Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

Blue to light gray electrochromic polymers from dodecyl‐derivatized thiophene Bis‐substituted dibenzothiophene/dibenzofuran

3‐Dodecylthiophene end‐capped two monomers: 2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzothiophene (DBT‐3DTh) and 2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzofuran (DBF‐3DTh) were synthesized via Stille coupling reaction. Both monomers exhibited emission peaks at about 400 nm with fluorescence quantum yields ranging from 0.16 to 0.21. The corresponding electroactive polymers poly(2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzothiophene) (PDBT‐3DTh) and poly(2,8‐bis‐(4‐dodecyl‐thiophen‐2‐yl)‐dibenzofuran) (PDBF‐3DTh) were obtained by electropolymerization method and displayed good electrochemical stability. Both polymers switched between light gray in the neutral state and blue in the oxidized state. Kinetic investigations showed that PDBT‐3DTh exhibited a maximum optical contrast (ΔT %) of 25.23% at 575 nm with the coloration efficiency (CE) of 196 cm² C^?1. However, the electrochromic properties of PDBF‐3DTh were inferior to PDBT‐3DTh. Further detailed discussions with EDOT and 3‐alkylthiophenes end‐capped DBT/DBF hybrid electrochromic polymers were comparatively studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1468–1478     

Effect of conjugated core building block dibenzo[a,c]phenazine unit on π‐conjugated electrochromic polymers: Red‐shifted absorption

A comparative investigation was undertaken for the electrosynthesis and electrochemical properties of three different electroactive polymers having a conjugated core building block, dibenzo[a,c]phenazine. A series of monomers has been synthesized as regards to thiophene based units; thiophene, 3‐hexyl thiophene, and 3,4‐ethylenedioxythiophene. The effects of different donor substituents on the polymers' electrochemical properties were examined by cyclic voltammetry. Introducing highly electron‐donating (ethylene dioxy) group to the monomer enables solubility while also lowering the oxidation potential. The planarity of the monomer unit enhances π‐stacking and consequently lowering the E_g from 2.4 eV (PHTP) to 1.7 (PTBP). Cyclic voltammetry and spectroelectrochemical measurements revealed that 2,7‐bis(4‐hexylthiophen‐2‐yl)dibenzo[a,c]phenazine (HTP) and 2,7‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)dibenzo[a,c]phenazine (TBP) possessed electrochromic behavior. The colorimetry analysis revealed that while PTBP have a color change from red to blue, PHTP has yellow color at neutral state and blue color at oxidized state. Hence the presence of the phenazine derivative as the acceptor unit causes a red shift in the polymers' absorption to have a blue color. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1714–1720, 2010     

Multichromic benzimidazole‐containing polymers: Comparison of donor and acceptor unit effects

This study reports a comparative study on electrochromic properties of two donor–acceptor–donor (DAD)‐type polymers namely poly(2‐heptyl‐4,7‐di(thiophen‐2‐yl)‐1H‐benzo [d]imidazole) (BImTh) and poly(4,7‐bis(2,3‐dihydrothieno[3,4‐b] [1,4]dioxin‐5‐yl)‐2‐heptyl‐1H‐benzo[d]imidazole) (BImEd). DAD‐type monomers were polymerized electrochemically on indium tin oxide‐coated glass slides to determine the optical properties of the polymers. Electrochemical p‐doping experiments were performed to determine the band gap and absorption band values of the polymer films at different redox states. Polymerization of BImTh and BImEd yields multichromic polymers. Donor and acceptor effects are studied by comparing the PBImEd and PBImTh with corresponding benzotriazole derivatives. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Electrosynthesis of ambipolar electrochromic polymer films from anthraquinone–triarylamine hybrids

Two ester derivatives featuring anthraquinone as an interior core and terminal electroactive triphenylamine or carbazole groups were prepared by the condensation of 2,6‐dihydroxyanthraquinone with 4‐(diphenylamino)benzoyl chloride and 4‐(9H‐carbazol‐9‐yl)benzoyl chloride, respectively. The electrochemistry and electropolymerization of these monomers were investigated. The polymeric films were built onto ITO/glass surface by repetitive cyclic voltammetry scanning of the monomer solutions containing an electrolyte. The electrogenerated polymer films exhibited reversible electrochemical processes and strong color changes upon electro‐oxidation or electro‐reduction, which can be switched by potential modulation. The remarkable electrochromic behavior of the film was clearly interpreted on the basis of spectroelectrochemical studies, and the electrochromic stability was evaluated by the electrochromic switching studies. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 644–655     

A new donor‐acceptor type polymeric material from a thiophene derivative and its electrochromic properties

