Sulfonated syndiotactic polystyrene: sorption of ionic liquid in the amorphous phase and of organic guests in the crystalline phase

Fourier Transform Infrared spectroscopy (FTIR) and Wide‐Angle X‐Ray Diffraction (WAXD) measurements have clearly established the occurrence of a dual sorption ability of sulfonated syndiotactic polystyrene samples, which exhibit the nanoporous δ crystalline phase. In fact, large uptake (up to 20–30 wt%) of ionic liquid (IL; e.g. 1‐ethyl‐3‐methylimidazolium dicyanamide) occurs only in the hydrophilic amorphous sulfonated phases and does not disturb the hydrophobic nanoporous crystalline δ phase. On the other hand, a large uptake of organic guests (e.g. naphthalene) occurs prevailingly in the nanoporous hydrophobic crystalline phase, independently of the presence of the IL in the amorphous phase, eventually leading to the formation of syndiotactic polystyrene co‐crystalline phases. The thermal stability of IL can be largely increased by their inclusion in the amorphous phase of sulfonated syndiotactic polystyrene films. Copyright © 2012 John Wiley & Sons, Ltd.     

Syndiotactic polystyrene films with a cocrystalline phase including carvacrol guest molecules

A monoclinic δ‐clathrate form of syndiotactic polystyrene (s‐PS) with carvacrol (a relevant natural phenolic antimicrobial) has been prepared and characterized by X‐ray diffraction. Very informative are Fourier transform infrared spectra, in particular their OH stretching region that shows a narrow peak and a broad band, corresponding to carvacrol molecules being isolated guest of the co‐crystalline phase or dissolved in the amorphous phase, respectively. Analogous spectral features allow discriminating, for many different s‐PS guests, between molecules being in crystalline or in amorphous phases. s‐PS co‐crystalline films with carvacrol molecules being prevailingly (more than 90%) guest of the co‐crystalline phase have been prepared, even for high carvacrol content (up to 10–11 wt %). The location of most antimicrobial molecules in the crystalline phase assures a decrease of desorption diffusivity of two to three orders and hence long‐term antimicrobial release. © 2014 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 657–665     

Pseudohexagonal crystallinity and thermal and tensile properties of ethene–propene copolymers

Structural (X‐ray diffraction), melting (differential scanning calorimetry), as well as mechanical (tensile tests) characterizations on uncrosslinked ethene–propene copolymer samples, obtained using a metallocene‐based catalytic system and having an ethene content in the range 80–50% by mol, are reported. Samples with an ethene content in the range 80–60% by mol present a disordered pseudohexagonal crystalline phase, whose melting moves from ≈ 40°C down to ≈ −20°C as the ethene content is reduced. The dramatic influence of the crystalline phase on tensile properties of uncrosslinked ethene–propene copolymers is shown. In particular, highest elongation at break values are obtained for samples being essentially amorphous in the unstretched state and partially crystallizing under stretching. On the other hand, lowest tension set values (most elastic behavior) are observed for samples presenting, already in the unstretched state, microcrystalline domains acting as physical crosslinks in a prevailing amorphous phase. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1095–1103, 1999     

A clear-cut experimental method to discriminate between in-plane and out-of-plane molecular transition moments

A new method to orient organic molecules, based on their absorption as guest of the crystalline nanoporous delta phase of uniaxially stretched syndiotactic polystyrene films, is presented. This molecular alignment method not only allows high degrees of guest orientation to be attained but also orients the planar guest molecules with their smallest cross section nearly parallel to the stretching direction (B) rather than perpendicular (A, as usual for absorption in amorphous polymeric phases). As a consequence, in-plane and out-of-plane transition moment vectors maximize their absorption intensities for light polarization nearly perpendicular and parallel to the stretching direction, respectively. Hence, simple linear dichroism measurements by polarized spectra can allow an easy and clear-cut discrimination between in-plane and out-of-plane guest transition moment vectors.     

