Dialysis Nanoprecipitation of Polystyrene Nanoparticles

Using a facile dialysis nanoprecipitation method, nanoparticles of several hundred nanometers have been successfully generated from a “traditional,” non‐biodegradable polymer, that is, polystyrene. The effect of initial polymer concentration inside the dialysis membrane, as well as the polymer/solvent system and the ionic strength (electrolyte concentration) of the dialysis solution, on nanoparticle size is examined. A nucleation‐aggregation mechanism has been provided to explain the observed trends. Furthermore, we determine the zeta potential as a function of ionic strength for the generated nanoparticles and show that anionic charging may be present in the system.     

Nanoprecipitation for ultrafiltration membranes

Polymer nanoparticles are readily obtainable by rapidly mixing a dilute polymer solution and a poor solvent. The nanoparticles of poly(vinylphenol), poly(vinylidene fluoride), and emeraldine base polyaniline prepared by nanoprecipitation become sticky when their diameters decrease down to a few tens of nanometers, and such polymer nanoparticles spontaneously assemble into rigid fractal networks of the nanoparticles. By filtering these fibrous nanoparticle networks on a microfiltration membrane, ultrafiltration membranes with a thin free‐standing filter cake layer made of nanoparticles are obtainable. The nanoparticle membranes are robust at least up to the applied pressure of 2 MPa and can separate 99% of 10 nm Au nanoparticles from the aqueous dispersion at the flux of more than 1835 L m^?2 h^?1 even at very low pressure difference of 0.08 MPa. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 615–620     

Synthesis,characterization, and molecular recognition of sugar‐functionalized nanoparticles prepared by a combination of ROP,ATRP, and click chemistry

The aim of this work was to prepare nanoparticles bearing sugar residues at their surface through the synthesis of amphiphilic block copolymer of poly d,l‐lactide (PLA) and poly(ethylene glycol)methacrylate, with the hydrophilic part terminating with glucopyranoside molecules as a model for any carbohydrate ligand. The construction was achieved by a combination of click chemistry, ring‐opening polymerization, and atom transfer radical polymerization. The modified monomer and resulting copolymer were characterized by NMR, SEC, and FTIR. Nanoparticles with a mean hydrodynamic diameter of <200 nm as determined by quasi‐elastic light scattering were prepared from the amphiphilic copolymer by nanoprecipitation using dimethylformamide (DMF) as water‐miscible solvent. In the range of 2.5–10 mg copolymer/mL DMF, the polymer concentration did not have much effect on the size of the nanoparticles. Accessibility of glucopyranoside molecules on the surface of the nanoparticles was confirmed by formation of aggregates from nanoparticles in the presence of concanavalin A observed by transmission electronic microscopy. Finally, no significant cytotoxicity toward human umbilical vein endothelial cells was detected for the final nanoparticles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3178–3187, 2010     

Reconcentration of diluted polymer solutions by full adsorption/desorption procedure: II. Desorption of macromolecules by a narrow pulse of displacer

Diluted polymer solutions can be effectively reconcentrated applying full adsorption/desorption processes. Macromolecules from diluted solutions are quantitatively retained within a bed of appropriate adsorbent. Next, the polymer is released by a high‐strength desorbing liquid that is introduced into the sorbent bed as a narrow pulse. To evaluate the above reconcentration procedure, medium‐polarity polymers, mainly poly(methyl methacrylate)s of various molar mass distributions were chosen as model species. Nonporous silica was used as an adsorbent, toluene and chloroform as adsorbing liquids, and tetrahydrofuran as a desorbing liquid in an HPLC‐like apparatus. The concentration profiles of both the desorbing liquid pulse and desorbed polymer were monitored with the usual LC detectors. On‐line size exclusion chromatography was employed in selected cases to determine molar mass and molar mass distribution of desorbed macromolecules. The effect of some experimental parameters on the reconcentration efficiency was elucidated, viz. the nature of the sample solvent‐adsorbing liquid, flow rate of desorbing liquid, molar mass, molar mass distribution, and nature of reconcentrated polymer, as well as relations among the amount of the polymer to be reconcentrated and the volume of the desorbing liquid pulse. It is shown that very high reconcentration factors can be readily obtained by the full adsorption–desorption procedure if the experimental conditions are carefully optimized. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 267–275, 1999     

