Method for a Convenient and Efficient Synthesis of Amino Acid Acrylic Monomers with Zwitterionic Structure

Ampholyte monomers with zwitterionic moiety derived from α‐amino acid, that is, L‐lysine and L‐serine, were obtained using a method in which their copper complexes could be produced in simple steps. The N‐acryloylation of L‐lysine and L‐serine was carried out by reaction between their copper complexes and acryloyl chloride. Specifically, the removal of copper from the copper complex of acryloyl amino acid through the use of 8‐hydroxyquinoline as an organic chelate precipitant increased the yield of the ampholyte monomers with zwitterionic moiety. These syntheses were easily carried out in a three‐step procedure.     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

Complexation of copper(II) ions with imidazole–carboxylic polymeric systems

The interaction of two polyampholyte systems, poly(1‐vinylimidazole‐co‐acrylic acid) and interpolymer complex poly(acrylic acid)/poly(1‐vinylimidazole) with copper(II) ions in water, was examined with potentiometry (pH‐metry and Cu‐selective electrode) and electron spin‐resonance spectroscopy. Coordination of Cu²⁺ with copolymer proceeded by carboxylic groups, whereas the interpolymer system azole units were also involved in the inner sphere of the complex. Synergism between coordination with metal ions and intramolecular hydrogen or ionic bonds was shown. The interpolymer complex was an effective system for binding, extracting, and concentrating copper ions from water. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2256–2263, 2003     

Comparative study of electrostatic binding vs. complexation of Cu2+ ions with water‐soluble polymers containing styrene sulphonic acid and/or maleic acid units or their sodium salt forms

The interaction of Cu²⁺ ions with the homopolymer poly(styrene sulfonic acid) (PSSH), as well as with the copolymers of maleic acid (MAc) with styrene sulfonic acid (SSH) or vinyl acetate (VAc), was investigated in dilute aqueous solution through turbidimetry, potentiometry, viscometry, and spectrophotometry in the visible region. Cu²⁺ ions were introduced either through neutralization with Cu(OH)₂ of the acid form of the (co)polymers (PSSH, P(SSH‐co‐MAc) and P(VAc‐co‐MAc)) or through mixing of the sodium salt form of the (co)polymers (PSSNa, P(SSNa‐co‐MANa) and P(VAc‐co‐MANa)) with CuSO₄. Turbidimetry, potentiometry, and spectrophotometry revealed that the first carboxylic group of MAc or both carboxylate groups of MANa are involved in the complexation with Cu²⁺ ions when neutralization with Cu(OH)₂ or mixing with CuSO₄ are applied, respectively. The increased values of the reduced viscosity observed mainly at the first stages of neutralization of P(VAc‐co‐MAc) with Cu(OH)₂ indicate that interchain polymer‐Cu²⁺ complexation takes possibly place. Finally, the spectrophotometric behavior observed upon neutralization of P(SSH‐co‐MAc) with Cu(OH)₂ or mixing of P(SSNa‐co‐MANa) with CuSO₄ revealed that the strength of counterion binding by the sulfonate groups is, in fact, comparable with the complexation of Cu²⁺ ions with the carboxylate groups of MAc. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1149–1158, 2008     

Synthesis of transition‐metal‐ion‐selective poly(N‐isopropylacrylamide) hydrogels by the incorporation of an Aza crown ether

A functionalized cyclam was synthesized by the attachment of a polymerizable acryloyl group to one of the four nitrogens on the cyclam molecule. The polymerization of the functionalized cyclam was performed with N‐isopropylacrylamide and N,N′‐methylene bisacrylamide, and the gels obtained were studied in the presence of different transition‐metal‐ion solutions. There was a drastic difference in the phase‐transition temperature (T_c) of the poly(N‐isopropylacrylamide) (PNIPAAm)/cyclam gel in comparison with the pure PNIPAAm gel. For the described system, a T_c shift of 15 °C was obtained. The presence of functionalized cyclam increased the hydrophilicity and T_c of the aforementioned polymer gels in deionized water (at pH 6) because of the presence of protonated amino moieties. The PNIPAAm/cyclam gels showed a dependence of the swelling behavior on pH. T_c of the pure PNIPAAm gel was weakly influenced by the presence of any transition‐metal ions, such as Cu²⁺, Ni²⁺, Zn²⁺, and Mn²⁺. The addition of Cu²⁺ or Ni²⁺ to the PNIPAAm/cyclam gel reduced T_c of the polymer gel, and a shift of approximately 12 °C was observed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1594–1602, 2003     

Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

Temperature‐induced self‐assembly and metal‐ion stabilization of histidine functional block copolymers

