Synthesis of new polyfluorene copolymers with a comonomer containing triphenylamine units and their applications in white‐light‐emitting diodes

Novel conjugated polyfluorene copolymers, poly[9,9‐dihexylfluorene‐2,7‐diyl‐co‐(2,5‐bis(4′‐diphenylaminostyryl)‐phenylene‐1,4‐diyl)]s (PGs), have been synthesized by nickel(0)‐mediated polymerization from 2,7‐dibromo‐9,9‐dihexylfluorene and 1,4′‐dibromo‐2,5‐bis(4‐diphenylaminostyryl)benzene with various molar ratios of the monomers. Because of the incorporation of triphenylamine (TPA) moieties, PGs exhibit much higher HOMO levels than the corresponding polyfluorene homopolymers and are able to facilitate hole injection into the polymer layer from the anode electrode in light‐emitting diodes. Conventional polymeric light‐emitting devices with the configuration ITO/PEDOT:PSS/polymer/Ca/Al have been fabricated. A light‐emitting device produced with one of the PG copolymers (PG10) as the emitting layer exhibited a voltage‐independent and stable bluish‐green emission with color coordinates of (0.22, 0.42) at 5 V. The maximum brightness and current efficiency of the PG10 device were 3370 cd/m² (at 9.6 V) and 0.6 cd/A, respectively. To realize a white polymeric light‐emitting diode, PG10 as the host material was blended with 1.0 wt % of a red‐light‐emitting polymer, poly[9,9‐dioctylfluorene‐2,7‐diyl‐alt‐2,5‐bis(2‐thienyl‐2‐cyanovinyl)‐1‐(2′‐ethylhexyloxy)‐4‐methoxybenzene‐5′,5′‐diyl] (PFR4‐S), and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV). The device based on PG10:PFR4‐S showed an almost perfect pure white electroluminescence emission, with Commission Internationale de l'Eclairage (CIE) coordinates of (0.33, 0.36) at 8 V; for the PG10:MEH‐PPV device, the CIE coordinates at this voltage were (0.30, 0.40) with a maximum brightness of 1930 cd/m². Moreover, the white‐light emission from the PG10:PFR4‐S device was stable even at different driving voltages and had CIE coordinates of (0.34, 0.36) at 6 V and (0.31, 0.35) at 10 V. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1199–1209, 2007     

Synthesis of fluorene‐based hyperbranched polymers for solution‐processable blue,green, red,and white light‐emitting devices

For the purpose of making hyperbranched polymer (Hb‐Ps)‐based red, green, blue, and white polymer light‐emitting diodes (PLEDs), three Hb‐Ps Hb‐ terfluorene ( Hb‐TF ), Hb ‐4,7‐bis(9,9′‐dioctylfluoren‐2‐yl)‐2,1,3‐benzothiodiazole ( Hb‐BFBT ), and Hb‐ 4,7‐bis[(9,9′‐dioctylfluoren‐2‐yl)‐thien‐2‐yl]‐2,1,3‐benzothiodiazole ( Hb‐BFTBT ) were synthesized via [2+2+2] polycyclotrimerization of the corresponding diacetylene‐functionalized monomers. All the synthesized polymers showed excellent thermal stability with degradation temperature higher than 355 °C and glass transition temperatures higher than 50 °C. Photoluminance (PL) and electroluminance (EL) spectra of the polymers indicate that Hb‐TF , Hb‐BFBT , and Hb‐BFTBT are blue‐green, green, and red emitting materials. Maximum brightness of the double‐layer devices of Hb‐TF , Hb‐BFBT , and Hb‐BFTBT with the device configuration of indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/light‐emitting polymer/CsF/Al are 48, 42, and 29 cd/m²; the maximum luminance efficiency of the devices are 0.01, 0.02, and 0.01 cd/A. By using host–guest doped system, saturated red electrophosphorescent devices with a maximum luminance efficiency of 1.61 cd/A were obtained when Hb‐TF was used as a host material doped with Os(fptz)₂(PPh₂Me₂)₂ as a guest material. A maximum luminance efficiency of 3.39 cd/A of a red polymer light‐emitting device was also reached when Hb‐BFTBT was used as the guest in the PFO (Poly(9,9‐dioctylfluorene)) host layer. In addition, a series of efficient white devices were, which show low turn‐on voltage (3.5 V) with highest luminance efficiency of 4.98 cd/A, maximum brightness of 1185 cd/m², and the Commission Internationale de l'Eclairage (CIE) coordinates close to ideal white emission (0.33, 0.33), were prepared by using BFBT as auxiliary dopant. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Light‐emitting copolymers based on fluorene and selenophene—Comparative studies with its sulfur analogue: Poly(fluorene‐co‐thiophene)

