Hyperbranched poly(arylene ethynylene)s with triphenylamine core for polymer light‐emitting diodes

A series of light‐emitting hyperbranched poly(arylene ethynylene)s (HB‐PAEs) were prepared by the Sonogashira coupling from bisethynyl of carbazole, fluorene, or dialkoxybenzenes (A₂ type) and tris(4‐iodophenyl)amine (B₃ type). For comparison, two linear polymers (L‐PAEs) of the HB analogs were also synthesized. The polymers were characterized by Fourier transform infrared, NMR, and GPC. The HB polymers showed excellent solubility in chloroform, THF, and chlorobenzene when compared with their linear analogs. The number‐average molecular weight (M_n) of the polymers determined from GPC was found to be in the range of 18,600–34,200. The polymers were thermally stable up to 298–330 °C with only 5% weight loss. The absorption maxima of the polymers were between 354 and 411 nm with optical band gap in the range of 2.5–2.9 eV. The HB polymers were found to be highly fluorescent with photoluminescence quantum yields around 33–42%. The highest occupied molecular orbital energy levels of the polymers calculated from onset oxidation potentials were found to be in the range from ?5.83 to ?6.20 eV. Electroluminescence (EL) properties of three HB‐PAEs and one L‐PAE were investigated with device configuration ITO/PEDOT:PSS/Polymer/LiF/Al. The EL maxima of HB‐PAEs were found to be in the range of 507–558 nm with turn‐on voltages around 7.5–10 V and maximum brightness values of 316–490 cd/m². At the same time, linear analog of one HB‐PAE was found to show a maximum brightness of 300 cd/m² at a turn‐on voltage of 8.2 V. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New Poly(arylene ethynylene)s Consisting of Electron‐Deficient Aryleneimide Units

Summary: A new class of poly(arylene ethynylene)s (PAEs) containing an electron‐deficient N‐alkylphthalimide unit was prepared by means of a Sonogashira reaction. Complete solubility of the PAEs was observed by utilizing a 2,6‐diisopropylphenyl side chain. The chemical structure of the novel soluble polymer 3c was confirmed by NMR spectra, whereas the insoluble polymers were characterized by elemental analysis and IR spectra. Fluorescence measurements of 3c indicate a rigid structure and high symmetry in the excited state.

     

Water‐soluble meta‐poly(phenylene ethynylene) oligomers with stable helical secondary structure

Two novel water‐soluble meta‐poly(phenylene ethynylene) (mPPE) copolymers were synthesized and characterized, each contained ester and amine functional groups attached to exohelix positions on the phenylene rings and one contained methoxy endohelix functional groups. Secondary structure formation was investigated for these materials in aqueous solutions using ultraviolet and fluorescence spectroscopy. Additionally, the folding behaviors are reported for the mPPEs and their protected amine precursors in other protic and aprotic solvents. Results indicate that both mPPEs are able to form stable helical structures in water, while only the nonmethoxylated polymer exhibited a helical structure in acetonitrile and several alcohols. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of soluble,fluorescent poly(arylene ether)s,poly(arylene thioether)s,and poly(arylene sulfone)s containing 1,3,5‐triphenylbenzene segments

The bisphenol 4,4″‐dihydroxy‐5′‐phenyl‐m‐terphenyl ( 4 ), containing a 1,3,5‐triphenylbenzene moiety, was synthesized from a pyrylium salt obtained by the reaction of benzaldehyde with p‐methoxyacetophenone with boron trifluoride etherate as a condensing agent. Polymers were obtained from 4 by a nucleophilic displacement reaction with various activated difluoro monomers and with K₂CO₃ as a base. A series of new poly(arylene ether)s ( 8a – 8f ) were obtained that contained phenyl‐substituted m‐terphenyl segments in the polymer chain. Polymers with inherent viscosities of 0.41–0.99 dL/g were obtained in yields greater than 96%. The polymers were soluble in a variety of organic solvents, including nonpolar solvents such as toluene. Clear, transparent, and flexible films cast from CHCl₃ showed high glass‐transition temperatures (T_g = 198–270 °C) and had excellent thermal stability, as shown by temperatures of 5% weight loss greater than 500 °C. 4 was converted via N,N‐dimethyl‐O‐thiocarbamate into the masked dithiol 4,4″‐bis(N,N′‐dimethyl‐S‐thiocarbamate)‐5′‐phenyl‐m‐terphenyl and was polymerized with activated difluoro compounds in the presence of a mixture of Cs₂CO₃ and CaCO₃ as a base in diphenyl sulfone as a solvent. A series of new poly(arylene thioether)s ( 9a – 9e ) were obtained with T_g values similar to those of 8a – 8e . 9a – 9e were further oxidized into poly(arylene sulfone)s with T_g values 40–80 °C higher than those for 8a – 8e and 9a – 9e . These polymers also had good solubility in organic solvents. A sulfonic acid group was selectively introduced onto the pendent phenyl group of polymers 8a and 8f by reaction with chlorosulfonic acid. The polymers were soluble in dipolar aprotic solvents and formed films via casting from dimethylformamide. Polymers 8a – 8f , 11a , and 11f showed blue and red fluorescence under ultraviolet–visible light with emission maxima at 380–440 nm. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 496–510, 2002; DOI 10.1002/pola.10136     

