Novel imidazolium‐based poly(ionic liquid)s: preparation,characterization, and absorption of CO2

The development of novel materials for carbon dioxide (CO₂) capture is of great importance in resource utilization and environmental preservation. In this study, imidazolium‐based ionic liquids (ILs) with symmetrical ester and hydroxyl groups were prepared, and their corresponding polymer were synthesized by melt condensation polymerization. The structure and properties of the poly(ionic liquid)s (PILs) were characterized by proton nuclear magnetic resonance, gel permeation chromatograph, differential scanning calorimetry, X‐ray diffraction, and scanning electron microscopy. In addition, the CO₂ sorption behavior of the IL monomers and PILs were studied at a low pressure (648.4 mmHg CO₂) and under a temperature of 25°C using a thermogravimetric analyzer. The CO₂ sorption capacity of 1,3‐bis(2‐hydroxyl ethyl)‐imidazolium hexafluorophosphate ([HHIm]PF₆, 10 mol%) was the highest among all the IL monomers and PILs studied. This capacity is also much higher than those reflected of previously reported ILs. Moreover, the sorption equilibrium of [HHIm]PF₆ was achieved within a short time. Copyright © 2011 John Wiley & Sons, Ltd.     

Imidazolium‐based poly(ionic liquid)s with poly(ethylene oxide) main chains: Effects of spacer and tail structures on ionic conductivity

Ten types of cationic glycidyl triazole polymers (GTPs) are prepared from combinations of five alkyl‐imidazolium units (methyl‐, ethyl‐, n‐propyl‐, iso‐propyl‐, and n‐butyl‐imidazoliums) and two spacers [di‐ and tri(ethylene glycol)s]. Since these poly(ionic liquid)s are prepared from the same sample of glycidyl azide polymer by postfunctionalization method, they have the same degree of polymerization. Therefore, the structure–property relationship can be discussed without influence of molecular weight difference. The samples are characterized by NMR, differential scanning calorimetry, and thermogravimetric analysis. The ionic conductivity data are obtained by impedance measurements. The GTPs with the tri(ethylene glycol) spacer and ethyl‐ and n‐butyl‐imidazolium units afford the highest anhydrous conductivity of 1.5 × 10^?5 S cm^?1 at 30 °C. Based on electrode polarization (EP) analysis, we calculate the conducting ion (carrier) concentration and mobility. We discuss the effect of the spacer and N‐alkyl tail structures on the ionic conductivity using the data obtained by EP analysis and X‐ray diffraction. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2896–2906     

Probing the effect of anion structure on the physical properties of cationic 1,2,3‐triazolium‐based poly(ionic liquid)s

To extensively explore the influence of anion structure on the physical properties of poly(ionic liquid)s (PILs) a series of PILs having main‐chain 1,2,3‐triazolium cations was synthesized via copper(I)‐catalyzed azide‐alkyne 1,3‐dipolar cycloaddition (CuAAC) followed by N‐alkylation with iodomethane and anion metathesis with different metal salts, that is, Li(CF₃SO₂)₂N, Li(CF₃CF₂SO₂)₂N, K(FSO₂)₂N, K(CF₃SO₂)N(CN), Ag(CN)₂N, and sodium 4,5‐dicyano‐1,2,3‐triazolate. To isolate the effect of anion on physical properties of PILs, a common iodide precursor was used to maintain constant the average degree of polymerization (DP_n) and chain dispersity. Detailed structure/properties relationship analyses demonstrated a lack of correlation between anion chemical structure, ionic conductivity, and glass transition temperatures. Among synthesized series, the PIL derivative having bis(trifluoromethylsulfonyl)imide counter anion showed the best compromise in performance: low glass transition temperature (T_g = ?68 °C), high thermal stability (T_onset = 340 °C) and superior ionic conductivity (σ_DC = 8.5 × 10^{? 6} S/cm at 30 °C), which makes it an interesting candidate for various key modern electrochemical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2191–2199     

