8-Hydroxyquinoline Functionalized Graphene Oxide: an Efficient Fluorescent Nanosensor for Zn<Superscript>2+</Superscript> in Aqueous Media

A nanosensor, based on 8-hydroxyquinoline functionalized graphene oxide, was developed for the fluorescence detection of Zn²⁺. It showed high selectivity and sensitivity for Zn²⁺ion in aqueous solution over other metal ions such as Li⁺, Na⁺, Ca²⁺, Mg²⁺, Al³⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Fe²⁺, Fe³⁺and Cr³⁺. Due to the linearity of the emission intensity toward Zn²⁺ concentration, fluorescent technique could be used for the detection of Zn²⁺ ion even at very low concentrations.     

A New Sensitive and Selective Off-On Fluorescent Zn<Superscript>2+</Superscript> Chemosensor Based on 3,3′,5,5′-Tetraphenylsubstituted Dipyrromethene

3,3′,5,5′-Tetraphenyl-2,2′-dipyrromethene was described as a highly sensitive and selective Off-on fluorescent colorimetric chemosensor for Zn²⁺ based on the chelation-enhanced fluorescence (CHEF) effect. The reaction of dipyrromethene ligand with Zn²⁺ induces the formation of the [ZnL₂] complex, which exhibits the increasing fluorescence in 120 fold compared with ligand in the propanol-1/cyclohexane (1:30) binary mixture. The Zn²⁺ detection limit was 1.4 × 10^?7 М. The UV-Vis and fluorescence spectroscopic studies demonstrated that the dipyrromethene sensor was highly selective toward Zn²⁺ cations over other metal ions (Na⁺, Mg²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Cd²⁺ and Pb²⁺), excluding Hg²⁺.     

Metal Complexation Properties of Schiff Bases Containing 1,3,5-Triazine Derived from 2-Hydroxy-1-Naphthaldehyde in Solution. A Simple Spectrofluorimetric Method to Determine Mercury (II)

Four new Schiff base ligands carrying naphthalene groups were prepared from the reaction of 2,4-diamino-6-methyl-1,3,5-triazine and 2,4-diamino-6-undecyl-1,3,5-triazine with 2-hydroxy-1-naphthaldehyde. The influence of a series of metal ions including Cu²⁺, Co²⁺, Hg²⁺, Al³⁺, Cr³⁺, Fe³⁺, Pb²⁺, Ni²⁺, Cd²⁺, Zn²⁺, Mn²⁺, Ag⁺, Ba²⁺, Ca²⁺ and Mg²⁺ on the spectroscopic properties of the ligands was investigated by means of absorption and emission spectrometry. The results of spectrophotometric and spectrofluorimetric titrations disclosed the complexation stoichiometry and complex stability constant of the ligands with metal ions. A simple spectrofluorimetric method was developed using the Schiff base derived from 2,4-diamino-6-undecyl-1,3,5-triazine to determine Hg²⁺ ion. No cleanup or enrichment of the tap water sample was required. A modified standard addition method was used to eliminate matrix effect. The standard addition graph was linear between 0.2 and 2.6 mg/L in determination of Hg²⁺. Detection and quantification limits were 0.08 and 0.23 mg/L, respectively. The simple and cost-effective method can be applied to water samples.     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Condensation Product of Phenylalanine and Salicylaldehyde: Fluorescent Sensor for Zn<Superscript>2+</Superscript>

The condensation product of phenylalanine and salicylaldehyde (L) was synthesised and characterised which was found to be selective fluorescent “off-on” sensor for Zn²⁺ ion with the detection limit 10^?5 M. The sensor is free of interferences from metal ions - Na⁺, K⁺, Al³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Pb²⁺, Cd²⁺ and Hg²⁺. The Fluorescence and the UV/visible spectral data reveals a 1:1 interaction between the sensor and Zn²⁺ ion with binding constant 10⁸. The DFT and TDDFT calculations confirm the structures of the sensor and the sensor-Zn²⁺ complex.     

