共查询到20条相似文献,搜索用时 10 毫秒
1.
Shengsheng Liu Ayusman Sen 《Journal of polymer science. Part A, Polymer chemistry》2004,42(24):6175-6192
The living/controlled copolymerization of methyl acrylate with 1‐alkenes and norbornene derivatives through several radical polymerization techniques has been achieved. These techniques include atom transfer radical polymerization, reversible addition–fragmentation transfer polymerization, nitroxide‐mediated polymerization, and degenerative transfer polymerization. These systems display many of the characteristics of a living polymerization process: the molecular weight increases linearly with the overall conversion, but the polydispersity remains low. Novel block copolymers have been synthesized through the sequential addition of monomers or chain extension. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6175–6192, 2004 相似文献
2.
Francisco‐Javier Lpez‐Villanueva Frederik Wurm Andreas F. M. Kilbinger Holger Frey 《Macromolecular rapid communications》2007,28(6):704-709
A facile two‐step synthesis for branched poly(isoprene)s (PI) based on polyaddition of ABn‐type macromonomers is described. The synthesis of the macromonomers was achieved by anionic polymerization of isoprene and subsequent end‐capping of the polymers by addition of chlorodimethylsilane to the living carbanions. This led to PI‐based macromonomers with narrow polydispersity ( / < 1.15) and molecular weights in the range of 1 700 – 22 100 g · mol−1. Synthesis of the branched polymers was carried out by a hydrosilylation‐based polymerization of the macromonomers. Characterization via SEC, SEC‐MALLS, coupled SEC‐viscosimetry and 1H‐NMR‐spectroscopy supported the formation of branched structures. Interestingly, these branched polymers exhibited α‐values that were similar to those reported for hyperbranched polymers based on AB2‐monomers.
3.
Albert Badri Michael R. Whittaker Per B. Zetterlund 《Journal of polymer science. Part A, Polymer chemistry》2012,50(15):2981-2992
Graphene nanosheets possess a range of extraordinary physical and electrical properties with enormous potential for applications in microelectronics, photonic devices, and nanocomposite materials. However, single graphene platelets tend to undergo agglomeration due to strong π–π and Van der Waals interactions, which significantly compromises the final material properties. One of the strategies to overcome this problem, and to increase graphene compatibility with a receiving polymer host matrix, is to modify graphene (or graphene oxide (GO)) with polymer brushes. The research to date can be grouped into approaches involving grafting‐from and grafting‐to techniques, and further into approaches relying on covalent or noncovalent attachment of polymer chains to the suitably modified graphene/GO. The present Highlight article describes research efforts to date in this area, focusing on the use of controlled/living radical polymerization techniques. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 相似文献
4.
Xiaoshan Fan Guowei Wang Junlian Huang 《Journal of polymer science. Part A, Polymer chemistry》2011,49(6):1361-1367
Macrocyclic molecular brushes c‐PHEMA‐g‐(PS‐b‐PEO) consisting of macrocyclic poly(2‐hydroxylethyl methacrylate) (c‐PHEMA) as backbone and polystyrene‐b‐poly(ethylene oxide) (PS‐b‐PEO) amphiphilic block copolymers as side chains were synthesized by the combination of atom transfer radical polymerization (ATRP), click chemistry, and single‐electron transfer nitroxide radical coupling (SET‐NRC). First, a linear α‐alkyne‐ω‐azido heterodifunctional PHEMA (l‐HC?C‐PHEMA‐N3) was prepared by ATRP of HEMA using 3‐(trimethylsilyl)propargyl 2‐bromoisobutyrate as initiator, and then chlorine end groups were transformed to ? N3 group by nucleophilic substitution reaction in DMF in the presence of an excess of NaN3. The 3‐trimethylsilyl groups could be removed in the presence of tetrabutylammonium fluoride, and the product was cyclized by “click” chemistry in high dilution conditions. The hydroxyl groups on c‐PHEMA were transferred into bromine groups by esterification with 2‐bromoisobutyryl bromide and then initiate the ATRP of styrene. The formed macrocyclic molecular brushes c‐PHEMA‐g‐PS were coupled with the TEMPO‐PEO to afford the target macrocyclic molecular brushes c‐PHEMA‐g‐(PS‐b‐PEO) by SET‐NRC, and the efficiency is as high as 80~85%. All of the intermediates and final product were characterized with 1H NMR, Fourier transform infrared (FTIR), and gel permeation chromatography in details © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
5.
