Synthesis,characterization, and thermal properties of a novel pentaerythritol‐initiated star‐shaped poly(p‐dioxanone)

A novel star‐shaped poly(p‐dioxanone) was synthesized by the ring‐opening polymerization of p‐dioxanone initiated by pentaerythritol with stannous octoate as a catalyst in bulk. The effect of the molar ratio of the monomer to the initiator on the polymerization was studied. The polymers were characterized with ¹H NMR and ¹³C NMR spectroscopy. The thermal properties of the polymers were investigated with differential scanning calorimetry and thermogravimetric analysis. The novel star‐shaped poly(p‐dioxanone) has a potential use in biomedical materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1245–1251, 2006     

Conjugation of bioactive groups to poly(lactic acid) and poly[(lactic acid)-co-(glycolic acid)] films

A novel PLA-based polymer containing reactive pendent ketone or hydroxyl groups was synthesized by the copolymerization of L-lactide with epsilon-caprolactone-based monomers. The polymer was activated with NPC, resulting in an amine-reactive polymer which was then cast into thin polymeric films, either alone or as part of a blend with PLGA, before immersion into a solution of the cell adhesion peptide GRGDS in PBS buffer allowed for conjugation of GRGDS to the film surfaces. Subsequent 3T3 fibroblast cell adhesion studies demonstrated an increase in cellular adhesion and spreading over films cast from unmodified PLGA. Hence the new polymer can be used to obtain covalent linkage of amine-containing molecules to polymer surfaces.     

Synthesis and hydrolytic stability of poly(oxyethylene‐H‐phosphonate)s

Poly(oxyethylene‐H‐phosphonate)s (POE‐H‐Ps), with different poly(oxyethylene) segment lengths, were synthesized via conventional two‐stage polycondensation reaction of dimethyl‐H‐phosphonate and poly(ethylene glycols) (PEGs), with nominal molecular weights of 400, 600, and 1000 Da. The changes in the composition of the reaction mixtures during the polycondensation process were followed by size‐exclusion chromatography (SEC) and NMR. It was found that the three PEG fragments yield reproducibly POE‐H‐Ps with the following molecular weights: ～3000 Da (PEG‐400), ～6000 Da (PEG‐600), and ～10,000 Da (PEG‐1000) as measured by SEC, NMR, and VPO. The hydrolytic behavior of POE‐H‐Ps upon storage and in aqueous media with pH 3, 7.4, and 8 was studied for the first time by a combination of NMR and SEC. It was found that the long‐term stability of the polymers in dry state depends on the length of the PEG fragments and decreased in the following order: POE‐H‐P_(PEG‐1000) > POE‐H‐P_(PEG‐600) > POE‐H‐P_(PEG‐400). The hydrolytic transformation of the polymers in aqueous media is affected mostly by the pH of the solution. The degradation products are PEG fragments containing phosphonate end groups—an important prerequisite for the usage of the POE‐H‐Ps as nontoxic drug delivery vehicles and in vivo precursors for PEGylated prodrugs. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4130–4139, 2008     

Comparison of the growth and degradation of poly(glycolic acid) and poly(ε‐caprolactone) brushes

The growth and degradation of poly(glycolic acid) (PGA) and poly(ε‐caprolactone) (PCL) brushes were compared. Using tin (octanoate) as the catalyst, optimal conditions were found for growth of each polyester brush from the hydroxy‐terminated silicon surface via ring‐opening polymerization. PCL brushes grew thicker at elevated temperatures but the thickest PGA brushes grew at room temperature. Unlike bulk polyesters that can degrade under both acidic and basic conditions, the confined surface polyester brushes only degraded under neutral or basic conditions. The degradation mechanism of grafted polyester brushes was probed through a blocking test. It was shown that the terminal hydroxy groups of these polyester brushes were essential to the degradation process indicating a preferential backbiting mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4643–4649     

In vitro enzymatic degradation of nanoparticles prepared from hydrophobically-modified poly(gamma-glutamic acid)

