Metal‐ and solvent‐free,clickable synthesis and postpolymerization functionalization of poly(triazole)s

In this study, a series of linear poly(triazole)s (PTAs) were successfully synthesized by the metal‐ and solvent‐free, thermal click polymerization of diazide and dialkyne (A₂ + B₂) monomers. All click polymerizations proceeded smoothly at 80 °C in an open atmosphere without protection from oxygen and moisture. After being polymerized for 36 h, the crude polymer was further fractionated into three fractions using a multistep precipitation method. By selectively choosing precipitating agents, this process produced poly(triazole) fractions with low polydispersity index (<1.30). The resulting PTAs are soluble in common organic solvents and stable at a temperature up to 320 °C. Furthermore, the methyl benzoate moieties in the main chain can serve as useful building blocks for further postpolymerization functionalization, yielding 1,2,4‐triazole derivatives. This functionalization strategy offers potential for the development of novel triazole‐based materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermal and acid labile polyurethanes as a new class of responsive materials in polymeric nanoparticles and nanocapsules

A new class of polyurethanes has been designed, containing tertiary carbamate groups in the main chain of the polymer, which enable the resulting polymer to degrade completely under acid and thermal treatment. The decomposition temperatures of the polymers were determined by measuring the evolution of carbon dioxide and other decomposition products using TGA‐MS. Until decomposition of the polymer, no glass transition was found. The polymers exhibit excellent solubility in common organic solvents like chloroform and tetrahydrofuran, making them to suitable materials for film formation. From the obtained polymers, nanoparticles were synthesized by the solvent evaporation method combined with the miniemulsion technique. The resulting nanoparticles can be used as intelligent fillers in films and sensors, since they degrade at temperatures of above 180 °C, which can be detected by a color change reaction with ninhydrin. Polymeric nanocapsules were prepared by an interfacial polyaddition reaction from 2,4‐toluene diisocyanate and tertiary diols performed at the droplet's interface in inverse (water‐in‐oil) miniemulsions. These nanocapsules with an encapsulated photoacid generator can act as a release system, whereby an acidic release through irradiation with ultraviolet light can be triggered. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

End‐group modified poly(methyl vinyl ether): Characterization and LCST demixing behavior in water

A range of hydrophilic poly(methyl vinyl ether) (PMVE) polymers was synthesized by living cationic polymerization of methyl vinyl ether (MVE), having different hydrophilic or hydrophobic chain‐end functionalities. The dissimilar end‐groups were either introduced by end‐capping of the growing polymer chain with LiBH₄, methanol, and water or by functional initiation with 2‐bromo‐(3,3‐diethoxy‐propyl)‐2‐methylpropanoate. The synthesized PMVEs were characterized by ¹H NMR, size exclusion chromatography, and matrix‐assisted laser desorption ionization time of flight, displaying a narrow polydispersity. Modulated temperature DSC was applied to study the influence of the nature of the end‐groups on the solubility behavior of PMVE in water. Terminal‐modification with a hydroxyl function improves the solubility, whereas a Br‐containing end‐group causes the polymer to be insoluble in water at room temperature; however, the special type III lower critical solution temperature demixing behavior being maintained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 461–469, 2006     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An H‐shaped polymer bonding β‐cyclodextrin at branch points: Synthesis and influences of attached β‐cyclodextrins on physical properties