Both “Naked-Eye” and Fluorescent Sensor for Hg2+ Based upon 8-Hydroxyquinoline

A chemosensor, 2,2′-(1,4-phenylenedivinylene)bis-8-acetoxyquinoline (1), its fluorescent sensing behavior toward representative alkali ions (Na⁺, K⁺), alkaline earth ions (Mg²⁺, Ca²⁺), and transition-metal ions (Ni²⁺, Cu²⁺, Zn²⁺, Hg²⁺, Pb²⁺, Cd²⁺) was intensively investigated. The compound (1) exhibited pronounced Hg²⁺ selective on–off-type fluoroionophoric properties among the representative ions in DMF/ethanol (1:9, v/v) solution. Moreover, the highly Hg²⁺-selective fluorescence quenching property in conjunction with a visible colorimetric change from colorless to light yellow can be observed, leading to potential fabrication of both “naked-eye” and fluorescent detection of Hg²⁺.     

Quinoline group grafted carbon nanotube fluorescent sensor for detection of Cu ion

A carbon nanotube-based fluorescent chemosensor MWNTs-glycine-N-8-quinolylamide (MWNTs-GNQ) has been designed and synthesized. Steady-state fluorescence emission studies showed that this material displays high selectivity and sensitivity for the Cu²⁺ ion over other cations such as Zn²⁺, Cd²⁺, Mg²⁺, Ca²⁺, and Ni²⁺.     

Boron-, nitrogen-, aluminum-, and phosphorus-doped graphite electrodes for non-lithium ion batteries

Intercalation of Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺, and Al³⁺ ions into B-, N-, Al-, and P-doped graphite has been studied using density functional theory calculations. While the intercalation of Li⁺, K⁺, and Ca²⁺ ions into graphite is thermodynamically favorable, that of Na⁺, Mg²⁺, Zn²⁺, and Al³⁺ ions into graphite is unfavorable. When doped in the form of graphitic structure, B, Al, and P dopants significantly stabilize the ion-intercalated graphite compounds. As a result, Na⁺ ions that are unable to intercalate into graphite can intercalate into B-, Al-, and P-doped graphite. The electron transfer from B, Al, and P dopants to host C atoms reinforces the ion–graphene electrostatic interaction, enhancing the thermodynamic driving force for ion intercalation. The catalytic activity of the dopant to promote the ion intercalation increases in the order of N < B < P < Al, which is associated with the electronegativity of the dopant.     

Luminescent Fluorene-Based Bis-Pyrazolyl Aniline Ligand for Aluminum Detection

The design, synthesis, and photophysical properties of a new fluorene-based fluorescent chemosensor, 4-((E)-2-(2-(benzo[d]thiazol-2-yl)-9,9-diethyl-9H-fluoren-7-yl)vinyl)-N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)benzenamine (AXF-Al), is described for the detection of Al³⁺. AXF-Al exhibited absorption at 382 nm and strong fluorescence emission at 542 nm (fluorescence quantum yield, Φ _F, of 0.80). The capture of Al³⁺ by the pyrazolyl aniline receptor resulted in nominal change in the linear absorption (372 nm) but a large hypsochromic shift of 161 nm in the fluorescence spectrum (542 to 433 nm, Φ _F?=?0.88), from which Al³⁺ was detected both ratiometrically and colorimetrically. The addition of other metal ions, namely Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg ²⁺ and Pb²⁺, produced only minimal changes in the optical properties of this probe. The emission band of this probe was also accessed by two-photon excitation in the near-IR, as two-photon absorption (2PA) is important for potential applications in two-photon fluorescence microscopy (2PFM) imaging. The 2PA cross section of the free fluorenyl ligand AXF-Al was 220 GM at 810 nm and 235 GM at 810 nm for the Al-ligand complex, practically useful properties for 2PFM.     