Amphiphilic poly(gamma-glutamic acid) (gamma-PGA) was prepared by the introduction of L-phenylalanine ethylester (L-PAE) as a side chain. This gamma-PGA-graft-L-PAE formed monodispersed nanoparticles in water. The particle size of the gamma-PGA nanoparticles could be controlled by the degree of L-PAE grafting. The hydrolytic degradation and enzymatic degradation by gamma-glutamyl transpeptidase (gamma-GTP) of these gamma-PGA nanoparticles was studied by gel permeation chromatography (GPC) and scanning electron microscopy (SEM). The hydrolysis ratio of gamma-PGA was found to decrease upon increasing the hydrophilicity of the gamma-PGA. The degradation of the gamma-PGA backbone by gamma-GTP resulted in a dramatic change in nanoparticle morphology. With increasing time, the gamma-PGA nanoparticles reduced in size and finally disappeared completely.Time-course of the changes in the morphology of the gamma-PGA nanoparticles following incubation with gamma-glutamyl transpeptidase.     

Synthesis and rheology of biodegradable poly(glycolic acid) prepared by melt ring‐opening polymerization of glycolide

Ring‐opening polymerization (ROP) of glycolide was studied in melt conditions and in the presence of two different initiators: 1‐dodecanol and 1,4‐butanediol and tin(II) 2‐ethylhexanoate as catalyst. Its subsequent polymerization provided poly(glycolic acid) with controlled molar masses ranging from 2000 to 42,000 g/mol with well‐defined structures characterized by NMR. Their thermal properties were evaluated by DSC analysis, and a glass transition temperature at infinite molar mass (T_g∞) of 44.8 °C was thus calculated. From rheological data, the critical molar mass for entanglement, M_c, was estimated to be near 11,000 g/mol. Furthermore, in situ polymerizations were also performed between the plates of the rheometer within a same temperature range from 210 to 235 °C. The variation of the storage and loss moduli during the polymerization step have been monitored by time sweep oscillatory experiments under an angular frequency ω = 10 rad/s. Finally, the development of an inverse rheological method allowed to calculate the bulk polymerization kinetics in the temperature range 200–230 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1440–1449, 2009     

Synthesis and characterization of a biodegradable amphiphilic copolymer based on branched poly(ϵ‐caprolactone) and poly(ethylene glycol)

A novel biodegradable amphiphilic copolymer with hydrophobic poly(ε‐caprolactone) branches containing cholic acid moiety and a hydrophilic poly(ethylene glycol) chain was synthesized. The copolymer was characterized by FTIR, ¹H NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), polarizing light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD) analysis. The amphiphilic copolymer could self‐assemble into micelles in an aqueous solution. The critical micelle concentration of the amphiphilic copolymer was determined by fluorescence spectroscopy. A nanoparticle drug delivery system with a regularly spherical shape was prepared with high encapsulation efficiency. The in vitro drug release from the drug‐loaded polymeric nanoparticles was investigated. Because of the branched structure of the hydrophobic part of the copolymer and the relatively fast degradation rate of the copolymer, an improved release behavior was observed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5256–5265, 2007     

Synthesis of unimolecular reversed micelle consisting of a poly(L‐lactide) shell and hyperbranched D‐mannan core

A novel biodegradable unimolecular reversed micelle consisting of a poly(L ‐lactide) (PLA) shell and a hyperbranched D ‐mannan (HBM) core, that is, a chestnut‐shaped polymer (PLA–HBM), was synthesized by the polymerization of L ‐lactide on HBM with 4‐(dimethylamino)pyridine (DMAP) as the catalyst. The obtained polymers were soluble in dimethyl sulfoxide, tetrahydrofuran, and chloroform but insoluble in H₂O. The molecular weights of the PLA chain on PLA–HBM tended to increase with increasing polymerization time. The number of PLA chains on PLA–HBM could be controlled by the ratio of DMAP to the sugar unit in HBM. The obtained copolymer, PLA–HBM, acted as a unimolecular reversed micelle with an encapsulation ability toward the hydrophilic molecule. In addition, the entrapped hydrophilic molecules were slowly released from the core of PLA–HBM, and the release rate was accelerated by the breaking of the PLA chains of the shell when proteinase K as a hydrolase of PLA was used. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 406–413, 2006     

Preparation of isotactic‐rich poly(dimethyl vinylphosphonate) and poly(vinylphosphonic acid) via the anionic polymerization of dimethyl vinylphosphonate