Self‐assembly of N‐carboxyethylchitosan near the isoelectric point

For the first time the possibility to obtain nanostructures by self‐assembly of chitosan polyampholytic derivative was demonstrated. The self‐assembly of N‐carboxyethylchitosan (CECh) took place only near its isoelectric point (pH 5.0–5.6). Out of the pH range 5.0–5.6, CECh aqueous solutions behaved as real solutions. Dynamic light scattering and atomic force microscopy analyses revealed that spherically shaped or rod/worm‐like nanosized assemblies were formed depending on the polymer molar mass, pH value, and polymer concentration. CECh of two different molar masses was studied in concentrations ranging from 0.01 to 0.1 mg/mL. The structures from CECh of weight‐average molar mass (M_w ) 4.5 × 10³ g/mol were spherical regardless the pH and polymer concentration. In contrast, CECh of high molar mass (HMMCECh, M_w = 6.7 × 10⁵ g/mol) formed self‐assemblies with spherical shape only at pH 5.0 and 5.6. At pH 5.2 spherical nanoparticles were obtained only at polymer concentration 0.01 mg/mL. The mean hydrodynamic diameter (D_h) of the obtained nanoparticles was in the range from 30 to 980 nm. On increasing the concentration, aggregation of the nanoparticles appeared, and at HMMCECh concentration 0.1 mg/mL, rod/worm‐like structures were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6712–6721, 2008     

Phosphonated oligoallylamine: Synthesis,characterization in water,and development of layer by layer assembly

The work focuses on the synthesis and layer by layer (LbL) assembly of oligoallylamine and phosphonated oligoallylamine. To this aim, the synthesis of oligoallylamine and the phosphonated form have been done by free radical polymerization in aqueous media. First, radical polymerization of acid salt of allylamine was performed. This charged polymer could not be characterized using classical analytical techniques such as size‐exclusion chromatography and matrix‐assisted laser desorption/ionisation‐time of flight mass spectroscopy due to presence of cations. This work demonstrated the interest of capillary electrophoresis (CE) to analyze charged oligomers, using very small amounts of samples. Entangled polymer solution CE was used as a size‐based separation technique for the characterization of the molar mass distribution using indirect ultraviolet detection and calibration based on vinyl pyridine standards. Phosphorus‐containing oligoallylamines having a number‐average molar mass of 1600 g mol^?1 and a 2.3 polydispersity index were obtained. When combined using the LbL approach, prepared polymers showed an exponential growth regime as demonstrated by Fourier transform infrared spectroscopy measurements. Furthermore, thermogravimetric analyses of the LbL‐assembled polymers showed an extraordinary thermal and thermo‐oxidative stability. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym. Phys. 2013 , 51, 1244–1251     

Effect of molar mass and regioregularity on the photovoltaic properties of a reduced bandgap phenyl‐substituted polythiophene

Among the numerous reduced bandgap polymers currently being developed, poly[3‐(4‐octylphenyl)thiophene)]s (POPT) may present attractive properties for organic solar cells due to its facile preparation and improved absorption with respect to poly(3‐hexylthiophene). This article appraises methods of preparation, including the use of diphenyl ether as a reaction medium, and discusses the effects of variations in molar masses, from about 3200 to 65,000 g mol^?1 and regioregularity on its optoelectronic properties. The photovoltaic properties of POPT with [6,6]‐phenyl C₆₁ butyric acid methyl ester (PCBM) in bulk heterojunction devices are also discussed in the light of morphological variations, as indicated by atomic force microscopy characterizations. With an initial screening of conditions, namely POPT:PCBM ratios and deposition solvent, a power conversion efficiency of 1.58% was obtained using a relatively high molar mass POPT sample. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New copolymers of a tautomerizable β‐ketonitrile monomer: Synthesis,characterization and solution tautomerism

