Self‐assembly and morphology of polydimethylsiloxane supramolecular thermoplastic elastomers

Functionalization of polydimethylsiloxanes (PDMS) polymers with hydrogen‐bonding ureidopyrimidinone (UPy) groups leads to supramolecular thermoplastic elastomers. In previous studies, no lateral stacking of UPy dimers was observed in UPy‐functionalized polymers, unless additional urethane or urea groups were built into the hard block. However, we have shown that when PDMS is used as the soft block, this lateral aggregation of UPy dimers does take place, since long fibers could be observed in the atomic force microscopy (AFM) phase image. Also in bulk, the presence of these interactions was proven by oscillatory shear experiments. We attribute this aggregation to the incompatibility of soft block and hard block, leading to phase separation. Moreover, we have shown that additional urethane or urea groups in the hard block do lead to materials with more fibers and higher melting points. For the UPy‐urea functionalized PDMS even single fibers are observed with AFM when dropcasted from a very diluted solution. When the length of the soft block is increased, the morphology changes from fibrous to spherical. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3877–3885, 2008     

Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Main‐chain,thermotropic, liquid‐crystalline,hydrogen‐bonded polymers of 4,4′‐bipyridyl with aliphatic dicarboxylic acids

A series of main‐chain, thermotropic, liquid‐crystalline (LC), hydrogen‐bonded polymers or self‐assembled structures based on 4,4′‐bipyridyl as a hydrogen‐bond acceptor and aliphatic dicarboxylic acids, such as adipic and sebacic acids, as hydrogen‐bond donors were prepared by a slow evaporation technique from a pyridine solution and were characterized for their thermotropic, LC properties with a number of experimental techniques. The homopolymer of 4,4′‐bipyridyl with adipic acid exhibited high‐order and low‐order smectic phases, and that with sebacic acid exhibited only a high‐order smectic phase. Like the homopolymer with adipic acid, the two copolymers of 4,4′‐bipyridyl with adipic and sebacic acids (75/25 and 25/75) also exhibited two types of smectic phases. In contrast, the copolymer of 4,4′‐bipyridyl with adipic and sebacic acids (50/50), like the homopolymer with sebacic acid, exhibited only one high‐order smectic phase. Each of them, including the copolymers, had a broad temperature range of LC phases (36–51 °C). The effect of copolymerization for these hydrogen‐bonded polymers on the thermotropic properties was examined. Generally, copolymerization increased the temperature range of LC phases for these polymers, as expected, with a larger decrease in the crystal‐to‐LC transition than in the LC‐to‐isotropic transition. Additionally, it neither suppressed the formation of smectic phases nor promoted the formation of a nematic phase in these hydrogen‐bonded polymers, as usually observed in many thermotropic LC polymers. The thermal transitions for all of them, measured by differential scanning calorimetry, were well below their decomposition temperatures, as measured by thermogravimetric analysis, which were in the temperature range of 193–210 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1282–1295, 2003     

Morphology of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) assemblies in diluted aqueous solution and gel studied by atomic force microscopy

Morphologies of poly(ε‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ε‐caprolactone) (PCL‐PEG‐PCL) triblock copolymer self‐assemblies in the diluted solution and in gel were studied by atomic force microscopy (AFM). The copolymer self‐assembled into wormlike aggregates, of uniform diameter, in water. The wormlike aggregates arranged in order to form separate clusters in the diluted copolymer solution; at a higher copolymer concentration, the clusters became bigger and bigger, and packed together to form gel. Copyright © 2008 John Wiley & Sons, Ltd.     

Poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(ϵ‐caprolactone) triblock copolymers: Synthesis and self‐assembly in aqueous solutions

Nontoxic and biodegradable poly(?‐caprolactone)‐b‐poly(ethylene glycol)‐b‐poly(?‐caprolactone) triblock copolymers were synthesized by the solution polymerization of ?‐caprolactone in the presence of poly(ethylene glycol). The chemical structure of the resulting triblock copolymer was characterized with ¹H NMR and gel permeation chromatography. In aqueous solutions of the triblock copolymers, the micellization and sol–gel‐transition behaviors were investigated. The experimental results showed that the unimer‐to‐micelle transition did occur. In a sol–gel‐transition phase diagram obtained by the vial‐tilting method, the boundary curve shifted to the left, and the gel regions expanded with the increasing molecular weight of the poly(?‐caprolactone) block. In addition, the hydrodynamic diameters of the micelles were almost independent of the investigated temperature (25–55 °C). The atomic force microscopy results showed that spherical micelles formed at the copolymer concentration of 2.5 × 10^?4 g/mL, whereas necklace‐like and worm‐like shapes were adopted when the concentration was 0.25 g/mL, which was high enough to form a gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 605–613, 2007     