István M. Mándity Edit Wéber Tamás A. Martinek Dr. Gábor Olajos Gábor K. Tóth Prof. Dr. Elemér Vass Dr. Ferenc Fülöp Prof. Dr. 《Angewandte Chemie (International ed. in English)》2009,48(12):2171-2175
Assembly language : The programmed sequences of stereochemical building blocks lead to novel biomimetic helices. The rational design approach offers new possibilities for creating periodic secondary structures.
6.
Zhang A Zhang B Wächtersbach E Schmidt M Schlüter AD 《Chemistry (Weinheim an der Bergstrasse, Germany)》2003,9(24):6083-6092
A homologous series of first- to fourth-generation (G1-G4) dendronized macromonomers, 5, 7, 10, and 12, was synthesized, and their polymerization behavior under radical conditions investigated. These conditions were thermally induced radical polymerization (TRP) and atom-transfer radical poymerization (ATRP). TRP was applied to all monomers and gave polymers PG1-PG4, whose molar masses range from several millions for PG1 to estimated several hundreds of thousands for PG2 and PG3, and to the oligomeric regime for PG4. ATRP was applied only to the G1 and G2 monomers 5 and 7. Kinetic studies on monomer 5 provide evidence that its polymerization proceeds in a controlled fashion. The highest monomer-to-initiator ratios which still gave monomodal molar mass distributions were 300:1 (for 5) and 100:1 (for 7), which correspond to achievable molar mass regime for PG1 and PG2 of approximately M(n)=100 000 (DP(calcd)(PG1)=200, DP(calcd)(PG2)=90). The polydispersities lie in the usual range (PDI=1.1-1.2). The molar masses were determined by GPC in DMF with calibration against absolute molar masses of PG1 determined by light scattering. 相似文献
7.
Chiaki Yoshikawa Atsushi Goto Yoshinobu Tsujii Norio Ishizuka Kazuki Nakanishi Takeshi Fukuda 《Journal of polymer science. Part A, Polymer chemistry》2007,45(21):4795-4803
The interaction of concentrated polymer brushes with proteins was chromatographically investigated. By the use of surface‐initiated atom transfer radical polymerization, a low‐polydispersity poly(2‐hydroxyethyl methacrylate) (PHEMA) was densely grafted onto the inner surfaces of silica monoliths with mesopores of about 50 and 80 nm in mean size. The graft density reached 0.4–0.5 chains/nm2. The 80‐nm‐mesopore monolithic column with the concentrated PHEMA brush was characterized through the elution of low‐polydispersity pullulans with different molecular weights, clearly showing two modes of size exclusion, that is, one by the mesopores and the other by the brush phase. The latter mode gave a sharp separation with a critical molecular weight (size‐exclusion limit) of about 1000. This molecular size of pullulan was comparable to the distance between the nearest‐neighbor graft points. The elution behaviors of five proteins of different sizes (bovine serum thyroglobulin, bovine serum immunoglobulin G, bovine serum albumin, horse heart myoglobin, and bovine serum aprotinin) were studied with this PHEMA‐grafted column. The smallest protein, aprotinin, with a pullulan‐reduced molecular weight slightly larger than the critical value of 1000, was eluted much behind the corresponding pullulan, and this indicated that it barely got into the brush layer, suffering from a strong affinity interaction within the brush. On the other hand, the other four larger proteins were eluted at the same elution volumes as the equivalent pullulans, and this meant that they were perfectly excluded from the brush layer and separated only in the size‐exclusion mode by the mesopores without an affinity interaction with the brush surface. This excellent inertness of the concentrated brush in the interaction with the large proteins should afford the system long‐term stability against biofouling. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4795–4803, 2007 相似文献
8.