We report on the synthesis of an H‐shaped polymer bonding β‐cyclodextrin (β‐CD) at branch points and influences of attached β‐CD on physical properties. First, a poly(ethylene glycol)(PEG)‐based functional macroinitiator bearing two azidos and four chlorines at chain‐ends (PEG‐2N₃(‐4Cl)) was prepared via terminal modification reactions. Then, PEG‐2N₃(‐4Cl) was applied to initiate the atom transfer radical polymerization of N‐isopropylacrylamide, leading to the synthesis of an H‐shaped block polymer with PEG as the central chain and poly(N‐isopropylacrylamide) (PNIPAM) as side‐arms (PEG‐2N₃(‐4PNIPAM)). Azido groups were at the branch points of the polymer. Finally, the click reaction between PEG‐2N₃(‐4PNIPAM) and alkynyl monosubstituted β‐cyclodextrin (β‐CD) afforded another H‐shaped polymer with two β‐CDs bonding at the polymer branch points (PEG‐2CD(‐4PNIPAM)). The glass transition temperature (T_g) and lower critical solution temperature (LCST) of the H‐shaped polymer increased after the attachment of β‐CD. The self‐assembly and thermal responsive behaviors, as well as the encapsulation behaviors of PEG‐2CD(‐4PNIPAM) were also altered. When temperature was below the LCSTs, PEG‐2N₃(‐2PNIPAM) dissolved in water molecularly, whereas PEG‐2CD(‐4PNIPAM) could self‐assemble into nano‐sized micelles. After the LCST transitions, PEG‐2N₃(‐4PNIPAM) aggregated into micron‐sized unstable particles, whereas PEG‐2CD(‐4PNIPAM) transformed into PNIPAM‐cored nanomicelles. Besides, PEG‐2CD(‐4PNIPAM) can encapsulate doxorubicin below its LCST due to the formation of micelles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of allyl end‐block functionalized poly(ε‐caprolactone)s and their facile post‐functionalization via thiol–ene reaction

A simple and facile strategy for the functionalization of commercial poly(ε‐caprolactone) diols (PCLs) with pendant functionalities at the polymer chain termini is described. Well‐defined allyl‐functionalized PCLs with varying numbers of allyl end‐block side‐groups were synthesized by cationic ring‐opening polymerization of allyl glycidyl ether using PCL diols as macroinitiators. Further functionalization of the allyl‐functionalized PCLs was realized via the UV‐initiated radical addition of a furan‐functionalized thiol to the pendant allyl functional groups, showing the suitability for post‐modification of the PCL materials. Changes in polymer structure as a result of varying the number of pendant functional units at the PCL chain termini were demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 928–939     

A facile synthesis of catechol‐functionalized poly(ethylene oxide) block and random copolymers

Herein we develop a facile synthetic strategy for the functionalization of well‐defined polyether copolymers with control over the number and location of catechol groups. Previously, the functionalization of polyethylene oxide (PEO)‐based polymers with catechols has been limited to functionalization of the chain ends only, hampering the synthesis of adhesive and antifouling materials based on this platform. To address this challenge, we describe an efficient and high‐yielding route to catechol‐functionalized polyethers, which could allow the effects of polymer architecture, molecular weight, and catechol incorporation on the adhesive properties of surface‐anchored PEO to be studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2685–2692     

Smart photoluminescent nanohybrids based on CdSe quantum dots capped with multidentate thiolated pH‐responsive and thermoresponsive polymers for nanosensing

Well‐defined thermoresponsive polymers obtained by the atom transfer radical polymerization (ATRP) of short oligo(ethylene glycol) methyl ether methacrylates (MEO_nMA, n = 2, 3, or 8) with small ratios of a thiolated comonomer, 2‐(acetylthio)ethylmethacrytale, can replace the hydrophobic trioctylphosphine oxide (TOPO) capping of CdSe quantum dots (QDs). After this facile ligand exchange, the mild hydrolysis of the acetylthiol group into thiol is the key to enhance the QD luminescence. However, the length of the ethylene glycol side chain is critical for the success of the functionalization; it is established that the shortest MEO₂MA‐based copolymers result in a compact coating and a highest quantum yield (up to a factor of 6) when compared with that of CdSe@TOPO in dichloromethane. In addition, the amphiphilic character of the copolymer allows the CdSe@P(MEO_nMA‐co‐SEMA) nanohybrids to disperse in water. On the other hand, the residual ionizable thiol groups do not get attached to the QD surface, cause that the lower critical solubility temperature of the polymer depends on pH as well. Thus, at acidic pH, an abrupt increase in the luminescence emission accompanies the polymer collapse, which establishes the promise of these hybrids as temperature/pH nanosensors and targeted drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3087–3095     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of new aromatic polyamides bearing crown ethers or their dipodal counterparts in the pendant structure. I. Benzo‐12‐crown‐4 and ortho‐bis(2‐ethoxyethoxy)benzene