A Novel Highly Sensitive and Selective Fluorescent Sensor for Imaging Copper (II) in Living Cells

In this work, we designed and synthesized a novel quinolin-based derivative which exhibited signaling behaviors for Cu²⁺. Upon the addition of Cu²⁺ to the solution of the molecule, it displayed an obvious fluorescence quenching in a linear fashion due to the formation of a 1:1 metal–ligand complex. This fluorescent sensor exhibited a rare sensitivity toward Cu(II) (the level of magnitude could be 6?×?10^?8), a rapid response (<10 s) and also high selectivity toward Cu²⁺ over other metal ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe³⁺, Mn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, Zn²⁺ and Al³⁺. Simultaneously, the cell imaging experiments and filter paper test demonstrated its extensive applicability.     

N-benzoate-N′ salicylaldehyde ethynelediamine: A new fluorescent sensor for Zn2+ ion by “off-on” mode

Imbalance of zinc ion (Zn²⁺) in human body causes diseases like Alzheimer’s and Parkinson’s and therefore Zn²⁺ estimation in biological fluids has diagnostic values. Fluorescence “off-on” sensors have advantages of high sensitivity and in situ application over other sensors. A new fluorescent “off-on” Zn²⁺ sensor, N-benzoate-N′ salicylaldehyde ethynelediamine (L), has been synthesisied. In 1:1(v/v) CH₃OH:PBS (PBS?=?phosphate buffer solution), L shows ca. 20 times enhancement in fluorescence intensity on interaction with Zn²⁺, due to snapping of photoinduced electron transfer (PET) process, which is selective over metal ions - Na⁺, K⁺, Ca²⁺, Ni²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺. These metal ions either individually or all together does not interfere the sensing ability of L towards Zn²⁺. A 1:1 interaction between L and Zn²⁺ ion with binding constant 10^4.25 has been established from spectroscopic data.     

Sensing of Zn2+ion by N-Furfurylsalicylaldimine Based on CHEF Process†

The recognition ability of N-Furfurylsalicylaldimine (HL) toward various cations (Pb²⁺, Hg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Zn²⁺, Cu²⁺, Ni²⁺, Co²⁺, K⁺, Sr²⁺, and Na⁺) has been studied by UV–Vis and fluorescence spectroscopy. The compound showed highly selective fluorescence signaling behaviour for Zn²⁺ ions in methanol-water medium based on CHEF process and is capable of distinguishing Zn²⁺ from Cd²⁺ ion. From single crystal X-ray analysis it is revealed that a Zn²⁺ ion binds two ligand molecules through imine nitrogen and phenolate oxygen atom.

Rhod-5N as a Fluorescent Molecular Sensor of Cadmium(II) Ion

The photophysical and complexing properties of Rhod-5N (commercially available) in MOPS buffer are reported. This fluorescent molecular sensor consists of a BAPTA chelating moiety bound to a rhodamine fluorophore. Its fluorescence quantum yield is low and a drastic enhancement of fluorescence intensity upon cation binding was observed. Special attention was paid to the complexation with Cd²⁺, a well known toxic metal ion. Possible interference with other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Zn²⁺, Pb²⁺) was examined. Rhod-5N was found to be highly selective of Cd²⁺ over those interfering cations except Pb²⁺. The limit of detection is 3.1 μg l⁻¹.     

A New Piperidine Derivatized-Schiff Base Based “Turn-on” Cu<Superscript>2+</Superscript>Chemo-Sensor

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu²⁺ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu²⁺ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu²⁺ over other metal ions (Ni²⁺, Zn²⁺, Hg²⁺, Co²⁺, Cd²⁺, Al³⁺, Fe²⁺, and Pb²⁺). The binding stoichiometry between L and Cu²⁺ has been investigated using Job’s plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu²⁺ complex with binding constant (K _a) of 4?×?10⁴ LM^?1.     