Prodip Sarker Saif U. R. Rehman Stephen Rimmer 《Journal of polymer science. Part A, Polymer chemistry》2013,51(8):1822-1830
Poly(1,1‐bis(ethoxycarbonyl)‐2‐vinyl cyclopropane (ECVP)‐graft‐dimethyl siloxane) copolymers were prepared using a macromonomer approach. Poly(dimethyl siloxane) (PDMS) macromonomers were prepared by living anionic polymerization of cyclosiloxanes followed by sequential chain‐end capping with allyl chloroformate. These macromonomers were then copolymerized with ECVP. MALDI‐ToF mass spectrometry and 1H NMR spectroscopy were used to show that the macromonomers had approximately 80% of the end groups functionalized with allyl carbonate groups. Gradient polymer elution chromatography showed that high yields of the graft copolymers were obtained, along with only small fractions of the PECVP and PDMS homopolymers. Differential scanning calorimetry showed that the low glass transition temperature (Tg) of the PDMS component could be maintained in the graft copolymers. However, the Tg was a function of polymer composition and the polymers produced had Tgs that ranged from ?50 to ?120 °C. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013 相似文献
9.
Yongfang Yang Jian Zhang Li Liu Chenxi Li Hanying Zhao 《Journal of polymer science. Part A, Polymer chemistry》2007,45(24):5759-5769
An ammonium free radical initiator was ion exchanged onto the surface of clay layers. Polystyrene (PS) and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) mixed polymer brushes on the surface of clay layers were prepared by in situ free radical polymerization. PS colloid particles armored by clay layers with mixed polymer brushes were prepared by Pickering suspension polymerization. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the colloid particles. Clay layers on the surface of PS colloid particles can be observed. Because of the cationic nature of the PDMAEMA brushes the colloid particles have positive zeta potentials at low pH values. X‐ray photoelectron spectroscopy (XPS) was used to analyze the surface of the colloid particles. N1s binding energy of PDMAEMA chains on the surface of clay layers was detected by XPS. The two peaks of the N1s binding energy indicate two different nitrogen environments on the surface of clay layers. The peak with a lower binding energy is characteristic of neutral nitrogen on PDMAEMA chains, and the peak with a higher binding energy is attributed to protonated nitrogen on PDMAEMA chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5759–5769, 2007 相似文献
10.
Hideyuki Kaneko Shin-ichi Kojoh Nobuo Kawahara Shingo Matsuo Tomoaki Matsugi Norio Kashiwa 《Macromolecular Symposia》2004,213(1):335-346
Polymacromonomers with polyolefin branches were successfully synthesized by free-radical homopolymerization of polyolefin macromonomer with a methacryloyl end group. Propylene-ethylene random copolymer (PER) with a vinylidene end group was prepared by polymerization using a metallocene catalyst. Then, the unsaturated end group was converted to a hydroxy end group via hydroalumination and oxidation. The PER with the hydroxy end group was easily reacted with methacryloyl chloride to produce methacryloyl-terminated PER (PER macromonomer; PERM). The free-radical polymerization of thus-obtained PERM was done using 2,2′-azobis(isobutyronitorile) (AIBN) as a free-radical initiator. From NMR analyses, the obtained polymers were identified as poly(PERM). Based on gel permeation chromatography (GPC), the estimated degree of polymerization (Dp) of these polymers were about 30. Thus, new class of polymacromonomers with polyolefin branches was synthesized. 相似文献
11.
12.
Jean-François Lahitte Frédéric Peruch François Isel Pierre Joseph Lutz 《Macromolecular Symposia》2004,213(1):253-264
The present work discusses the synthesis of well-defined comb-shaped polymers or graft copolymer structures based on coordination (co)polymerization of macromonomers. Polystyrene macromonomers with various polymerizable entities were synthesized first by induced deactivation reactions. The homopolymerization of these macromonomers in the presence of selected early or late transition metal catalysts was examined. Comb-shaped polymers could be obtained over a large range of DP values. The results were compared to those obtained by anionic homopolymerization. Some results on the copolymerization of these PS macromonomers with ethylene in the presence of VERSIPOLTM type catalysts were presented. 相似文献
13.
