Nonlinear optical properties of regioregular main‐chain polyesters

We have prepared new polyesters containing quadratic, nonlinear optical (NLO) active chromophores covalently incorporated into the main chain. In these polymers, the sequence of the chromophore units along the main chain is rigorously head to tail. All the polyesters are processable, both in the melt and in solution. For one polyester, a full second‐order NLO characterization has been performed. An out‐of‐resonance d₃₃ coefficient of 21 pm/V at 1368 nm has been measured. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2719–2725, 2007     

Synthesis and nonlinear optical properties of methacrylate polymers based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophore

Methacrylate polymers containing different molar contents of nonlinear optical (NLO) active molecular segments based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophores were synthesized, and their phase behavior and second‐order NLO properties were investigated. Polymers containing 6–17 mol % chromophore segments allowed the preparation of amorphous and optically clear thin films. Some mesomorphic structuration was exhibited by a polymer with 33 mol % chromophoric units. However, this feature did not prevent the possibility of investigating the NLO properties. Nonlinear resonance‐enhanced d₃₃ coefficients were determined by second harmonic generation experiments on spin‐coated, corona‐poled thin films at λ = 1064 nm. Values ranging from 40 to 60 pm/V were measured with increasing chromophore molar contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1841–1847, 2003     

Facile synthesis and electro‐optic activities of new polycarbonates containing tricyanofuran‐based nonlinear optical chromophores

Two series of novel electro‐optic (EO) polycarbonates containing two different kinds of nonlinear optical (NLO) chromophores with tricyanofurane (TCF) electron acceptor have been successfully prepared through the facile polycondensation between diol NLO chromophore and bisphenol A bis(chloroformate). These new polycarbonates which were characterized by ¹H‐NMR and Fourier transform infrared exhibited good solubility in common polar organic solvents. They also showed glass transition temperatures (T_g) in the range of 124–156 °C. The morphology studies indicated that these polycarbonates had good film quality before and after corona poling. The EO coefficients (r₃₃) of two polycarbonates films were up to 45 pm/V (PC‐TCFC‐2) and 75 pm/V (PC‐DFTC‐3) at the wavelength of 1310 nm. Moreover, good temporal stability of the poling‐induced dipole alignment was also achieved, and the resulting poled films of PC‐TCFC‐2 and PC‐DFTC‐3 could retain 90 and 80% of the initial EO activities at 85 °C for more than 500 h, respectively. Both EO activity and temporal stability results were better than the guest–host EO polymers containing the same concentration chromophores, which indicated that such kind of polycarbonates could effectively suppress the intermolecular electrostatic interaction and translate microscopic molecular hyperpolarizability into macroscopic EO activity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2841–2849.     

Novel Crosslinked Guest-Host System with Stable Second-Order Nonlinearity

Abstract

An epoxy-based nonlinear optical (NLO) polymeric material incorporating 4-(4′-nitrophenylazo) phenylamine has been synthesized and subsequently functionalized with acryloyl groups. A glass transition temperature (T ₈)of 108°C and a degradation temperature (air) of 251°C were recorded. After crosslinking at 160°C for 2 hours, the T ₈ of the polymer increased to 146°C. In order to increase the nonlinear optical chromophore concentration and the crosslinking density, the crosslink-able NLO dye, 2,4-acryloyloxy (4′-phenylazo nitrobenzene), was processed and poled in this epoxy-based NLO material matrix in a manner similar to a typical guest-host system, and thermally crosslinked under the above condition in the poled phase. The crosslinked guest-host material was found to be amorphous with a T ₈ of approximately 132°C. It also exhibits a second-order nonlinear optical coefficient d ₃₃ of 14.14 pm/V at a maximum doping level of 33% by weight of the NLO dye, and retains 93% of its original d ₃₃ value after being subjected to thermal treatment at 100°C for 168 hours. The behavior of the crosslinked polymer and the crosslinked guest-host polymer is discussed.     