The monomer 2‐methyl‐3‐oxo‐5‐phenyl‐4‐pentenonitrile (MOP) was prepared by reaction of ethyl cinnamate and propionitrile in alkaline mixture. This monomer exhibits three possible tautomeric forms. The tautomeric equilibria of MOP and its copolymers with styrene in different solvents were analyzed by ¹H NMR spectroscopy. The bulk and solution radical copolymerization initiated with azobisisobutyronitrile was carried out at 60 °C. The products were characterized by ¹H NMR, ¹³C NMR, HSQC NMR, HMBC NMR, and FTIR spectroscopies. The weight‐average molecular weight and polydispersity index were analyzed with size exclusion chromatography. The monomer reactivity ratios were obtained with the Fineman‐Ross method, obtaining a value of r₁r₂ = 0.286. MOP copolymer composition as well as the nature of the solvent significantly affected the tautomeric equilibrium. Regression analysis of the copolymer composition with solvatochromic parameters showed a good linear correlation, as quantitatively expressed by means of the linear solvation energy relationship using the empirical set of Kamlet‐Taft solvent parameters. This behavior could be attributed to polymer–polymer or polymer‐solvent interactions prevalent in solvents of different polarity, which are responsible for changes in macromolecular chain conformations, as confirmed by FTIR and viscometric studies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyelectrolyte complex nanoparticles from N‐carboxyethylchitosan and polycationic double hydrophilic diblock copolymers

For the first time, the polyelectrolyte complex (PEC) formation tool was used for preparation of core‐shell nanoparticles form the natural polyampholyte N‐carboxyethylchitosan (CECh) and weak polycationic (protonated) polyoxyethylene‐b‐poly[2‐(dimethyl‐amino)ethyl methacrylate] (POE‐b‐PDMAEMA) diblock copolymers. The performed dynamic light scattering analyses revealed that nanoparticles with a PEC core and a POE shell could be formed at mixing ratio between the oppositely charged groups equal to 1/1 depending on CECh molar mass, polymerization degree of PDMAEMA block and ionic strength. The results were confirmed by the performed AFM and cryo‐TEM analyses. When high molar mass CECh was used, core‐shell nanoparticles were obtained with the diblock copolymer of the shortest PDMAEMA block at ionic strength (I) of 0.01. At ionic strength value close to the physiological one (I = 0.1) secondary aggregation occurred. Spherical nanoparticles at I = 0.1 were obtained upon lowering the CECh molar mass. Depending on the polymer partners and medium parameters the size of the obtained particles varied from 60 to 600 nm. The X‐ray photoelectron spectra evidenced the hydrophilic POE‐block shell—coacervate CECh/PDMAEMA‐block core structure. The nanoparticles are stable in a rather narrow pH range around 7.0, thus revealing the high pH‐sensitivity of the obtained core‐shell particles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2105–2117, 2009     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form. Part II. Kinetic analysis and mechanistic study

The central challenge that has limited the development of catalytic hydrogenation of diene‐based polymer latex (i.e., latex hydrogenation) in large‐scale production pertains to how to accomplish the optimal interplay of accelerating the hydrogenation rate, decreasing the required quantity of catalyst, and eliminating the need for an organic solvent. Here, we attempt to overcome this dilemma through decreasing the dimensions of the polymer substrate (such as below 20 nm) used in the hydrogenation process. Very small diene‐based polymer nanoparticles were synthesized and then used as the substrates for the subsequent latex hydrogenation. The effects of particle size, temperature, and catalyst concentration on the hydrogenation rate were fully investigated. An apparent first‐order kinetic model was proposed to describe the rate of hydrogen uptake with respect to the concentration of the olefinic substrate (C?C). Mass transfer of both the hydrogen and catalyst involved in this solid (polymer)–liquid (water)–gas (hydrogen) three‐phase latex system is discussed. The competitive coordination of the catalyst between the C?C and acrylonitrile units within the copolymer was elucidated. It was found that (1) using very small diene‐based polymer nanoparticles as the substrate, the hydrogenation rate of polymer latex can be increased vastly to achieve a high conversion of 95% while a quite low level of catalyst loading is required; (2) this latex hydrogenation process was completely free of organic solvent and no cross‐linking was found; (3) the mass transfer of hydrogen is not a rate‐determining step in the present hydrogenation reactions; (4) the catalyst was dispersed homogeneously within the polymer nanoparticles; (5) for the reaction that has reached about 95 mol % conversion, the kinetic study shows that the reaction is chemically controlled with an apparent activation energy of 100–110 kJ/mol; (6) the strong coordination of C[tbond]N to the catalytically active species RhH₂Cl(PPh₃)₂ imposed a negative effect on the hydrogenation activity. The present research provides a comprehensive study to appreciate the underlying chemistry of latex hydrogenation of diene‐based polymer nanoparticles and more importantly shows great promise toward the commercialization of a “green” catalytic hydrogenation operation of a diene‐based polymer latex in industry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlling the formation of long‐subchain hyperbranched polystyrene from seesaw‐type AB2 macromonomers: Solvent polarity and solubility