A. Sinaga P. Ravi T. A. Hatton K. C. Tam 《Journal of polymer science. Part A, Polymer chemistry》2007,45(13):2646-2656
A new hybrid amphiphilic system between a polyacrylic acid (PAA) synthetic segment, and a hydrophobic β‐sheet forming peptide segment, poly(L ‐valine) (PLVAL) was synthesized using a combination of Atom Transfer Radical Polymerization, Click Chemistry, and Nickel catalyzed ring opening of L ‐valine N‐carboxyanhydride. This is the first reported use of Click Chemistry as an intermediary step for the ω‐amino functionalization of polymers to obtain macroinitiators that are free from deactivating or interfering molecules to be used in subsequent Ni‐catalyzed ring opening reaction. The efficiency of the end‐group functionalization in the macroinitiator is about 90%. Three different PAA‐b‐PLVAL hybrid copolymers with molecular weight range of 8000–15,000 and Mw/Mn <1.3 had been prepared by varying the monomer to macroinitiator ratio. In addition, the highest achievable molecular weight in the copolymerization was found to be limited by the solubility of the growing chains. This combined synthetic approach can potentially be extended for the synthesis of a multitude of other peptide hybrid systems, and hence will be of interest in the preparation of peptide hybrid systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2646–2656, 2007 相似文献
14.
Takashi Morinaga 《European Polymer Journal》2007,43(1):243-248
Hybrid particles which have a core of monodisperse silica particle and a shell of well-defined poly(methyl methacrylate) chains end-grafted on the core surface with a surface density as high as 0.8 chains/nm2 were prepared by surface-initiated atom transfer radical polymerization of methyl methacrylate with an initiator-fixed silica particle. Monolayers of the hybrid particles were formed at the air-water interface by depositing a defined amount of the particle suspension onto water surface. Transmission electron microscopic and atomic force microscopic observations of these monolayers showed that the hybrid particles formed a two-dimensional hexagonally ordered lattice with a wide controllability of interparticle distance. This lattice structure was utilized as a template for the fabrication of a negatively patterned surface of poly(dimethylsiloxane) elastomer. 相似文献
15.
16.
17.
Takahiro Harada Per B. Zetterlund Bunichiro Yamada 《Journal of polymer science. Part A, Polymer chemistry》2004,42(3):597-607
The unsaturated dimer of methyl acrylate [CH2C(CO2CH3)CH2CH2CO2CH3, or MAD] was copolymerized with various monomers to prepare copolymers bearing the ω-unsaturated end group [CH2C(CO2CH3)CH2 ] arising from β fragmentation of the MAD propagating radical. Copolymerizations of MAD with cyclohexyl and n-butyl acrylate resulted in copolymers with ω-unsaturated end groups, and increasing the temperature up to 180 °C resulted in an increase in the rate of β fragmentation of MAD radicals relative to propagation. Only a small amount of unsaturated end groups was introduced by copolymerization with ethyl methacrylate (EMA), and the EMA content in the copolymer increased with temperature. These findings could be explained by the reversible addition of the poly(EMA) radical to MAD. The copolymerization with ethyl α-ethyl acrylate (EEA) did yield a copolymer containing unsaturated end groups with MAD units as part of the main chain, although the steric hindrance of the ethyl group suppressed homopropagation and crosspropagation of EEA, resulting in low polymerization rates. Therefore, the copolymerization of MAD with acrylic esters at high temperatures was noted as a convenient route for obtaining acrylate–MAD copolymers bearing unsaturated end groups at the ω end (macromonomer). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 597–607, 2004 相似文献
18.
