Synthesis of pH‐responsive photocrosslinked hyaluronic acid‐based hydrogels for drug delivery

Photocrosslinked hyaluronic acid/poly(vinyl alcohol)‐styrylpyridinium (HA/PVA‐SbQ) hydrogels were synthesized for controlled antitumor drug delivery. The photocrosslinking reaction was rapid, and the time required for completely converting into the insoluble hydrogels was less than 500 s on exposure to 5 mW/cm² UV light irradiation. The resulting hydrogels exhibited sensitivity to the pH value of the surrounding environment. Scanning electron microscopic analysis revealed that the morphology and the pore size of the hydrogels could be controlled by changing the ratio of HA and PVA‐SbQ in the formulations. Paclitaxel (PTX)‐loaded hydrogel could also be formed rapidly by UV irradiation of a mixed solution of HA/PVA‐SbQ and PTX. Release profiles of PTX from the hydrogels showed pH‐dependent and sustained manner. Moreover, our data revealed that PTX released from the HA hydrogels remained biologically active and had the capability to kill cancer cells. In contrast, control groups of HA hydrogels without PTX did not exhibit any cytotoxicity. This study demonstrates the feasibility of using HA‐based hydrogels as a potential carrier for chemotherapeutic drugs for cancer treatments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dynamics of cyclodimerization and viscoelasticity of photo‐crosslinkable PVA

We investigated the interfacial properties of poly(vinyl alcohol) carrying UV‐crosslinkable pendant quaternized stilbazole (styrylpyridinium), PVA‐SbQ. The extent and dynamics of PVA‐SbQ cyclodimerization reactions and crosslinking induced by UV irradiation were monitored in situ and in real time by quartz crystal microgravimetry (QCM). Sensograms reflecting time‐dependent changes in density and viscoelasticity of crosslinking films followed a Boltzmann sigmoidal model, depending on precursor film composition and irradiation power. The shifts in QCM frequency and energy dissipation upon PVA‐SbQ cyclodimerization correlated with three photo‐crosslinking phases involving soft‐to‐rigid transitions, namely, induction (initiation), main crosslinking (interaction), and termination. PVA‐SbQ films crosslinked to different degree were used as protein carriers and a slower release profile was determined for the films that underwent more extensive crosslinking. Overall, this study demonstrates for the first time the dynamics of PVA‐SbQ crosslinking and its impact in system viscoelasticity and protein release. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 345–355     

Formation and dichroism of poly(vinyl alcohol)–iodine complex in photocurable film

The formation of polyiodine complexes was investigated in a photocurable poly(vinyl alcohol) modified N‐methyl‐4(4′‐formylstyryl)pyridinium methosulfate acetal (PVA‐SbQ), which is a photofunctional group that causes photodimerization. PVA‐SbQ films with polyiodine complexes were prepared to be photocured, iodinated and soaked in a boric acid solution. The formation of PVA–polyiodine complexes was studied during iodinating and while in the boric acid treatment through UV–vis absorption spectrometry, resonance Raman spectrometry and IR absorption spectrometry. As a result, polyiodines were formed in the photocurable PVA‐SbQ films, and the formation of PVA–polyiodine complexes was enhanced by boric acid treatment. It was found that the SbQ‐ratio of PVA‐SbQ affects the formation of PVA–polyiodine complexes. The photocrosslinking by the dimerization of SbQ groups helps to form the PVA–I₅⁻ complex during the boric acid treatment. Based on this effect, we demonstrated a unique recording method by the PVA–polyiodine complex formation. The PVA‐SbQ film cured by the irradiation of the liner polarized light showed that dichroism of the PVA–polyiodine complexes formed after iodination. Copyright © 2015 John Wiley & Sons, Ltd.     

Spin Self‐Assembled Clay Nanocomposite Passivation Layers Made from a Photocrosslinkable Poly(vinyl alcohol) and Na+‐Montmorillonite Enhance the Environmental Stability of Organic Thin‐Film Transistors

We investigated the effects of the multilayer polymer‐clay nanohybrid passivation films on the stability of pentacene organic thin‐film transistors (OTFTs) exposed to air and UV irradiation. Well‐ordered multilayer films were deposited by the spin‐assisted layer‐by‐layer assembly method using photocrosslinkable poly(vinyl alcohol) with the N‐methyl‐4(4′‐formylstyryl)pyridinium methosulfate acetal group (SbQ‐PVA) and Na⁺‐montmorillonite in a water‐based solution process. When photocrosslinked, these SbQ‐PVA/clay multilayers were found to serve as excellent barriers to O₂ and UV‐light. Moreover, when used as passivation layers, they enhanced the stability of pentacene OTFT devices exposed to air and UV radiation.     