A series of soluble conjugated copolymers derived from 9,9‐dioctylfluorene (FO) and selenophene (SeH) was synthesized by a palladium‐catalyzed Suzuki coupling reaction with various feed ratios of SeH to FO less than or equal to 50%. The efficient energy transfer from fluorene segments to narrow band‐gap selenophene sites was observed. In comparison with the very well studied copolymer poly(fluorene‐co‐thiophene), poly(9,9‐dioctylfluorene‐co‐selenophene) (PFO‐SeH) shows redshifted photoluminescence (PL) and electroluminescence (EL) emission. PL spectra of the PFO‐SeH copolymers show a significant redshift along with increasing selenophene content in the copolymers and also with increasing polymer concentration in solution. PL quantum efficiency of the selenophene‐containing PFO copolymer is much lower than that of corresponding PFO‐thiophene (Th) copolymers. All these features of PFO‐SeH copolymers can be explained by the difference in aromaticity of selenophene and thiophene heterocycles and the heavy atom effect of Se in comparison with S‐atoms. The device fabricated with PFO‐SeH15 as the emissive layer exhibited high external quantum efficiency (0.51%) at a luminance of 1570 cd/m². Device performance is limited by electron injection and the strong quenching effect of Se atoms. Devices with PFO‐SeH copolymers blended into PFO homopolymers show significant improvement in device performance. External quantum efficiency as high as 1.7% can be obtained for PFO‐SeH30/PFO blend devices. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 823–836, 2005     

White electroluminescence from a single polyfluorene containing bis‐DCM units

A series of fluorene‐based copolymers composed of blue‐ and orange‐light‐emitting comonomers were synthesized through palladium‐catalyzed Suzuki coupling reactions. 9,9‐Dihexylfluorene and 2‐(2,6‐bis‐{2‐[1‐(9,9‐dihexyl‐9H‐fluoren‐2‐yl)‐1,2,3,4‐tetrahydroquinolin‐6‐yl]‐vinyl}‐pyran‐4‐ylidene)‐malononitrile (DCMF) were used as the blue‐ and orange‐light‐emitting chromophores, respectively. The resulting single polymers exhibited simultaneous blue (423/450 nm) and orange (580–600 nm) emissions from these two chromophores. By adjusting the fluorene and DCMF contents, white light emission could be obtained from a single polymer; a device with an ITO/PEDOT:PSS/polymer/Ca/Al configuration was found to exhibit pure white electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.31), a maximum brightness of 1180 cd/m², and a current efficiency of 0.60 cd/A. Furthermore, the white light emission of this device was found to be very stable with respect to variation of the driving voltage. The CIE coordinates of the device were (0.32, 0.29), (0.32, 0.29), and (0.33, 0.31) for driving voltages of 7, 8, and 10 V, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3380–3390, 2007     

Synthesis of copolyfluorenes containing green chromophores based on triphenylamine unit and their application in light‐emitting diodes

Two series of new copolyfluorenes ( PFTP, PFTT ) were prepared by the Suzuki coupling reaction from two green‐emitting dibromo monomers (TP‐Br, TT‐Br) based on triphenylamine unit to be applied in white light electroluminescent devices. They were characterized by molecular weight determination, elemental analysis, DSC, TGA, absorption and photoluminescence spectra, and cyclic voltammetry. The estimated actual contents of the TP and TT chromophores were lower than 7.8 mol % and 1.9 mol % for PFTP and PFTT , respectively. In film state both copolyfluorenes showed photoluminescence at 400–470 and 470–600 nm originated from fluorene segments and the chromophores, respectively, due to incomplete energy transfer. Light‐emitting diodes with a structure of ITO/PEDOT:PSS/copolymer/Ca(50 nm)/Al(100 nm) showed major emission at 493–525 nm, plus minor emission at 400–470 nm when chromophore contents were low. The maximum brightness and maximum current efficiency of PFTP2 device were 8370 cd/m² and 1.47 cd/A, whereas those of PFTT1 device were 9440 cd/m² and 1.77 cd/A, respectively. Tri‐wavelength white‐light emission was realized through blending PFTT1 with poly(9,9‐dihexylfluorene) and a red‐emitting iridium complex, in which the maximum brightness and CIE coordinates were 6880 cd/m² and (0.31, 0.33), respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1553–1566, 2009     

