V‐shaped graft copolymers via triple click reactions: Diels–alder,copper‐catalyzed azide–alkyne cycloaddition,and nitroxide radical coupling

We report here a simple and universal synthetic pathway covering triple click reactions, Diels–Alder, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), and nitroxide radical coupling (NRC), to prepare well‐defined graft copolymers with V‐shaped side chains. The Diels–Alder click reaction between the furan protected‐maleimide‐terminated poly(ethylene glycol) (PEG) and a trifunctional core ( 1 ) carrying an anthracene, alkyne, and bromide was carried out to yield the corresponding α‐alkyne‐ and α‐bromide‐terminated PEG (PEG‐alkyne/Br) in toluene at 110 °C. Subsequently, the polystyrene or polyoxanorbornene with pendant azide functionality as a main backbone is reacted with the PEG‐alkyne/Br and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐terminated poly(ε‐caprolactone) using the CuAAC and NRC reactions in a one‐pot fashion in N,N′‐dimethylformamide at room temperature to result in the target V‐shaped graft copolymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4667–4674     

Sequential double polymer click reactions for the preparation of regular graft copolymers

In this study, graft copolymers with regular graft points containing polystyrene (PS) backbone and poly(methyl methacrylate) (PMMA), poly(tert‐butyl acrylate) (PtBA), or poly (ethylene glycol) (PEG) side chains were simply achieved by a sequential double polymer click reactions. The linear α‐alkyne‐ω‐azide PS with an anthracene pendant unit per chain was produced via atom transfer radical polymerization of styrene initiated by anthracen‐9‐ylmethyl 2‐((2‐bromo‐2‐methylpropanoyloxy)methyl)‐2‐methyl‐3‐oxo‐3‐(prop‐2‐ynyloxy) propyl succinate. Subsequently, the azide–alkyne click coupling of this PS to create the linear multiblock PS chain with pendant anthracene sites per PS block, followed by Diels–Alder click reaction with maleimide end‐functionalized PMMA, PtBA, or PEG yielded final PS‐g‐PMMA, PS‐g‐PtBA or PS‐g‐PEG copolymers with regular grafts, respectively. Well‐defined polymers were characterized by ¹H NMR, gel permeation chromatography (GPC) and triple detection GPC. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Triple Click Reaction Strategy for Macromolecular Diversity

This Feature Article focuses on the rapidly emerging concept of the “triple click reactions” towards the design and synthesis of macromolecules with well‐defined topology and chemical composition, and also precise molecular weight and narrow molecular weight distribution. The term “triple click reaction” used in this feature article is based on the utilization of three chemically and mechanistically different click reactions for polymer–polymer conjugation and post‐modification of the polymers. Three sequential click reactions of which two are identical should not be considered to be triple click reactions. The triple click reaction strategy for polymer conjugation and post‐modification of polymers is classified in this article based on the resultant architectures: linear and non‐linear structures.     

3‐miktoarm star terpolymers using triple click reactions: Diels–Alder,copper‐catalyzed azide‐alkyne cycloaddition,and nitroxide radical coupling reactions

Well‐defined linear furan‐protected maleimide‐terminated poly(ethylene glycol) (PEG‐MI), tetramethylpiperidine‐1‐oxyl‐terminated poly(ε‐caprolactone) (PCL‐TEMPO), and azide‐terminated polystyrene (PS‐N₃) or ‐poly(N‐butyl oxanorbornene imide) (PONB‐N₃) were ligated to an orthogonally functionalized core ( 1 ) in a two‐step reaction mode through triple click reactions. In a first step, Diels–Alder click reaction of PEG‐MI with 1 was performed in toluene at 110 °C for 24 h to afford α‐alkyne‐α‐bromide‐terminated PEG (PEG‐alkyne/Br). As a second step, this precursor was subsequently ligated with the PCL‐TEMPO and PS‐N₃ or PONB‐N₃ in N,N‐dimethylformamide at room temperature for 12 h catalyzed by Cu(0)/Cu(I) through copper‐catalyzed azide‐alkyne cycloaddition and nitroxide radical coupling click reactions, yield resulting ABC miktoarm star polymers in a one‐pot mode. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of tadpole polymers via triple click reactions: Copper‐catalyzed azide–alkyne cycloaddition,diels–alder,and nitroxide radical coupling reactions