Copolymerization of poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) with designed molecular structure by a solid‐state polymerization method

Poly(vinyl alcohol)‐graft‐poly(1,4‐dioxan‐2‐one) (PVA‐g‐PPDO) with designed molecular structure was synthesized by a solid‐state polymerization. The solid‐state copolymerization was preceded by a graft copolymerization of PDO initiated with PVA as a multifunctional initiator, and Sn (Oct)₂ as a coininitiator/catalyst in a homogeneous molten state. The polymerization temperature was then decreased and the copolymerization was carried out in a solid state. The products prepared by solid‐state polymerization were characterized by ¹H NMR and DSC, and were compared with those synthesized in the homogeneous molten state. The degree of polymerization (D_p), degree of substitution (D_s), yield and the average molecular weight of the graft copolymer with different molecular structure were calculated from the ¹H NMR spectra. The results show that the crystallization process during the solid‐state polymerization may suppress the undesirable inter‐ or intramolecular side reactions, then resulting in a controlled molecular structure of PVA‐g‐PPDO. The results of DSC measurement show that the molecular structures determine the thermal behavior of the PVA‐g‐PPDO. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3083–3091, 2006     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226     

Micellar polymerization of amphiphilic poly(vinyl alcohol) macromonomer having a methacrylate end group prepared by aldol‐type group‐transfer polymerization

Amphiphilic and heterotactic‐rich poly(vinyl alcohol) (PVA) macromonomer, that is, PVA having a phenyl or phenoxyethyl methacrylate unit as the polymerizable end group, was synthesized via the aldol‐type group‐transfer polymerization (aldol‐GTP) technique. Aldol‐GTPs of vinyloxytriethylsilane (VOTES) were carried out in dichloromethane with 4‐methacryloylbenzaldehyde and 4‐(2‐methacryloylethoxy)benzaldehyde as the initiators with various Lewis acids. The polymerizations proceeded smoothly to give silylated PVA macromonomers (number‐average molecular weights: 1.3 × 10³–1.96 × 10⁴). Poly(VOTES) was easily desilylated to give heterotactic‐rich PVA macromonomer in good yield. The critical micelle concentration of the PVA macromonomer was determined by surface‐tension measurement. Micellar polymerization of the amphiphilic macromonomer gave comb‐shaped (graft) polymer having PVA side chains effectively (conversion: 80–82%), whereas polymerization in dimethyl sulfoxide (homogeneous state) did not. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4477–4484, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

In situ polymerization and morphology of polypyrrole obtained in water‐soluble polymer templates

Several water‐soluble polymers were used as templates for the in situ polymerization of pyrrole to determine their effect on the generation of nanosized polypyrrole (PPy) particles. The polymers used include: polyvinyl alcohol (PVA), polyethylene oxide (PEO), poly(vinyl butyral), polystyrene sulfonic acid, poly(ethylene‐alt‐maleic anhydride) (PEMA), poly(octadecene‐alt‐maleic anhydride), poly(N‐vinyl pyrrolidone), poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate), poly(N‐isopropyl acrylamide), poly(ethylene oxide‐block‐propylene oxide), hydroxypropyl methyl cellulose, and guar gum. The oxidative polymerization of pyrrole was carried out with FeCl₃ as an oxidant. The morphology of PPy particles obtained after drying the resulting aqueous dispersions was examined by optical microscopy, and selected samples were further analyzed via atomic force microscopy. Among the template polymers, PVA was the most efficient in generating stable dispersions of PPy nanospheres in water, followed by PEO and PEMA. The average size of PPy nanospheres was in the range of 160 nm and found to depend on the molecular weight and concentration of PVA. Model reactions and kinetics of the polymerization reaction of pyrrole in PVA were carried out by hydrogen ¹H NMR spectroscopy using ammonium persulfate as an oxidant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Durable and refreshable polymeric N‐halamine biocides containing 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin

A novel vinyl‐hydantoin monomer, 3‐(4′‐vinylbenzyl)‐5,5‐dimethylhydantoin, was synthesized in a good yield and was fully characterized with Fourier transform infrared (FTIR) and ¹H NMR spectra. Its homopolymer and copolymers with several common acrylic and vinyl monomers, such as vinyl acetate, acrylonitrile, and methyl methacrylate, were readily prepared under mild conditions. The polymers were characterized with FTIR and ¹H NMR, and their thermal properties were analyzed with differential scanning calorimetry studies. The halogenated products of the corresponding copolymers exhibited potent antibacterial properties against Escherichia coli, and the antibacterial properties were durable and regenerable. The structure–property relationships of the polymers were further discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3348–3355, 2001     