A new electrochromic polymer, poly(2,3,5,8‐tetra(thiophen‐2‐yl)quinoxaline) (PTTQ), was synthesized electrochemically and its electrochromic properties were investigated. The polymer was characterized by Cyclic Voltammetry, Fourier Transform infrared spectroscopy, UV‐Vis‐NIR Spectroscopy, and colorimetry. Spectroelectrochemistry analysis demonstrated that the polymer can undergo both p‐ and true n‐type doping processes. The polymer, (PTTQ), has three accessible color states: an oxidized transmissive, a neutral light bluish‐green, and a reduced transmissive light gray. Switching ability of the polymer was evaluated by kinetic studies. The polymer revealed an excellent optical contrast of 98% in the NIR region. Outstanding optical contrast in the NIR region, high stability and fast switching times make this polymer an excellent candidate for NIR device applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3723–3731, 2008     

Fused structures in the polymer backbone to investigate the photovoltaic and electrochromic properties of donor–acceptor‐type conjugated polymers

In this study, two new benzotriazole (BTz) and dithienothiophene (DTT) containing conjugated polymers were synthesized. After successful characterizations of the monomers by proton‐nuclear magnetic resonance (¹H NMR) and carbon‐NMR (¹³C NMR) techniques, poly(4‐(dithieno[3, 2‐b:2′,3′‐d]thiophen‐2‐yl)‐2‐(2‐octyldodecyl)‐2H‐benzo[d][1,2,3] triazole) P1 and poly(4‐(5‐(dithieno[3,2‐b:2′,3′‐d]thiophen‐2‐yl)thiophen‐2‐yl)‐2‐(2‐octyldodecyl)‐7‐(thiophen‐2‐yl)‐2H‐benzo[d][1,2,3]triazole) P2 were synthesized via a typical Stille coupling. Electrochemical and spectroelectrochemical studies showed that both polymers can be multipurpose materials and used in electrochromic and photovoltaic applications. Reported study indicated that incorporation of DTT into the structure leads to fast switching times compared with BTz‐based polymers and competent percentage transmittance in the near‐infrared region. Multichromism is important in the context of low‐cost flexible display device technology and both polymers are ambipolar and processable as well as multichromic. Throughout the preliminary photovoltaic studies, the best performances of photovoltaic devices were found as V_oc = 0.49 V, J_sc = 0.83 mA/cm², fill factor (FF) = 34.4%, and power conversion efficiency (PCE) = 0.14% for P1 , and as V_oc = 0.35 V, J_sc = 1.57 mA/cm², FF = 38.2%, and PCE = 0.21% for P2 . © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Pyrenylamine‐functionalized aromatic polyamides as efficient blue‐emitters and multicolored electrochromic materials

A series of novel aromatic polyamides with pyrenylamine in the backbone were prepared from a newly synthesized dicarboxylic acid monomer, N,N‐di(4‐carboxyphenyl)‐1‐aminopyrene, and various aromatic diamines via the phosphorylation polyamidation technique. These polyamides were readily soluble in many organic solvents and could be solution‐cast into tough and amorphous films. They had useful levels of thermal stability with glass‐transition temperatures in the range of 276–342 °C and 10% weight loss temperatures in excess of 500 °C. The dilute N‐methyl‐2‐pyrrolidone (NMP) solutions of these polymers exhibited fluorescence maxima around 455–540 nm with quantum yields up to 56.9%. The polyamides also showed remarkable solvatochromism of the emission spectra. Their films showed reversible electrochemical oxidation and reduction accompanied by strong color changes from colorless neutral state to purple oxidized state and to yellow reduced state. The polyamide 4g containing the pyrenylamine units in both diacid and diamine sides exhibited easily accessible p‐ and n‐doped states, together with multicolored electrochromic behaviors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New electroactive and electrochromic aromatic polyamides with ether‐linked bis(triphenylamine) units

A new class of electroactive polyamides with ether‐linked bis(triphenylamine) [O(TPA)₂] units were prepared through the direct phosphorylation polycondensation from N,N‐di(4‐aminophenyl)‐N′,N′‐diphenyl‐4,4′‐oxydianiline and aromatic dicarboxylic acids. These polyamides were amorphous with good solubility in many organic solvents, such as NMP and DMAc, and could be solution‐cast into strong and flexible polymer films. Their decomposition temperatures (T_d) at a 10% weight‐loss in nitrogen and air were recorded at 556–568 °C and 537–555 °C, respectively. The glass‐transition temperatures (T_g) of all the polyamides were observed in the range of 218?253 °C by DSC. Cyclic voltammograms of the polyamide films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at 0.80–0.82 V and 0.96–0.98 V versus Ag/AgCl in an electrolyte containing acetonitrile solution. The polyamide films showed excellent electrochemical and electrochromic stability, with a color change from a colorless or pale yellowish neutral form to green and purple oxidized forms at applied potentials ranging from 0 to 1.2 V. These polymers can also be used to fabricate electrochromic devices, and they showed high coloration efficiency, high redox stability, and fast response time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 496–510     