聚季铵盐离子液体材料制备及其对蛋白质吸附性能评价

通过一步合成法制备了两种可聚合季铵盐离子液体功能单体,并通过沉淀聚合法合成了相应的聚离子液体聚合物。对产物进行了核磁共振、扫描电镜、热重分析等表征。结果表明:所制备的两种材料粒径均匀,约为600 nm的椭球形颗粒,颗粒之间有相互粘连。通过对牛血清白蛋白(BSA)、卵清蛋白(OVA)、牛血红蛋白(BHb)、溶菌酶(Lys)、胰蛋白酶(Try)5种蛋白质的吸附性能实验,考察了聚季铵盐离子液体材料对蛋白质的吸附性能。考察结果表明:两种聚离子液体材料均对蛋白质具有一定的吸附性能。其中以4-乙烯基苄氯季铵盐离子液体为功能单体制备的聚离子液体材料对胰蛋白酶的吸附性能最好,是一种具有良好应用前景的材料。     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008     

Morphological change of thermosensitive imidazolium‐based poly(ionic liquid)/poly(phenylethylmethacrylate) composite particles

Composite particles comprising poly(2‐phenylethyl methacrylate) (PPhEMA) and imidazolium‐based poly(ionic liquid)s were prepared by suspension polymerization of 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide as an ionic liquid monomer with dissolved PPhEMA. Not only PPhEMA exhibits lower critical solution temperature (LCST) behavior in 1‐vinyl‐3‐ethylimidazolium bis(trifluoromethanesulfonyl)amide but also the polymer blend in the bulk state exhibited LCST behavior. However, the composite polymer particles obtained after polymerization at 70°C maintained a homogeneous inner structure after heat treatment as the polymerization temperature was greater than the LCST in this system due to the formation of a cross‐linked structure during polymerization. When the composite particles were prepared by suspension polymerization at 30°C, their inner morphology changed from homogeneous to phase separated during the subsequent heat treatment. Moreover, the morphology transformation of the composite particles was dependent on the PPhEMA molecular weight. Copyright © 2016 John Wiley & Sons, Ltd.     

Poly(ionic liquid)s derived from 3‐octyl‐1‐vinylimidazolium bromide and N‐isopropylacrylamide with tunable properties

A new series of linear and crosslinked copolymers, obtained from 3‐octyl‐1‐vinylimidazolium bromide (VImBr) and N‐isopropylacrylamide (NIPAAm), were prepared by radical polymerization. Namely, VImBr was synthesized from 1‐bromooctane and an ionic liquid such as 1‐vinylimidazole. NIPAAm was used because it gives raise to well known thermoresponsive (co‐)polymers. The copolymers were thoroughly characterized by means of ¹H NMR and ¹³C NMR spectroscopies. Besides, differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy were also used. Moreover, the swelling behavior and the thermoresponsive properties of the corresponding hydrogels were studied. It was found that the VImBr incorporation into the copolymers does have a dramatic influence on both the thermal properties of the dried materials and the lower critical solution temperature of the corresponding hydrogels. In detail, the glass transition temperature was dependent on the monomer ratios, and ranged from 5 to 155 °C. Analogously, the lower critical solution temperature of the resulting hydrogels ranged from less than 10 up to 38 °C, thus including the physiological temperature. NMR spectroscopies, which were performed on the linear polymers, indicated that the monomers exhibit an alternating tendency resulting in a microstructure in which blocks are not present, at least when the two monomers are in equimolar amounts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3521–3532     

Electrochemically controlled detection of adrenaline on poly(2‐aminobenzylamine) thin films by surface plasmon resonance spectroscopy and quartz crystal microbalance

In this study, we present an electrochemically controlled surface plasmon resonance (EC‐SPR) biosensor to detect adrenaline on poly(2‐aminobenzylamine) (P2ABA) thin films. The P2ABA thin films are stable and display electroactivity in a neutral PBS solution. Specific detection of adrenaline was performed on P2ABA thin films because the benzylamine groups in the P2ABA structure could specifically react with adrenalines. Adrenaline was detected in real time by EC‐SPR spectroscopy, which provides an EC‐SPR reflectivity change on the P2ABA thin film upon adrenaline injection. The measured responses were quite different from those for uric acid and ascorbic acid, which are major interferences in adrenaline detection. The electrochemically applied potential facilitates the specific detection of adrenaline. In addition, the detection of adrenaline on the P2ABA thin films was investigated by a quartz crystal microbalance technique. The detection limit for adrenaline at open circuit potential was 10 pM. The present study provides a useful information on the detection of adrenaline on the P2ABA thin films. Copyright © 2013 John Wiley & Sons, Ltd.     