Nonlinear optical properties of some side chain copolymers based on benzoxazole containing chromophores

Acrylate‐methylmethacrylate copolymers have been synthesized for nonlinear optical applications. Acrylate monomer units are characterized by the presence in the side chain of phenylbenzoxazole groups containing electron donor‐electron acceptor substituents. The phase behavior of all polymers has been investigated by DSC, X‐ray diffraction and polarizing microscopy: two of them exhibit liquid crystalline behavior of smectic type. For four polymers, nonlinear optical properties have been examined by second harmonic generation measurements on thin films (∼ 1 μm thickness) electrically poled by corona discharge. Second order susceptibility coefficients d₃₃ and average relaxation times 〈τ〉, relative to the time stability of the chromophore poling, have been measured. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 603–608, 1999     

Characterization of a side chain polymer for second‐order nonlinear optical properties

We report the characterization of copolymers of methyl methacrylate (MMA) and 2‐propenoic acid, 2‐methyl‐, 2‐[[[[4‐methyl‐3‐[[(2‐methyl‐4‐nitrophenyl)amino]carbonyl]aminophenyl]carbonyl]oxy]ethyl ester (PAMEE) exhibiting nonlinear optical (NLO) properties. The linear copolymer, poly(MMA‐co‐PAMEE), with a NLO chromophore incorporated into PAMME exhibits a high glass transition temperature of 131°C, as determined by DSC. The thin films of copolymers, which were cast on microscopic glass slides, were optically transparent, and the corona poled polymers produced relatively large and stable second harmonic generation (SHG) signals at room temperature. The nonlinear coefficient d₃₃ of the crosslinked copolymer containing 30 wt % PAMEE was 30.8 pm/V. The SHG signal strength remained unchanged, even after 120 days, and exhibited excellent thermal stability at 65°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1245–1254, 1999     

Design and synthesis of a thermally stable second‐order nonlinear optical chromophore and its poled polymers

A multiple charge‐transfer second‐order nonlinear optical (NLO) chromophore 2,3‐bis(4‐aminophenyl)‐5,6‐dicyanopyrazine (BAPDCP) was successfully designed and synthesized. It was characterized by ¹H NMR, mass spectrometry, Fourier transform infrared spectroscopy, and elemental analysis. The first hyperpolarizability β of BAPDCP was measured with the Hyper–Rayleigh scattering technique, which was 123.5 × 10^?30 esu. The donor‐embedded prepolyimide and prepolyurea were also synthesized by a polyaddition reaction. Thermogravimetric analysis and differential scanning calorimetry demonstrated that either the chromophore or the polymers have fine thermal stability. The thin films of prepolymers were prepared by coating on ITO glass substrate and poled by corona poling at elevating temperature. The second‐order NLO coefficients d₃₃ of the films were measured by in situ second‐harmonic generation measurements. The d₃₃ were deduced as 27.7 and 16.5 pm/V for polyurea and polyimide at 1064 nm fundamental wavelength, respectively. The onset depoling temperature of the polyimide and polyurea were both as high as 200 °C. To understand the temperature effect to the orientation thermal stability of polyimide, two films were treated at different final poling temperatures. The depoling experimental results showed that the orientation stability is higher, as raising the final treated temperature but the d₃₃ value are almost similar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2846–2853, 2003     

New hyperbranched second‐order nonlinear optical poly(arylene‐ethynylene)s containing pentafluoroaromatic rings as isolation group: Facile synthesis and enhanced optical nonlinearity through Ar‐ArF self‐assembly effect

In this article, a facile route was designed to prepare four new hyperbranched poly(arylene‐ethynylene)s containing azo‐chromophore moieties through one‐pot “A₂+B₃” approach via simple Sonogashira coupling reaction. The polymers were all soluble in organic solvents and demonstrated good nonlinear optical (NLO) properties, because of the three‐dimensional spatial isolation effect of these hyperbranched polymers. Due to the different B₃‐type comonomer, the self‐assembly effect of pentafluoroaromatic in the interior of these polymers were different, leading to the different trends of the NLO activities. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New polyurethanes and polyesters for second‐order nonlinear optical applications