Synthesis of amphiphilic poly(para‐phenylene)s by Suzuki polycondensation

1,4‐Dibromobenzenes carrying nonpolar hexoxy and polar oligo(ethylene glycol) side chains were subjected to Suzuki polycondensation with a benzene‐1,4‐bisboronic acid ester to produce high‐molar‐mass poly(para‐phenylene)s. The molar masses were determined with size exclusion chromatography with conventional polystyrene and universal calibration. These novel amphiphilically equipped rigid‐rod polymers have the potential to segregate lengthwise into polar and nonpolar domains, a property that has only rarely been described, and promise to exhibit novel interesting supramolecular properties. The oligo(ethylene gylcol) side chains terminate with a silyl‐protected alcohol group, and its deprotection on the polymer was proven to proceed quantitatively. This not only led to a further polarity increase but allows us to attach even more polar (e.g., charged) units in future projects. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2879–2889, 2003     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Para‐linked and meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s: Conformational changes and their effects on iron–sulfur protein detection

Four para‐linked or meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s (PAEs) were synthesized to investigate the solvent‐induced π‐stacked self‐assembly. These PAE backbones are composed of fluorenylene and phenylene units, which are alternatively linked by ethynylene bonds. UV–vis absorption and photoluminescence spectra were used to study their conformational changes as solvent was gradually changed from MeOH to H₂O. In pure water, with gradually increased meta‐phenylene content (0, 50, and 100%), they underwent a gradual transition process of conformation from disordered aggregate structure to helix structure, which was not compactly folded. Moreover, the polymer with an ammonium‐functionalized side chain on the meta‐phenylene unit appeared to adopt a more incompact or extended helix conformation than the corresponding one without this side chain. Furthermore, the conformational changes of these cationic PAEs in H₂O were used to study their effects on biological detection. Rubredoxin (Rd), a type of anionic iron–sulfur‐based electron transfer protein, was chosen to act as biological analyte in the fluorescence quenching experiments of these polymers. Preliminary results suggest that they all exhibit amplified fluorescence quenching, and that the polymer with more features of helix conformation tends to be quenched by Rd more efficiently. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5424–5437, 2006     

Synthesis and properties of poly(arylene ether)s bearing sulfonic acid groups on pendant phenyl rings

Two kinds of new aromatic poly(arylene ether)s containing sulfonic acid groups were synthesized. Polymer 1 composed of tetraphenylphenylene ether and perfluorobiphenylene units was sulfonated with chlorosulfonic acid. Sulfonation took place only at the para position of the pendant phenyl rings. The average degree of sulfonation per repeating unit (m) was controlled from 1 to 4. Sulfonated polymer 2 with m = 3 was soluble in methanol and dimethyl sulfoxide and swelled in water. Incorporating bis(3,5‐dimethylphenyl)sulfone moieties into the sulfonated polymer imparts less methanol affinity. Polymers 4 with 30–65 mol % tetrakis(sulfophenyl)phenylene ether units has high decomposition temperatures above 300 °C, hydrophilicity, and good hydrolytic stability. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3211–3217, 2001     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Fluorescence chemical sensor based on water‐soluble poly(p‐phenylene ethynylene)–graphene oxide composite for Cu2+

A chemical sensor for metal ions was fabricated based on a water‐soluble conjugated polymer–graphene oxide (GO) composite. Water‐soluble poly(p‐phenylene ethynylene) (PPE) with sulfonic acid side chain groups was used to prepare a very stable water‐soluble PPE–GO composite with strong π–π interactions in water. The relationship between the optical properties and metal ion sensing capability of the PPE–GO composite in aqueous solution was investigated. Addition of metal ions enhanced the fluorescence intensity of the composite, and, in particular, the composite enabled the fluorescence detection of Cu²⁺ in aqueous solutions with high selectivity and sensitivity. Therefore, this conjugated polymer–GO composite sensor system was found to be an effective turn‐on type chemical sensor for metal ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Acid‐base properties of poly(amidoamine)s