Highly efficient flame retardant poly(lactic acid) using imidazole phosphate poly(ionic liquid)

Because of good thermal stability, nonflammability and rich structural designability, ionic liquids (ILs) have been used as flame retardants for poly(lactic acid) (PLA). However, as a small molecule, IL has the disadvantages of poor thermal stability and water resistance, and so on. In this paper, an imidazole‐type poly(ionic liquid) (PIL) containing a phosphate anion was synthesized using 1‐vinylimidazole, triethyl phosphate, and 1,2‐divinylbenzene and marked as PDVE[DEP]. The PDVE[DEP] was used to improve the flame retardancy of PLA. The flame retardancy and thermal degradation behaviors of PLA/PDVE[DEP] composites were investigated by the limited oxygen index (LOI), UL‐94 vertical burning, cone calorimetry, and thermal gravity analysis, and so on. The results showed that only 1.0 wt% PDVE[DEP] allows PLA to achieve the UL‐94 V0 rating and obtain LOI value 25.6 vol%. The PDVE[DEP] improve the flame retardancy of PLA by melting‐away mode. In addition, it catalyzes the transesterification of PLA and changes the degradation products.     

Accelerating Crystallization of Open Organic Materials by Poly(ionic liquid)s

The capability to significantly shorten the synthetic period of a broad spectrum of open organic materials presents an enticing prospect for materials processing and applications. Herein we discovered 1,2,4-triazolium poly(ionic liquid)s (PILs) could serve as a universal additive to accelerate by at least one order of magnitude the growth rate of representative imine-linked crystalline open organics, including organic cages, covalent organic frameworks (COFs), and macrocycles. This phenomenon results from the active C5-protons in poly(1,2,4-triazolium)s that catalyze the formation of imine bonds, and the simultaneous salting-out effect (induced precipitation by decreasing solubility) that PILs exert on these crystallizing species.     

Ion transport and relaxation in phosphonium poly(ionic liquid) homo- and co-polymers

In the present work, a poly(ionic liquid) (PIL), poly(triphenyl-4-vinylbenzylphosphonium chloride) and a series of its random copolymers with nonionic hydrophobic poly(methyl methacrylate) (PMMA) are synthesized by conventional free radical polymerization (CFRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization. The understanding of some fundamental aspects about ion transport and relaxation mechanism in PIL and PIL copolymers are investigated using dielectric spectroscopy via several theoretical models. The influence of copolymer compositions, physical blending of neat PIL and PMMA, size of counter anions (Cl⁻ and TFSI⁻) and variation of molecular weights on thermal stability, moisture sensitivity, ionic transport and relaxation properties are also studied. An enhancement of thermal stability and ionic transport property of the PIL copolymer is observed compared to those of the physically mixed blend of two homopolymers with same compositions. The incorporation of hydrophobic PMMA segment definitely decreases the moisture content in PIL copolymers than the PIL itself. In all these PIL- based systems, the temperature dependence of ionic conductivity, relaxation time and ion diffusivity are well described by Vogel-Tammann-Fulcher model. The studies of some fundamental properties of these new PIL copolymers with less moisture sensitivity may help in using them as potential polymer electrolytes in energy storage devices.     

