Synthesis of poly(p‐phenylene vinylene)‐ and poly(phenylene ethynylene)‐based polymers containing p‐terphenyl in the main chain with alkoxyphenyl side groups

Starting from the pyrylium salt and following a facile synthetic route, we synthesized and polymerized 4,4″‐diiodo‐2′,6′‐di[4‐(2′‐ethylhexyl)oxy]phenyl‐p‐terphenyl with p‐divinylbenzene or p‐diethynylbenzene. The resulting polymers had moderate molecular weights, were amorphous, and dissolved in tetrahydrofuran and chloroform, with glass‐transition temperatures of 120–131 °C. The polymers behaved as violet‐blue‐emitting materials with photoluminescence maxima around 420 and 450 nm in solution and in thin films, respectively. They possessed well‐defined chromophores resulting from steric interactions in the polymer chain. The photoluminescence quantum yields were up to 0.29. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2591–2600, 2002     

Synthesis,structure, and optical properties of an alternating calix[4]arene‐based meta‐linked phenylene ethynylene copolymer

Novel alternating copolymers comprising bis‐ calix[4]arene‐p‐phenylene ethynylene and m‐phenylene ethynylene units ( CALIX‐m‐PPE ) were synthesized using the Sonogashira‐Hagihara cross‐coupling polymerization. Good isolated yields (60–80%) were achieved for the polymers that show M_n ranging from 1.4 × 10⁴ to 5.1 × 10⁴ gmol^?1 (gel permeation chromatography analysis), depending on specific polymerization conditions. The structural analysis of CALIX‐m‐PPE was performed by ¹H, ¹³C, ¹³C–¹H heteronuclear single quantum correlation (HSQC), ¹³C–¹H heteronuclear multiple bond correlation (HMBC), correlation spectroscopy (COSY), and nuclear overhauser effect spectroscopy (NOESY) in addition to Fourier transform‐Infrared spectroscopy and microanalysis allowing its full characterization. Depending on the reaction setup, variable amounts (16–45%) of diyne units were found in polymers although their photophysical properties are essentially the same. It is demonstrated that CALIX‐m‐PPE does not form ground‐ or excited‐state interchain interactions owing to the highly crowded environment of the main‐chain imparted by both calix[4]arene side units which behave as insulators inhibiting main‐chain π–π staking. It was also found that the luminescent properties of CALIX‐m‐PPE are markedly different from those of an all‐p‐linked phenylene ethynylene copolymer ( CALIX‐p‐PPE ) previously reported. The unexpected appearance of a low‐energy emission band at 426 nm, in addition to the locally excited‐state emission (365 nm), together with a quite low fluorescence quantum yield (? = 0.02) and a double‐exponential decay dynamics led to the formulation of an intramolecular exciplex as the new emissive species. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Poly(phenylene ethynylene)s with alkoxyphenyl substituents

Two new poly(phenylene ethynylene)s with alkoxyphenyl substituents were synthesized and characterized. The polymers were amorphous, dissolved readily in common organic solvents, and showed glass‐transition temperatures at 162–175 °C. They showed blue photoluminescence both in solution and in the solid state due to the steric interaction between the substituents and the main chain that caused an interruption of the conjugation length. The quantum yields in a tetrahydrofuran solution were up to 0.63. Excimer emission was the dominant product of the photoexcitation of thin films of the polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1449–1455, 2002     

Water‐soluble poly(ethylene oxide)‐block‐poly(p‐phenylene vinylene) copolymer: Synthesis and characterization

Water‐soluble and photoluminescent block copolymers [poly(ethylene oxide)‐block‐poly(p‐phenylene vinylene) (PEO‐b‐PPV)] were synthesized, in two steps, by the addition of α‐halo‐α′‐alkylsulfinyl‐p‐xylene from activated poly(ethylene oxide) (PEO) chains in tetrahydrofuran at 25 °C. This copolymerization, which was derived from the Vanderzande poly(p‐phenylene vinylene) (PPV) synthesis, led to partly converted PEO‐b‐PPV block copolymers mixed with unreacted PEO chains. The yield, length, and composition of these added sequences depended on the experimental conditions, namely, the order of reagent addition, the nature of the monomers, and the addition of an extra base. The addition of lithium tert‐butoxide increased the length of the PPV precursor sequence and reduced spontaneous conversion. The conversion into PPV could be achieved in a second step by a thermal treatment. A spectral analysis of the reactive medium and the composition of the resulting polymers revealed new evidence for an anionic mechanism of the copolymerization process under our experimental conditions. Moreover, the photoluminescence yields were strongly dependant on the conjugation length and on the solvent, with a maximum (70%) in tetrahydrofuran and a minimum (<1%) in water. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4337–4350, 2005     