Advanced materials based on polymer cocrystalline forms

Polymeric “cocrystalline forms,” that is, structures were a polymeric host and a low‐molecular‐mass guest are cocrystallized, were early recognized, and in many cases also well characterized by X‐ray diffraction studies. However, only in the last two decades cocrystalline forms have received attention in material science, due to the ability (of few of them) to maintain an ordered polymer host structure even after guest removal, thus leading to the formation of “nanoporous‐crystalline forms,” for which many applications in the fields of molecular separation and sensors have been proposed. Moreover, in the last decade, an accurate control of the orientation of the polymer cocrystalline phases has been achieved, thus leading to a control of the orientation of the guest molecules, not only in the crystalline phase but also in macroscopic films. In addition, on the basis of this orientation control, in the last few years, cocrystalline films where active molecules are present as guests of polymer cocrystalline phases have been proposed for optical, magnetic and electric applications. In the last few years, it has been also discovered that polymer cocrystallization, when induced by nonracemic guest molecules, can produce stable chiral optical films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Structure and properties of the mesophase of syndiotactic polystyrene—III. Selective sorption of the mesophase of syndiotactic polystyrene

Syndiotactic polystyrene (sPS) has various crystalline forms such as α, β, γ, and δ forms, and a mesophase depending on the preparation method. In this study, we focused on the mesophase with the molecular cavity of sPS, which is obtained by step‐wise extraction of the guest molecules from the sPS δ form. To prepare the mesophase containing different shapes and sizes of the cavity, two kinds of the sPS δ form membrane cast from either toluene or chloroform solution were first prepared and then the guest molecules were removed by a step‐wise extraction method using acetone and methanol. We could succeed in the preparation of two kinds of mesophase with different shapes and sizes of the molecular cavity. Either toluene or chloroform vapor sorption to the sPS mesophase membranes was examined at 25 °C. Sorption analysis indicates that the mesophase with large molecular cavities can mainly sorb large molecules; on the other hand, the mesophase with small cavities can sorb only the small molecules, and is unable to sorb a large amount of large molecule because the cavity was too small to sorb the large molecules. Therefore, the sPS mesophase membrane has sorption selectivity based on the size of the molecular cavity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 238–245, 2004     

Structure and properties of the δ‐form and mesophase of syndiotactic polystyrene membranes prepared from different organic solvents

Syndiotactic polystyrene (sPS) membranes were prepared with different organic solvent systems and compared to get the information about the δ‐form complexing behavior of sPS. Further, the guest molecules included in the clathrate δ form of sPS are removed by stepwise extraction method. The conformational changes during the TTGG helical formation of sPS/organic solvent systems have been identified by FTIR spectroscopy, and it was concluded that the TTGG helices were constructed in regular sequences, which depends on the nature of the respective solvents. The TTGG content in the mesophase is found to be increased by removing the guest molecules. The structural changes of sPS/organic solvent systems have been characterized by WAXD analysis. Moreover, the different clathrate structures were found and showed the different crystalline reflections in the WAXD profiles, which are significantly changed with the kind of guest solvent included in sPS. The content of solvents in the clathrated sPS and the desorption temperatures were determined by thermal analysis. The resulted mesophase of sPS membrane contains the nanoporous molecular cavities that depend on the size of the guest molecule. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1873–1880, 2005     

Interactions of volatile organic compounds with syndiotactic polystyrene crystalline nanocavities

The interaction of some volatile organic compounds, namely, 1,2-dichloroethane, 1,2-dibromoethane, and 1,1,2,2-tetrachloroethane, included in the δ crystalline phase of syndiotactic polystyrene (sPS) has been studied in terms of conformation, orientation, and dynamical behavior. By combination of X-ray diffraction (XRD), Fourier-transform infrared (FTIR), and solid-state (2)H NMR analyses, it has been shown that despite the differences in guest molecular properties (mass, boiling temperature, and volume), stable sPS/guest δ-clathrate cocrystals are formed since the nanoporous δ crystalline form has a flexible structure able to adapt itself to the guest molecule. As a consequence of inclusion, it has been shown that the guest diffusivity is strongly reduced and the dynamical processes are constrained, particularly when these guests are in trans conformation. This suggests the nanoporous sPS δ form to be an efficient tool for water and air purification through volatile organic compound absorption.     