Through atom transfer radical polymerization of styrene with 1,3‐dibromomethyl‐5‐propargyloxy‐benzene as initiator followed by the conversion of bromine end‐groups into azide end‐groups, well‐defined seesaw‐type polystyrene (PSt) macromonomers with two molecular weights (M_n = 8.0 and 28.0 k) were obtained. Thus, a series of long‐subchain hyperbranched (lsc‐hp) PSt with high overall molar masses and regular subchain lengths were obtained via copper‐catalyzed azide–alkyne cycloaddition click chemistry performed in THF and DMF, respectively. The polycondensation of seesaw‐type macromonomers was monitored by gel permeation chromatography. Because DMF is the reaction medium with higher polarity, click reaction proceeds more easily in DMF. Therefore, the growth of lsc‐hp PSt in DMF has faster rate than that in THF for the shorter seesaw‐type macromonomer (Seesaw‐8k). However, THF is the solvent with better solubility to PSt and leads to looser conformation of PSt chains. Thus, for the longer seesaw macromonomer (Seesaw‐28k), lsc‐hp PSt in THF has higher overall molar mass. As well, the self‐cyclization of seesaw‐type macromonomers also depends on both solvent and molar mass of macromonomer. The self‐cyclization degrees of Seesaw‐8k in DMF and THF are almost the same while that of Seesaw‐28k macromonomer is obviously lower in THF. The experimental results suggest a physical consideration to control the growth of hyperbranched polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Bioactive mesoglobules of poly(di(ethylene glycol) monomethyl ether methacrylate)–peptide conjugate

This study describes the synthesis and aggregation behavior of thermosensitive poly(di(ethylene glycol) monomethyl ether methacrylate) (P(DEGMA‐ME)) conjugated with the fluorescently labeled pentapeptide glycine‐arginine‐lysine‐phenylalanine‐glycine‐dansyl (GRKFG‐Dns). The GRKFG‐Dns was obtained using Fmoc solid‐phase peptide synthesis and was modified with 2‐bromopropionic acid to initiate an atom transfer radical polymerization of di(ethylene glycol) monomethyl ether methacrylate (DEGMA‐ME). The polymerization led to a well‐defined P(DEGMA‐ME)–GRKFG‐Dns conjugate with a number average molar mass of 108,000 g/mol. The pentapeptide acted as a hydrophilic moiety that increased the phase transition temperature compared to the P(DEGMA‐ME) homopolymer of similar molar mass. The bioconjugate macromolecules aggregated in dilute aqueous solution into spherical particles (mesoglobules). The sizes of aggregates were easily controlled by changing the concentration and heating rate of the P(DEGMA‐ME)‐GRKFG‐Dns solution. The weight average molar masses and sizes of mesoglobules were determined based on light scattering measurements. Enzymatic hydrolysis of the bioconjugate in dilute solution was performed at temperatures below and above the cloud point temperature of the bioconjugate. The peptides were fully accessible to enzymatic digestion even when the macromolecules were aggregated to mesoglobules, indicating that the peptide segments in mesoglobules formed the external shell of the nanoparticles and could be easily released by enzymes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled radical polymerization of N‐acryloylglycinamide and UCST‐type phase transition of the polymers