Two novel isophthalic diacid‐based monomers have been synthesized by inclusion in ring position 5 of a functionalized benzoylamine moiety. The functionalization includes a 12‐crown‐4 ether group fused with the benzene subunit and a dipodand substructure, formally a disubstitution of the benzene ring, with two sequences of ethyl‐terminated ethylene oxide units, which represent the open‐chain counterpart of the alicylic crown moiety. The polycondensation of the two diacids with five aromatic diamines yielded 10 new polyamides with crown or podand pendant substructures. The polyamides had previously been chemically characterized by NMR, IR, and elemental analysis. The polymers showed high glass transition temperatures of up to 349 °C, good thermal stability (T_{donset, N2} ≈ 400 °C), and improved solubility in organic solvents. The presence of acyclic or alicyclic oxyethylene sequences as crown ether or podand substructures and an additional amide side group per repeat unit made the polymers essentially amorphous and improved their water absorption ability in comparison with nonsubstituted polyamides. Water uptake values as high as 12% were observed at 65% relative humidity. All the polyamides showed a good film‐forming ability, and the mechanical properties of these films are considered to be satisfactory for experimental aromatic polyamides. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2270–2281, 2006     

End‐group functionalization and postpolymerization modification of helical poly(isocyanide)s

This contribution presents the synthesis of helical alkyne‐terminated polymers using a functionalized Nickel complex to initiate the polymerization of menthylphenyl isocyanides. The resulting polymers display low dispersities and controlled molecular weights. Copper‐catalyzed azide/alkyne cycloadditions (CuAAC) are performed to attach various azide‐containing compounds to the polymer termini. After azido‐phosphonate moiety attachment the polymer displays a signal at 25.4 ppm in the ³¹P NMR spectrum demonstrating successful end‐group functionalization. End‐group functionalization of a fluorescent dye allows to determine the functionalization yield as 89% (±8). Successful ligation of an azide‐functionalized peptide sequence (M_KLA = 1547 g/mol) increases the M_n from 5100 for the parent polymer to 6700 for the bioconjugate as visualized by GPC chromatography. Analysis by CD spectroscopy confirms that the helical conformation of the poly(isocyanide) block in the peptide–polymer conjugate is maintained after postpolymerization modification. These results demonstrate an easy, generalizable, and versatile strategy toward mono‐telechelic helical polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2766–2773     

Effects of carbon nanotubes on polymer physics

A single carbon nanotube has many similarities with an individual polymer chain including the fact that the end‐to‐end length of both are often about the same and the diameter of the chain is about the same (for single‐walled nanotubes) or only ～10 to 20 times larger (for multiwalled nanotubes). The combination of the solid surface and the similarity of the two materials means that polymer physics are altered in manners not seen with any other type of commonly used filler. The purpose of this review is to update a chapter that appears in a recent tome by Grady (2011) and describe how polymer physics is altered in composites that contain carbon nanotubes. Subjects that will be discussed include chain configuration, glass transition, polymer diffusion, unit cells and crystalline superstructure (lamellae, spherulites and shish‐kebabs), and crystallization kinetics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

The use of poly(alkylene oxide)s to achieve fast and controlled photochromic switching in rigid matrices

We report a conjugation system for the enhancement of photochromic dye performance in rigid matrices using widely available, cheap, chemically robust and compatible polymeric starting materials, namely poly(propylene oxide) (PPO) and poly(1,2‐butylene oxide). Conjugation of these soft (low T_g) polymers to an indeno‐fused naphthopyran photochromic dye, in a telechelic geometry, gives access to a wide range of accelerated and tuned fade speeds (decoloration) via variation in molecular weight. The t_1/2 and t_3/4 fade speeds for PPO conjugates (polymer molecular weights ranging between ca. 425 and 2000) are accelerated by 35–58 and 51–76%, respectively, compared with the nonconjugated control dye. Longer oligomers provide faster decoloration approaching that obtained in solution. The stability of the polyethers allows functionalization using a wide variety of chemistries, including harsh acid catalyzed transformations, providing an overall facile synthesis of photochromic dye‐polymer conjugates in high yield and purity. In addition, these polymers give easy access to conjugates with star‐type architectures, which provide an even further improvement in performance compared with their linear counterparts with less conjugated polymer needed per dye to achieve a given fade speed. © 2012 Commonwealth of Australia. J Polym Sci Part A: Polym Chem, 2012     