A Selective Fluorescent Sensor for Hg2+

A novel rhodamine based fluorescent chemosensor RQP was prepared and characterized by ¹HNMR, ¹³CNMR and HR-MS. The properties of RQP were studied through UV–Vis spectroscopy and fluorescence spectroscopy. RQP showed highly selectivity toward Hg²⁺ over other metal ions, including Ag⁺, Cd²⁺, Cu²⁺, Na⁺, Mg²⁺, Ni²⁺, Pb²⁺, Fe³⁺, and Zn²⁺ in aqueous solutions. The recognition process is reversible and confirmed by EDTA experiment.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

A Novel Ratiometric Fluorescent Chemosensor for Cd2+

Novel ratiometric fluorescent chemosensor C7 was synthesized and characterized by UV–vis and fluorescence spectroscopy. C7 showed high sensitivity for Cd²⁺ among Na⁺, Mg²⁺, Cu²⁺, Pb²⁺, Ni²⁺, Fe³⁺, Zn²⁺, Ag⁺ Hg²⁺ and Cd²⁺ in ethanol.     

Interaction between 1-[p-(dimethylamino) benzoyl]-4′-phenyl-semicarbazide and Cu

A new compound, 1-[p-(dimethylamino)benzoyl]-4′-phenyl-semicarbazide (1) was synthesized and showed highly selective response to Cu²⁺ over other metal ions such as Pb²⁺, Mg²⁺, Fe²⁺, Co²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Ca²⁺, Ag⁺, Na⁺, K⁺, and Li⁺. The control compound, 1-[p-(dimethylamino)benzoyl]-4-phenyl-thiosemicarbazide (2), showed different fluorescence spectral response to Cu²⁺. A 1:1 complex between Cu²⁺ and 1 was formed while 1:1 and 1:2 complexes between Cu²⁺ and 2 were formed. The binding model between the receptor (1 or 2) and Cu²⁺ was supported by IR spectra, mass spectra, and computation model. 1 possessed higher selectivity towards Cu²⁺ compared with 2 owing to the difference of complexation ability between urea and thiourea groups.     

Salicylaldehyde Phenylhydrazone: A New Highly Selective Fluorescent Lead (II) Probe

The fluorescence intensity of salicylaldehyde phenylhydrazone (L), in 1:1 (v/v) CH₃OH:H₂O was enhanced by ca. 100 times with a blue shift in emission maximum, on interaction with Pb²⁺ ion. No enhancement in fluorescent intensity of L was observed on interaction with metal ions - Na⁺, K⁺, Ca²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cd²⁺ and Hg²⁺. This signal transduction was found to occur via photoinduced electron transfer (PET) mechanism. A 1:1 complexation between Pb²⁺ and L with log β?=?7.86 has been proved from fluorescent and UV/Visible spectroscopic data. The detection limit of Pb²⁺ was calculated to be 6.3?×?10^?7?M.     

A New Reactive 1,8-Naphthalimide Derivative for Highly Selective and Sensitive Detection of Hg<Superscript>2+</Superscript>

A 1,8-naphthalimide derivative with a reactive aliphatic hydroxyl was designed and synthesized as a fluorescent probe. Its structure was characterized by IR, ¹H NMR, ¹³C NMR, LC-MS and HPLC. The probe showed high selectivity and sensitivity to Hg²⁺ over other metal ions such as Pb²⁺, Na⁺, K⁺, Cd²⁺, Cr³⁺, Zn²⁺, Cu²⁺, Ni²⁺, Ca²⁺, Fe³⁺, Fe²⁺, Co²⁺, Mn²⁺ and Mg²⁺ in MeCN/H₂O (15/85, v/v). The increase in fluorescence intensity was linearly proportional to the concentration of Hg²⁺ in the range of 18–40 μM with a detection limit of 1.38 × 10^?7 mol/L. The probe could work in a pH span of 4.3–9.0 and respond to Hg²⁺ quickly with strong anti-interference ability. Job’s plot suggested a 1:2 complex of the probe and Hg²⁺.