A vinylphosphonate monomer, dimethyl vinylphosphonate (DMVP), has been polymerized by anionic initiators. Anionic polymerization of DMVP with tert‐butyllithium (t‐BuLi) in combination with a Lewis acid, tributylaluminum (n‐Bu₃Al), in toluene proceeded smoothly to give an isotactic‐rich poly(dimethyl vinylphosphonate) (PDMVP) with relatively narrow molecular weight distribution. Although all the PDMVPs were soluble in water, the isotactic‐rich PDMVP was insoluble in acetone and in chloroform which are good solvents for an atactic PDMVP prepared by radical polymerization. The isotactic‐rich PDMVP showed higher thermal property than that of the atactic PDMVP. Moreover, we successfully prepared poly(vinylphosphonic acid) (PVPA) through the hydrolysis of the isotactic‐rich PDMVP, which formed a highly transparent, self‐standing film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1677–1682, 2010     

Stereoselective ring‐opening polymerization of rac‐lactide with a single‐site,racemic aluminum alkoxide catalyst: Synthesis of stereoblock poly(lactic acid)

The polymerization of racemic lactide with a racemic aluminum alkoxide catalyst is reported. Microstructural analysis of the polymer produced with ¹H NMR spectroscopy revealed that an isotactic stereoblock poly(lactic acid) formed, where each enantiomerically pure block contained an average of 11 lactide monomer units. The melting point of this polymer, 179 °C, was higher than that of the enantiomerically pure polymer, consistent with the cocrystallization of the enantiomeric blocks of the polymer. The mechanism of the polymer formation is currently unknown, although a polymer exchange pathway, where living chain ends switch between metal centers to produce diastereomeric active species, is proposed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4686–4692, 2000     

Novel biodegradable copolyesters containing blocks of poly(3-hydroxyoctanoate) and poly(epsilon-caprolactone): synthesis and characterization

Novel biodegradable polyester block copolymers have been synthesized by using well-defined poly(3-hydroxyoctanoate) (PHO) oligomers having a hydroxyl end group and an ester end group with M(n) values of 800, 2,500, 5,300, 8,000, or 20,000 as an elastomeric soft segment and poly(epsilon-caprolactone) as a more crystalline segment. These PHO oligomers prepared by methanolysis were subjected to block copolymerization with epsilon-caprolactone. The chemical structure of the copolymers was confirmed by (1)H NMR and (13)C NMR spectroscopy. All the copolyesters are semi-crystalline and two T(g) were observed by differential scanning calorimetry when the molecular weight of the PHO block is about 20,000.     

Synthesis and characterization of novel biodegradable block copolymer poly(ethylene glycol)‐block‐poly(L‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylene carbonate)

An amphiphilic block copolymer, poly(ethylene glycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate) [PEG‐b‐P(LA‐co‐MBC)], was synthesized in bulk by the ring‐opening polymerization of L ‐lactide with 2‐methyl‐2‐benzoxycarbonyl‐propylene carbonate (MBC) in the presence of poly(ethylene glycol) as a macroinitiator with diethyl zinc as a catalyst. The subsequent catalytic hydrogenation of PEG‐b‐P(LA‐co‐MBC) with palladium hydroxide on activated charcoal (20%) as a catalyst was carried out to obtain the corresponding linear copolymer poly(ethyleneglycol)‐block‐poly(L ‐lactide‐co‐2‐methyl‐2‐carboxyl‐propylenecarbonate) [PEG‐b‐P(LA‐co‐MCC)] with pendant carboxyl groups. DSC analysis indicated that the glass‐transition temperature (T_g) of PEG‐b‐P(LA‐co‐MBC) decreased with increasing MBC content in the copolymer, and T_g of PEG‐b‐P(LA‐co‐MCC) was higher than that of the corresponding PEG‐b‐P(LA‐co‐MBC). The in vitro degradation rate of PEG‐b‐P(LA‐co‐MCC) in the presence of proteinase K was faster than that of PEG‐b‐P(LA‐co‐MBC), and the cytotoxicity of PEG‐b‐P(LA‐co‐MCC) to chondrocytes from human fetal arthrosis was lower than that of poly(L ‐lactide). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4771–4780, 2005     