Spectral assignment of poly(vinyl acetate) by one and two dimensional NMR spectroscopy: Revisited

Poly(vinyl acetate) (PVA) prepared by photopolymerization was studied by a combination of one and two dimensional NMR spectroscopy. The ¹³C{¹H} and ¹H NMR spectra of the homopolymer (PVA) were assigned to the configurational pentads (CH region) and tetrads (CH₂ region). These assignments were substantiated by the use of two dimensional heteronuclear single quantum correlation (HSQC), heteronuclear single quantum correlation‐total correlation spectroscopy (HSQC‐TOCSY) and double quantum filtered correlation spectroscopy (DQFCOSY) experiments. The results obtained by the analysis of the area under the resonance signals confirmed that PVA obeys Bernoullian statistics. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 551–556, 1999     

Bis‐substituted thiophene‐containing oxime sulfonates photoacid generators for cationic polymerization under UV–visible LED irradiation

Three novel types of thiophene‐containing oxime sulfonates with a big π‐conjugated system were reported as non‐ionic photoacid generators. The irradiation of the newly synthesized photoacid generators using near UV–visible light‐emitting diodes (LEDs) (365–475 nm) results in the cleavage of two weak N O bonds in single molecules, which lead to the generation of different sulfonic acids in good quantum and chemical yields. The mechanism for the N O bond cleavage for acid generation was supported by the UV–visible spectra and real‐time ¹H NMR spectra. They are developed as high‐performance photoinitiators without any additives for the cationic polymerization of epoxide and vinyl ether upon exposure to near‐UV and visible LEDs (365–475 nm) at low concentration. In the field of photopolymerization, especially visible light polymerization, it has great potential for application. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 776–782     

Synthesis of well‐defined azide‐terminated poly(vinyl alcohol) and their subsequent modification via click chemistry

A new azide‐functionalized xanthate, S‐(4‐azidomethylbenzyl) O‐(2‐methoxyethyl) xanthate, was synthesized and used to mediate the reversible addition fragmentation chain transfer polymerization of vinyl acetate. The polymerization was demonstrated to be controlled, and well‐defined PVAc with α‐azide, ω‐xanthate groups were obtained, the xanthate groups of which were further removed by radical‐induced reduction with lauroyl peroxide in the presence of excess 2‐propanol. Hydrolysis of α‐azide‐terminated PVAc (N₃‐PVAc) led to the formation of the corresponding α‐azide‐terminated PVA (N₃‐PVA). Finally, end‐modification of N₃‐PVA by click chemistry with alkyne‐end‐capped poly(caprolactone) (A‐PCL), alkynyl‐mannose, and alkynyl‐pyrene was carried out to obtain a new block copolymer PCL‐b‐PVA, and two PVA with mannose or pyrene as the end functional groups. The polymers were characterized by gel permeation chromatography, ¹H NMR spectroscopy, and FTIR. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4494–4504, 2009     

Synthesis of water‐soluble perylenediimide‐functionalized polymer through esterification with poly(vinyl alcohol)

A new material has been prepared by covalent attachment of a perylene derivative, N‐(carboxyphenyl)‐N′‐(8‐pentadecyl)perylene‐3,4:9,10‐bis(dicarboximide) (PDI‐COOH), to poly(vinyl alcohol) (PVA) by esterification. The perylenediimide (PDI)‐modified PVA polymers are soluble in water and dimethylsulfoxide (DMSO). This solubility is conferred to the insoluble perylene derivative by the water‐soluble polymer. The materials have been characterized by hydrogen‐nuclear magnetic resonance, Fourier transform infrared spectra, X‐ray diffraction, and X‐ray photoelectron spectroscopy confirming the covalent attachment of the PDI to the polymer chains. The significant changes in the crystalline parameters and the thermal stability observed for the polymer after the esterification also confirm the covalent linkage with PDI. In addition, the PDI‐modified PVA shows good fluorescence both in solution (quantum yield ～0.2–0.25) and in solid suggesting that the PDI retains largely its photochemical and photophysical properties after immobilization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3613–3622, 2010     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009     

Electroluminescent copolymers based on dihexylfluorene and 2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile units