Polyamidoamines (PAAs) represent a family of degradable polymers carrying tert‐amine groups in the polymer backbone, which behave as polyelectrolytes in aqueous solutions. Many relevant properties of PAAs, including the ability to interact with components of the biological environments, such as nucleic acids, proteins, and living cells, are strongly dependent on their acid‐base properties, hence on their ionization state in different biological districts. In this article, the protonation constants of a series of PAAs have been precisely determined by electrochemical techniques in order to build up a homogeneous library containing both the protonation constants and the average distribution of the charged species, hence the net average charge as a function of pH. Moreover, correlations between chemical and cytotoxicity, have been attempted. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Fluorescence,ion binding,and viscosity properties of poly[2‐ and 4‐vinylpyridine]s in methanol and in sulfuric acid

Fluorescence intensities of poly(2‐vinylpyridine) (P2VP) and poly(4‐vinylpyridine) (P4VP) in H₂SO₄/H₂O solutions were increased with increasing acid concentration. The intensities for P2VP were found to be six times stronger than that of P4VP. These differences were accounted for by the microenvironment of protonated pyridinium group. The ion binding properties of 4‐methylpyridine (4MP), P2VP, and P4VP were investigated in methanol using Tb³⁺ as a fluorescence probe. The increase of fluorescence intensity of Tb³⁺ in [P2VP–Tb³⁺] and [P4VP–Tb³⁺] complexes is due to both the replacement of the inner coordinated methanol molecules and ligand‐to‐metal energy transfer. The model compound 4MP was inefficient from this point of view, and the results were attributed to the polymer cooperative effect. Reduced viscosities of poly(vinylpyridine)s (PVP) in methanol were similar to nonionic polymers; however, when TbCl₃ was added into the solution, the viscosities increased upon dilution. These results also indicated that PVP form complexes with Tb³⁺ in methanol. When diluted, the counterions Cl⁻ are allowed to dissociate and the charged polymer expands. Consequently, the solution's viscosity increases. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1341–1345, 1999     

Influence of the soft segment length on the properties of water‐cured poly(carbonate‐urethane‐urea)s

Poly(carbonate‐urethane‐urea)s (PCUU) based on oligocarbonate diols (M_n ≈ 2000) with different length of the hydrocarbon chain as soft segments were synthesized and investigated. Carbonate oligomerols were obtained in a two‐step method from dimethyl carbonate (DMC) and linear α,ω‐diols (1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, 1,9‐nonanediol, 1,10‐dekanediol and 1,12‐dodecanediol). Oligo(trimethylene carbonate) diol was synthesized using ring‐opening polymerization of trimethylence carbonate. PCUUs were obtained by prepolymer method using isophorone diisocyanate (IPDI) and water as a chain extender. Changes in polymers properties with increase of methylene group number between carbonate linkages were investigated by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), tensile strength and hardness measurements. The thermal stability was also analyzed by means of thermogravimetric analysis (TGA). Based on FTIR analysis influence of methylene groups number between carbonate linkages on phase separation and concentration of allophanate and biuret groups in the samples were investigated. The obtained poly(carbonate‐urethane‐urea)s exhibited very good mechanical properties. Tensile strength and elongation at break were 40 MPa and 400–600%, respectively, depending on the oligocarbonate used. Copyright © 2014 John Wiley & Sons, Ltd.     

RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

Synthesis,characterization, and structure–property investigation of conformationally rigid regioisomers of poly(p‐phenylene ethynylene)s

A series of rigid poly(p‐phenylene ethynylene)s ( PPE1 – PPE4 ) with biphenyl‐ ( M1–M3 ) and phenyl‐ ( M4 ) side groups is prepared from appropriately functionalized monomers. Herein, the solution and solid state absorption studies show the polymers have adopted twisted and rigid conformations, as supported by deep HOMO energy levels (?5.76 to ?5.81 eV). The absorption maxima of PPE1–PPE3 are shifted to shorter wavelength (λ_max = 375–381 nm) as compared to linear poly(p‐phenylene ethynylene)s (446 nm), implying a nonplanar conformation. The self‐assembly of polymers into fibers is examined using scanning electron microscopy. The fibers are not observed in PPE4 with short phenyl side group, suggesting the important role of the interplay between rigidity, position, and size of the side chains toward the formation of fibers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3652–3662     

Synthesis of poly(arylene ether)s containing hole‐transport moieties from an isocyanate masked bisphenol

The design and synthesis of novel charge (hole‐ or electron‐) transport materials have been the focus of much research in recent years because of their wide variety of applications. In this study, three high molecular weight poly(arylene ether)s, 6a–c, containing naphthyl‐substituted benzidine moieties have been synthesized from carbamates derived from bisphenols. After masking with n‐propyl isocyanate, the carbamate is stable, can be readily purified by recrystallization from toluene, and can be polymerized directly with difluoro compounds under mild conditions. The resulting polymers possess high glass‐transition temperatures, excellent thermal stability, and good film‐forming properties. In comparison, the poly(arylene ether)s 6a′–c′, synthesized from unprotected bisphenol, have lower molecular weights and wider polydispersity and contain some brown impurities. Preliminary experiments show that both 6a and 6a′ can function well as hole‐transport materials in light‐emitting diodes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2740–2748, 2000     