Synthesis and Characterization of Cross‐Linked Poly(p‐phenylene ethynylene)s

Summary: Conjugated poly(p‐phenylene ethynylene) networks with interesting optoelectronic properties were synthesized by the palladium‐catalyzed polycondensation of 2,5‐diiodo‐4‐[(2‐ethylhexyl)oxy]methoxybenzene, and 1,4‐diethynyl‐2,5‐bis‐(octyloxy)benzene, with 1,2,4‐tribromobenzene as cross‐linker. The cross‐linker concentration was varied and materials with different cross‐link densities were prepared. The materials were processed into films by simultaneous polymerization and shaping. An alternative approach is to synthesize these cross‐linked polymers in the form of spherical particles, which can be processed from dispersions.

Schematic representation of the cross‐linking process.     

Poly(p‐phenylene ethynylene) Incorporating Sterically Enshrouding m‐Terphenyl Oxacyclophane Canopies

A sterically encumbered m‐terphenyl oxacyclophane substituted with two aryl iodide substituents has been prepared as a versatile monomer for the preparation of π‐conjugated polymers. The monomer has been used to prepare a poly(p‐phenylene ethynylene) derivative (P1) incorporating oxacyclophane units as canopies that shield one side of the π‐system from inter‐chain interactions. The photophysical properties of P1 in dilute solution compare well to those of a poly(p‐phenylene ethynylene) derivative (P2) that lacks the canopy. The presence of the steric canopy leads to a diminished inter‐chain interaction in the solid state and enhances the kinetic response of P1 to vapors of nitro‐organics such as TNT, presumably by increasing the permeability of P1 to these analytes over that of P2.

     

Poly(ortho‐phenylene ethynylene)s: Synthetic accessibility and optical properties

Poly(ortho‐phenylene ethynylene)s (PoPEs) have been synthesized via an in situ activation/coupling AB′ polycondensation protocol. The resulting polymers have been characterized by several analytical methods and are shown to have no structural defects. Although the Sonogashira–Hagihara polycondensation reaction is less efficient than for the preparation of the corresponding meta‐ and para‐linked polymers, presumably because of steric hindrance caused by the ortho substituents, the process can be accelerated by the use of microwave irradiation. Optical spectroscopy indicates solvent‐dependent conformational changes between extended transoid and helical cisoid conformations, providing the first experimental evidence for solvophobically driven folding of the PoPE backbone. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1619–1627, 2006     

Synthesis of linear and V-shaped oligo(phenylene ethynylene) derivatives: geometric effects on photophysical properties

<正>A series of linear and V-shaped oligo(phenylene ethynylene) derivatives 1-3 were synthesized through sequent Sonogashira coupling and propargyl alcohol deprotection reaction in high yields.The alkoxy chains(i.e.,n-hexyloxy groups) were introduced to assure good solubility of compounds 1-3 in common solvents.The photophysical properties of 1-3 in solution depend strongly on the geometries of these compounds.     

Meta‐linked and para‐linked water‐soluble poly(arylene ethynylene)s with amino acid side chains: Effects of different linkage on Hg2+ ion sensing properties in aqueous media

Water‐soluble, meta‐ and para‐linked poly(arylene ethynylene)s containing L ‐aspartic acid‐functionalized fluorene units (P1 and P2) and their model compounds (M1 and M2) have been synthesized, and their photophysical properties and fluorescent sensing properties were investigated in aqueous solution. P1 and M1 with the meta‐linkage show blue‐shifted absorption and emission spectra, and decreased photoluminescence quantum yields compared with those of P2 and M2 with para‐linkage. Their absorption and fluorescence spectra are pH dependent perhaps due to the aggregation of the polymer chains at low pH values. In buffer solutions, both polymers and their model compounds exhibit the excellent selectivity and sensitivity to Hg²⁺ over other common metal ions. Furthermore, the quenching constant and detection limit of P1 are determined to be 1.04 × 10⁷ M^?1 and 10 nM, and show the higher sensitivity compared to P2. Further comparison of their model compounds reveal that the sensitivity and quenching efficiency of M1 is also higher than that of M2, indicating that the meta‐linkage pattern plays a key role in improving their Hg²⁺ ion sensing properties. In addition, both meta‐ and para‐linked polymers exhibit the higher quenching efficiency than their model compounds due to the amplified fluorescence response of conjugated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