Side‐chain supramolecular polymers with induced supramolecular chirality through H‐bonding interactions

Side‐chain supramolecular polymers that show columnar mesomorphism have been prepared through H‐bonding interactions between a polyvinylpyridine polymer as H‐acceptor and different H‐donors derived from benzoic acid. These compounds have been designed according to a promesogenic structure, that is, either disk‐like or banana‐like, to promote stacking and therefore the formation of columnar arrangements. IR studies confirmed the formation of H‐bonds and demonstrated that the H‐bond intensity decreases upon increasing temperature. The mesophase organizations were studied by polarized optical microscopy, differential scanning calorimetry, and X‐ray diffraction. Associations containing poly‐3‐methyl‐4‐vinylpyridine showed supramolecular optical activity, as evidenced by circular dichroism studies on thin films. It is proposed that these supramolecular polymers adopt a helical structure that can be biased toward a given handedness by virtue of the configuration of the stereogenic centers in the peripheral tails of the acids. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5528–5541, 2008     

Synthesis of achiral PEG‐PANI rod‐coil block copolymers and their helical superstructures

Poly(ethylene glycol) (PEG) was modified with aniline groups at both the end, and then PEG‐PANI rod‐coil block polymers have been synthesized by polymerization of the aniline with the aniline‐modified PEG. FTIR, NMR, and elemental analysis provided the chemical strucutre of the as‐prepared polymers. The achiral rod‐coil copolymer could form different superstructures by means of self‐assembly when adding diethyl ether into its THF solution and the length of PANI segments is a key factor to the superstructures. AFM measurements revealed that they form spring‐like helical superstructures from the short PANI‐containing copolymers while these form fibrous helical superstructures from the longer PANI‐containing copolymer. A possible mechanism of the helical superstructures is suggested in this article and the driving force is believed the π–π stacking of the rigid segment of the copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 12–20, 2008     

AFM Study of the Self‐Assembly Behavior of Hexa‐Armed Star Polymers with a Discotic Triphenylene Core

The six‐armed polystyrenes and poly(methyl methacrylate)s with a triphenylene core showed different self‐assembling patterns, isolated cylinders for polySt on mica and highly ordered cylindrical pores for polyMMA on a silicon wafer. With a decrease of polymer concentration in tetrahydrofuran (THF), the size and height of cylinders decreased for polySt, but for polyMMA, the size and depth of the cylindrical pores increased. Slow evaporation of the solvent and a low molecular weight favored the formation of regular patterns.

AFM images of self‐assembling patterns of polySt 1a on mica (A) and of polyMMA 2a on silicon wafer (B).     

Phosphine‐free direct arylation synthesis and self‐assembled nanostructure analysis of poly(3‐hexylselenophene)

Poly(3‐hexylselenophene)s (P3Hs) with high regioregularity (RR = 92–96%), that is, regioregular poly(3‐hexylselenophene)s (rr‐P3HSs), have been synthesized under the phosphine‐free direct arylation conditions in the presence of PdCl₂ as a precatalyst. rr‐P3HS with the high molecular weight (M_n ～ 10,000) was obtained as a result of screening of direct arylation conditions. Subsequently, the influences of primary structure, molecular weight (M_n = 3900–10,000) and regioregularity (RR = 57–96%), on optical properties and self‐assembled nanostructure of P3HS were investigated. X‐ray diffraction demonstrated that molecular weight, regioregularity, and preparation method of films dominate the crystallization behavior of P3HS. Among these parameters, it was evident that a high degree of regioregularity was the most fundamental contributor to achieve pure crystalline nanostructure. Furthermore, nanoassembly based on pure crystalline nanostructure, such as non‐woven fibrous and bundle‐like spherulitic self‐assembled nanostructures, was successfully prepared in rr‐P3HS, respectively, by appropriate modulation of the aforementioned parameters. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2749–2755     

Synthesis and hierarchical superstructures of side‐chain liquid crystal polyacetylenes containing galactopyranoside end‐groups