A series of statistical copolymers (poly[(9,9‐di‐n‐hexylfluorene)‐co‐2‐{2,6‐bis‐[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were synthesized by the Suzuki coupling reaction. The copolymers showed absorption bands at 379 and 483–489 nm, which were attributed to the oligofluorene segments and the segments containing 2‐[2,6‐bis(2‐{4‐[(4‐bromophenyl)phenylamino]phenyl}vinyl)pyran‐4‐ylidene]malononitrile ( 3 ), respectively. The absorption band around 483–489 nm increased with the feed ratio of 3 . The photoluminescence (PL) spectra of the copolymers showed emission bands at 420 and 573–620 nm. As the feed ratio of 3 increased, the PL emission in the longer wavelength region redshifted, and the intensity increased as well. The electroluminescence (EL) spectrum of the copolymers showed a very weak emission at 420 nm. The PL and EL emission colors redshifted dramatically with the increase in the feed ratio of 3 . The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the model compound (2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were determined to be ?5.34 and ?3.14 eV, respectively. It was concluded that energy transfer took place from the oligofluorene blocks to the segments containing 3 and that direct charge trapping occurred in the segments containing 3 during the EL operation. The Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of the copolymer (x = 0.63, y = 0.37) containing 10 mol % 3 were very close to those (x = 0.67, y = 0.33) for National Television System Committee (NTSC) red with a maximum photometric power efficiency of 0.27 cd/A. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3729–3737, 2006     

Interaction of water in polymers: Poly(ethylene‐co‐vinyl acetate) and poly(vinyl acetate)

We studied the interaction of water in poly(ethylene‐co‐vinyl acetate) of various vinyl acetate compositions and poly(vinyl acetate), on the basis of the infrared spectrum of the water dissolved therein. The spectrum shows a very sharp and distinct band at about 3690 cm^?1 (named as A), and less‐sharp two bands around 3640 (B) and 3550 cm^?1 (C), the A band being outstanding especially at a low vinyl acetate composition. As the vinyl acetate composition increases, the A band decreases in intensity relative to the C band, whereas the B band increases contrarily. Analysis of the spectral change has elucidated that one‐bonded water (of which one OH is hydrogen‐bonded to the C?O of an ester group and the other OH is free) and two‐bonded water (each OH of which is hydrogen‐bonded to one C?O) coexist in the copolymer and that two‐bonded water increases in relative population with increasing vinyl acetate composition. Dissolved water is entirely two‐bonded in poly(vinyl acetate), in which C?O groups are densely distributed in the matrix. We proved that dissolved water in polymers is hydrogen‐bonded through one or two OH groups to the possessed functional groups but does not cluster. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 777–785, 2005     

Synthesis of poly(D,L‐lactic acid‐alt‐glycolic acid) from D,L‐3‐methylglycolide

D ,L ‐3‐Methylglycolide (MG) was synthesized via two step reactions with a good yield (42%). It was successfully polymerized in bulk with stannous octoate as a catalyst at 110 °C. The effects of the polymerization time and catalyst concentration on the molecular weight and monomer conversion were studied. Poly(D ,L ‐lactic acid‐co‐glycolic acid) (D ,L ‐PLGA50; 50/50 mol/mol) copolymers were successfully synthesized from the homopolymerization of MG with high polymerization rates and high monomer conversions under moderate polymerization conditions. ¹H NMR spectroscopy indicated that the bulk ring‐opening polymerization of MG conformed to the coordination–insertion mechanism. ¹³C NMR spectra of D ,L ‐PLGA50 copolymers obtained under different experimental conditions revealed that the copolymers had alternating structures of lactyl and glycolyl. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4179–4184, 2000     

Self‐assembly of N‐carboxyethylchitosan near the isoelectric point

For the first time the possibility to obtain nanostructures by self‐assembly of chitosan polyampholytic derivative was demonstrated. The self‐assembly of N‐carboxyethylchitosan (CECh) took place only near its isoelectric point (pH 5.0–5.6). Out of the pH range 5.0–5.6, CECh aqueous solutions behaved as real solutions. Dynamic light scattering and atomic force microscopy analyses revealed that spherically shaped or rod/worm‐like nanosized assemblies were formed depending on the polymer molar mass, pH value, and polymer concentration. CECh of two different molar masses was studied in concentrations ranging from 0.01 to 0.1 mg/mL. The structures from CECh of weight‐average molar mass (M_w ) 4.5 × 10³ g/mol were spherical regardless the pH and polymer concentration. In contrast, CECh of high molar mass (HMMCECh, M_w = 6.7 × 10⁵ g/mol) formed self‐assemblies with spherical shape only at pH 5.0 and 5.6. At pH 5.2 spherical nanoparticles were obtained only at polymer concentration 0.01 mg/mL. The mean hydrodynamic diameter (D_h) of the obtained nanoparticles was in the range from 30 to 980 nm. On increasing the concentration, aggregation of the nanoparticles appeared, and at HMMCECh concentration 0.1 mg/mL, rod/worm‐like structures were obtained. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6712–6721, 2008