New polymers for second‐order nonlinear optical (NLO) applications were synthesized and characterized. They were distinguished by the presence of chromophore groups, with various molecular hyperpolarizability values, used as pendants on substantially rigid backbones. The polymers were prepared through the reaction of tolylene‐2,4‐diisocyanate, or a suitable alkyloxyphthaloyl dichloride, with the N,N‐diethanol‐4‐(phenyl) group azo‐linked to a nitrofluorenone, nitrostilbene, nitrooxadiazole, or nitrothiadiazole moiety. The polymers exhibited good thermal stability, high glass‐transition temperatures, and an absence of crystallinity. The second‐order NLO properties of thin, transparent poled films, prepared by spin coating and thermal corona poling, were investigated for some of the polymers. The second harmonic coefficients, ranging between 18 and 25 pm/V, depended more on the alignment of the chromophore groups along the direction of the poling field than on their molecular hyperpolarizability. The temporal stability of the NLO properties of the polymers was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3013–3022, 2004     

Photocrosslinkable second-order nonlinear optical polymers synthesized by cationic copolymerization

Photocrosslinkable second-order nonlinear optical (NLO) polymers were synthesized from cationic copolymerization of a vinyl ether monomer bearing 4′-nitrobiphenyl-4-oxy group as the NLO chromophore with a vinyl ether monomer bearing cinnamoyl group as the photoreactive moiety. To obtain a suitable poling method involving photocrosslinking, which is capable of inducing a higher and more stable second-order nonlinear coefficient, d₃₃, for NLO polymer films, some poling procedures were investigated. An optimized poling method was as follows. Ultraviolet (UV) irradiation is performed for 90 sec during poling at 50°C for 20 min, followed by poling at 150°C for 20 min. By using this poling method NLO polymer films exhibited a higher and considerably stable d₃₃ value at room temperature, even though they had rather lower glass transition temperatures before photocrosslinking. Some photocrosslinking mechanism for NLO polymers investigated here were considered.     

Effect of pendant group on the second-order optical nonlinearity of sol–gel films

A series of organically modified sol–gel films with various acceptor groups were prepared and characterized. All the chromophores exhibit much larger microscopic optical nonlinearity compared with the classical chromophore DR1 in solvatochromic measurement. Using in situ second harmonic generation (SHG) technique, the optimal poling temperatures (T _opt) for sol–gel films were obtained. The second harmonic coefficients (d ₃₃) of hybrid films at the wavelength of 1,064 nm were in the range of 50.1–70.3 pm/V after corona poling under their T _opt. The NLO stabilities of these poled films were also investigated by tracing the d ₃₃ value as a function of temperature and time. One of the hybrid films, which was prepared from chromophore 2,4-dinitro-4′-(N,N-dihydroxyethyl) aminoazobenzene exhibited a combination of large optical nonlinearity and high NLO stability. Furthermore, the effects of molecular structure on the NLO property and thermal stability of the hybrid films were also discussed.     

Synthesis and nonlinear optical properties of side chain liquid crystalline polymers containing azobenzene push–pull chromophores

Azobenzene monomeric precursors bearing piperazine as donor moiety with different withdrawing groups and derived side chain polymethacrylates have been prepared and characterized. Monomers having terminal cyano or nitro groups, and the corresponding polymers, exhibited smectic A phases. Linear and nonlinear optical properties of every monomer and thin films of the cyano polymer ( pol‐PZ‐CN ) have been also studied. UV‐vis spectroscopy revealed out‐of‐plane orientation in the as prepared films, as confirmed by waveguide refractive index measurements. Moreover, absorption spectra indicated the presence of azo aggregates in these films. The initial molecular arrangement has been modified by applying thermal annealing within the mesophase range and UV‐blue irradiation. Although thermal annealing resulted in a significant amplification of the out‐of‐plane optical anisotropy due to thermotropic self‐organization of side chain azo moieties, irradiation with 440 nm light induced some disruption of aggregates. The nonlinear optical response of Corona poled films has been studied by second harmonic generation measurements, and the influence of the molecular arrangement on the nonlinear d_ij coefficients has been analyzed. The more efficient poling corresponded to preirradiated films. In any case, a noticeable degree of polar order (70% of the initial d₃₃ value) remained for several months after the poling in films kept at RT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 232–242, 2010     