Histidine functional block copolymers are thermally self‐assembled into polymer micelles with poly‐N‐isopropylacrylamide in the core and the histidine functionality in the corona. The thermally induced self‐assemblies are reversible until treated with Cu²⁺ ions at 50 °C. Upon treatment with 0.5 equivalents of Cu²⁺ relative to the histidine moieties, metal‐ion coordination locks the self‐assemblies. The self‐assembly behavior of histidine functional block copolymers is explored at different values of pH using DLS and ¹H NMR. Metal‐ion coordination locking of the histidine functional micelles is also explored at different pH values, with stable micelles forming at pH 9, observed by DLS and imaged by atomic force microscopy. The thermal self‐assembly of glycine functional block copolymers at pH 5, 7, and 9 is similar to the histidine functional materials; however, the self‐assemblies do not become stable after the addition of Cu²⁺, indicating that the imidazole plays a crucial role in metal‐ion coordination that locks the micelles. The reversibility of the histidine‐copper complex locking mechanism is demonstrated by the addition of acid to protonate the imidazole and destabilize the polymer self‐assemblies. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1964–1973     

DNA Cleavage Promoted by Cu^2＋ Complex of N,N＇-Bis（2-aminoethyl）-2,6-pyridinedicarboxamide

The interaction of Cu^2＋ complex of N,N＇-bis（2-aminoethyl）-2,6-pyridinedicarboxamide （BAP） with DNA was studied by agarose gel electrophoresis analysis. The results indicate that the BAP-Cu^2＋ complex can promote the cleavage of phosphodiester bond of supercoiled DNA at physiological condition, which is 3.2 × 10^6 times higher than DNA natural degradation. A hydrolytic cleaving mechanism through the cooperation of copper ions and functional amino groups was proposed.     

Enantioselective Synthesis of α‐Hydroxy Amides and β‐Amino Alcohols from α‐Keto Amides

Synthesis of enantiomerically enriched α‐hydroxy amides and β‐amino alcohols has been accomplished by enantioselective reduction of α‐keto amides with hydrosilanes. A series of α‐keto amides were reduced in the presence of chiral Cu^II/(S)‐DTBM‐SEGPHOS catalyst to give the corresponding optically active α‐hydroxy amides with excellent enantioselectivities by using (EtO)₃SiH as a reducing agent. Furthermore, a one‐pot complete reduction of both ketone and amide groups of α‐keto amides has been achieved using the same chiral copper catalyst followed by tetra‐n‐butylammonium fluoride (TBAF) catalyst in presence of (EtO)₃SiH to afford the corresponding chiral β‐amino alcohol derivatives.     

Chiral discrimination of β‐3‐homo‐amino acids using the kinetic method

Chiral discrimination of seven enantiomeric pairs of β‐3‐homo‐amino acids was studied by using the kinetic method and trimeric metal‐bound complexes, with natural and unnatural α‐amino acids as chiral reference compounds and divalent metal ions (Cu²⁺ and Ni²⁺) as the center ions. The β‐3‐homo‐amino acids were selected for this study because, first of all, chiral discrimination of β‐amino acids has not been extensively studied by mass spectrometry. Moreover, these β‐3‐homo‐amino acids studied have different aromatic side chains. Thus, the emphasis was to study the effect of the side chain (electron density of the phenyl ring, as well as the difference between phenyl and benzyl side chains) for the chiral discrimination. The results showed that by the proper choice of a metal ion and a chiral reference compound, all seven enantiomeric pairs of β‐3‐homo‐amino acids could be differentiated. Moreover, it was noted that the β‐3‐homo‐amino acids with benzyl side chains provided higher enantioselectivity than the corresponding phenyl ones. However, increasing or decreasing the electron density of the aromatic ring by different substituents in both the phenyl and benzyl side chains had practically no role for chiral discrimination of β‐3‐homo‐amino acids studied. When copper was used as the central metal, the phenyl side chain containing reference molecules (S)‐2‐amino‐2‐phenylacetic acid (L ‐Phg) and (S)‐2‐amino‐2‐(4‐hydroxyphenyl)‐acetic acid (L ‐4′‐OHPhg) gave rise to an additional copper‐reduced dimeric fragment ion, [Cu^I(ref)(A)]⁺. The inclusion of this ion improved noticeably the enantioselectivity values obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Chiral ligand exchange countercurrent chromatography: Enantioseparation of amino acids

This work deals with the enantioseparation of α‐amino acids by chiral ligand exchange high‐speed countercurrent chromatography using N‐n‐dodecyl‐l ‐hydroxyproline as a chiral ligand and copper(II) as a transition metal ion. A biphasic solvent system composed of n‐hexane/n‐butanol/aqueous phase with different volume ratios was selected for each α‐amino acid. The enantioseparation conditions were optimized by enantioselective liquid–liquid extractions, in which the main influence factors, including type of chiral ligand, concentration of chiral ligand and transition metal ion, separation temperature, and pH of the aqueous phase, were investigated for racemic phenylalanine. Altogether, we tried to enantioseparate 15 racemic α‐amino acids by the analytical countercurrent chromatography, of which only five of them could be successfully enantioseparated. Different elution sequence for phenylalanine enantiomer was observed compared with traditional liquid chromatography and the proposed interactions between chiral ligand, transition metal ion (Cu²⁺), and enantiomer are discussed.     