Three kinds of chiral saccharide‐containing liquid crystalline (LC) acetylenic monomers were prepared by click reaction between 2‐azidoethyl‐2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranoside and 1‐biphenylacetylene 4‐alkynyloxybenzoate. The obtained monomers were polymerized by WCl₆‐Ph₄Sn to form three side‐chain LC polyacetylenes containing 1‐[2‐(2,3,4,6‐tetraacetyl‐β‐D ‐galactopyranos‐1‐yl)‐ethyl]‐1H‐[1,2,3]‐triazol‐4′‐biphenyl 4‐alkynyloxybenzoate side groups. All monomers and polymers show a chiral smectic A phase. Self‐assembled hiearchical superstructures of the chiral saccharide‐containing LCs and LCPs in solution state were studied by field‐emission scanning electron microscopy. Because of the LC behavior, the LC molecules exhibit a high segregation strength for phase separation in dilute solution (THF/H₂O = 1:9 v/v). The self‐assembled morphology of LC monomers was dependent upon the alkynyloxy chain length. Increasing the alkynyloxy chain length caused the self‐assembled morphology to change from a platelet‐like texture ( LC‐6 ) to helical twists morphology ( LC‐11 and LC‐12 ). Furthermore, the helical twist morphological structure can be aligned on the polyimide rubbed glass substrate to form two‐dimensional ordered helical patterns. In contrast to LC monomers, the LCP‐11 self‐assembled into much more complicate morphologies, including nanospheres and helical nanofibers. These nanofibers are evolved from the helical cables ornamented with entwining nanofibers upon natural evaporation of the solution in a mixture with a THF/methanol ratio of 3:7. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6596–6611, 2009     

Self‐assembly of supramolecular polymers into tunable helical structures

There is growing interest in the design of synthetic molecules that are able to self‐assemble into a polymeric chain with compact helical conformations, which is analogous to the folded state of natural proteins. Herein, we highlight supramolecular approach to the formation of helical architectures and their conformational changes driven by external stimuli. Helical organization in synthetic self‐assembling systems can be achieved by the various types of noncovalent interactions, which include hydrogen bonding, solvophobic effects, and metal‐ligand interactions. Since the external environment can have a large influence on the strength and configuration of noncovalent interactions between the individual components, stimulus‐induced alterations in the intramolecular noncovalent interactions can result in dynamic conformational change of the supramolecular helical structure thus, driving significant changes in the properties of the materials. Therefore, these supramolecular helices hold great promise as stimuli‐responsive materials. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1925–1935, 2008     

Heterotapes: A Persistent,Dual‐Synthon Hydrogen‐Bonding Motif

The small dinitrile anion carbamoyldicyanomethanide, [C(CN)₂‐(CONH₂)]^? (cdm), reproducibly forms a hydrogen‐bonded tape containing two different supramolecular synthons: a “heterotape”. The tape incorporates both an amide dimer and a nitrile‐containing ring. The robustness of the motif is confirmed by its persistence from an isolated tape in a separated ion‐pair structure, [K(15c5)₂](cdm)? H₂O, to its incorporation into coordination complexes of octahedral metals, thus facilitating the formation of 2D sheets. Complexes containing coligands that occupy the equatorial coordination sites, [Cu(2,2′‐py₂NH)₂(cdm)₂]? 2MeOH, [Ni(cyclam)(cdm)₂], and [Cu(cyclam)(cdm)₂]?2MeOH (cyclam=1,4,8,11‐tetraazacyclotetradecane, 2,2′‐py₂NH=di(2‐pyridyl)amine), show retention of the heterotape motif, whilst the ethylene diamine complex [Cu‐(en)₂(cdm)₂] (en=ethylene diamine) displays an alternative hydrogen‐bonding motif due to interference from the diamine ligands.     

Concentration controlled multilevel self‐assembly of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) block copolymers investigated by AFM

Concentration dependent morphology of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) copolymer aggregates in aqueous system was investigated by atomic force microscopy (AFM). The AFM results show that, at a low concentration, 4 × 10^?5 g/mL, spherical micelles occur, and unmicellized molecules are not distributed homogeneously in the copolymer aqueous solution. Unequal outspread clusters composed of wormlike aggregates are formed at a moderate copolymer concentration, 4 × 10^?4 g/mL, those wormlike aggregates are orderly packed in the clusters. At a high concentration of 0.05 g/mL, the copolymer aqueous system is indeed a gel at room temperature, outspread clusters of wormlike aggregates join together to forma network structure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1412–1418, 2008     