Chain center‐functionalized amphiphilic block polymers: Complementary hydrogen bond self‐assembly in aqueous solution

Hydrogen bonding self‐assemblies were formed in an aqueous medium from a pair of an amphiphilic ABA triblock copolymer and a hydrophobic homopolymer, both with a triple hydrogen bonding site that was complementary to each other and precisely placed at the main‐chain center: (PEGMA)_m–(MMA)_n– ADA –(MMA)_n–(PEGMA)_m and (MMA)_p– DAD –(MMA)_p ( A = hydrogen acceptor; D = hydrogen donor; PEGMA: PEG methacrylate; MMA: methyl methacrylate). The polymers were synthesized by the ruthenium‐catalyzed living radial polymerization with bifunctional initiators (Br– ADA –Br and Cl– DAD –Cl) aiming at pinpoint chain center functionalization to give a symmetric segmental sequence; ADA and DAD initiators were derived from 2,6‐diaminopyridine and thymine, respectively. On mixed equimolar in tetrahydrofuran (THF), both polymers spontaneously associated, and the apparently 1:1 assembly further grew into higher aggregate particles on subsequent addition of water. The aggregates in water/THF were relatively stable and uniform in size, which most likely stems from the intermolecular complementary hydrogen bond interaction at polymer chain centers. In sharp contrast, an equimolar mixture of ADA ‐block polymer and DAD ‐free poly(MMA) in water/THF resulted in larger and irregular particles, and thus short‐lived to eventually collapse. These results indicate that, however structurally marginal, precise pinpoint functionalization of macromolecular chains allows stable self‐assemblies via complementary hydrogen bond interaction even in aqueous media. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4498–4504     

Introducing a new triazoloquinoxaline‐based fluorene copolymer for organic photovoltaics: Synthesis,characterization, and photovoltaic properties

A new donor‐acceptor copolymer consisting of triazoloquinoxaline and 9,9‐dialkylfluorene units on the main chain has been synthesized, characterized and evaluated as donor material in bulk heterojunction solar cells using PC₆₁BM as an acceptor. The resulting polymer PTQF showed good thermal stability and solubility in common organic solvents. Cyclic Voltammetry measurements showed that the PTQF has HOMO–LUMO energy levels of ?5.13 and ?3.62 eV, respectively. DFT calculations revealed that the HOMO is delocalized all over the thiophene and fluorene units and the LUMO is localized mainly on the triazole and pyrazine units. PTQF absorbs broadly in the visible region and exhibits a bandgap of 1.4 eV. Photovoltaic devices exhibited 1.7% efficiency for 1:2 PTQF:PC₆₁BM blend ratio using Ca/Ag electrodes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of pyrene bearing amphiphilic miktoarm star polymer and its noncovalent interactions with multiwalled carbon nanotubes

A novel amphiphilic miktoarm star polymer, polystyrene‐poly(ethylene glycol)‐poly(methyl methacrylate), bearing a pyrene group at the end of PS arm (Pyrene‐PS‐PEG‐PMMA) was successfully synthesized via combination of atom transfer radical polymerization and click chemistry. The structure and composition of the amphiphilic miktoarm star polymer were characterized by gel permeation chromatography and ¹H NMR. The functionalization of multiwalled carbon nanotubes (MWCNTs) via “π–π” stacking interactions with pyrene‐PS‐PEG‐PMMA miktoarm star polymer was accomplished and the resulting polymer‐MWCNTs hybrid was analyzed by using ¹H NMR, UV–vis, fluorescence spectroscopy, and thermal gravimetric analysis. The high‐resolution transmission electron microscopy and analytical techniques aforementioned confirmed that the noncovalent functionalization of MWCNT's with the amphiphilic miktoarm star polymer was successfully achieved. The MWCNT/pyrene‐PS‐PEG‐PMMA exhibited significant dispersion stability in common organic solvents such as dimethyl formamide, chloroform, and tetrahydrofuran. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of a multiarm poly(acrylic acid) star polymer for application in sustained delivery of cisplatin and a nitric oxide prodrug