Tuning the glass transition of siloxane-based poly(ionic liquid)s towards high ion conductivity

Herein, we report a simple and versatile synthetic approach towards siloxane-based poly(ionic liquid)s (PILs) with unusually low glass transition temperatures (T_g) down to −73°C, and thus “liquid-like” behavior at room temperature. We designed a polydimethylsiloxane-derived copolymer carrying dialkylimidazolium moieties, and by careful selection of the side-chain length and the type of anions we were able to manipulate its T_g over a wide range and reach high ionic conductivities (σ_DC) up to 4.8 × 10⁻⁵ S/cm at 300 K. The ionized species make up only a minor fraction (<25 mol%) of the overall repeating units and are supposedly randomly distributed: Yet our results indicate dramatic effects on the thermal properties due to repulsive interactions between ionic and non-ionic segments.     

Thin poly(ionic liquid) and poly(vinylidene fluoride) blend films with ferro‐ and piezo‐electric polar γ‐crystals

Ferro‐ and piezo‐electric poly(vinylidene fluoride) (PVDF) thin film is reported to be obtained by using a poly(ionic liquid) (PIL) [poly(2‐(dimethylamino)ethyl methacrylate) methyl chloride quaternary salt] through solution route. The short range interactions between localized cationic ions of PIL and polar >CF₂ of PVDF are responsible for modified polar γ‐PVDF (T₃GT₃Ḡ) formation. Modification in chain conformation of PVDF is confirmed by FTIR, XRD, and DSC studies suggesting the miscible PVDF–PIL (PPIL) blend. Up to 40 wt % loading of PIL in PVDF matrix enhances relative intensity of γ‐phase up to 50% in the entire crystalline phase. The P‐E hysteresis loop of PVDF‐PIL blends at 25 wt % PIL loading (PPIL‐25) thin film at sweep voltage of ±50 V shows excellent ferroelectric property with nearly saturated high remnant polarization ∼6.0 µC cm⁻² owing to large proportion of γ‐PVDF. However, non‐polar pure PVDF thin film shows unsaturated hysteresis loop with 1.4 µC cm⁻² remnant polarization. The operation voltage decreases effectively because of the polar γ‐phase formation in PPIL blended film. High‐sensitivity piezo‐response force microscopy shows electromechanical switching property at low voltages in PPIL‐25 thin films through local switching measurements, making them potentially suitable as ferroelectric tunnel barriers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 795–802     

Transport of ionic charge and solvent in poly(3-octylthiophene) films: An electrochemical quartz crystal microbalance study

The results of a study of poly(3-octylthiophene) films with the aid of an electrochemical quartz microbalance are presented. The effect of the nature of the electrolyte anion on the determined weights of mobile species that are transported through the film/electrolyte interface is discussed. The obtained results point to a substantial role played by the solvent transport in the course of the electrode reaction. The results concerning the influence exerted by the electrode material on the observed regularities are presented.     

Crystallization and crystal structure of poly(ester amide)s derived from L‐tartaric acid

The crystal structure and crystallization behavior of a series of poly(ester amide)s derived from L ‐tartaric acid, 1,6‐hexanediamine, and 6‐amino‐1‐hexanol were examined. The study included aregic polymers containing 5, 10, and 20% of ester groups in addition to the syndioregic polymer containing equal amounts of amide and ester groups. X‐ray diffraction data revealed that all the aregic poly(ester amide)s adopt the same crystal structure as the parent polyamide made of L ‐tartaric acid, and 1,6‐hexanediamine. In this structure, chains are slightly compressed and arranged as in the α‐form of nylon 66. Solid‐state nuclear magnetic resonance (NMR) revealed that ester groups are excluded from the crystal phase except for the case of the syndioregic polymer. Isothermal crystallization kinetics was analyzed according to the Avrami theory. Crystallization rates were found to decrease regularly with increasing contents in ester groups and with increasing crystallization temperature. Avrami exponent values close to 2 were found whereas spherulitic morphologies were observed by optical microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 116–125, 2007     

Supramolecular assembly of poly(ionic liquid) nanogel driven by host‐stabilized charge transfer interaction