N‐Acryloylglycinamide was polymerized via the reversible addition fragmentation transfer process without sacrificing its key property, the upper critical solution temperature in water. This could be achieved by choosing an appropriate nonionic initiator [2,2′‐azobis(4‐methoxy‐2.4‐dimethyl valeronitrile) (V‐70)] and nonionic chain‐transfer agent (cyanomethyl dodecyl trithiocarbonate). A good molar mass control was accomplished as proved by the linear increase of molar mass with conversion, a chain extension experiment, and low dispersity. The influence of molar mass, polymer end groups, or salt concentration on the cloud point was analyzed by turbidimetry. Polymer end groups exerted a distinct effect on the cloud points, whereas the influence increased with decreasing molar masses. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of polymer nanoparticles from renewable biobased furfuryl alcohol and maleic anhydride by stabilizer‐free dispersion polymerization

The spherical polymer nanoparticles of biobased renewable monomers, furfuryl alcohol (FA) and maleic anhydride (MAn), with diameters (D_n) in the range of 120 to 500 nm have been prepared by stabilizer‐free dispersion copolymerization. In acetate or its mixture, the conversion of the monomers greatly depended on the concentration of AIBN. When the molar ratio of AIBN/monomers was 3.6% (wt), the monomer conversion could be as high as 80%. The aggregations of the solvated polymer chains formed the nuclei of the polymer particles. After the nucleation stage, both the monomer conversions and particle sizes increased steadily, while the coefficient of variation of the particle size decreased. The almost linear relationship between the D_n³ and the weight of polymer suggested that there is no significant secondary nucleation. The copolymer of FA and MAn could not dissolve in common organic solvents. Elemental analyses, FTIR and ¹³CP‐MAS spectra showed that the copolymer was close to the alternative copolymer of FA and MAn irrespective to the molar ratios of FA/MAn in monomer feed. Furthermore, the two 2,5‐ and 3,4‐dihydrofuran ring configurations exist in the copolymer and the later is the major one. The reaction of copolymer particles with triethylenetetramine confirmed the reactivity of the succinic anhydride groups at the surface of copolymer particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyacrylamide hydrogel membranes with controlled pore sizes

We developed a method to characterize polymer‐supported polyacrylamide crosslinked hydrogel networks using a range of well‐defined poly(N, N‐dimethylacrylamide)‐coated gold nanoparticles with diameters ranging from 3 to 48 nm under ultrafiltration conditions of 16 bar. The membranes resulted in permeabilities ranging between 0.199 and 6.343 × 10^?18 m². There was a direct correlation between the size exclusion and the permeability rate coefficient, k_m; the higher the k_m value the larger the average pore size. Our results further demonstrate that the gold nanoparticles could be trapped within the membrane at the end of a cul‐de‐sacs found within the gel network, which often leads to membrane fouling. We believe that this method of using gold nanoparticles to characterize crosslinked membranes provides insight into the gel network, and will provide a unique tool to analyze new membranes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Grafting of poly(ε‐caprolactone) onto maghemite nanoparticles

We report the coating of maghemite (γ‐Fe₂O₃) nanoparticles with poly(ε‐caprolactone) (PCL) through a covalent grafting to technique. ω‐Hydroxy‐PCL was first synthesized by the ring‐opening polymerization of ε‐caprolactone with aluminum isopropoxide and benzyl alcohol as a catalytic system. The hydroxy end groups of PCL were then derivatized with 3‐isocyanatopropyltriethoxysilane in the presence of tetraoctyltin. The triethoxysilane‐functionalized PCL macromolecules were finally allowed to react on the surface of maghemite nanoparticles. The composite nanoparticles were characterized by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Effects of the polymer molar mass and concentration on the amount of polymer grafted to the surface were investigated. Typical grafting densities up to 3 μmol of polymer chains per m² of maghemite surface were obtained with this grafting to technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6011–6020, 2004     

Molar mass distributions and viscosity behavior of perfluorinated sulfonic acid polyelectrolyte aqueous dispersions