Studies on the equilibrium among poly(sodium 4‐styrenesulfonate), Cu2+, and iminodiacetic acid by ultrafiltration at constant ionic strength

The ultrafiltration technique evaluates the interactions of water‐soluble polymers with metal ions. Aqueous solutions containing poly(sodium 4‐styrenesulfonate) (PSS), Cu(NO₃)₂, NaNO₃, and iminodiacetic acid (IDAA) are examined by this technique. Cu²⁺ undergoes complex formation with IDAA and intreracts electrostatically with PSS. On the other hand, Na⁺ ions are in competition with Cu²⁺ for the electrostatic binding to PSS. The solutions are ultrafiltered keeping the ionic strength constant, so their compositions are allowed to change continuously. The concentration of Cu²⁺ bound to the polymer showed an exponential decay during filtration. The concentration of Cu²⁺ bound to the polymer before ultrafiltration is calculated by extrapolation. The concentration of the different species in solution is proposed as a function of the filtration factor. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2587–2593, 2002     

Controlled synthesis of thermoresponsive polymers derived from l‐Lysine,a biorenewable resource

Renewable lysine was cyclized to its corresponding α‐amino‐ε‐caprolactam and then underwent the reaction with acryloyl chloride to harvest a 2‐acrylamido‐caprolactam (ACL) monomer. Subsequent reversible addition–fragmentation chain transfer copolymerization of the obtained monomer with oligo(ethylene glycol)acrylate (OEGA) gave well‐defined P(ACL‐co‐OEGA) with low distribution. Nuclear magnetic resonance , size exclusion chromatography, and matrix‐assisted laser desorption ionization–time‐of‐flight–mass spectrometry measurements indicated the controlled feature of the polymerization. Moreover, the resultant copolymers demonstrated thermoresponsiveness, and the cloud points (T_cp) can be adjusted from 34 to 79 °C, by changing pH values, and the fraction of cyclic lysine. These results suggested that these lysine‐based thermoresponsive polymers might be used as new materials in biomedical fields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 862–868     

L‐lysine and EDTA polymer mimics as resins for the quantitative and reversible removal of heavy metal ion water pollutants

Traditional precipitation methods for inorganic micropollutant removal from waters are increasingly being replaced by sorption methods based on both natural and synthetic materials. In this context, two novel effective heavy metal ions absorbers are presented. These resins, LYMA and LMT85, were crosslinked poly(amidoamine)s carrying amine and carboxyl groups in their repeating units. In particular, the LYMA‐repeating unit contains one carboxyl and two amine groups and is a mimic of L ‐lysine, whereas LMT85 contains two amine and five carboxyl groups and is a mimic of EDTA. Both resins were prepared at moderate cost by simple eco‐friendly procedures. The heavy metal ion set adopted as benchmark was Cu²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Ni²⁺, and Co²⁺. LYMA proved selective for Cu²⁺ and Ni²⁺, the other ions tested being negligibly absorbed, whereas LMT85 proved capable of rapidly and quantitatively absorbing all the ions tested either singly or in mixed solution. The absorption process was reversible, and the resins were easily regenerated by acidification. The absorption of several metal ions imparted intense coloring to the resins, a feature possibly exploitable for analytical purposes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and reaction of β‐hydroxyaspartic acid‐based polymethacrylate

O‐Methacryloyl‐N‐(tert‐butoxycarbonyl)‐β‐hydroxyaspartic acid dimethyl ester was synthesized by methyl esterification of β‐hydroxyaspartic acid, followed by protection of the amino group with the tert‐butoxycarbonyl group and then the reaction of the hydroxyl group with methacryloyl chloride. The monomer efficiently underwent radical polymerization to afford the corresponding polymer with a number‐average molecular weight of 42,000 in good yields. The alkaline hydrolysis of the polymer occurred not only at the methyl ester but also at the ester moiety between the main and side chains of the polymer. The methyl ester‐free polymer gradually released β‐hydroxyaspartic acid moiety in a phosphate buffer solution with pH = 7.3 and 7.8. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2782–2788, 2002     

Synthesis of end‐functionalized AB copolymers. II. Synthesis and characterization of carboxyl‐terminated poly(ethylene glycol)–poly(amino acid) block copolymers