Improved EL efficiency of fluorene‐thieno[3,2‐b]thiophene‐based conjugated copolymers with hole‐transporting or electron‐transporting units in the main chain

New electroluminescent polymers (poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole) ( P1) and poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene‐co‐benzo[2,3,5]thiadiazole‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine ( P2) ) possess hole‐transporting or electron‐transporting units or both in the main chains. Electron‐deficient benzothiadiazole and electron‐rich triphenylamine moieties were incorporated into the polymer backbone to improve the electron‐transporting and hole‐transporting characteristics, respectively. P1 and P2 show greater solubility than poly(9,9′‐dioctylfluorene‐co‐thieno[3,2‐b]thiophene ( PFTT ), without sacrificing their good thermal stability. Moreover, owing to the incorporation of the electron‐deficient benzothiadiazole unit, P1 and P2 exhibit remarkably lower LUMO levels than PFTT , and thus, it should facilitate the electron injection into the polymer layer from the cathode electrode. Consequently, because of the balance of charge mobility, LED devices based on P1 and P2 exhibit greater brightness and efficiency (up to 3000 cd/m² and 1.35 cd/A) than devices that use the pristine PFTT . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 243–253, 2006     

Fluorene copolymers containing bithiophene/2,5‐ or 2,6‐pyridine units: A study of their optical,electrochemical, and electroluminescence properties

Two alternating copolymers, poly[(2,5‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy25T, and poly[(2,6‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy26T, were synthesized by the Pd‐catalyzed Suzuki polymerization method. The pyridine units are present as trimeric monomers in these copolymers and have different connectivities to their two neighboring thiophenes, para‐ and meta‐linkages. We investigated the variations in the optical and electrochemical properties of the copolymers that arise from these different connectivities. The two polymers exhibit 5% weight loss above 410 °C and high glass transition temperatures (T_g: 113 °C for PFO‐TPy25T, 142 °C for PFO‐TPy26T). The UV–vis absorption maximum peaks of PFO‐TPy25T and PFO‐TPy26T in the solid state were found to be 449 and 398 nm respectively, with photoluminescence maximum peaks in the solid state of 573 and 490 nm respectively. Using cyclic voltammetry, we determined their energy band gaps: 3.08 eV for PFO‐TPy25T and 3.49 eV for PFO‐TPy25T. The cyclic voltammetry study of these polymers revealed that there are some differences. The electroluminescence (EL) properties of the copolymers were measured for the device configuration of ITO/PEDOT/polymers/Ca/Al. The device fabricated with the polymer containing 2,5‐pyridine exhibits pale orange emission, whereas the device fabricated with the polymer containing 2,6‐pyridine exhibits pale blue emission. The EL device fabricated with PFO‐TPy25T has a higher brightness (2010 cd/m²) and external quantum efficiency (0.1%) than the PFO‐TPy26T device (260 cd/m², 0.008%), because it has a smaller energy barrier to the injection of charges from PEDOT and Ca into the HOMO and LUMO levels. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4611–4620, 2006     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

Synthesis of novel π‐conjugating polymers based on dibenzothiophene

Novel π‐conjugating polymers based on dibenzothiophene were synthesized with a novel dibenzothiophene derivative, 2,8‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)dibenzothiophene ( 1 ), prepared from dibenzothiophene. The Suzuki coupling polycondensation of 1 with 2,7‐dibromo‐9,9‐dioctylfluorene, 3,6‐dibromo‐9‐octylcarbazole, or 1,4‐dibromo‐2,5‐dioctyloxybenzene afforded the corresponding dibenzothiophene‐based polymers. The measurements of photoluminescence indicated that all these polymers exhibited blue emission in solution. The copolymer containing dibenzothiophene and 9,9‐dioctylfluorene units exhibited higher thermal stability than poly[(9,9‐dioctylfluorene‐2,7‐diyl)], although the quantum yield of copolymer was lower than that of poly[(9,9‐dioctylfluorene‐2,7‐diyl)]. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1521–1526, 2003     

Energy transfer in poly(3‐hexylthiophene)‐g‐Polyfluorene graft copolymers

Conjugated graft copolymers consisting of a poly(3‐hexylthiophene) (P3HT) backbone and poly(9,9'‐dioctylfluorene) side chains (PF) with different grafting degrees were synthesized by the CuAAC reaction. The properties of these materials were studied by UV‐Vis and fluorescence spectroscopy. The former technique provides insight in their self‐assembly, while the latter is used to study the energy funneling from the PF side chains to the P3HT backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1252–1258     