We designed a trifunctional initiator ( 3 ) containing anthracene, bromide, and OH functionalities and subsequently used as an initiator in atom transfer radical Polymerization (ATRP) of styrene to yield linear polystyrene (PS) with α‐anthracene, OH, and ω‐bromide terminal groups, of which bromide is later transformed into azide to result in the linear anthracene‐, OH‐, and azide‐terminated PS (l‐α‐anthracene‐OH‐ω‐azide‐PS). The copper‐catalyzed azide–alkyne cycloaddition reaction between l‐α‐anthracene‐OH‐ω‐azide‐PS and α‐furan‐protected‐maleimide‐ω‐alkyne linkage, 4 afforded the linear anthracene‐, OH‐, and maleimide‐terminated PS. The cyclization via intramolecular Diels–Alder click reaction of this linear PS and the subsequent conversion of the hydroxyl into bromide resulted in the cyclic PS with one bromide located on the ring, (c‐PS)‐Br. Finally, the c‐PS‐Br was clicked with either well‐defined tetramethylpiperidine‐1‐oxyl‐terminated poly(ethylene glycol) (PEG) or poly(ε‐caprolactone) (PCL) yielding the tadpole polymer, (c‐PS)‐b‐PEG or (c‐PS)‐b‐PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Orthogonal multiple click reactions in synthetic polymer chemistry

This review highlights the concept of multiple click reaction strategy which is utilized for design and synthesis of well‐defined complex macromolecular structures as well as multifunctionalization of well‐defined polymers. This review examines the click combinations mainly from double to quadruple and additionally from the most frequently used to the least. The present review may also be regarded as an update for recent reviews dealing with specifically double and triple click reaction combinations in synthetic polymer chemistry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3147–3165     

Heterograft brush copolymers via romp and triple click reaction strategies involving CuAAC,diels–alder,and nitroxide radical coupling reactions

In this study, an equimolar mixture of oxanorbornenyl‐anthracene (ONB‐anthracene), oxanorbornenyl‐bromide (ONB‐Br), and oxanorbornenyl tosylate (ONB‐OTs) was polymerized via ring opening metathesis polymerization using the first generation Grubbs' catalyst in CH₂Cl₂ at room temperature to form poly(ONB‐anthracene‐co‐ONB‐Br‐co‐ONB‐OTs)₁₀ copolymer as a main backbone. Next, this main backbone was sequentially clicked with a furan protected maleimide‐terminated poly(methyl methacrylate), 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(ethylene glycol), and alkyne‐terminated poly(ε‐caprolactone) (PCL₂₀‐alkyne) via Diels–Alder, nitroxide radical coupling, and copper‐catalyzed azide‐alkyne cycloaddition, respectively, to yield a poly(ONB‐g‐PMMA‐co‐ONB‐g‐PEG‐co‐ONB‐g‐PCL)₁₀ heterograft brush copolymer © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

One‐pot synthesis of star‐block copolymers using double click reactions

3‐Arm star‐block copolymers, (polystyrene‐b‐poly(methyl methacrylate))₃, (PS‐b‐PMMA)₃, and (polystyrene‐b‐poly(ethylene glycol))₃, (PS‐b‐PEG)₃, are prepared using double‐click reactions: Huisgen and Diels–Alder, with a one‐pot technique. PS and PMMA blocks with α‐anthracene‐ω‐azide‐ and α‐maleimide‐end‐groups, respectively, are achieved using suitable initiators in ATRP of styrene and MMA, respectively. However, PEG obtained from a commercial source is reacted with 3‐acetyl‐N‐(2‐hydroxyethyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide (7) to give furan‐protected maleimide‐end‐functionalized PEG. Finally, PS/PMMA and PS/PEG blocks are linked efficiently with trialkyne functional linking agent 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane 2 in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) at 120 °C for 48 h to give two samples of 3‐arm star‐block copolymers. The results of the peak splitting using a Gaussian deconvolution of the obtained GPC traces for (PS‐b‐PMMA)₃ and (PS‐b‐PEG)₃ displayed that the yields of target 3‐arm star‐block copolymers were found to be 88 and 82%, respectively. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7091–7100, 2008     