沉淀剂对含有氨侧基的聚苯撑乙炔发光性能的影响

通过单体4-[(2,5-二溴苯)乙炔基]苯胺和1,4-二乙炔基-2,5-二戊氧基苯之间的Sonogashira偶合反应合成了带有p-氨基苯乙炔基共轭侧基的聚对苯撑乙炔（(PAnPE）). 该共轭聚合物的THF溶液（(2××10-－5 mol&#8226;·L-－1）)在473和519 nm处呈现两个比较强的荧光发射峰. 通过调节在聚合物PAnPE-THF溶液中所加入三种沉淀剂（(甲醇、乙酸、稀盐酸溶液）)的体积比例, 来改变PAnPE分子链的聚集态结构, 进而研究对其发光性能的影响规律. 实验结果表明: 由于沉淀剂与聚合物PAnPE分子链之间相互作用能力与方式的不同, PAnPE两个荧光峰的发射强度因聚合物分子链聚集结构不同而呈现不同的变化规律, 这有助于实现在化学传感器中的应用.     

Synthesis of soluble poly(para‐phenylene) with a long polymer chain: Characteristics of regioregular poly(1,4‐phenylene)

Soluble poly(para‐phenylene) having a long polymer chain (more than six repeat units) was synthesized with a tert‐butyl end‐group (t‐PPP) and was found to have improved solubility and excellent optical properties. Poly(1,3‐cyclohexadiene) (PCHD) consisting of only 1,4‐cyclohexadiene (1,4‐CHD) units was synthesized with a tert‐butyl end‐group (t‐PCHD), and completely dehydrogenated to obtain t‐PPP. This end‐group effectively prevented the crystallization of t‐PPP, and polymers containing up to 16 repeat units were soluble in tetrahydrofuran. Soluble t‐PPP obtained had an ability to form a tough thin film prepared by spin‐coating method. Optical analyses of t‐PPP provided strong evidence for a linear polymer chain structure. A block copolymer of t‐PPP and a soluble polyphenylene (PPH) was then synthesized, and the excellent optical properties were retained by this block copolymer along with its solubility. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5223–5231, 2008     

Synthesis,characterization, and structure–property investigation of conformationally rigid regioisomers of poly(p‐phenylene ethynylene)s

A series of rigid poly(p‐phenylene ethynylene)s ( PPE1 – PPE4 ) with biphenyl‐ ( M1–M3 ) and phenyl‐ ( M4 ) side groups is prepared from appropriately functionalized monomers. Herein, the solution and solid state absorption studies show the polymers have adopted twisted and rigid conformations, as supported by deep HOMO energy levels (?5.76 to ?5.81 eV). The absorption maxima of PPE1–PPE3 are shifted to shorter wavelength (λ_max = 375–381 nm) as compared to linear poly(p‐phenylene ethynylene)s (446 nm), implying a nonplanar conformation. The self‐assembly of polymers into fibers is examined using scanning electron microscopy. The fibers are not observed in PPE4 with short phenyl side group, suggesting the important role of the interplay between rigidity, position, and size of the side chains toward the formation of fibers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3652–3662     

Melt‐processable blends of ionic poly(p‐phenylene terephthalamide) and poly(4‐vinylpyridine): Relaxation behavior

Melt‐processable blends were prepared from rigid molecules of an ionically modified poly(p‐phenylene terephthalamide) (PPTA) and flexible‐coil molecules of poly(4‐vinylpyridine) (PVP). Dynamic mechanical analyses of blends with 50% or more of the ionic PPTA component revealed the presence of two distinct phases. The glass‐transition temperature of the more stable, ionic PPTA‐rich phase increased linearly with the ionic PPTA content. The second phase present in these blends was an ionic PPTA‐poor, or a PVP‐rich, phase. For this phase, a reasonably good fit of the data, showing the glass‐transition temperature as a function of the ionic PPTA content, was achieved between the results of this study and the reported results of previous investigation of molecular composites of the same two components with ionic PPTA contents of 15 wt % or less. The possible influence of annealing on the blend structure of a 90/10 blend of ionic PPTA and PVP was examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1468–1475, 2003     

RAFT synthesis of a water‐soluble triblock copolymer of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) using a macromolecular chain transfer agent in aqueous solution