Synthesis,characterizations, and electrochromic properties of donor–acceptor type polymers containing 2, 1, 3‐benzothiadiazole and different thiophene donors

Three donor–acceptor type π‐conjugated monomers containing 2, 1, 3‐benzothiadiazole (Tz) as the acceptor unit and different thiophene derivatives (thiophene, 3,4‐ethylenedioxythiophene, and thieno[3,2‐b]thiophene) as the donor units have been synthesized via Stille coupling reaction. The corresponding polymers are electrochemically deposited onto FTO glass by cyclic voltammetry (CV). The maximum absorption wavelength of the neutral polymers varies with the electron‐rich character of incorporated thiophene moieties, giving rise to tunable colors. In addition, the prepared polymer films demonstrate reasonable transmittance modulation, fast switching rate, high color efficiency and good stability, which meet the requirements of smart windows and electrochromic display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2239–2246     

Silafluorene‐based polymers for electrochromic and polymer solar cell applications

In this study, four novel silafluorene (SiF) and benzotriazole (Btz) bearing conjugated polymers are synthesized. In the context of electrochemical and optical studies, these polymers are promising materials both for electrochromic device (ECD) and polymer solar cell (PSC) applications. All of the polymers are ambipolar (both p‐ and n‐dopable) and multichromic. Electrochemistry experiments indicate that incorporation of selenophene instead of thiophene unit increases the HOMO energy level of the polymers. Power conversion efficiency of the PSCs reached 1.75% for PTBTSiF, 1.55% for PSBSSiF, 2.57% for PBTBTSiF, and 1.82% for PBSBSSiF. The hole mobilities of the polymers are estimated through space charge limited current (SCLC) model. PBTBTSiF has the highest hole mobility as 2.44 × 10^?3 cm² V s^?1. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1541–1547     

Substituent and heteroatom effects on the electrochromic properties of similar systems

Electrochromic polymers called poly(3,4‐dihydro‐3,3‐bis ((naphthalen‐1‐yl)methyl)‐2H‐thieno[3,4‐b][1,4]dioxepine) (PProDOT‐Np₂), poly(3,3‐dibenzyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxepine), and poly(3,3‐dibenzyl‐3,4‐dihydro‐2H‐thieno[3,4‐b][1,4]dioxepine) were synthesized electrochemically and the effect of substituents and heteroatoms on the electrochromic properties were investigated for the similar systems. All polymers show electrochromism from a colored state when neutralized to transmissive when oxidized. Although, increasing bulky size (PProDOT‐Np₂) causes lower coloration efficiency (CE) as well as lower optical contrast, the replacement of S atom by Se atom resulted in a lower band gap polymer with a higher CE than its thiophene analog. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Improved Electrochromic Performance of Poly(3,4‐ethylenedioxythiophene) by Incorporating a Three‐Dimensionally Ordered Macroporous Structure

In this paper, three‐dimensionally ordered macroporous (3DOM) poly(3,4‐ethylenedioxythiophene) (PEDOT) films were electropolymerized from an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim]PF₆). The electrochromic performances of the 3DOM PEDOT films were studied. The 3DOM films exhibited high transmittance modulation (41.2 % at λ=580 nm), high ionic fast switching speeds (0.7 and 0.7 s for coloration and bleaching, respectively), and enhanced cycling stability relative to that exhibited by the dense PEDOT film. The relationship between the declining behavior of the transmittance modulation and the nanostructure of the film was investigated. A three‐period decay process was proposed to understand the declining behavior. The 3D interconnected macroporous nanostructure is beneficial for fast ion and electron transportation, high ion accessibility, and maintenance of structure integrity, which result in enhanced cycling stability and fast switching speeds.     