Multiarm star triblock terpolymers via sequential double click reactions

Multiarm star triblock terpolymers were obtained by using two different click reactions sequentially: Cu(I) catalyzed azide–alkyne and Diels–Alder. The synthetic strategy is described as follows: (poly(methyl methacrylate))_n‐(polystyrene)_m‐poly(divinyl benzene)) ((PMMA)_n‐(PS)_m‐polyDVB) multiarm star diblock copolymer was first obtained from an azide–alkyne click reaction of (alkyne‐PS)_m‐polyDVB multiarm star polymer with α‐anthracene‐ω‐azide PMMA (anth‐PMMA‐N₃), followed by a Diels–Alder click reaction of the anthracene groups at the star periphery with α‐maleimide poly (tert‐butyl acrylate) (PtBA‐MI) or α‐maleimide poly(ethylene glycol) (PEG‐MI) leading to target (PtBA)_k‐(PMMA)_n‐(PS)_m‐polyDVB and (PEG)_p‐(PMMA)_n‐(PS)_m‐polyDVB multiarm star triblock terpolymers. The hydrodynamic diameter of individual multiarm star triblock terpolymers were measured by dynamic light scattering (DLS) to be ～24–27 nm in consistent with the atomic force microscopy (AFM) images on silicon substrates. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1557–1564, 2010     

Linear tetrablock quaterpolymers via triple click reactions,azide‐alkyne,diels–alder,and nitroxide radical coupling in a one‐pot fashion

Azide‐alkyne and Diels–Alder click reactions together with a click‐like nitroxide radical coupling reaction were used in a one‐pot fashion to generate tetrablock quaterpolymer. The various living polymerization generated linear polymers with orthogonal end‐functionalities, maleimide‐terminated poly(ethylene glycol) (PEG‐MI), anthracene‐ and azide‐terminated polystyrene, alkyne‐ and bromide‐terminated poly(tert‐butyl acrylate) or alkyne‐poly(n‐butyl acrylate), and tetramethylpiperidine‐1‐oxyl (TEMPO)‐terminated poly(ε‐caprolactone) (PCL‐TEMPO) were clicked together in a one‐pot fashion to generate PEG‐b‐PS‐b‐PtBA‐b‐PCL or PEG‐b‐PS‐b‐PnBA‐b‐PCL quaterpolymer using Cu(0), CuBr, and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst in dimethyl formamide at 80 °C for 36 h. Linear precursors and target quaterpolymers were analyzed via ¹H NMR and gel permeation chromatography. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

One‐pot fabrication of robust interpenetrating hydrogels via orthogonal click reactions

Interpenetrating polymer network (IPN) hydrogels have been fabricated through a facile one‐pot approach from tetra/bifunctional telechelic macromonomers with epoxy, amine, azide, and alkyne groups by orthogonal double click reactions: epoxy‐amine reaction and copper‐catalyzed azide‐alkyne cycloaddition. Both the crosslinked networks are simultaneously constructed in water from the biocompatible poly (ethylene glycol)‐based macromonomers. The crosslinking density of each network was finely tuned by the macromonomer structure, permitting control of network molecular weights between crosslinks of the final gels. Compared to corresponding single network gels, the IPN gels containing both tightly and loosely crosslinked networks exhibited superior mechanical properties with shear moduli above 15 kPa and fracture stresses over 40 MPa. The synthetic versatility of this one‐pot approach will further establish design principles for the next generation of robust hydrogel materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1459–1467     