Solid‐state NMR characterizations on phase structures and molecular dynamics of poly(ethylene‐co‐vinyl acetate)

Solid‐state nuclear magnetic resonance spectroscopy and relaxation measurements, together with DSC, have been used to elucidate the structures and molecular dynamics in poly(ethylene‐co‐vinyl acetate) (EVA). It has been found that besides immobile orthorhombic and monoclinic crystalline phases, the third mobile crystalline phase (possibly the phase) of a considerable amount (36% of total crystalline phases) appears in the EVA samples, which forms during room‐temperature aging as a result of the secondary crystallization and melts at temperature somewhat higher than room temperature. Such a mobile crystalline phase has not only the well‐defined chemical shift of its own, but also has different molecular mobility from the orthorhombic phase. The mobile crystalline phase is characterized by the rapid relaxation of the longitudinal magnetization, which is caused by conventional spin‐lattice relaxation, while the slow relaxation of the longitudinal magnetization occurring in the orthorhombic phase is originated from the chain diffusion. In addition, the amorphous phase also contains two components: an interfacial amorphous phase and a melt‐like amorphous phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2864–2879, 2006     

Disordered Nanoporous Crystalline Modifications of Syndiotactic Polystyrene

Disordered crystalline modifications formed by s(2/1)2 helices of syndiotactic polystyrene (s-PS) can be prepared by the removal of bulky guest molecules from intercalate as well as from triclinic δ clathrate forms. The X-ray diffraction pattern of the disordered crystalline modification is characterized from 2θ_CuKα < 12° by only a broad diffraction peak whose maximum is located in the 2θ_CuKα range between 8.7° and 9.8°. Films presenting disordered crystalline modifications have been used for the removal of an organic pollutant from dilute aqueous solutions. The sorption behavior of the disordered crystalline modifications are compared with that of the nanoporous-crystalline δ form as well as of the dense γ form. The disordered crystalline modifications of s-PS presents pollutant (1,2-dichloroethylene) uptake comparable to those of the nanoporous δ and ε forms and much higher than those obtained for the dense γ form. Moreover, FTIR data relative to sorption of 1,2-dichloroethane show that the guest sorption occurs essentially only in the crystalline phase. As a consequence, the obtained disordered crystalline modifications of s-PS can be fully considered disordered nanoporous-crystalline modifications.     

Crystalline orientation and molecular transport properties in nanoporous syndiotactic polystyrene films

The orientation of the crystalline δ nanoporous phase in syndiotactic polystyrene films, obtained by different procedures, have been characterized. For both solution cast and biaxially stretched films a high degree of uniplanar orientation, corresponding to the tendency of the ac crystallographic planes, to be parallel to the film plane has been observed and rationalized. According to molecular dynamics simulations of diffusion of small molecules into the δ nanoporous phase, this uniplanar orientation would minimize the molecular diffusivity through the nanoporous crystalline phase.     

Decomposition of 1,1‐dimethyl‐1‐silacyclobutane on a tungsten filament—evidence of both ring C?C and ring Si?C bond cleavages

The decomposition of 1,1‐dimethyl‐1‐silacyclobutane (DMSCB) on a heated tungsten filament has been studied using vacuum ultraviolet laser single photon ionization time‐of‐flight mass spectrometry. It is found that the decomposition of DMSCB on the W filament to form ethene and 1,1‐dimethylsilene is a catalytic process. In addition, two other decomposition channels exist to produce methyl radicals via the Si? CH₃ bond cleavage and to form propene (or cyclopropane)/dimethylsilylene. It has been demonstrated that both the formation of ethene and that of propene are stepwise processes initiated by the cleavage of a ring C? C bond and a ring Si? C bond, respectively, to form diradical intermediates, followed by the breaking of the remaining central bonds in the diradicals. The formation of ethene via an initial cleavage of a ring C? C bond is dominant over that of propene via an initial cleavage of a ring Si? C bond. When the collision‐free condition is voided, secondary reactions in the gas‐phase produce various methyl‐substituted 1,3‐disilacyclobutane molecules. The dominant of all is found to be 1,1,3,3‐tetramethyl‐1,3‐disilacyclobutane originated from the dimerization of 1,1‐dimethylsilene. Copyright © 2010 John Wiley & Sons, Ltd.     