Synthesis of pentablock and multibranched copolymers bearing poly(ethylene glycol), hyperbranched polyglycidol,and poly(L‐lactide) with biocompatibility for controlled drug release

A series of multibranched pentablock copolymer (mBr5BlC), poly(L ‐lactide)‐b‐HBP‐b‐poly(ethylene glycol)‐b‐HBP‐b‐poly(L ‐lactide) (HBP = hyperbranched polyglycidol), has been synthesized by ring‐opening multibranching polymerization of glycidol using bifunctional poly(ethylene glycol) [PEG; molecular weight (MW) = 1000] as an initiator, followed by ring‐opening polymerization (ROP) of L ‐lactide in the presence of stannous octoate. The ROP of different amounts of L ‐lactide on HBP‐b‐PEG‐b‐HBP [MW = 2550; polydispersity index (PDI) = 1.08] yielded a series of the targeted mBr5BlCs of the MW range of 4360–15,300 with narrow PDI. All the mBr5BlCs have been well demonstrated to be in possession of good biocompatibility as biomaterials for various applications in biological medicine areas. The mBr5BlCs with tunable MW exhibited promising controllability in self‐assembly into spherical micellar structures with an average diameter range of 59–140 nm, which have no acute and intrinsic cytotoxicity against normal cells and provide a convenient strategy for drug loading. The anticancer drug doxorubicin was demonstrated to have a good affinity with the copolymer system, and its controlled release was performed in various pHs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(lactic acid) brushes grow longer at lower temperatures

Poly(lactic acid) (PLA) brushes prepared by the ring opening of lactide were thicker when polymerized at a lower temperature (25 °C) than was typically used for polymerization in solution. The molecular weight of solution polymerized lactide was also higher when lactide was polymerized at 25 °C compared with polymerization at higher temperatures. However, the yield of PLA was low at this temperature. These results highlight the different requirements for solution polymerization and brush growth. In the former case, both percentage of conversion and molecular weight are important considerations. In the latter case, however, percentage of conversion is unimportant as a brush represents a very small amount of polymer. It was also shown during the course of these studies that the native hydroxy groups on silicon substrates and silanols in solution were equally good initiators when compared with hydroxy terminated self‐assembled monolayers on gold and alcohols, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3362–3367, 2010     

Novel synthesis of biodegradable star poly(ethylene glycol)‐block‐poly(lactide) copolymers

Biodegradable star‐shaped poly(ethylene glycol)‐block‐poly(lactide) copolymers were synthesized by ring‐opening polymerization of lactide, using star poly(ethylene glycol) as an initiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature. Two series of three‐ and four‐armed PEG‐PLA copolymers were synthesized and characterized by gel permeation chromatography (GPC) as well as ¹H and ¹³C NMR spectroscopy. The polymerization under the used conditions is very fast, yielding copolymers of controlled molecular weight and tailored molecular architecture. The chemical structure of the copolymers investigated by ¹H and ¹³C NMR indicates the formation of block copolymers. The monomodal profile of molecular weight distribution by GPC provided further evidence of controlled and defined star‐shaped copolymers as well as the absence of cyclic oligomeric species. The effects of copolymer composition and lactide stereochemistry on the physical properties were investigated by GPC and differential scanning calorimetry. For the same PLA chain length, the materials obtained in the case of linear copolymers are more viscous, whereas in the case of star copolymer, solid materials are obtained with reduction in their T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3966–3974, 2007     

Ring‐opening polymerization of 6‐hydroxynon‐8‐enoic acid lactone: Novel biodegradable copolymers containing allyl pendent groups

This article reports the synthesis and copolymerization of 6‐hydroxynon‐8‐enoic acid lactone. The ring‐opening polymerization of this lactone‐type monomer bearing a pendant allyl group led to new homopolymers and random copolymers with ε‐caprolactone and L ,L ‐lactide. The copolymerizations were carried out at 110 °C with Sn(Oct)₂ as a catalyst. The introduction of unsaturations into the aliphatic polyester permitted us to carry out different chemical transformations on this family of polymers. For example, this article reports the bromination, epoxidation, and hydrosylilation of the allyl group in the new polyester copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 870–875, 2000     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Y‐shaped poly(ethylene glycol) and poly(trimethylene carbonate) amphiphilic copolymer: Synthesis and for drug delivery