Heterograft copolymers via double click reactions using one‐pot technique

The double click reactions (Cu catalyzed Huisgen and Diels–Alder reactions) were used as a new strategy for the preparation of well‐defined heterograft copolymers in one‐pot technique. The synthetic strategy to the various stages of this work is outlined: (i) preparing random copolymers of styrene (St) and p‐chloromethylstyrene (CMS) (which is a functionalizable monomer) via nitroxide mediated radical polymerization (NMP); (ii) attachment of anthracene functionality to the preformed copolymer by the o‐etherification procedure and then conversion of the remaining ? CH₂Cl into azide functionality; (iii) by using double click reactions in one‐pot technique, maleimide end‐functionalized poly(methyl methacrylate) (PMMA‐MI) via atom transfer radical polymerization (ATRP) of MMA and alkyne end‐functionalized poly (ethylene glycol) (PEG‐alkyne) were introduced onto the copolymer bearing pendant anthryl and azide moieties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6969–6977, 2008     

One‐pot double click reactions for the preparation of H‐shaped ABCDE‐type quintopolymer

We employed for the first time double click reactions: Cu(I) catalyzed azide‐alkyne 1,3‐dipolar cycloaddition and Diels–Alder (4 + 2) reactions for the preparation of H‐shaped polymer possessing pentablocks with different chemical nature (H‐shaped quintopolymer) using one‐pot technique. H‐shaped quintopolymer consists of poly(ethylene glycol) (PEG)‐poly(methylmethacrylate) (PMMA) and poly(ε‐caprolactone) (PCL)‐polystyrene (PS) blocks as side chains and poly (tert‐butylacrylate) (PtBA) as a main chain. For the preparation of H‐shaped quintopolymer, PEG‐b‐PMMA and PCL‐b‐PS copolymers with maleimide and alkyne functional groups at their centers, respectively, were synthesized and simply reacted in one‐pot with PtBA with α‐anthracene‐ω‐azide end functionalities in N,N‐dimethylformamide (DMF) using CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst at 120 °C for 48 h. The precursors and the target H‐shaped quintopolymer were characterized comprehensively by ¹H NMR, UV, FTIR, GPC, and triple detection GPC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3409–3418, 2009     

ABC type miktoarm star copolymers through combination of controlled polymerization techniques with thiol‐ene and azide‐alkyne click reactions

ABC type miktoarm star copolymer with polystyrene (PS), poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) arms was synthesized using controlled polymerization techniques in combination with thiol‐ene and copper catalyzed azide‐alyne “click” reactions (CuAAC) and characterized. For this purpose, 1‐(allyloxy)‐3‐azidopropan‐2‐ol was synthesized as the core component in a one‐step reaction with high yields (96%). Independently, ω‐thiol functionalized polystyrene (PS‐SH) was synthesized in a two‐step protocol with a very narrow molecular weight distribution. The bromo end function of PS obtained by atom transfer radical polymerization was first converted to xanthate function and then reacted with 1, 2‐ethandithiol to yield desired thiol functional polymer (PS‐SH). The obtained polymer was grafted onto the core by thiol‐ene click chemistry. In the following stage, ε‐caprolactone monomer was polymerized from the core by ring opening polymerization (ROP) using tin octoate as catalyst through hydroxyl groups to form the second arm. Finally, PEG‐acetylene, which was simply synthesized by the esterification of Me‐PEG and 5‐pentynoic acid, was clicked onto the core through azide groups present in the structure. The intermediates at various stages and the final miktoarm star copolymer were characterized by ¹H NMR, FTIR, and GPC measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Diels‐alder click reaction for the preparation of polycarbonate block copolymers

The Diels‐Alder reaction as a click reaction strategy is applied to the preparation of well‐defined polycarbonate (PC)‐block copolymers. A well‐defined α‐anthracene‐terminated polycarbonate (PC‐anthracene) is prepared using 9‐anthracene methanol as an initiator in the ring opening polymerization of benzyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate in CH₂Cl₂ at room temperature for 5 h. Next, a well‐defined α‐furan protected maleimide‐terminated‐poly(ethylene glycol) (PEG₁₁‐MI or PEG₃₇‐MI), ‐poly(methyl methacrylate) (PMMA₂₆‐MI), and ‐poly(ε‐caprolactone) (PCL₂₇‐MI) were clicked with the PC‐anthracene at reflux temperature of toluene to yield their corresponding PC‐based block copolymers (PC‐b‐PEG, PC‐b‐PMMA, and PC‐b‐PCL). The homopolymer precursors and their block copolymers were characterized by using the GPC, NMR and UV analysis. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Block‐brush copolymers via ROMP and sequential double click reaction strategy