α‐keto‐β‐diimine nickel‐catalyzed olefin polymerization: Effect of ortho‐aryl substituents and preparation of stereoblock copolymers

A series of α‐keto‐β‐diimine nickel complexes (Ar‐N = C(CH₃)‐C(O)‐C(CH₃)=N‐Ar)NiBr₂; Ar = 2,6‐R‐C₆H₃‐, R = Me, Et, iPr, and Ar = 2,4,6‐Me₃‐C₆H₃‐) was prepared. All corresponding ligands are unstable even under an inert atmosphere and in a freezer. Stable copper complex intermediates of ligand synthesis and ethyl substituted nickel complex were isolated and characterized by X‐ray. All nickel complexes were used for the polymerization of ethene, propylene, and hex‐1‐ene to investigate their livingness and the extent of chain‐walking. Low‐temperature propene polymerization with less bulky ortho‐substituents was less isospecific than the one with isopropyl derivative. Propene stereoblock copolymers were prepared by iPr derivative combining the polymerization at low temperature to prepare isotactic polypropylene (PP) block and at a higher temperature, supporting chain‐walking, to obtain amorphous regioirregular PP block. Alternatively, a copolymerization of propene with ethene was used for the preparation of amorphous block. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2440–2449     

Micromechanical modeling of the elastic properties of semicrystalline polymers: A three‐phase approach

The mechanical performance of semicrystalline polymers is strongly dependent on their underlying microstructure, consisting of crystallographic lamellae and amorphous layers. In line with that, semicrystalline polymers have previously been modeled as two and three‐phase composites, consisting of a crystalline and an amorphous phase and, in case of the three‐phase composite, a rigid‐amorphous phase between the other two, having a somewhat ordered structure and a constant thickness. In this work, the ability of two‐phase and three‐phase composite models to predict the elastic modulus of semicrystalline polymers is investigated. The three‐phase model incorporates an internal length scale through crystalline lamellar and interphase thicknesses, whereas no length scales are included in the two‐phase model. Using linear elastic behavior for the constituent phases, a closed form solution for the average stiffness of the inclusion is obtained. A hybrid inclusion interaction model has been used to compute the effective elastic properties of polyethylene. The model results are compared with experimental data to assess the capabilities of the two‐ or three‐phase composite inclusion model. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

FTIR spectroscopic characterization of structural changes in polyamide‐6 fibers during annealing and drawing

First, we report the development of Fourier transform infrared (FTIR) spectroscopic methods to determine the α/γ‐crystalline phase ratio of polyamide‐6 fibers and, in combination with density measurements, the total crystallinity. Using density determinations of the crystallinity of pure α and pure γ samples, we found the absorption coefficient ratio for the 930 (α) and 973 cm⁻¹ (γ) bands to be 4.4, from which we could obtain the α/γ ratio for any polyamide‐6 sample. The application of this FTIR method to the quantitative analysis of phase changes during thermal treatment and the drawing of polyamide‐6 was then made. We confirmed that crystallization during thermal treatments involved increases in both phases and did not involve crystal‐to‐crystal transformation, whereas drawing involved both crystallization of the amorphous phase in the α form and γ→α transformation. Finally, we revisited the band assignments for the amorphous phase of polyamide‐6 and found that the band at 1170 cm⁻¹ was not an amorphous band but, because its absorbance was independent of crystallinity, could be used as an internal reference band. The band at 1124 cm⁻¹ was reliably attributed to the amorphous phase. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 536–547, 2001     

Microstructural investigation of high‐speed melt‐spun nylon 6 fibers produced with variable spinning speeds

The structural details of high‐speed melt‐spun nylon 6 fibers at spinning speeds ranging from 4500 to 6100 m/min were investigated by solid‐state proton nuclear magnetic resonance (¹H NMR) spectroscopy, density and birefringence measurements, differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). The analyses of the proton spin‐lattice relaxation times in the rotating frame and correlation times confirmed the existence of three different phases, the immobile crystalline, intermediate rigid amorphous, and mobile amorphous regions, in the fiber sample. At spinning speeds lower than 5200 m/min, the portion of the crystalline phase increased at the expense of the rigid amorphous region and then reached a plateau afterward, from which the mobile amorphous portion increased. Combined analyses of density and birefringence measurements, DSC, and XRD in conjunction with NMR results indicated that the formation of the γ crystal became predominant compared to that of the α crystal. The orientation factor of the crystalline phase increased slightly with increasing spinning speed, whereas the amorphous orientation factor decreased because of the increase of the purely amorphous region. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1285–1293, 2000     