AB block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(amino acid) with a carboxyl group at the end of PEG were synthesized with α‐carboxylic sodium‐ω‐amino‐PEG as a macroinitiator for the ring‐opening polymerization of N‐carboxy anhydride. Characterizations by ¹H NMR, IR, and gel permeation chromatography were carried out to confirm that the diblock copolymers were formed. In aqueous media this copolymer formed self‐associated polymer micelles that have a carboxyl group on the surface. The carboxyl groups located at the outer shell of the polymeric micelle were expected to combine with ligands to target specific cell populations. The diameter of the polymer micelles was in the range of 30–80 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3527–3536, 2004     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

Blends of polyester having amino sulfonic acid moieties with poly(vinyl alcohol) and their metal complex formation

Polyester having amino sulfonic acid moieties (TBES) was prepared by a liquid/solid biphase polycondensation of terephthaloyl chloride (TPC) and N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (BES) in trimethyl phosphate (TMP) using triethylamine (TEA) as an acid acceptor. Blends of TBES with PVA and their metal complexes with Ni²⁺ and Co²⁺ ions were prepared. A strong interaction was observed between TBES and PVA. An electric conductivity of 10⁻⁶ S cm⁻¹ was attained for the blend films containing about 5 wt % water. A coordination structure with two chelate rings is proposed for the metal complex with Ni²⁺ and Co²⁺ ions when the molar ratio of amino sulfonic acid groups in TBES to metal ions is larger than 2. Polymer blends complexed with Ni²⁺ or Co²⁺ ions result in semi-interpenetrating polymer networks from chelate formation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3561–3569, 1997     

Synthesis of multidentate functional monomer for ion imprinting

In this work, N,N,N‐tri(2‐carboxyethyl)‐3‐(2‐aminoethylamino)propyl‐trimethoxysilane was prepared as a multidentate functional monomer. The 3D model of the monomer coordinating with Cu²⁺ indicated that the monomer is able to provide five ligating atoms like ethylenediaminetetraacetic acid‐Cu²⁺ to complex with Cu²⁺. When Cu²⁺ was used as a template ion, the synthesis conditions of Cu²⁺‐imprinted polymers were optimized upon orthogonal design. It is interesting to find that Cu²⁺‐imprinted polymer offers a selectivity coefficient of 192.2 when the molar ratio of Cu²⁺ to monomer was exactly 1:1. That means there is no excess ligating atom in the ion‐imprinted polymer and therefore, the nonspecific adsorption could be avoided. Benefiting from the excellent selectivity of Cu²⁺‐imprinted polymer, even if the concentration of Zn²⁺ was 25 times that of Cu²⁺, Cu²⁺‐imprinted polymer still affords a high selectivity coefficient. Finally, the optimal synthesis conditions for Cu²⁺‐imprinted polymer, except the pH, were adopted to prepare Ni²⁺‐imprinted polymer, and Ni²⁺‐imprinted polymer also offered satisfying selectivity to Ni²⁺. That implies this multidentate monomer is adaptable in ion imprinting and, the optimal synthesis conditions of Cu²⁺‐imprinted polymer except pH are likely suitable for the imprinting of other ions besides Cu²⁺.     

Synthesis and chiral recognition properties of poly(N‐propargylamide) gels derived from ornithine and lysine

Copolymerization of ornithine‐ and lysine‐derived N‐propargylamides, N‐α‐tert‐butoxycarbonyl‐N‐δ‐fluorenylmethoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 1 ), N‐α‐tert‐butoxycarbonyl‐N‐ε‐fluorenylmethoxycarbonyl‐L ‐lysine N′‐propargylamide ( 2 ), N‐α‐fluorenylmethoxycarbonyl‐N‐δ‐tert‐butoxycarbonyl‐L ‐ornithine N′‐propargylamide ( 3 ), and N‐α‐fluorenylmethoxycarbonyl‐N‐ε‐tert‐butoxycarbonyl‐L ‐lysine N′‐propargylamide (4) with dipropargyl adipate was carried out using (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃] as a catalyst in THF to obtain polymer gels in 80–93% yields. The gels adsorbed N‐benzyloxycarbonyl L ‐alanine, N‐benzyloxycarbonyl L ‐alanine methyl ester, and (S)‐(+)‐1‐phenyl‐1,2‐ethanediol preferably than the corresponding optical isomers. The order of chiral discrimination was poly( 1 ) > poly( 4 ) > poly( 2 ), poly( 3 ) gels. The fluorenylmethoxycarbonyl groups of the gels could be partly removed by piperidine treatment, leading to increase of adsorptivity but decrease of chiral recognition ability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4175–4182, 2008