Functionalized polymeric nanocarriers have been recognized as drug delivery platforms for delivering therapeutic concentrations of chemotherapies. Of this category, star‐shaped multiarm polymers are emerging candidates for targeted delivery of anticancer drugs, due to their compact structure, narrow size distribution, large surface area, and high water solubility. In this study, we synthesized a multiarm poly(acrylic acid) star polymer via macromolecular design via the interchange (MADIX)/reversible addition fragmentation chain transfer (MADIX/RAFT) polymerization and characterized it using nuclear magnetic resonance (NMR) and size exclusion chromatography. The poly(acrylic acid) star polymer demonstrated excellent water solubility and extremely low viscosity, making it highly suited for targeted drug delivery. Subsequently, we selected a hydrophilic drug, cisplatin, and a hydrophobic nitric oxide (NO)‐donating prodrug, O²‐(2,4‐dinitrophenyl) 1‐[4‐(2‐hydroxy)ethyl]‐3‐methylpiperazin‐1‐yl]diazen‐1‐ium‐1,2‐diolate, as two model compounds to evaluate the feasibility of using poly(acrylic acid) star polymers for the delivery of chemotherapeutics. After synthesizing and characterizing two poly(acrylic acid) star polymer‐based nanoconjugates, poly(acrylic acid)–cisplatin (acid–Pt) and poly(acrylic acid–NO (acid–NO) prodrug, the in vitro drug release kinetics of both the acid–Pt and the acid–NO were determined at physiological conditions. In summary, we have designed and evaluated a polymeric nanocarrier for sustained‐delivery of chemotherapies, either as a single treatment or a combination therapy regimen. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and encapsulation properties of dendronized polymer with Fréchet‐type dendrons peripherally decorated by carboxylic acid functionalization

A new carboxylic acid‐terminated dendronized polymer (denpol), constructed with linear chain attaching Fréchet‐type dendrons at each repeat unit, has been designed and synthesized through a combination of macromonomer route and hydrolysis reaction. The resulting denpol exhibits excellent solubility in aqueous solution for pH ≥ 6, and significantly the denpol also encapsulates various aromatic molecules efficiently. The results of UV–vis and fluorescence spectra indicate that hydrophobic and π‐π interactions bring into effect between the water‐insoluble organic molecules and the denpol. Moreover, the photoisomerization of azobenzene solubilized in denpol aqueous solution was investigated, which indicated that trans‐to‐cis and cis‐to‐trans conversions were first‐order reactions. The enhancement of photoisomerization property may attribute to the proper microenvironment in the denpol. Therefore, the denpol is expected to be a potential candidate as amphiphilic unimolecular container. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4564–4574, 2008     

Synthesis and characterization of spirobifluorene‐based polyimides

The synthesis and properties of organosoluble aromatic polyimides, containing spiro‐skeletal units in the polymer backbone on the basis of the spiro‐diamine monomer, 2,2′‐diamino‐9,9′‐spirobifluorene, are described. In the case of the spiro segment, the two fluorene rings are orthogonally arranged and connected through a tetrahedral bonding carbon atom, the spiro center. As a consequence, the polymer chain is periodically zigzagged with a 90° angle at each spiro center. This structural feature minimizes interchain interactions and restricts the close packing of the polymer chains, resulting in amorphous polyimides that have good solubility in organic solvents. Compared with their fluorene‐based cardo analogues, the spirobifluorene‐based polyimides have an improved solubility. Furthermore, the main‐chain rigidity of the polyimide appears to be preserved because of the presence of the spiro structure, which restricts the free segmental mobility. As a result, these polyimides exhibit a high glass‐transition temperature (T_g's) and good thermal stability. The T_g's of these polyimides were in the range of 287–374 °C, and the decomposition temperatures in nitrogen for a 10% weight loss occurred at temperatures above 570 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3615–3621, 2002     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003