Structure and morphology control in thin films of regioregular poly(3‐hexylthiophene)

This review focuses on the structural control in thin films of regioregular poly(3‐hexylthiophene) (P3HT), a workhorse among conjugated semiconducting polymers. It highlights the correlation existing between processing conditions and the resulting structures formed in thin films and in solution. Particular emphasis is put on the control of nucleation, crystallinity and orientation. P3HT can generate a large palette of morphologies in thin films including crystalline nanofibrils, spherulites, interconnected semicrystalline morphologies and nanostructured fibers, depending on the elaboration method and on the macromolecular parameters of the polymer. Effective means developed in the recent literature to control orientation of crystalline domains in thin films, especially by using epitaxial crystallization and controlled nucleation conditions are emphasized. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1218–1233, 2011     

Energy‐level alignment at metal–organic and organic–organic interfaces

This article reports on the electronic structure at interfaces found in organic semiconductor devices. The studied organic materials are C₆₀ and poly (para‐phenylenevinylene) (PPV)‐like oligomers, and the metals are polycrystalline Au and Ag. To measure the energy levels at these interfaces, ultraviolet photoelectron spectroscopy has been used. It is shown how the energy levels at interfaces deviate from the bulk. Furthermore, it is demonstrated that the vacuum levels do not align at the studied interfaces. The misalignment is caused by an electric field at the interface. Several effects are presented that influence the energy alignment at interfaces, such as screening effects, dipole layer formation, charge transfer, and chemical interaction. The combination of interfaces investigated here is similar to interfaces found in polymer light‐emitting diodes and organic bulk heterojunction photovoltaic devices. The result, the misalignment of the vacuum levels, is expected to influence charge‐transfer processes across these interfaces, possibly affecting the electrical characteristics of organic semiconductor devices that contain similar interfaces. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2549–2560, 2003     

Synthesis of novel dithienothiophene‐ and 2,7‐carbazole‐based conjugated polymers and H‐bonded effects on electrochromic and photovoltaic properties

Three kinds of dithienothiophene/carbazole‐based conjugated polymers ( P1–P3 ), which bear acid‐protected and benzoic acid pendants in P2 and P3 , respectively, were synthesized via Suzuki coupling reaction. Interestingly, P1 – P3 exhibited reversible electrochromism during the oxidation processes of cyclic voltammogram studies, and P3 (with H‐bonds) revealed the best electrochromic property with the most noticeable color change. According to powder X‐ray diffraction (XRD) analysis, these polymers exhibited obvious diffraction features indicating bilayered packings between polymer backbones and π‐π stacking between layers in the solid state. Compared with the XRD data of P2 (without H‐bands), H‐bonds of P3 induced a higher crystallinity in the small‐angle region (corresponding to a higher ordered bilayered packings between polymer backbones), but with a similar crystallinity in the wide angle region indicating a comparable π‐π stacking distance between layers. Moreover, based on the preliminary photovoltaic properties of PSC devices ( P1 – P3 blended individually with PCBM acceptor in the weight ratio of 1:1), P3 (with H‐bonds) possessed the highest power conversion efficiency of 0.61% (with J_sc = 2.26 mA/cm², FF = 29.8%, and V_oc = 0.9 V). In contrast to P2 (without H‐bands), the thermal stability, crystallinity, and electrochromic along with photovoltaic properties of P3 were generally enhanced due to its H‐bonded effects. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fluorene‐Based Co‐polymer with High Hole Mobility and Device Performance in Bulk Heterojunction Organic Solar Cells

A new donor–acceptor polymer based on 9,9‐dioctylfluorene is synthesized and tested in organic photovoltaic devices. Results show that the polymer exhibits good solubility in a range of organic solvents and has a high hole mobility. When blended with a PC₇₀BM acceptor and fabricated into a bulk heterojunction, photovoltaic devices having a maximum power conversion efficiency (PCE) of 6.2% and a peak external quantum efficiency of 74% are created. Such efficiencies are realized without any necessity for solvent additives or thermal annealing protocols.

     

Electrochromic material containing unsymmetrical substituted N,N,N′,N′‐tetraaryl‐1,4‐phenylenediamine: Synthesis and their optical,electrochemical, and electrochromic properties

A novel dibromo compound containing unsymmetrical substituted bi‐triarylamine was synthesized. A conjugated polymer was prepared via the Suzuki coupling from the newly prepared dibromo compound and 9,9‐dioctylfluorene‐2,7‐bis(trimethyleneboronate). The glass transition temperature (T_g) of the conjugated polymer was 140 °C, 10% weight‐loss temperatures (T_d10) in nitrogen was 458 °C, and char yield at 800 °C in nitrogen higher than 64%. Cyclic voltammogram of the polymer film cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at 0.70 and 1.10 V versus Ag/Ag⁺ in acetonitrile solution. The polymer films revealed excellent stability of electrochromic characteristics, with a color change from yellow green of the neutral form to the dark green and blue of oxidized forms at applied potentials ranging from 0 to 1.3 V. The color switching time and bleaching time were 4.25 and 7.22 s for 860 nm and 5.51 s and 6.48 s for 560 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1469–1476, 2010