Interpenetrating polymer networks with stable second order nonlinear optical properties

Interpenetrating polymer networks (IPNs) based on polyurethane and polyacrylate-containing 4-(4'-nitrophenylazo) aniline chromophore groups were synthesized and characterized by infrared spectra, gel content and differential scanning calorimetry. Thin, transparent films of the IPNs were prepared by spin-coating, followed by thermal curing and corona poling. The poled IPN film shows very good optical properties and exhibits only one glass transition temperature. The second-order nonlinear optical (NLO) properties of the poled film were studied by visible light absorbance measurement according to one-dimensional rigid oriented gas model. The second-order nonlinear optical polarizability can reach 10^-7 e.s.u. The poled IPN film of defined composition showed a good temporal stability of NLO properties at 120°C for more than 160 hr.     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of photocrosslinkable,side‐chain,second‐order nonlinear optical poly(ester imide)s with great film‐forming ability and long‐term dipole orientation stability

A series of photocrosslinkable, side‐chain, second‐order nonlinear optical (NLO) poly(ester imide)s (PEIs) based on a chromophore‐containing dianhydride, 2,2′‐{4‐[(4‐nitrophenyl)‐azo]phenyl}iminobis(ethyl benzene‐1,2‐dicarboxylic acid anhydride‐4‐carboxylate), benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride, and 4,4′‐diamino‐3,3′‐dimethyl diphenylmethane were prepared. The resulting PEIs exhibited many useful physical characteristics, such as good organosolubility, excellent film‐forming properties, high glass‐transition temperatures (186–229 °C), and high thermal decomposition temperatures. The electrooptic coefficient value of PEI3 at 650 nm was 11.5 pm/V, and high long‐term stability of the NLO chromophore alignment in the poled PEI3 film at 120 °C was observed. The temporal stability of the dipole orientation at 150 °C was further enhanced by ultraviolet irradiation because of photocrosslinking. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 303–312, 2003     

The design,synthesis, and nonlinear optical properties of novel X‐type polyurethane containing dicyanovinylnitroresorcinoxy group with enhanced SHG thermal stability

Novel X‐type polyurethane 5 containing 4‐(2′,2′‐dicyanovinyl)‐6‐nitroresorcinoxy groups as nonlinear optical (NLO) chromophores, which constitute parts of the polymer backbone, was prepared and characterized. Polyurethane 5 is soluble in common organic solvents such as acetone and N,N‐dimethylformamide. It shows thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature (T_g) obtained from differential scanning calorimetry thermogram of around 120 °C. The second harmonic generation (SHG) coefficient (d₃₃) of poled polymer film at 1064‐nm fundamental wavelength is around 6.12 × 10^?9 esu. The dipole alignment exhibits a thermal stability even at 5 °C higher than T_g, and there was no SHG decay below 125 °C due to the partial main chain character of the polymer structure, which is acceptable for NLO device applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of nonlinear optical polyimides containing azodiamine derivative chromophores and their electrooptic and thermal properties