Synthesis and characterization of poly(arylene ether sulfone)s with trans‐1,4‐cyclohexylene ring containing ester linkages

trans‐1,4‐Cyclohexylene ring containing acid chloride monomers were incorporated into poly(arylene ether sulfone) (PAES) backbones to study their effect on mechanical and thermal properties. The trans‐1,4‐cyclohexylene ring containing acid chloride monomers were synthesized and characterized by NMR and high‐resolution mass spectrum. trans‐1,4‐Cyclohexylene containing PAESs were synthesized from the acid chloride monomers and hydroxyl terminated polysulfone oligomers with a pseudo‐interfacial method and a solution method. These PAESs, with trans‐1,4‐cyclohexylene ring containing ester linkages, were fully characterized by NMR, thermogravimetric analysis, differential scanning calorimetry (DSC), size exclusion chromatography, and dynamic mechanical analysis (DMA). The tensile properties were also evaluated. The polymers made with the pseudo‐interfacial method had relatively low molecular weights when compared to the solution method where much higher molecular weight polymers were obtained. Crystallinity was promoted in the low molecular weight biphenol‐based PAES samples with the pseudo‐interfacial method. The crystallinity was confirmed by both the DSC and the wide angle X‐ray diffraction results. The tensile test results of the high molecular weight polymers suggested that incorporation of the trans‐1,4‐cyclohexylene ring containing linkage slightly improved the ultimate elongations while maintaining the Young's moduli. The trans‐1,4‐cyclohexylene ring containing PAESs also showed higher sub‐T_g relaxations in DMA when compared with their terephthaloyl containing analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Highly proton conducting proton‐exchange membranes based on fluorinated poly(arylene ether ketone)s with octasulfonated segments

A new bisphenol monomer containing a pair of electron‐rich tetra‐arylmethane units was designed and synthesized. Based on this monomer, along with commercial 4,4′‐(hexafluoroisopropylidene)diphenol A and 4,4′‐difluorobenzophenone, a series of novel poly(arylene ether ketone)s containing octasulfonated segments of varying molar percentage (x) (6F‐SPAEK‐x) were successfully synthesized by polycondensation reactions, followed by sulfonation. Tough, flexible, and transparent membranes, exhibiting excellent thermal stabilities and mechanical properties were obtained by casting. 6F‐SPAEK‐x samples exhibited appropriate water uptake and swelling ratios at moderate ion exchange capacities (IECs) and excellent proton conductivities. The highest proton conductivity (215 mS cm⁻¹) is observed for hydrated 6F‐SPAEK‐15 (IEC = 1.68 meq g⁻¹) at 100 °C, which is more than 1.5 times that of Nafion 117. Furthermore, the 6F‐SPAEK‐10 membrane exhibited comparable proton conductivity (102 mS cm⁻¹) to that of Nafion 117 at 80 °C, with a relatively low IEC value (1.26 meq g⁻¹). Even under 30% relative humidity, the 6F‐SPAEK‐20 membrane (2.06 meq g⁻¹) showed adequate conductivity (2.1 mS cm⁻¹) compared with Nafion 117 (3.4 mS cm⁻¹). The excellent comprehensive properties of these membranes are attributed to well‐defined nanophase‐separated structures promoted by strong polarity differences between highly ionized and fluorinated hydrophobic segments. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 25–37     

Selective detection of Hg2+ ion in aqueous medium with the use of 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one‐functionalized SBA‐15

An isatin‐based fluorophore, 3‐(pyrimidin‐2‐ylimino)indolin‐2‐one, was grafted on a large‐pore mesoporous silica material (SBA‐15) via a two‐step modification process. The obtained material (SBA‐Is‐Py) was characterized using various techniques and the characterization showed that the ordered porous structure was preserved after the post‐grafting procedure. The optical sensing ability of SBA‐Is‐Py was studied upon the addition of a variety of metal ions and a marked fluorescence quenching by Hg²⁺ ion was observed. SBA‐Is‐Py exhibited excellent Hg²⁺‐specific luminescence quenching over various competing cations. Furthermore, linear changes of the optical properties of SBA‐Is‐Py as a function of the concentrations of Hg²⁺ ion were found, with a calculated detection limit of 3.28 × 10^?7 M. In addition, SBA‐Is‐Py was successfully employed for the determination of Hg²⁺ in real water samples.