Wen Li Dalin Wu A. Dieter Schlüter Afang Zhang 《Journal of polymer science. Part A, Polymer chemistry》2009,47(23):6630-6640
An improved strategy to synthesize oligo(ethylene glycol)‐based secondary generation (G2) dendron is presented. The overall synthesis efficiency increased by 50% when comparing to the previous method, and the product purification by column chromatography becomes much easier. Based on this approach, the synthesis of the third‐generation (G3) dendrons and the corresponding methacrylate‐based G3 macromonomer becomes feasible. Because of the oil characteristics of this macromonomer, its polymerization was able to be conducted in bulk with AIBN as the initiator. The polymerization degree of the third‐generation dendronized polymer ( PG3 ) was found to be around 16 based on GPC measurement. The thermally induced dehydration processes of this polymer were monitored by temperature‐varied proton NMR spectroscopy, and its thermoresponsive behaviors were investigated with turbidity measurements using UV–vis spectroscopy. Similar to the lower generation counterparts, this threefold branched dendronized polymer also shows characteristic fast and sharp phase transitions around its apparent lower critical solution temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6630–6640, 2009 相似文献
19.
Hideyuki Kaneko Shin‐ichi Kojoh Nobuo Kawahara Shingo Matsuo Tomoaki Matsugi Norio Kashiwa 《Journal of polymer science. Part A, Polymer chemistry》2005,43(21):5103-5118
Graft and star copolymers having poly(methacrylate) backbone and ethylene–propylene random copolymer (EPR) branches were successfully synthesized by radical copolymerization of an EPR macromonomer with methyl methacrylate (MMA). EPR macromonomers were prepared by sequential functionalization of vinylidene chain‐end group in EPR via hydroalumination, oxidation, and esterification reactions. Their copolymerizations with MMA were carried out with monofunctional and tetrafunctional initiators by atom transfer radical polymerization (ATRP). Gel‐permeation chromatography and NMR analyses confirmed that poly(methyl methacrylate) (PMMA)‐g‐EPR graft copolymers and four‐arm (PMMA‐g‐EPR) star copolymers could be synthesized by controlling EPR contents in a range of 8.6–38.1 wt % and EPR branch numbers in a range of 1–14 branches. Transmission electron microscopy of these copolymers demonstrated well‐dispersed morphologies between PMMA and EPR, which could be controlled by the dispersion of both segments in the range between 10 nm and less than 1 nm. Moreover, the differentiated thermal properties of these copolymers were demonstrated by differential scanning calorimetry analysis. On the other hand, the copolymerization of EPR macromonomer with MMA by conventional free radical polymerization with 2,2′‐azobis(isobutyronitrile) also gave PMMA‐g‐EPR graft copolymers. However, their morphology and thermal property remarkably differed from those of the graft copolymers obtained by ATRP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5103–5118, 2005 相似文献
20.
Bunichiro Yamada Fuminori Oku Takahiro Harada 《Journal of polymer science. Part A, Polymer chemistry》2003,41(5):645-654
The addition of propagating radicals of methyl acrylate (MA) and styrene (St) to CH2?C(CO2CH3)CH2? and CH2?C(C6H5)CH2? ω‐end groups of poly(methyl methacrylate) (PMMA) and polystyrene (PSt) was investigated. The end groups were as reactive as MA and St toward the poly(methyl acrylate) (PMA) and PSt radicals, respectively. The adduct radical derived from the two types of PMMA end groups and PMA radicals underwent β fragmentation exclusively to yield PMMA radicals and end groups bound to PMA chains. The addition of PSt radicals to PMMA with CH2?C(CO2Me)CH2? end groups resulted in adduct radicals that underwent β fragmentation and addition to St or coupling with PSt radicals. Adduct radicals formed by the addition of PMA radicals to both types of end groups of PSt exclusively formed C? C bond by coupling with PMA radicals to form branched structures or by addition to MA monomer to give a copolymer. The fate of the adduct radicals was highly dependent on the type of polymer chain and the substituent bound to the end group. Steric congestion of the adduct radical arising from the α‐methyl group of the PMMA chain was considered to be crucial for fragmentation to expel the PMMA radical. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 645–654, 2003 相似文献