Some thermally stable second‐order nonlinear optical (NLO) polyimides were synthesized. The polyimides were prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and pyromellitic dianhydride with two aromatic azodiamine derivatives as the NLO chromophores. These chromophores, based on a nitro group connected with azobenzene as the acceptor end of a donor–π‐bridge–acceptor chromophore and a diamine group as the donor end, had specific chemical stability. On the basis of ZERNER'S INDO methods, according to the sum‐over‐states formula, a program for the calculation of nonlinear second‐order optical susceptibilities was devised. The resulting polyimides had high number‐average and weight‐average molecular weights of up to 26,000 and 53,500, respectively, and a large glass‐transition temperature of 248 °C. With an in situ poling and temperature ramping technique, the optimal temperatures (T_opt's) for corona poling were obtained for the largest second‐order NLO response. The electrooptic coefficient (γ₃₃) of a polyimide at a wavelength of 830 nm was up to 21 pm/V after corona poling under its T_opt, and the value remained at elevated temperatures (>90.6% was retained at 240 °C for >120 h). The thermal stability of the NLO polyimides was studied with UV spectrometry after poling of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2478–2486, 2002     

The Utilization of Isolation Chromophore in an “A3+B2” Type Second‐Order Nonlinear Optical Hyperbranched Polymer

In this paper, a new nonlinear optical (NLO) hyperbranched polymer P1 is designed and synthesized successfully through one‐pot “A₃+B₂” approach via a simple Sonogashira coupling reaction, in which isolation chromophore is introduced to improve its comprehensive performance such as NLO activity, optical transparency, and stability. For comparison, its analogs, P2 and P3 , just containing one type of chromophore, are also prepared. Although P1 cannot be well poled under our test conditions, its NLO coefficient is still much higher than its analogs P2 , P3, and the linear polyaryleneethynylene P4 , which also contains isolation chromophore, indicating the advantages of isolation chromophore and the three‐dimensional (3D) spatial isolation from the highly branched structure in the NLO field.

     

Click synthesis and reversible electrochromic behaviors of novel polystyrenes bearing aromatic amine units

Novel electrochromic polymers were prepared by the click postfunctionalization of poly(4‐azidomethylstyrene) with alkyne‐containing aromatic amine units in the presence of Cu(I) catalysts. Two kinds of aromatic amine units, tris(4‐alkoxyphenyl)amine and N,N,N′,N′‐tetraphenyl‐p‐phenylenediamine, were introduced into polystyrene side chains, which were completely characterized by gel permeation chromatography–multiangle light scattering, nuclear magnetic resonance, and infrared spectroscopies, and elemental analysis. Thermal analyses demonstrated the high stability with the decomposition temperatures exceeding 300 °C even after postfunctionalization. The UV–vis absorption spectra of the polymer thin films revealed negligible absorption in the visible region, as reasonably confirmed by visual observation. The polymer thin films were prepared by spray‐coating on an indium tin oxide‐coated glass plate. Cyclic voltammograms of these films exhibited anodic peaks ascribed to the oxidation of the side‐chain aromatic amine moieties. The tris(4‐alkoxyphenyl)amine unit displayed one‐step oxidation at 0.287 V (vs. Ag/AgCl), while the N,N,N′,N′‐tetraphenyl‐p‐phenylenediamine unit showed two‐step oxidations at 0.297 and 0.641 V. These oxidation processes produced new colors of the polymer films. The former triarylamine‐based chromophore provided a blue color after the oxidation, while the latter phenylenediamine‐based chromophore showed a potentially controlled green and dark blue colors. The reversibility and switching behaviors of these color changes were also comprehensively investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Crosslinkable maleimide copolymers for stable NLO properties

Second-order, nonlinear optical polymers based on epoxy-substituted methylvinylisocyanates and N-substituted maleimides were synthesized and characterized with spectral and thermal analysis. The photocrosslinking and thermal-crosslinking reactions of copolymers with different chromophore contents were studied. Thermally induced crosslinking during the poling process, performed at the glass-transition temperature (T_g), was prevented by T_g being decreased through the addition of a plasticizer. Electrooptic coefficients (r₃₃), measured for crosslinked and noncrosslinked systems, had similar absolute values and relaxation dynamics. This behavior was explained in terms of the similar rotational mobility of the chromophore units and the paucity of crosslinking sites. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1589–1595, 2001