Poly(ionic liquid) (PIL)‐based nanogels, functionalized by naphthyl (Np), are fabricated via a facile one‐step ternary crosslinking copolymerization in selective solvent. The size of PIL nanogels can be conveniently regulated through the feed ratio of IL monomer to crosslinker. The presence of Np groups in PIL nanogel is confirmed by using ultraviolet–visible (UV–vis), Fourier transform infrared, and X‐ray photoelectron spectroscopy measurements. Through introducing cucurbit[8]uril (CB[8]) and bisviologen compound (DEDV) as the host molecule and electron acceptor, respectively, host‐stabilized charge transfer (HSCT) interaction is achieved through utilizing Np containing PIL nanogel as the building block. The studies reveal that PIL nanogels can form schistose aggregates in the scale of micrometer via HSCT interaction. The aggregates will be broken in the presence a competitive guest molecule (amantadine) and can recover by adding another host molecule (CB[7]). HSCT interaction among CB[8], DEDV and PIL nanogel is investigated by dynamic light scattering, UV–vis, and Proton nuclear magnetic resonance. Our studies thus provided an applicable strategy for constructing dynamic polymer nanoparticles through noncovalent interaction. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2251–2259     

Transition phenomenon of immersion-angle dependence of quartz crystal microbalance in Newtonian liquid

The present work reports the new effects of the immersion-angle dependence of the resonant-frequency shift (ΔF) of the one-face sealed quartz crystal microbalance (QCM) in a Newtonian liquid. The immersion-angle dependence of ΔF appears below the sucrose concentration of 12 wt.%. However, we found that the transition phenomenon of ΔF occurs between 12 and 20 wt.% and then the immersion-angle dependence of ΔF disappears above 20 wt.% (finally, the ΔF values above 20 wt.% are equal to those of 90° in all immersion angles). In order to obtain further insights into the transition phenomenon and the disappearance of the immersion-angle dependence of ΔF, we investigated the immersion-angle dependence of the electrolytic solution, i.e., NaCl solution. This investigation indicated that this monovalent electrolytic solution causes the immersion-angle dependence but not the transition phenomenon and the disappearance of the immersion-angle dependence of ΔF. On the basis of these results, we suggest that the non-charge of the molecule is the important element to generate the transition phenomenon and the disappearance of the immersion-angle dependence of ΔF.     

Poly(ionic liquid)s based on imidazolium hydrogen carbonate monomer units as recyclable polymer‐supported N‐heterocyclic carbenes: Use in organocatalysis

Synthesis of novel poly(ionic liquid)s, namely, poly(1‐vinyl‐3‐alkylimidazolium hydrogen carbonate)s, denoted as poly([NHC(H)][HCO₃])s or PVRImHCO₃, where R is an alkyl group (R = ethyl, butyl, phenylethyl, dodecyl), is described. Two distinct synthetic routes were explored. The first method is based on the free‐radical polymerization (FRP) of 1‐vinyl‐3‐alkylimidazolium monomers featuring a hydrogen carbonate counter anion (HCO₃^?), denoted as VRImHCO₃. The latter monomers were readily synthesized by alkylation of 1‐vinylimidazole (VIm), followed by direct anion exchange of 1‐vinyl‐3‐alkylimidazolium bromide monomers (VRImBr), using potassium hydrogen carbonate (KHCO₃) in methanol at room temperature. Alternatively, the same anion exchange method could be applied onto FRP‐derived poly(1‐vinyl‐3‐alkylimidazolium bromide) precursors (PVRImBr). All PVRImHCO₃ salts proved air stable and could be manipulated without any particular precautions. They could serve as polymer‐supported precatalysts to generate polymer‐supported N‐heterocyclic carbenes, referred to as poly(NHC)s, formally by a loss of “H₂CO₃” (H₂O +CO₂) in solution. This was demonstrated through selected organocatalyzed reactions of molecular chemistry, known as being efficiently mediated by molecular NHC catalysts, including benzoin condensation, transesterification and cyanosilylation of aldehyde. Of particular interest, recycling of the polymer‐supported precatalysts was possible by re‐carboxylation of in situ generated poly(NHC)s. Organocatalyzed reactions could be performed with excellent yields, even after five catalytic cycles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4530–4540