Perfluorinated sulfonic acid polyelectrolyte aqueous dispersions originating from similar polymer feed stocks and having similar compositions can have order‐of‐magnitude viscosity differences that are dependent on the manufacturing process. To better understand this phenomenon at the molecular level, a size exclusion chromatography method incorporating static light scattering detection was developed. The initial apparent mass distributions were broad and bimodal for all dispersions. A high‐molar‐mass shoulder was consistent with a previously postulated aggregate structure, and the evidence suggested that molecular aggregation accounted for viscosity variability. The apparent weight‐average molar masses ranged from 1.3 × 10⁶ to 3.9 × 10⁶ g mol^?1. Upon the heating of the dispersions at or above 230 °C, the aggregate structure was broken down, and this resulted in similar low‐viscosity dispersions that had monomodal mass distributions. The weight‐average molar masses were reduced to approximately 2.5 × 10⁵ g mol^?1, and the polydispersities were approximately 1.7–1.8. Shear thinning with higher viscosities and apparent molar masses was rationalized with intrinsic viscosity and other measurements, which supported an anisotropic aggregate structure, with particles that could be significantly overlapped at nominal 11% concentrations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 421–428, 2005     

Confinement effects on the structure and dynamics of polymer systems from the mesoscale to the nanoscale

In this article, we review some of our recent progress in experimental and simulation methods for generating, characterizing, and modeling polymer microparticles and nanoparticles in a number of polymer and polymer‐blend systems. By using instrumentation developed for probing single fluorescent molecules in micrometer‐sized liquid droplets, we have shown that polymer particles of nearly arbitrary size and composition can be made with a size dispersion that is ultimately limited by the chain length and number distribution within the droplets. Depending on the timescale for solvent evaporation—a tunable parameter in our experiments—the phase separation of otherwise immiscible polymers can be avoided by confinement effects, and homogeneous polymer‐blend microparticles or nanoparticles can be produced. These particles have tunable properties that can be controlled by the simple adjustment of the size of the particle or the relative mass fractions of the polymer components in solution. Physical, optical, and mechanical properties of a variety of microparticles and nanoparticles, differing in size and composition, have been examined with extensive classical molecular dynamics calculations in conjunction with experiments to gain deeper insights into the fundamental nature of their structure, dynamics, and properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1571‐1590, 2005     

One‐step synthesis of Ag@PS nanospheres via flash nanoprecipitation

In the work reported, we utilized a facile flash nanoprecipitation process to generate Ag nanoparticles@nanospheres polymer composites. Ag nanoparticles can be loaded onto the polymeric polystyrene (PS) nanosphere surface using a simple and inexpensive method through in situ growth; the amount of loaded Ag nanoparticles and the size of holes on the PS surface prepared by flash nanoprecipitation can be fine‐tuned by changing the pH of the water medium and the PS nanoparticles should have a greater specific area. The as‐synthesized Ag@PS composite nanoparticles obtained via the one‐step and continuous preparation route show high catalytic activity in the reduction reaction of 4‐nitrophenol. Importantly, the nanoparticles show no loss of catalytic performance over five cycles.     

Biocompatible poly(ethylene glycol)‐poly(γ‐cholesterol‐L‐glutamate) copolymers: Synthesis,characterization, and in vitro studies

A novel amphiphilic poly(ethylene glycol)‐block‐poly(γ‐cholesterol‐L ‐glutamate) (mPEG–PCHLG) diblock copolymer has been synthesized. The mPEG–PCHLG copolymer has good biocompatibility and low toxicity. The mPEG–PCHLG copolymers could aggregate into nanoparticles with PCHLG blocks as the hydrophobic core and PEG blocks as the hydrophilic shell through emulsion solvent evaporation method. The copolymers were characterized by nuclear magnetic resonance spectroscopy, mass spectrum, Fourier transform infrared spectroscopy, and gel permeation chromatography. The particle sizes, size distributions, and zeta potentials of nanoparticles can also be determined by dynamic light scattering and transmission electron microscopy. This work provides a new and facile approach to prepare amphiphilic block copolymer nanoparticles with controllable performances. This novel copolymer may have potential applications in drug delivery and bioimaging applications.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012