Solvent effects on the morphology and electrical conductivity of a D‐A random copolymer with low band gap

D‐A copolymer systems have unique characteristics, such as low band gap and ambipolar nature, which are important to design electronic polymer devices. In this contribution, we synthesized and characterized a D‐A random copolymer containing bis‐3‐hexylthiophene‐benzothiadiazole as acceptor unit and 9,9‐dioctylfluorene as donor unit. We show that the polymeric film morphology depends of the Hansen solubility parameters, evaporation rate, and surface tension of the solvent. Chloroform, toluene, and 1,2,4‐trichlorobenzene (TCB) promote the formation of self‐assembled structures due to breath‐figure mechanism. In contrast, THF causes aggregation and phase separation that affect negatively the electrical conductivity of the copolymer film. Among the solvents analyzed, TCB is the one with the highest molecular interaction with the copolymer synthetized in this work. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1035–1044     

White electroluminescent single‐polymer achieved by incorporating three polyfluorene blue arms into a star‐shaped orange core

A series of star‐like dopant/host single‐polymer systems with a D‐A type star‐shaped orange core and three blue polyfluorene arms were designed and synthesized. Through tuning the doping concentration of the orange core and thermal annealing treatment of white polymer light‐emitting diodes based on them, highly efficient white electroluminescence has been achieved. A typical single‐layer device (ITO/PEDOT:PSS/polymer/Ca/Al) realized pure white emission with a luminous efficiency of 16.62 cd A^?1, an external quantum efficiency of 6.28% and CIE coordinates of (0.33, 0.36) for S‐WP‐002TPB3 containing 0.02 mol % orange core. The high efficiency of the devices could be mainly attributed to the suppressed concentration quenching of the dopant units, more efficient energy transfer from polymer host to orange dopant and thermal annealing‐induced α‐phase polyfluorene (PF) self‐dopant in amorphous PF host. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Conjugated block copolymers via functionalized initiators and click chemistry

Conjugated block copolymers are potentially useful for organic electronic applications and the study of interfacial charge and energy transfer processes; yet few synthetic methods are available to prepare polymers with well‐defined conjugated blocks. Here, we report the synthesis and thin film morphology of a series of conjugated poly(3‐hexylthiophene)‐block‐poly(9,9‐dioctylfluorene) (P3HT‐b‐PF) and poly(3‐dodecylthiophene)‐block‐poly(9,9‐dioctylfluorene) (P3DDT‐b‐PF) block copolymers prepared by functional external initiators and click chemistry. Functional group control is quantified by proton nuclear magnetic resonance spectroscopy, size‐exclusion chromatography, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The thin film morphology of the resulting all‐conjugated block copolymers is analyzed by a combination of grazing‐incidence X‐ray scattering, atomic force microscopy, and transmission electron microscopy. Crystallization of the P3HT or P3DDT blocks is present in thin films for all materials studied, and P3DDT‐b‐PF films exhibit significant PF/P3DDT co‐crystallization. Processing conditions are found to impact thin film crystallinity and orientation of the π–π stacking direction of polymer crystallites. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 154–163     

Synthesis and characterization of polyfluorenes containing bisphenazine units

Novel conjugated copolymers based on 9,9‐dioctylfluorene and bisphenazine (BP) were synthesized by Suzuki polymerization. Energy transfer from the conjugated main chain to the BP moieties was observed. Full energy transfer was achieved when the molar content of the bisphenazine was 20% (20BPPF) in toluene solution. The similar phenomena were observed even for 1% bisphenazine content copolymer (1BPPF) in film. The lowest occupied molecular orbital (LUMO) energy levels (?3.06 eV) of the copolymers were lower than that of the polyfluorene homopolymer (PFO; ?2.65 eV), indicating that the introduction of the BP unit was benefit to electron injection. Single‐layer electroluminescent devices (ITO/PEDOT:PSS/polymer/LiF/Al) were fabricated to investigate their electroluminescence (EL) performances. The maximum brightness and current efficiency of all BPPF copolymers surpassed the PFO homopolymer. The best single‐layer device was based on 5BPPF, with a maximum brightness of 1532 cd/m² and current efficiency of 1.09 cd/A. Much higher efficiency could be achieved for multilayer EL devices of 5BPPF (ITO/PEDOT:PSS/PVK/polymer/TPBI/LiF/Al), which showed a maximum current efficiency of 10.01 cd/A. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1990–1999, 2010     

Stable and good color purity white light‐emitting devices based on random fluorene/spirofluorene copolymers doped with iridium complex