Systematic coarse‐graining of semicrystalline polyethylene

In an effort to accelerate simulations exploring deformation mechanisms in semicrystalline polymers, we have created structure‐based coarse‐grained (CG) models of polyethylene and evaluated the extent to which they can simultaneously represent its amorphous and crystalline phases. Two CG models were calibrated from target data sampled from atomistic simulations of supercooled oligomer melts that differ in how accurately they represent the distribution of bond lengths between CG sites. Both models yield semicrystalline morphology when simulations are performed at ambient conditions, and both accurately predict the glass transition and melt temperatures. A thorough evaluation of the models was then conducted to assess how well they represent various properties of the amorphous and crystalline phases. We found that the model that more faithfully reproduces the target bond length distribution poorly represents the crystalline phase, which results from its inability to reproduce correlations in the structural distributions. The second model, which utilizes a harmonic bond potential and thus reproduces the target bond length distribution less accurately, represents the structure and chain mobility within the crystalline phase more realistically. Furthermore, the latter model more faithfully reproduces the vastly different relaxation timescales of the phases, a critical feature for modeling deformation mechanisms in semicrystalline polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 331–342     

Interfacial Modification and Structural Transitions Induced by Guest Molecules Solubilized in U‐Type Nonionic Microemulsions

Abstract

Alcohols and polyols are essential components (in addition to the surfactant, water, and oil) in the formation of U‐type self‐assembled nano‐structures, (sometimes called L‐phases or U‐type microemulsions). These microemulsions are characterized by large isotropic regions ranging from the oil side of the phase diagram up to the aqueous corner. The isotropic oily solutions of reverse micelles (“the concentrates”) can be diluted along some dilution lines with aqueous phase to the “direct micelles” corner via a bicontinuous mesophases (i.e., two structural transitions). This dilution takes place with no phase separations or occurrence of liquid crystalline phases. The structural transitions were determined by viscosity, conductivity, and pulsed gradient spin echo NMR (PGSE NMR), and are not visible to the eye. Two guest nutraceutical molecules (lutein and phytosterols) were solubilized, at their maximum solubilization capacity, in the reversed micellar solutions (L₂ phase) and were further diluted with the aqueous phase to the aqueous micellar corner (L₁ phase). Structural transitions (for the two types of molecule) from water‐in‐oil to bicontinuous microstructures were induced by the guest molecules. The transitions occurred at an earlier stage of dilution, at a lower water content (20 wt.% aqueous phase), than in the empty (blank) microemulsions (transitions at 30 wt.% aqueous phase). The transitions from the bicontinuous microstructure to the oil‐in‐water microemulsions were retarded by the solubilizates and occurred at later dilution stage at higher aqueous phase contents (50 wt.% aqueous region for empty microemulsion and >60 wt.% for solubilized microemulsion). As a result, the bicontinuous isotropic region, in the presence of the guest molecules, becomes much broader. It seems that the main reason for such “guest‐induced structural transitions” is related to a significant flattening and enhanced rigidity of the interface. The guest molecules of the high molecular volume are occupying high volume fraction of the interface (when the solubilization is maximal).     

Monolithic Nanoporous Crystalline Aerogels

Monolithic aerogels can be easily obtained by drying physical gels formed by linear uncross‐linked polymers. Preparation methods, structure, and properties of these physically cross‐linked polymeric aerogels are reviewed, with particular emphasis to those whose cross‐linking knots are crystallites and, more in particular, crystallites exhibiting nanoporous‐crystalline forms. The latter aerogels present beside disordered amorphous micropores (typical of all aerogels) also all identical nanopores of the crystalline phases. Their outstanding guest transport properties combined with low material cost, robustness, durability, and ease of handling and recycle make these aerogels suitable for applications in chemical separations, purification, and storage as well as in biomedicine. Scientific, technological, and industrial perspectives for monolithic nanoporous‐crystalline polymeric aerogels are also discussed.

     

Chloroform sorption in nanoporous crystalline and amorphous phases of syndiotactic polystyrene

The transport of chloroform in films of atactic polystyrene and of semicrystalline syndiotactic polystyrene in its nanoporous form (δ‐form) has been investigated by gravimetric analysis. Experimental tests have been performed at 35, 49, and 56 °C and at several vapor pressures ranging from 0.5 to 100 Torr. Nonequilibrium lattice fluid prediction of the amorphous sorption behavior was used to enucleate the sorption contribution of the crystalline nanoporous phase from semicrystalline samples. Sorption behavior of the crystalline phase has been interpreted on the basis of Langmuir equation. Moreover, the chloroform sorption at low activities in the crystalline nanoporous phase has been predicted by using Grand Canonical Monte Carlo molecular simulations. Isosteric heats of sorption were also experimentally evaluated for the crystalline phase, and compared with the corresponding prediction of molecular simulation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 8–15, 2008