductively coupled plasma–atomic emission spectrometry (ICP‐AES), powder X‐ray diffraction (PXRD), and Brunauer–Emmett–Teller (BET) surface‐area analysis. Single‐crystal X‐ray diffractions studies revealed a single‐crystal‐to‐single‐crystal (SCSC)‐transformation nature of the ion‐exchange process. Hydrogen‐sorption and magnetization measurements showed metal‐specific properties of POST‐65.     

Coordination Bonds and Diels–Alder Bonds Dual Crosslinked Polymer Networks of Self‐healing Polyurethane

A dual crosslinked self‐healing polyurethane was prepared with robust mechanical properties through the dynamic reversible pyridine‐Fe³⁺ coordination bonds and Diels–Alder (DA) covalent bonds dual crosslinking strategy. Moreover, the mechanical properties and self‐healing ability of polyurethane can be tuned readily by different ratio of the coordination bonds and DA bonds. Under external load, the coordination bonds serve as sacrificial bonds are broken to dissipate energy, the DA bonds can keep the shape of sample. With the coordination bonds participation, the damaged samples can be healed under moderate heating treatment or with the aid of FeCl₃ solution. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2228–2234     

Water de/adsorption associated with single‐crystal‐to‐single‐crystal structural transformation of a series of two‐dimensional metal–organic frameworks, [M(bipy)(C4O4)(H2O)2]·3H2O (M = Mn (1), Fe (2), and Zn (3), and bipy=4,4′‐bipyridine)

An assembly of three metal coordination polymers (CPs), [M(bipy)(C₄O₄)(H₂O)₂]·3H₂O (M = Mn ( 1 ), Fe ( 2 ), Zn ( 3 ), and bipy = 4,4′‐bipyridine, C₄O₄^2? (squarate) = dianion of H₂C₄O₄ (squaric acid)), was synthesized and structurally characterized. Single‐crystal X‐ray structural determination reveals that compounds 1 – 3 are iso‐structural, in which the M(II) ions are six‐coordinate in a distorted octahedral geometry. C₄O₄^2? and bipy both act as bridging ligands with bis‐monodentate coordination mode connecting the M(II) ions to form a two‐dimensional (2D) layered metal–organic framework (MOF). Adjacent 2D layers are then arranged in parallel and interpenetrated manners to construct their three‐dimensional (3D) supramolecular architecture. Compounds 1 , 2 , and 3 undergo two‐step dehydration processes with the first and second weight losses of 14.1 and 8.6% for 1 , of 12.1 and 7.5% for 2, and of 11.2 and 8.1% for 3 , respectively, corresponding to the weight losses of the three guest water molecules and the two coordinated water molecules, and all exhibit reversible sponge‐like water de/adsorption properties during de/rehydration processes for guest water molecules as per cyclic thermogravimetric analysis (TGA). The single‐crystal‐to‐single‐crystal (SCSC) structural transformation during the reversible de/rehydration processes of three guest water molecules was identified and monitored using exhaustive single‐crystal and powder X‐ray diffraction measurements.     

First‐row transition metal–pyridine (py)–sulfate [(py)xM](SO4) complexes (M = Ni,Cu and Zn): crystal field theory in action

The crystal structures of three first‐row transition metal–pyridine–sulfate complexes, namely catena‐poly[[tetrakis(pyridine‐κN)nickel(II)]‐μ‐sulfato‐κ²O:O′], [Ni(SO₄)(C₅H₅N)₄]_n, (1), di‐μ‐sulfato‐κ⁴O:O‐bis[tris(pyridine‐κN)copper(II)], [Cu₂(SO₄)₂(C₅H₅N)₆], (2), and catena‐poly[[tetrakis(pyridine‐κN)zinc(II)]‐μ‐sulfato‐κ²O:O′‐[bis(pyridine‐κN)zinc(II)]‐μ‐sulfato‐κ²O:O′], [Zn₂(SO₄)₂(C₅H₅N)₆]_n, (3), are reported. Ni compound (1) displays a polymeric crystal structure, with infinite chains of Ni^II atoms adopting an octahedral N₄O₂ coordination environment that involves four pyridine ligands and two bridging sulfate ligands. Cu compound (2) features a dimeric molecular structure, with the Cu^II atoms possessing square‐pyramidal N₃O₂ coordination environments that contain three pyridine ligands and two bridging sulfate ligands. Zn compound (3) exhibits a polymeric crystal structure of infinite chains, with two alternating zinc coordination environments, i.e. octahedral N₄O₂ coordination involving four pyridine ligands and two bridging sulfate ligands, and tetrahedral N₂O₂ coordination containing two pyridine ligands and two bridging sulfate ligands. The observed coordination environments are consistent with those predicted by crystal field theory.     

Nonisothermal crystallization behavior of the poly(ethylene glycol) block in poly(L‐lactide)–poly(ethylene glycol) diblock copolymers: Effect of the poly(L‐lactide) block length

The confined crystallization behavior, melting behavior, and nonisothermal crystallization kinetics of the poly(ethylene glycol) block (PEG) in poly(L ‐lactide)–poly(ethylene glycol) (PLLA–PEG) diblock copolymers were investigated with wide‐angle X‐ray diffraction and differential scanning calorimetry. The analysis showed that the nonisothermal crystallization behavior changed from fitting the Ozawa equation and the Avrami equation modified by Jeziorny to deviating from them with the molecular weight of the poly(L ‐lactide) (PLLA) block increasing. This resulted from the gradual strengthening of the confined effect, which was imposed by the crystallization of the PLLA block. The nucleation mechanism of the PEG block of PLLA15000–PEG5000 at a larger degree of supercooling was different from that of PLLA2500–PEG5000, PLLA5000–PEG5000, and PEG5000 (the numbers after PEG and PLLA denote the molecular weights of the PEG and PLLA blocks, respectively). They were homogeneous nucleation and heterogeneous nucleation, respectively. The PLLA block bonded chemically with the PEG block and increased the crystallization activation energy, but it provided nucleating sites for the crystallization of the PEG block, and the crystallization rate rose when it was heterogeneous nucleation. The number of melting peaks was three and one for the PEG homopolymer and the PEG block of the diblock copolymers, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3215–3226, 2006     

INFRARED ASSIGNMENT OF BIS(GLYCOLATO)-BIS(PYRIDINE) METAL(II) COMPOUNDS AND CRYSTAL STRUCTURE OF TRANS-BIS(GLYCOLATO)-CIS-BIS(PYRIDINE)NICKEL(II) DIHYDRATE

Abstract

Infrared spectra of the coordination compounds [MG₂(py)₂], M(II)=Co, Ni, Cu and Zn; G=glycolato, py=pyridine, have been fully assigned by means of py and py-d ₅ and glycolato α—OH and α—OD (G-d) labelling as well as metal ion substitution in the 4000–70cm^?1 region. The crystal structure of the Ni(II) compound is presented and the spectra of the compounds are discussed on the basis of their structure and their bonding to the glycolato and pyridine ligands. Vibrational frequencies obtained for the Ni(II) compound are compared to those obtained by calculations carried out using the Gaussian 94 program package.