Triblock copolymers of poly(styrenesulfonate)‐b‐poly(ethylene glycol)‐b‐poly(styrenesulfonate) with narrow molecular weight distribution (M_w/M_n = 1.28–1.40) and well‐defined structure have been synthesized in aqueous solution at 70 °C via reversible addition‐fragmentation chain transfer polymerization. Poly(ethylene glycol) (PEG) capped with 4‐cyanopentanoic acid dithiobenzoate end groups was used as the macro chain transfer agent (PEG macro‐CTA) for sole monomer sodium 4‐styrenesulfonate. The reaction was controllable and displayed living polymerization characteristics and the triblock copolymer had designed molecular weight. The reaction rate depended strongly on the CTA and initiator concentration ratio [CTA]₀/[ACPA]₀: an increase in [CTA]₀/[ACPA]₀ from 1.0 to 5.0 slowed down the polymerization rate and improved the molecular weight distribution with a prolonged induction time. The polymerization proceeded, following first‐order kinetics when [CTA]₀/[ACPA]₀ = 2.5 and 5.0. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3698–3706, 2007     

Thermal characterization and solid‐state 13C‐NMR investigation of blends of poly(N‐phenyl‐2‐hydroxytrimethylene amine) and poly(N‐vinyl pyrrolidone)

The miscibility and thermal properties of poly(N‐phenyl‐2‐hydroxytrimethylene amine)/poly(N‐vinyl pyrrolidone) (PHA/PVP) blends were examined by using differential scanning calorimetry (DSC), high‐resolution solid‐state nuclear magnetic resonance (NMR) techniques, and thermogravimetric analysis (TGA). It was found that PHA is miscible with PVP, as shown by the existence of a single composition‐dependent glass transition temperature (T_g) in the whole composition range. The DSC results, together with the ¹³C crosspolarization (CP)/magic angle spinning (MAS)/high‐power dipolar decoupling (DD) spectra of the blends, revealed that there exist rather strong intermolecular interactions between PHA and PVP. The increase in hydrogen bonding and in T_g of the blends was found to broaden the line width of CH—OH carbon resonance of PHA. The measurement of the relaxation time showed that the PHA/PVP blends are homogeneous at least on the scale of 1–2 nm. The proton spin‐lattice relaxation in both the laboratory frame and the rotating frame were studied as a function of the blend composition, and it was found that blending did not appreciably affect the spectral densities of motion (sub‐T_g relaxation) in the mid‐MHz and mid‐KHz frequency ranges. Thermogravimetric analysis showed that PHA has rather good thermal stability, and the thermal stability of the blend can be further improved with increasing PVP content. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 237–245, 1999     

Self-assembled structures with liquid-crystalline order in aqueous solution by patterning poly(phenylene ethynylene)s

Facially amphiphilic (FA) phenylene ethynylene (PE) polymers that self-assemble in aqueous solution were studied by small-angle X-ray diffraction (SAXD) and found to self-assemble into bilayers with a fully extended backbone. The resulting bilayers have long-range liquid-crystalline order. This self-assembly is programmed into the molecule by placing polar and nonpolar groups at precise locations so that they segregate onto opposite sides of the molecular structure. The absence of FA patterning generated an amorphous sample confirming the importance of this programmed amphiphilicity in the self-assembly process. Facially amphiphilic patterning represents a new design criterion for supramolecular chemistry, illustrated here in the observation of molecular ordering into bilayers reminiscent of self-assembled structures commonly found in biology, including amphiphilic beta-sheet polypeptides and phospholipid bilayers.     

Synthesis and comparison of the structure–property relationships of symmetric and asymmetric water‐soluble poly(p‐phenylene)s

Sodium salts of water‐soluble polymers poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(hexyloxy)‐1,4‐phenylene]} ( P1 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dodecyloxy)‐1,4‐phenylene]} ( P2 ), poly{[2,5‐bis(3‐sulfonatopropoxy)‐1,4‐phenylene]‐alt‐[2,5‐bis(dibenzyloxy)‐1,4‐phenylene]} ( P3 ), poly[2‐hexyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P4 ), and poly[2‐dodecyloxy‐5‐(3‐sulfonatopropoxy)‐1,4‐phenylene] ( P5 )] were synthesized with Suzuki coupling reactions and fully characterized. The first group of polymers ( P1 – P3 ) with symmetric structures gave lower absorption maxima [maximum absorption wavelength (λ_max) = 296–305 nm] and emission maxima [maximum emission wavelength (λ_em) = 361–398 nm] than asymmetric polymers P4 (λ_max = 329 nm, λ_em = 399 nm) and P5 (λ_max = 335 nm, λ_em = 401 nm). The aggregation properties of polymers P1 – P5 in different solvent mixtures were investigated, and their influence on the optical properties was examined in detail. Dynamic light scattering studies of the aggregation behavior of polymer P1 in solvents indicated the presence of aggregated species of various sizes ranging from 80 to 800 nm. The presence of alkoxy groups and 3‐sulfonatopropoxy groups on adjacent phenylene rings along the polymer backbone of the first set hindered the optimization of nonpolar interactions. The alkyl chain crystallization on one side of the polymer chain and the polar interactions on the other side allowed the polymers ( P4 and P5 ) to form a lamellar structure in the polymer lattice. Significant quenching of the polymer fluorescence upon the addition of positively charged viologen derivatives or cytochrome‐C was also observed. The quenching effect on the polymer fluorescence confirmed that the newly synthesized polymers could be used in the fabrication of biological and chemical sensors. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3763–3777, 2006     