Conjugated polymers PSNFP and PSNFF based on naphthalene‐containing spirofluorene structure and 9,9‐dioctylfluorene, 2,5‐dioctylbezene were designed and synthesized for light emitting applications. These two polymers show good blue emission both in solution and thin film. Thermal gravimetric analysis reveals they have good thermal stability with the decomposition temperature higher than 400 °C. Electrochemistry characterization shows that both of these polymers have a large band gap and deep highest occupied molecular orbital, which are important features for phosphorescent host materials. White light‐emitting diodes were fabricated by using PSNFF as the host material, containing two typical phosphorescent Ir complex dopants: green emitter Ir(mppy)₃ and red emitter Ir(piq)₂. The color coordinate CIE stayed nearly constant, changed from (0.32, 0.31) to (0.28, 0.31) when the current density varied from 2 to 20 mA cm^?2. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis and characterization of a novel electroluminescent polymer based on a phenoxazine derivative

We report the preparation of a new electroluminescent polymer by the oxidative coupling copolymerization of N‐(4‐n‐butylphenyl)phenoxazine and 9,9‐di‐n‐butylfluorene with ferric(III) chloride. The reaction yields soluble polymers with a weight‐average molecular weight as high as 9000. The reactivity has been studied with respect to the reaction time, temperature, and feed ratio of the comonomers. Under optimum conditions, a copolymer with a 50% comonomer incorporation ratio can be obtained in a 75% yield. The polymers have been characterized with differential scanning calorimetry, cyclic voltammetry, and optical spectroscopy. A simple single‐layer light‐emitting‐diode device of an indium tin oxide/polymer/Mg–Ag structure shows a luminance of 200 cd/m² at an 18‐V operating voltage. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4338–4345, 2006     

Quantifying the efficiency of förster‐assisted optical gain in semiconducting polymer blends by excitation wavelength selective amplified spontaneous emission

We study the correlation between Förster resonance energy transfer (FRET) and optical gain properties in conjugated polymer blends based on regioregular poly(3‐hexylthiophene) (P3HT) and poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT). First, FRET dynamics are investigated with femtosecond transient absorption spectroscopy observing a sub‐picosecond energy transfer from F8BT to P3HT (550 fs) at medium doping levels (40% wt P3HT in F8BT). Amplified spontaneous emission (ASE) is then characterized in blends upon exciting predominantly the host and guest polymers, respectively. The corresponding density of absorbed photons at threshold conditions is compared upon host or guest photoexcitation as a method to quantitatively determine the FRET‐assisted ASE efficiencies. We observe a reduction in ASE efficiency upon host photoexcitation of 20%, in the best case, respect to guest photoexcitation. Our results confirm that even in strongly coupled host:guest mixtures delayed exciton population by energy transfer is subtle to losses ascribed to exciton–exciton annihilation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2311–2317.     

High‐efficiency,electrophosphorescent polymers with porphyrin–platinum complexes in the conjugated backbone: Synthesis and device performance

A series of soluble, conjugated, electrophosphorescent copolymers with (meso‐tetraphenylporphyrinato‐κ⁴N)platinum(II) (PtTPP) complexes incorporated into the polymer main chain were synthesized through the copolymerization of narrow‐band‐gap monomeric porphyrin–platinum(II) complexes and wide‐band‐gap dialkyl‐substituted fluorene monomers by a modified Suzuki coupling reaction. The study of the photoluminescence decay indicated that poly[2,7‐(9,9‐dioctylfluorene)‐co‐2,12‐((meso‐tetraphenylporphyrinato‐κ⁴N)platinum(II))] (PFO–PtTPP) was a triplet emitter. The electroluminescence emission from the fluorene segment was completely quenched for copolymers with PtTPP contents as low as 0.5 mol %. The PFO–PtTPP copolymers emitted deep red light. The device based on the porphyrin–platinum(II) copolymer PFO–5PtTPP (with 5 mol % PtTPP in the copolymer) showed the highest external quantum efficiency of 1.95% with an emission peak at 684 nm in an indium tin oxide/poly(3,4‐ethylenedioxythiophene)/polyvinylcarbazole (PVK)/70:30 (w/w) PFO–5PtTPP: 2‐(biphenyl‐4‐yl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole/Ba/Al device configuration. In comparison with the PFO–PtTPP copolymers synthesized via a postpolymerization metalation route, copolymerization from Pt metal complexes proved to be a more efficient synthetic route for high‐efficiency electrophosphorescent polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4174–4186, 2006