Properties of a novel thermal sensitive polymer based on poly(vinyl alcohol) and its layer‐by‐layer assembly

Structurally modified poly(vinyl alcohol) (PVA) was prepared as novel thermally sensitive polymers by partially acetalyzing and/or ionizing the commercially available PVA. Their aqueous solutions experience completely reversible polymer aggregation and dissolution above and below the lower critical solution temperature (LCST), respectively. The LCST of a partially acetalyzed PVA (APVA) can be readily controlled by the degree of acetalysis or the molecular weight of the starting PVA. Introduction of a small amount of cationic group onto the APVA backbone increases the LCST obviously, while the LCST is highly sensitive to NaCl concentration. Then APVA and cationic APVA multilayers are assembled on rayon to make a thermal responsive fiber. The atomic force microscopy (AFM) images of the surface reveal the increment of roughness stimulated by temperature. Copyright © 2007 John Wiley & Sons, Ltd.     

A Serum‐Resistant Low‐Generation Polyamidoamine with PEI 423 Outer Layer for Gene Delivery Vector

A new derivative of polyamidoamine and polyethylenimine, G2.5‐PEI 423 or G1.5‐PEI 423, is prepared by an amidation reaction of PAMAM G2.5 or PAMAM G1.5 using PEI 423. The polycations show a great ability to combine with pDNA to form complexes, which protect the pDNA from nuclease degradation. The polymers display stronger buffer capacity and lower cytotoxicity. The complexes have particle sizes of 120–180 nm and zeta potentials of 20–40 mV. The G2.5‐PEI 423 complexes display much higher transfection efficiencies than PAMAM G5 and Lipo‐2k, and the G1.5‐PEI 423 complexes display higher transfection efficiencies than PAMAM G4 and PEI‐25k. The complexes possess better serum‐resistant capacity. The G2.5‐PEI 423 has a great potential to be used as a serum‐resistant gene vector.

     

Photosensitive,self‐assembled ultrathin films based on diazoresin and phosphate‐containing polyanions

Photosensitive ultrathin films with phosphate‐containing polyanions and diazoresin (DR) as a polycation were fabricated with a self‐assembly technique. The phosphate‐containing polyanions were poly(sodium phosphate), phosphorylated poly(vinyl alcohol), and DNA. The fabrication process was monitored by the determination of the absorbance from DR. The surface morphology of the multilayer films was observed with atomic force microscopy. Under ultraviolet irradiation, the linkage between the layers of the films changed from being ionic to being covalent; as a result, the stability of the films toward polar solvents increased. This kind of film may have applications for biosensor devices. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 222–228, 2002     

Orienting the Demixion of a Diblock‐copolymer Using 193 nm Interferometric Lithography for the Controlled Deposition of Nanoparticles

DUV interferometric lithography and diblock copolymer self‐organization have successfully been combined to provide a simple and highly collective nanopatterning technique enabling the organization of nanoparticles over several orders of magnitude, from nanometre to millimetre. The nanostructural changes at the surface of the polymer film after thermal annealing have been monitored by AFM and the process parameters optimized for obtaining a long‐range organization of the lamellar domains. In particular, the impact of the annealing conditions and geometric parameters of the substrate patterns have been investigated. The nanopatterns resulting from the lamellar demixion of (PS‐b‐MMA) were used for a controlled deposition of nanoparticles. The affinity of the hydrophobic particles for the PS block was demonstrated, opening new doors towards the preparation of high‐density arrays of nanoparticles with potential applications in data storage.

     

Regioregular Poly(3‐hexylthiophene) in a Novel Conducting Amphiphilic Block Copolymer

Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm⁻¹, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.

     

Synthesis,self‐assembly and reversible healing of supramolecular perfluoropolyethers

The synthesis and thermomechanical properties of a novel class of self‐healing perfluoropolyethers (PFPEs) is reported. By decoration of 2‐ureido‐4[1H]‐pyrimidone end groups on the termini of low molar mass PFPE, the formation of supramolecular polymers and networks held together via hydrogen bonding associations was achieved. These novel supramolecular polymer materials exhibit a combination of enhanced modulus and elasticity, along with self‐healing properties, where rapid self‐healing time was demonstrated using dynamic rheological measurements. These types of supramolecular PFPEs are anticipated to be useful for a number of emerging areas in lubrication. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3598–3606