Para‐linked and meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s: Conformational changes and their effects on iron–sulfur protein detection

Four para‐linked or meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s (PAEs) were synthesized to investigate the solvent‐induced π‐stacked self‐assembly. These PAE backbones are composed of fluorenylene and phenylene units, which are alternatively linked by ethynylene bonds. UV–vis absorption and photoluminescence spectra were used to study their conformational changes as solvent was gradually changed from MeOH to H₂O. In pure water, with gradually increased meta‐phenylene content (0, 50, and 100%), they underwent a gradual transition process of conformation from disordered aggregate structure to helix structure, which was not compactly folded. Moreover, the polymer with an ammonium‐functionalized side chain on the meta‐phenylene unit appeared to adopt a more incompact or extended helix conformation than the corresponding one without this side chain. Furthermore, the conformational changes of these cationic PAEs in H₂O were used to study their effects on biological detection. Rubredoxin (Rd), a type of anionic iron–sulfur‐based electron transfer protein, was chosen to act as biological analyte in the fluorescence quenching experiments of these polymers. Preliminary results suggest that they all exhibit amplified fluorescence quenching, and that the polymer with more features of helix conformation tends to be quenched by Rd more efficiently. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5424–5437, 2006     

End‐group modification of poly(2,6‐dimethyl‐1,4‐phenylene ether) and in situ synthesis of poly(2,6‐dimethyl‐1,4‐phenylene ether)‐b‐poly(ethylene terephthalate) block copolymer

The preparation of poly(2,6‐dimethyl‐1,4‐phenylene ether)‐b‐poly(ethylene terephthalate) block copolymer was performed by the reaction of the 2‐hydroxyethyl modified poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE‐EtOH) with poly(ethylene terephthalate) (PET) by an in situ process, during the synthesis of the polyester. The yield of the reaction of the 2‐hydroxyethyl functionalized PPE‐EtOH with PET was close to 100%. A significant proportion of the PET‐b‐PPE‐EtOH block copolymer was found to have short PET block. Nevertheless, the copolymer structured in the shape of micelles (20 nm diameter) and very small domains with 50–200 nm diameter, whereas unmodified PPE formed much larger domains (1.5 μm) containing copolymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3985–3991, 2008     

A novel type of optically active helical liquid crystalline polymers: Synthesis and characterization of poly(p‐phenylene)s containing terphenyl mesogen with different terminal groups

Series of poly(p‐phenylene)s (PPPs) containing terphenyl mesogenic pendants with cyano and methoxy terminal groups by flexible ? COO(CH₂)₆O? bridge [ P(CN) and P(OCH₃) ] are synthesized through Yamamoto polycondensation with Ni‐based complex catalysts. The effects of the structural variation on their properties, especially their mesomorphism, ultraviolet–visible (UV), and photoluminescence behaviors, are studied. All of the polymers are stable, losing little of their weights when heated to ≥340 °C. The polymers show good solubility and can be dissolved in common solvents. P(CN) with cyano terminal group shows enantiotropic SmA_d phase with bilayer packing arrangement, while P(OCH₃) with methoxy terminal group readily forms nematic and SmA_d phase when heated and cooled. Photoexcitation of their solutions induces strong blue light emission. Compared with P(OCH₃) , the light‐emitting bands of polymer P(CN) is slightly redshifted to 428 nm and the emission intensity of P(CN) is much stronger, due to the existence of donor–acceptor pairs. More interestingly, both of the polymers exhibit obvious Cotton effect on the CD spectra, resulting from the predominant screw sense of the backbone. This indicates that the bulky mesogenic pendant orientating around the backbone will force the main chain with helical conformation in the long region due to steric crowdedness. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4723–4735, 2009