New Y‐shaped (AB₂‐type) amphiphilic copolymers of poly(ethylene glycol) (PEG) with poly(trimethylene carbonate) (PTMC), PEG‐b‐(PTMC)₂, were successfully synthesized by the ring‐opening polymerization (ROP) of TMC with bishydroxy‐modified monomethoxy‐PEG (mPEG). First, a bishydroxy functional ROP initiator was synthesized by esterification of acryloyl bromide with mPEG, followed by Michael addition using excess diethanolamine. A series of Y‐shaped amphiphilic PEG‐(PTMC)₂ block copolymers were obtained via ROP of TMC using this PEG with bishydroxyl end groups as macroinitiator and ZnEt₂ as catalyst. The amphiphilic block copolymers with different compositions were characterized by gel permeation chromatography (GPC) and ¹H NMR, and their molecular weight was measured by GPC. The results showed that the molecular weight of Y‐shaped copolymers increased with the increase of the molar ratio of TMC to mPEG‐(OH)₂ initiator in feed while the PEG chain length was kept constant. The Y‐shaped copolymer mPEG‐(PTMC)₂ could self‐assemble into micelles in aqueous medium and the critical micelle concentration values of the micelles decrease with increase in hydrophobic PTMC block length of mPEG‐(PTMC)₂. The in vitro cytotoxicity and controlled drug release properties of the Y‐shaped amphiphilic block copolymers were also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8131–8140, 2008     

Synthesis,characterization, and star polymer assembly of boronic acid end‐functionalized polycaprolactone

Boronic acid end‐functionalized polycaprolactone (PCL) polymers were synthesized by ring‐opening polymerization using a pinacol boronate ester‐containing (Bpin) initiator. The polymerization provides access to boron‐terminated polymers (i.e. Bpin‐PCL‐OH) with narrow molecular weight distributions (PDI = 1.09). Postsynthetic manipulation of the polymer's terminal hydroxyl group by copper‐catalyzed azide‐alkyne cycloaddition chemistry provides a series of bis end‐functionalized polymers with significant structural diversity at the termini. Deprotection of the boronate ester end group was accomplished with an acidic solid phase DOWEX resin. The boronate ester deprotection methodology does not result in hydrolysis of the polymeric backbone. The boronic acid‐tipped polymers were converted into star polymer assemblies using thermal dehydration and ligand‐facilitated trimerization. Thermal dehydration of (HO)₂B‐PCL‐OAc to the corresponding boroxine‐based star polymer assembly was inefficient and lead to degradation products. Ligand‐facilitated trimerization using either pyridine or 7‐azaindole as the Lewis base was efficient and mild. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Biodegradable polycarbonates containing side carboxyl groups—synthesis,properties, and degradation study

The main objective of the presented research was to synthesise biodegradable aliphatic polycarbonates containing reactive carboxyl pendant groups and to examine the influence of the copolymer chain microstructure and composition on the process of their hydrolytic degradation and cytocompatibility. The work describes copolymerization of cyclic trimethylene carbonate derivative containing benzyl‐ester pendant group (benzyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate) with trimethylene carbonate. The copolymerization was conducted with the use of zinc (II) and lanthanum (III) acetylacetonates as ring‐opening polymerization coordination initiators. Detailed NMR analysis allowed to define the microstructure of the obtained copolymers, which depended on the composition and type of used initiator. The final tapered chain microstructure of the obtained copolymers was related to huge differences in comonomers reactivity and evidenced low level of transesterification of the main copolymer backbone. Chosen copolymers, with unprotected carbonyl groups, were subjected to in vitro degradation test and cytocompatibility studies. It was found that high concentration of carboxyl groups resulted in copolymers which formed hydrogels and were very prone to hydrolytic degradation; they were also cytotoxic toward osteoblast‐like MG 63 cells. Copolymers with lower content of carboxyl groups were found less susceptible to degradation and cytocompatible with studied cells. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2756–2769