We report an efficient way, sequential double click reactions, for the preparation of brush copolymers with AB block‐brush architectures containing polyoxanorbornene (poly (ONB)) backbone and poly(ε‐caprolactone) (PCL), poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA) side chains: poly(ONB‐g‐PMMA)‐b‐poly(ONB‐g‐PCL) and poly(ONB‐g‐PtBA)‐b‐poly(ONB‐g‐PCL). The living ROMP of ONB affords the synthesis of well‐defined poly(ONB‐anthracene)₂₀‐b‐poly (ONB‐azide)₅ block copolymer with anthryl and azide pendant groups. Subsequently, well‐defined linear alkyne end‐functionalized PCL (PCL‐alkyne), maleimide end‐functionalized PMMA (PMMA‐MI) and PtBA‐MI were introduced onto the block copolymer via sequential azide‐alkyne and Diels‐Alder click reactions, thus yielding block‐brush copolymers. The molecular weight of block‐brush copolymers was measured via triple detection GPC (TD‐GPC) introducing the experimentally calculated dn/dc values to the software. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Well‐defined PE‐b‐PDMS diblock copolymers via the combination of thiol‐ene click and esterification reactions: Facile synthesis and compatibilization for HDPE/silicone oil blends

Well‐defined diblock copolymers of linear polyethylene (PE) and poly(dimethylsiloxane) (PDMS) have been synthesized through a facile route combining the thiol‐ene click chemistry of vinyl‐terminated polyethylene (PE‐ene) and the sequential esterification reaction. The resulting diblock copolymers are characterized by ¹H NMR, FT‐IR, DSC, TGA, and TEM. In addition, the PE‐b‐PDMS diblock copolymers have been evaluated as compatibilizers in the blends of high‐density polyethylene (HDPE) and silicone oil. The morphological analysis and mechanical properties demonstrate that the compatibilized blends with low loading concentration of PE‐b‐PDMS display significant improvements in modulus of elasticity and elongation at break as compared to the uncompatibilized binary blends. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3205–3212     

Postfunctionalization of polyoxanorbornene via sequential Michael addition and radical thiol‐ene click reactions

We demonstrated the successful postfunctionalization of poly(oxanorbornene imide) (PONB) with two types of double bonds using sequential orthogonal reactions, nucleophilic thiol‐ene coupling via Michael addition and radical thiol‐ene click reactions. First, the synthesis of PONB with side chain acrylate groups is carried out via ring‐opening metathesis polymerization and nitroxide radical coupling reaction, respectively. Subsequently, the resulting polymer having two different orthogonal functionalities, main chain vinyl and side chain acrylate, is selectively modified via two sequential thiol‐ene click reactions, nucleophilic thiol‐ene coupling via Michael addition and photoinduced radical thiol‐ene. The orthogonal reactivity of two diverse double bonds, vinyl and acrylate functionalities, for the abovementioned consecutive thiol‐ene click reactions was first demonstrated on the model compound. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Orthogonal multifunctionalization of aliphatic polycarbonate via sequential Michael addition and radical‐thiol‐ene click reactions

Aliphatic polycarbonate (PC) copolymer is synthesized by ring opening copolymerization of acrylate‐ and allyl‐functional cyclic carbonate monomers. The post‐polymerization functionalization of the resulting copolymer is performed quantitatively using a variety of thiol compounds via sequential Michael addition and photo‐induced radical thiol‐ene click reactions within relatively short reaction time at ambient temperature. This metal‐free click chemistry methodology affords the synthesis of biocompatible PC copolymer with multifunctional groups. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1581–1587